[PATCH/v2] staging: sm750fb: Fix typo in sm750fb

Masanari Iida standby24x7 at gmail.com
Fri Apr 3 15:15:10 UTC 2015


This patch fix spelling typo in sm750fb driver.

Signed-off-by: Masanari Iida <standby24x7 at gmail.com>
---
 drivers/staging/sm750fb/ddk750_chip.c   |  2 +-
 drivers/staging/sm750fb/ddk750_dvi.h    |  2 +-
 drivers/staging/sm750fb/ddk750_help.h   |  2 +-
 drivers/staging/sm750fb/ddk750_mode.c   |  4 ++--
 drivers/staging/sm750fb/ddk750_reg.h    |  2 +-
 drivers/staging/sm750fb/ddk750_sii164.c |  4 ++--
 drivers/staging/sm750fb/ddk750_swi2c.c  |  2 +-
 drivers/staging/sm750fb/readme          |  8 ++++----
 drivers/staging/sm750fb/sm750.c         | 20 ++++++++++----------
 drivers/staging/sm750fb/sm750_accel.c   |  8 ++++----
 drivers/staging/sm750fb/sm750_accel.h   |  2 +-
 drivers/staging/sm750fb/sm750_hw.c      |  2 +-
 drivers/staging/sm750fb/sm750_hw.h      |  2 +-
 13 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index c8a8b3f..fa75c37 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -436,7 +436,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
 
 #if 1
 	if (getChipType() == SM750LE) {
-		/* SM750LE don't have prgrammable PLL and M/N values to work on.
+		/* SM750LE don't have programmable PLL and M/N values to work on.
 		Just return the requested clock. */
 		return request_orig;
 	}
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
index 50bcec2..ac4eafb 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -1,7 +1,7 @@
 #ifndef DDK750_DVI_H__
 #define DDK750_DVI_H__
 
-/* dvi chip stuffs structros */
+/* dvi chip stuffs structures */
 
 typedef long (*PFN_DVICTRL_INIT)(
     unsigned char edgeSelect,
diff --git a/drivers/staging/sm750fb/ddk750_help.h b/drivers/staging/sm750fb/ddk750_help.h
index 07c8264..e7e49ce 100644
--- a/drivers/staging/sm750fb/ddk750_help.h
+++ b/drivers/staging/sm750fb/ddk750_help.h
@@ -14,7 +14,7 @@
 #warning "big endian on target cpu and enable nature big endian support of 718 capability !"
 #define PEEK32(addr)  			__raw_readl(mmio750 + addr)
 #define POKE32(addr,data) 		__raw_writel(data, mmio750 + addr)
-#else /* software control endianess */
+#else /* software control endianness */
 #define PEEK32(addr) readl(addr + mmio750)
 #define POKE32(addr,data) writel(data, addr + mmio750)
 #endif
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 2e418fb..13c5731 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -42,7 +42,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
     dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
 
 	/* Set bit 29:27 of display control register for the right clock */
-	/* Note that SM750LE only need to supported 7 resoluitons. */
+	/* Note that SM750LE only need to supported 7 resolutions. */
 	if ( x == 800 && y == 600 )
     	dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
 	else if (x == 1024 && y == 768)
@@ -162,7 +162,7 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
 
 		/* May a hardware bug or just my test chip (not confirmed).
 		* PANEL_DISPLAY_CTRL register seems requiring few writes
-		* before a value can be succesfully written in.
+		* before a value can be successfully written in.
 		* Added some masks to mask out the reserved bits.
 		* Note: This problem happens by design. The hardware will wait for the
 		*       next vertical sync to turn on/off the plane.
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 2016f97..fd931f5 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -1892,7 +1892,7 @@
 #define CRT_PALETTE_RAM                               0x080C00
 
 /* 2D registers
- * move their defination into general lynx_accel.h file
+ * move their definition into general lynx_accel.h file
  * because all smi graphic chip share the same drawing engine
  * register format */
 #if 0
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 3d224d6..84464c1 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -256,7 +256,7 @@ long sii164InitChip(
 
 
 
-/* below sii164 function is not neccessary */
+/* below sii164 function is not necessary */
 
 #ifdef SII164_FULL_FUNCTIONS
 
@@ -388,7 +388,7 @@ unsigned char sii164IsConnected(void)
 
 /*
  *  sii164CheckInterrupt
- *      Checks if interrupt has occured.
+ *      Checks if interrupt has occurred.
  *
  *  Output:
  *      0   - No interrupt
diff --git a/drivers/staging/sm750fb/ddk750_swi2c.c b/drivers/staging/sm750fb/ddk750_swi2c.c
index 901b373..82120e9 100644
--- a/drivers/staging/sm750fb/ddk750_swi2c.c
+++ b/drivers/staging/sm750fb/ddk750_swi2c.c
@@ -31,7 +31,7 @@
  *
  * I.e. the SCL may only be changed in section 1. and section 3. while
  * the SDA may only be changed in section 2. and section 4. The table
- * below gives the changes for these 2 lines in the varios sections.
+ * below gives the changes for these 2 lines in the various sections.
  *
  * Section changes Table:
  * ======================
diff --git a/drivers/staging/sm750fb/readme b/drivers/staging/sm750fb/readme
index ab9af79..cfa4595 100644
--- a/drivers/staging/sm750fb/readme
+++ b/drivers/staging/sm750fb/readme
@@ -5,7 +5,7 @@ Introduction:
 	- 2D acceleration
 	- 16MB integrated video memory
 
-About the kernel module paramter of driver:
+About the kernel module parameter of driver:
 
 	Use 1280,8bpp index color and 60 hz mode:
 	insmod ./sm750fb.ko g_option="1280x1024-8 at 60"
@@ -20,16 +20,16 @@ About the kernel module paramter of driver:
 	and user can use con2fb to link fbX and ttyX
 
 	Notes:
-	1) if you build the driver with built-in method, the paramter
+	1) if you build the driver with built-in method, the parameter
 		you edited in the grub config file will be also the
-		same format as above modular method,but additionaly add
+		same format as above modular method,but additionally add
 		"video=sm750fb:"
 		ahead of parameters,so,it looks like:
 		video=sm750fb:noaccel,1280x1024 at 60,otherparam,etc...
 		it equal to modular method with below command:
 		insmod ./sm750fb.ko g_option="noaccel:1280x1024 at 60:otherparm:etc..."
 
-	2) if you put 800x600 into the paramter without bpp and
+	2) if you put 800x600 into the parameter without bpp and
 		refresh rate, kernel driver will defaulty use 16bpp and 60hz
 
 Important:
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 4074375..7d8371f 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -194,7 +194,7 @@ static void lynxfb_ops_fillrect(struct fb_info* info,const struct fb_fillrect* r
 
 	/*
 	 * If not use spin_lock,system will die if user load driver
-	 * and immediatly unload driver frequently (dual)
+	 * and immediately unload driver frequently (dual)
 	 */
 	if (share->dual)
 		spin_lock(&share->slock);
@@ -226,7 +226,7 @@ static void lynxfb_ops_copyarea(struct fb_info * info,const struct fb_copyarea *
 
 	/*
 	 * If not use spin_lock, system will die if user load driver
-	 * and immediatly unload driver frequently (dual)
+	 * and immediately unload driver frequently (dual)
 	 */
 	if (share->dual)
 		spin_lock(&share->slock);
@@ -273,7 +273,7 @@ static void lynxfb_ops_imageblit(struct fb_info*info,const struct fb_image* imag
 _do_work:
 	/*
 	 * If not use spin_lock, system will die if user load driver
-	 * and immediatly unload driver frequently (dual)
+	 * and immediately unload driver frequently (dual)
 	 */
 	if (share->dual)
 		spin_lock(&share->slock);
@@ -330,7 +330,7 @@ static int lynxfb_ops_set_par(struct fb_info * info)
 	var = &info->var;
 	fix = &info->fix;
 
-	/* fix structur is not so FIX ... */
+	/* fix structure is not so FIX ... */
 	line_length = var->xres_virtual * var->bits_per_pixel / 8;
 	line_length = PADDING(crtc->line_pad,line_length);
 	fix->line_length = line_length;
@@ -468,7 +468,7 @@ static int lynxfb_resume(struct pci_dev* pdev)
 	console_lock();
 
 	if((ret = pci_set_power_state(pdev, PCI_D0)) != 0){
-		pr_err("error:%d occured in pci_set_power_state\n",ret);
+		pr_err("error:%d occurred in pci_set_power_state\n",ret);
 		return ret;
 	}
 
@@ -476,7 +476,7 @@ static int lynxfb_resume(struct pci_dev* pdev)
 	if(pdev->dev.power.power_state.event != PM_EVENT_FREEZE){
 		pci_restore_state(pdev);
 		if ((ret = pci_enable_device(pdev)) != 0){
-			pr_err("error:%d occured in pci_enable_device\n",ret);
+			pr_err("error:%d occurred in pci_enable_device\n",ret);
 			return ret;
 		}
 		pci_set_master(pdev);
@@ -591,7 +591,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo* var,struct fb_info* in
 	var->height = var->width = -1;
 	var->accel_flags = 0;/*FB_ACCELF_TEXT;*/
 
-	/* check if current fb's video memory big enought to hold the onscreen */
+	/* check if current fb's video memory big enough to hold the onscreen */
 	request = var->xres_virtual * (var->bits_per_pixel >> 3);
 	/* defaulty crtc->channel go with par->index */
 
@@ -960,7 +960,7 @@ static int lynxfb_set_fbinfo(struct fb_info* info,int index)
             info->cmap.transp);
 
     if((ret = fb_alloc_cmap(&info->cmap,256,0)) < 0){
-        pr_err("Could not allcate memory for cmap.\n");
+        pr_err("Could not allocate memory for cmap.\n");
         goto exit;
     }
 
@@ -1153,7 +1153,7 @@ static int lynxfb_pci_probe(struct pci_dev * pdev,
 			pr_err("Unable to setup MTRR.\n");
 		}else{
 			share->mtrr.vram_added = 1;
-			pr_info("MTRR added succesfully\n");
+			pr_info("MTRR added successfully\n");
 		}
 	}
 #endif
@@ -1167,7 +1167,7 @@ static int lynxfb_pci_probe(struct pci_dev * pdev,
 	/* call chipInit routine */
 	hw_sm750_inithw(share,pdev);
 
-	/* allocate frame buffer info structor according to g_dualview */
+	/* allocate frame buffer info structure according to g_dualview */
 		fbidx = 0;
 ALLOC_FB:
 		info[fbidx] = framebuffer_alloc(sizeof(struct lynxfb_par),&pdev->dev);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index c5a3726..9463b70 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -53,7 +53,7 @@ void hw_de_init(struct lynx_accel * accel)
 		FIELD_CLEAR(DE_STRETCH_FORMAT,ADDRESSING)&
 		FIELD_CLEAR(DE_STRETCH_FORMAT,SOURCE_HEIGHT);
 
-	/* DE_STRETCH bpp format need be initilized in setMode routine */
+	/* DE_STRETCH bpp format need to be initialized in setMode routine */
 	write_dpr(accel,DE_STRETCH_FORMAT,(read_dpr(accel,DE_STRETCH_FORMAT) & clr) | reg);
 
 	/* disable clipping and transparent */
@@ -246,7 +246,7 @@ unsigned int rop2)   /* ROP value */
 #if 0
     /* Program pitch (distance between the 1st points of two adjacent lines).
        Note that input pitch is BYTE value, but the 2D Pitch register uses
-       pixel values. Need Byte to pixel convertion.
+       pixel values. Need Byte to pixel conversion.
     */
 	if(Bpp == 3){
 			sx *= 3;
@@ -327,7 +327,7 @@ int hw_imageblit(struct lynx_accel *accel,
 		 u32 dx,
 		 u32 dy,       /* Starting coordinate of destination surface */
 		 u32 width,
-		 u32 height,   /* width and height of rectange in pixel value */
+		 u32 height,   /* width and height of rectangle in pixel value */
 		 u32 fColor,   /* Foreground color (corresponding to a 1 in the monochrome data */
 		 u32 bColor,   /* Background color (corresponding to a 0 in the monochrome data */
 		 u32 rop2)     /* ROP value */
@@ -362,7 +362,7 @@ int hw_imageblit(struct lynx_accel *accel,
 #if 0
     /* Program pitch (distance between the 1st points of two adjacent lines).
        Note that input pitch is BYTE value, but the 2D Pitch register uses
-       pixel values. Need Byte to pixel convertion.
+       pixel values. Need Byte to pixel conversion.
     */
 	if(bytePerPixel == 3 ){
 		dx *= 3;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index 3ee0bd8..b7450b5 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -268,7 +268,7 @@ int hw_imageblit(struct lynx_accel *accel,
 		 u32 dx,
 		 u32 dy,       /* Starting coordinate of destination surface */
 		 u32 width,
-		 u32 height,   /* width and height of rectange in pixel value */
+		 u32 height,   /* width and height of rectangle in pixel value */
 		 u32 fColor,   /* Foreground color (corresponding to a 1 in the monochrome data */
 		 u32 bColor,   /* Background color (corresponding to a 0 in the monochrome data */
 		 u32 rop2);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 9f0d06d..51e11a4 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -168,7 +168,7 @@ int hw_sm750_inithw(struct lynx_share* share, struct pci_dev * pdev)
 			break;
 		}
 	}else{
-		/* for 750LE ,no DVI chip initilization makes Monitor no signal */
+		/* for 750LE ,no DVI chip initialization makes Monitor no signal */
 		/* Set up GPIO for software I2C to program DVI chip in the
 		   Xilinx SP605 board, in order to have video signal.
 		 */
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index b05be5e..c607d9b 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -65,7 +65,7 @@ struct sm750_state{
 };
 
 /* 	sm750_share stands for a presentation of two frame buffer
-	that use one sm750 adaptor, it is similiar to the super class of lynx_share
+	that use one sm750 adaptor, it is similar to the super class of lynx_share
 	in C++
 */
 
-- 
2.4.0.rc0.43.gcf8a8c6



More information about the devel mailing list