[PATCH 05/13] staging: fbtft: Use standard MIPI DCS command defines for ili9340

[Priit Laes]

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes at plaes.org>
---
 drivers/staging/fbtft/fb_ili9340.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c
index e0e2539..9b24c9e 100644
--- a/drivers/staging/fbtft/fb_ili9340.c
+++ b/drivers/staging/fbtft/fb_ili9340.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -53,7 +54,7 @@ static int init_display(struct fbtft_par *par)
 
 	/* COLMOD: Pixel Format Set */
 	/* 16 bits/pixel */
-	write_reg(par, 0x3A, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
 	/* Frame Rate Control */
 	/* Division ratio = fosc, Frame Rate = 79Hz */
@@ -65,8 +66,8 @@ static int init_display(struct fbtft_par *par)
 	/* Gamma Function Disable */
 	write_reg(par, 0xF2, 0x00);
 
-	/* Gamma curve selected  */
-	write_reg(par, 0x26, 0x01);
+	/* Gamma curve selection */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 
 	/* Positive Gamma Correction */
 	write_reg(par, 0xE0,
@@ -78,27 +79,24 @@ static int init_display(struct fbtft_par *par)
 		0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
 		0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
 
-	/* Sleep OUT */
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 
 	mdelay(120);
 
-	/* Display ON */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define ILI9340_MADCTL_MV  0x20
@@ -123,7 +121,7 @@ static int set_var(struct fbtft_par *par)
 		break;
 	}
 	/* Memory Access Control  */
-	write_reg(par, 0x36, val | (par->bgr << 3));
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
 
 	return 0;
 }
-- 
2.6.4