[PATCH 050/107] staging: comedi: ni_stc.h: tidy up Interrupt_Control_Register and bits

[H Hartley Sweeten]

Rename the CamelCase. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
 drivers/staging/comedi/drivers/ni_mio_common.c | 15 ++++++++-------
 drivers/staging/comedi/drivers/ni_pcimio.c     |  2 +-
 drivers/staging/comedi/drivers/ni_stc.h        | 20 ++++++++++----------
 3 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 5bdfb5f..fcb8362 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -354,7 +354,7 @@ static const struct mio_regmap m_series_stc_write_regmap[] = {
 	[NISTC_CLK_FOUT_REG]		= { 0x170, 2 },
 	[NISTC_IO_BIDIR_PIN_REG]	= { 0x172, 2 },
 	[NISTC_RTSI_TRIG_DIR_REG]	= { 0x174, 2 },
-	[Interrupt_Control_Register]	= { 0x176, 2 },
+	[NISTC_INT_CTRL_REG]		= { 0x176, 2 },
 	[AI_Output_Control_Register]	= { 0x178, 2 },
 	[Analog_Trigger_Etc_Register]	= { 0x17a, 2 },
 	[AI_START_STOP_Select_Register]	= { 0x17c, 2 },
@@ -5389,12 +5389,13 @@ static int ni_E_init(struct comedi_device *dev,
 
 	if (dev->irq) {
 		ni_stc_writew(dev,
-			      (irq_polarity ? Interrupt_Output_Polarity : 0) |
-			      (Interrupt_Output_On_3_Pins & 0) |
-			      Interrupt_A_Enable | Interrupt_B_Enable |
-			      Interrupt_A_Output_Select(interrupt_pin) |
-			      Interrupt_B_Output_Select(interrupt_pin),
-			      Interrupt_Control_Register);
+			      (irq_polarity ? NISTC_INT_CTRL_INT_POL : 0) |
+			      (NISTC_INT_CTRL_3PIN_INT & 0) |
+			      NISTC_INT_CTRL_INTA_ENA |
+			      NISTC_INT_CTRL_INTB_ENA |
+			      NISTC_INT_CTRL_INTA_SEL(interrupt_pin) |
+			      NISTC_INT_CTRL_INTB_SEL(interrupt_pin),
+			      NISTC_INT_CTRL_REG);
 	}
 
 	/* DMA setup */
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 1481f71a..9f4d4b1 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1085,7 +1085,7 @@ static void init_6143(struct comedi_device *dev)
 	struct ni_private *devpriv = dev->private;
 
 	/*  Disable interrupts */
-	ni_stc_writew(dev, 0, Interrupt_Control_Register);
+	ni_stc_writew(dev, 0, NISTC_INT_CTRL_REG);
 
 	/*  Initialise 6143 AI specific bits */
 
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index 8a3052e..5004691 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -285,6 +285,16 @@
 #define NISTC_RTSI_TRIG_USE_CLK		BIT(1)
 #define NISTC_RTSI_TRIG_DRV_CLK		BIT(0)
 
+#define NISTC_INT_CTRL_REG		59
+#define NISTC_INT_CTRL_INTB_ENA		BIT(15)
+#define NISTC_INT_CTRL_INTB_SEL(x)	(((x) & 0x7) << 12)
+#define NISTC_INT_CTRL_INTA_ENA		BIT(11)
+#define NISTC_INT_CTRL_INTA_SEL(x)	(((x) & 0x7) << 8)
+#define NISTC_INT_CTRL_PASSTHRU0_POL	BIT(3)
+#define NISTC_INT_CTRL_PASSTHRU1_POL	BIT(2)
+#define NISTC_INT_CTRL_3PIN_INT		BIT(1)
+#define NISTC_INT_CTRL_INT_POL		BIT(0)
+
 #define AI_Status_1_Register		2
 #define Interrupt_A_St				0x8000
 #define AI_FIFO_Full_St				0x4000
@@ -343,16 +353,6 @@ enum Joint_Status_2_Bits {
 #define AO_BC_Save_Registers		18
 #define AO_UC_Save_Registers		20
 
-#define Interrupt_Control_Register	59
-#define Interrupt_B_Enable			_bit15
-#define Interrupt_B_Output_Select(x)		((x)<<12)
-#define Interrupt_A_Enable			_bit11
-#define Interrupt_A_Output_Select(x)		((x)<<8)
-#define Pass_Thru_0_Interrupt_Polarity		_bit3
-#define Pass_Thru_1_Interrupt_Polarity		_bit2
-#define Interrupt_Output_On_3_Pins		_bit1
-#define Interrupt_Output_Polarity		_bit0
-
 #define AI_Output_Control_Register	60
 #define AI_START_Output_Select			_bit10
 #define AI_SCAN_IN_PROG_Output_Select(x)	(((x) & 0x3) << 8)
-- 
2.3.0