[PATCH 2/6] staging: rtl8723au: rates are always set via the firmware interface
Jes.Sorensen at redhat.com
Jes.Sorensen at redhat.com
Thu Feb 26 14:51:57 UTC 2015
From: Jes Sorensen <Jes.Sorensen at redhat.com>
The only case where fw_ractrl = false was when the firmware failed to
load, and in that case we are dead in the water anyway.
Signed-off-by: Jes Sorensen <Jes.Sorensen at redhat.com>
---
drivers/staging/rtl8723au/hal/odm.c | 3 +--
.../staging/rtl8723au/hal/rtl8723a_bt-coexist.c | 28 +++++++---------------
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c | 16 +------------
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c | 1 -
drivers/staging/rtl8723au/hal/usb_halinit.c | 28 ++++++----------------
drivers/staging/rtl8723au/include/rtl8723a_hal.h | 1 -
6 files changed, 18 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/rtl8723au/hal/odm.c b/drivers/staging/rtl8723au/hal/odm.c
index 5269b46..523a5a5 100644
--- a/drivers/staging/rtl8723au/hal/odm.c
+++ b/drivers/staging/rtl8723au/hal/odm.c
@@ -1289,8 +1289,7 @@ void odm_RSSIMonitorCheck23aCE(struct dm_odm_t *pDM_Odm)
for (i = 0; i < sta_cnt; i++) {
if (PWDB_rssi[i] != (0)) {
- if (pHalData->fw_ractrl) /* Report every sta's RSSI to FW */
- rtl8723a_set_rssi_cmd(Adapter, (u8 *)&PWDB_rssi[i]);
+ rtl8723a_set_rssi_cmd(Adapter, (u8 *)&PWDB_rssi[i]);
}
}
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c b/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
index 73cfddd..e46032e 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
@@ -5796,7 +5796,7 @@ static void
btdm_1AntUpdateHalRAMask(struct rtw_adapter *padapter, u32 mac_id, u32 filter)
{
u8 init_rate = 0;
- u8 raid;
+ u8 raid, arg;
u32 mask;
u8 shortGIrate = false;
int supportRateNum = 0;
@@ -5860,26 +5860,16 @@ btdm_1AntUpdateHalRAMask(struct rtw_adapter *padapter, u32 mac_id, u32 filter)
mask &= ~filter;
init_rate = get_highest_rate_idx23a(mask)&0x3f;
- if (pHalData->fw_ractrl) {
- u8 arg = 0;
+ arg = mac_id&0x1f;/* MACID */
+ arg |= BIT(7);
+ if (true == shortGIrate)
+ arg |= BIT(5);
- arg = mac_id&0x1f;/* MACID */
- arg |= BIT(7);
- if (true == shortGIrate)
- arg |= BIT(5);
-
- RTPRINT(FBT, BT_TRACE,
- ("[BTCoex], Update FW RAID entry, MASK = 0x%08x, "
- "arg = 0x%02x\n", mask, arg));
-
- rtl8723a_set_raid_cmd(padapter, mask, arg);
- } else {
- if (shortGIrate)
- init_rate |= BIT(6);
+ RTPRINT(FBT, BT_TRACE,
+ ("[BTCoex], Update FW RAID entry, MASK = 0x%08x, "
+ "arg = 0x%02x\n", mask, arg));
- rtl8723au_write8(padapter, REG_INIDATA_RATE_SEL + mac_id,
- init_rate);
- }
+ rtl8723a_set_raid_cmd(padapter, mask, arg);
psta->init_rate = init_rate;
pdmpriv->INIDATA_RATE[mac_id] = init_rate;
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_cmd.c b/drivers/staging/rtl8723au/hal/rtl8723a_cmd.c
index 7b56411..0b77ee1 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_cmd.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_cmd.c
@@ -153,21 +153,7 @@ void rtl8723a_add_rateatid(struct rtw_adapter *pAdapter, u32 bitmap, u8 arg, u8
bitmap |= ((raid<<28)&0xf0000000);
- if (pHalData->fw_ractrl == true) {
- rtl8723a_set_raid_cmd(pAdapter, bitmap, arg);
- } else {
- u8 init_rate, shortGIrate = false;
-
- init_rate = get_highest_rate_idx23a(bitmap&0x0fffffff)&0x3f;
-
- shortGIrate = (arg&BIT(5)) ? true:false;
-
- if (shortGIrate == true)
- init_rate |= BIT(6);
-
- rtl8723au_write8(pAdapter, REG_INIDATA_RATE_SEL + macid,
- init_rate);
- }
+ rtl8723a_set_raid_cmd(pAdapter, bitmap, arg);
}
void rtl8723a_set_FwPwrMode_cmd(struct rtw_adapter *padapter, u8 Mode)
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
index a5eadd4..eb82c0b 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
@@ -1095,7 +1095,6 @@ void rtl8723a_init_default_value(struct rtw_adapter *padapter)
pdmpriv = &pHalData->dmpriv;
/* init default value */
- pHalData->fw_ractrl = false;
pHalData->bIQKInitialized = false;
if (!padapter->pwrctrlpriv.bkeepfwalive)
pHalData->LastHMEBoxNum = 0;
diff --git a/drivers/staging/rtl8723au/hal/usb_halinit.c b/drivers/staging/rtl8723au/hal/usb_halinit.c
index 319170d..17389347 100644
--- a/drivers/staging/rtl8723au/hal/usb_halinit.c
+++ b/drivers/staging/rtl8723au/hal/usb_halinit.c
@@ -572,12 +572,10 @@ int rtl8723au_hal_init(struct rtw_adapter *Adapter)
status = rtl8723a_FirmwareDownload(Adapter);
if (status != _SUCCESS) {
Adapter->bFWReady = false;
- pHalData->fw_ractrl = false;
DBG_8723A("fw download fail!\n");
goto exit;
} else {
Adapter->bFWReady = true;
- pHalData->fw_ractrl = true;
DBG_8723A("fw download ok!\n");
}
@@ -1212,7 +1210,7 @@ void rtl8723a_update_ramask(struct rtw_adapter *padapter,
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
struct wlan_bssid_ex *cur_network = &pmlmeinfo->network;
- u8 init_rate, networkType, raid;
+ u8 init_rate, networkType, raid, arg;
u32 mask, rate_bitmap;
u8 shortGIrate = false;
int supportRateNum;
@@ -1284,27 +1282,15 @@ void rtl8723a_update_ramask(struct rtw_adapter *padapter,
init_rate = get_highest_rate_idx23a(mask) & 0x3f;
- if (pHalData->fw_ractrl == true) {
- u8 arg = 0;
+ arg = mac_id & 0x1f;/* MACID */
+ arg |= BIT(7);
- arg = mac_id & 0x1f;/* MACID */
+ if (shortGIrate == true)
+ arg |= BIT(5);
- arg |= BIT(7);
+ DBG_8723A("update raid entry, mask = 0x%x, arg = 0x%x\n", mask, arg);
- if (shortGIrate == true)
- arg |= BIT(5);
-
- DBG_8723A("update raid entry, mask = 0x%x, arg = 0x%x\n",
- mask, arg);
-
- rtl8723a_set_raid_cmd(padapter, mask, arg);
- } else {
- if (shortGIrate == true)
- init_rate |= BIT(6);
-
- rtl8723au_write8(padapter, (REG_INIDATA_RATE_SEL + mac_id),
- init_rate);
- }
+ rtl8723a_set_raid_cmd(padapter, mask, arg);
/* set ra_id */
psta->raid = raid;
diff --git a/drivers/staging/rtl8723au/include/rtl8723a_hal.h b/drivers/staging/rtl8723au/include/rtl8723a_hal.h
index e146336..5841915 100644
--- a/drivers/staging/rtl8723au/include/rtl8723a_hal.h
+++ b/drivers/staging/rtl8723au/include/rtl8723a_hal.h
@@ -348,7 +348,6 @@ struct hal_data_8723a {
/* for host message to fw */
u8 LastHMEBoxNum;
- u8 fw_ractrl;
u8 RegTxPause;
/* Beacon function related global variable. */
u8 RegFwHwTxQCtrl;
--
2.1.0
More information about the devel
mailing list