[PATCH V2] Staging: rtl8192 Clean up function definition

[Eddie Kovsky]

Change function definition to static, move the function further up in
the file, and delete the function prototype.

This fixes the following warning generated by sparse:

drivers/staging/rtl8192u/r8192U_core.c:1970:6: warning: symbol
'rtl8192_update_ratr_table' was not declared. Should it be static?

Signed-off-by: Eddie Kovsky <ewk at edkovsky.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 87 +++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 43 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 8834c23d67fc..f16a0a45611f 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1762,7 +1762,50 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev)
 }
 #endif
 
-static void rtl8192_update_ratr_table(struct net_device *dev);
+static void rtl8192_update_ratr_table(struct net_device *dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device *ieee = priv->ieee80211;
+	u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
+	u32 ratr_value = 0;
+	u8 rate_index = 0;
+	rtl8192_config_rate(dev, (u16 *)(&ratr_value));
+
+	ratr_value |= (*(u16 *)(pMcsRate)) << 12;
+	switch (ieee->mode) {
+	case IEEE_A:
+		ratr_value &= 0x00000FF0;
+		break;
+	case IEEE_B:
+		ratr_value &= 0x0000000F;
+		break;
+	case IEEE_G:
+		ratr_value &= 0x00000FF7;
+		break;
+	case IEEE_N_24G:
+	case IEEE_N_5G:
+		if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
+			ratr_value &= 0x0007F007;
+		} else {
+			if (priv->rf_type == RF_1T2R)
+				ratr_value &= 0x000FF007;
+			else
+				ratr_value &= 0x0F81F007;
+		}
+		break;
+	default:
+		break;
+	}
+	ratr_value &= 0x0FFFFFFF;
+	if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
+		ratr_value |= 0x80000000;
+	else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)
+		ratr_value |= 0x80000000;
+	write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
+	write_nic_byte(dev, UFWP, 1);
+}
+
+
 static void rtl8192_link_change(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1967,48 +2010,6 @@ static int rtl8192_handle_assoc_response(struct net_device *dev,
 }
 
 
-void rtl8192_update_ratr_table(struct net_device *dev)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
-	u32 ratr_value = 0;
-	u8 rate_index = 0;
-	rtl8192_config_rate(dev, (u16 *)(&ratr_value));
-	ratr_value |= (*(u16 *)(pMcsRate)) << 12;
-	switch (ieee->mode) {
-	case IEEE_A:
-		ratr_value &= 0x00000FF0;
-		break;
-	case IEEE_B:
-		ratr_value &= 0x0000000F;
-		break;
-	case IEEE_G:
-		ratr_value &= 0x00000FF7;
-		break;
-	case IEEE_N_24G:
-	case IEEE_N_5G:
-		if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
-			ratr_value &= 0x0007F007;
-		} else {
-			if (priv->rf_type == RF_1T2R)
-				ratr_value &= 0x000FF007;
-			else
-				ratr_value &= 0x0F81F007;
-		}
-		break;
-	default:
-		break;
-	}
-	ratr_value &= 0x0FFFFFFF;
-	if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
-		ratr_value |= 0x80000000;
-	else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)
-		ratr_value |= 0x80000000;
-	write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
-	write_nic_byte(dev, UFWP, 1);
-}
-
 static u8 ccmp_ie[4] = {0x00, 0x50, 0xf2, 0x04};
 static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
 static bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
-- 
2.3.4