[PATCH 4/4] dgnc: Make all lines under 80 characters in dgnc_driver.h

Giedrius Statkevičius giedrius.statkevicius at gmail.com
Sun Mar 8 23:49:47 UTC 2015


Fix comments to make lines less than 80 characters by moving them,
breaking the lines or making them neater.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius at gmail.com>
---
 drivers/staging/dgnc/dgnc_driver.h | 55 +++++++++++++++++++++++++-------------
 1 file changed, 36 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
index 734bdc2..ebb9b85 100644
--- a/drivers/staging/dgnc/dgnc_driver.h
+++ b/drivers/staging/dgnc/dgnc_driver.h
@@ -31,7 +31,7 @@
 #include <linux/tty.h>	  /* To pick up the various tty structs/defines */
 #include <linux/interrupt.h>	/* For irqreturn_t type */
 
-#include "dgnc_types.h"		/* Additional types needed by the Digi header files */
+#include "dgnc_types.h"	/* Additional types needed by the Digi header files */
 #include "digi.h"		/* Digi specific ioctl header */
 #include "dgnc_kcompat.h"	/* Kernel 2.4/2.6 compat includes */
 #include "dgnc_sysfs.h"		/* Support for SYSFS */
@@ -68,7 +68,10 @@
 #define PORT_NUM(dev)	((dev) & 0x7f)
 #define IS_PRINT(dev)	(((dev) & 0xff) >= 0x80)
 
-/* MAX number of stop characters we will send when our read queue is getting full */
+/*
+ * MAX number of stop characters we will send
+ * when our read queue is getting full
+ */
 #define MAX_STOPS_SENT 5
 
 /* 4 extra for alignment play space */
@@ -170,15 +173,20 @@ struct dgnc_board {
 	unsigned char	rev;		/* PCI revision ID */
 	uint		pci_bus;	/* PCI bus value */
 	uint		pci_slot;	/* PCI slot value */
-	uint		maxports;	/* MAX ports this board can handle */
+	uint		maxports;	/*
+					 * MAX ports this board
+					 * can handle
+					 */
 	unsigned char	dvid;		/* Board specific device id */
 	unsigned char	vpd[128];	/* VPD of board, if found */
 	unsigned char	serial_num[20];	/* Serial number of board, if found in VPD */
 
 	spinlock_t	bd_lock;	/* Used to protect board */
 
-	spinlock_t	bd_intr_lock;	/* Used to protect the poller tasklet and
-					 * the interrupt routine from each other.
+	spinlock_t	bd_intr_lock;	/*
+					 * Used to protect the poller tasklet
+					 * and the interrupt routine from
+					 * each other.
 					 */
 
 	uint		state;		/* State of card. */
@@ -197,14 +205,14 @@ struct dgnc_board {
 	ulong		membase;	/* Start of base memory of the card */
 	ulong		membase_end;	/* End of base memory of the card */
 
-	u8 __iomem		*re_map_membase;/* Remapped memory of the card */
+	u8 __iomem	*re_map_membase; /* Remapped memory of the card */
 
 	ulong		iobase;		/* Start of io base of the card */
 	ulong		iobase_end;	/* End of io base of the card */
 
 	uint		bd_uart_offset;	/* Space between each UART */
 
-	struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */
+	struct channel_t *channels[MAXPORTS]; /* Pointers to channels */
 
 	struct tty_driver	SerialDriver;
 	char		SerialName[200];
@@ -219,10 +227,10 @@ struct dgnc_board {
 
 	uint		TtyRefCnt;
 
-	char		*flipbuf;	/* Our flip buffer, alloced if board is found */
+	char		*flipbuf; /* Our flip buffer, alloced if board is found */
 
-	u16		dpatype;	/* The board "type", as defined by DPA */
-	u16		dpastatus;	/* The board "status", as defined by DPA */
+	u16		dpatype; /* The board "type", as defined by DPA */
+	u16		dpastatus; /* The board "status", as defined by DPA */
 
 	/*
 	 *	Mgmt data.
@@ -315,7 +323,7 @@ struct un_t {
  ************************************************************************/
 struct channel_t {
 	int magic;			/* Channel Magic Number		*/
-	struct dgnc_board	*ch_bd;		/* Board structure pointer      */
+	struct dgnc_board	*ch_bd;	/* Board structure pointer      */
 	struct digi_t	ch_digi;	/* Transparent Print structure  */
 	struct un_t	ch_tun;		/* Terminal unit info	   */
 	struct un_t	ch_pun;		/* Printer unit info	    */
@@ -327,7 +335,10 @@ struct channel_t {
 	uint		ch_open_count;	/* open count			*/
 	uint		ch_flags;	/* Channel flags		*/
 
-	ulong		ch_close_delay;	/* How long we should drop RTS/DTR for */
+	ulong		ch_close_delay;	/*
+					 * How long we should drop
+					 * RTS/DTR for
+					 */
 
 	ulong		ch_cpstime;	/* Time for CPS calculations    */
 
@@ -343,11 +354,11 @@ struct channel_t {
 
 	uint		ch_wopen;	/* Waiting for open process cnt */
 
-	unsigned char		ch_mostat;	/* FEP output modem status      */
-	unsigned char		ch_mistat;	/* FEP input modem status       */
+	unsigned char		ch_mostat; /* FEP output modem status      */
+	unsigned char		ch_mistat; /* FEP input modem status       */
 
-	struct neo_uart_struct __iomem *ch_neo_uart;	/* Pointer to the "mapped" UART struct */
-	struct cls_uart_struct __iomem *ch_cls_uart;	/* Pointer to the "mapped" UART struct */
+	struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */
+	struct cls_uart_struct __iomem *ch_cls_uart; /* Pointer to the "mapped" UART struct */
 
 	unsigned char	ch_cached_lsr;	/* Cached value of the LSR register */
 
@@ -371,9 +382,12 @@ struct channel_t {
 
 	unsigned char		ch_r_watermark;	/* Receive Watermark */
 
-	ulong		ch_stop_sending_break;	/* Time we should STOP sending a break */
+	ulong		ch_stop_sending_break; /*
+						* Time we should STOP
+						* sending a break
+						*/
 
-	uint		ch_stops_sent;	/* How many times I have sent a stop character
+	uint		ch_stops_sent;	/* How many times I have sent a stop char
 					 * to try to stop the other guy sending.
 					 */
 	ulong		ch_err_parity;	/* Count of parity errors on channel */
@@ -402,7 +416,10 @@ extern uint		dgnc_Major;		/* Our driver/mgmt major */
 extern int		dgnc_poll_tick;		/* Poll interval - 20 ms */
 extern spinlock_t	dgnc_global_lock;	/* Driver global spinlock */
 extern uint		dgnc_NumBoards;		/* Total number of boards */
-extern struct dgnc_board	*dgnc_Board[MAXBOARDS];	/* Array of board structs */
+extern struct dgnc_board	*dgnc_Board[MAXBOARDS];	/*
+							 * Array of board
+							 * structs
+							 */
 extern char		*dgnc_state_text[];	/* Array of state text */
 
 #endif
-- 
2.3.2



More information about the devel mailing list