[PATCH V2 11/21] staging: crypto: skein: dos2unix, remove executable perms
Jason Cooper
jason at lakedaemon.net
Mon Mar 24 01:49:08 UTC 2014
$ find drivers/staging/skein -type f | xargs todos -d
$ chmod -x drivers/staging/skein/skeinApi.c
$ chmod -x drivers/staging/skein/include/skeinApi.h
Signed-off-by: Jason Cooper <jason at lakedaemon.net>
---
drivers/staging/skein/include/skein.h | 630 ++++++-------
drivers/staging/skein/include/skeinApi.h | 0
drivers/staging/skein/include/skein_iv.h | 398 ++++-----
drivers/staging/skein/skein.c | 1442 +++++++++++++++---------------
drivers/staging/skein/skeinApi.c | 0
drivers/staging/skein/skeinBlockNo3F.c | 344 +++----
drivers/staging/skein/skein_block.c | 1372 ++++++++++++++--------------
7 files changed, 2093 insertions(+), 2093 deletions(-)
mode change 100755 => 100644 drivers/staging/skein/include/skeinApi.h
mode change 100755 => 100644 drivers/staging/skein/skeinApi.c
diff --git a/drivers/staging/skein/include/skein.h b/drivers/staging/skein/include/skein.h
index fef29ad64c93..18bb15824e41 100644
--- a/drivers/staging/skein/include/skein.h
+++ b/drivers/staging/skein/include/skein.h
@@ -1,315 +1,315 @@
-#ifndef _SKEIN_H_
-#define _SKEIN_H_ 1
-/**************************************************************************
-**
-** Interface declarations and internal definitions for Skein hashing.
-**
-** Source code author: Doug Whiting, 2008.
-**
-** This algorithm and source code is released to the public domain.
-**
-***************************************************************************
-**
-** The following compile-time switches may be defined to control some
-** tradeoffs between speed, code size, error checking, and security.
-**
-** The "default" note explains what happens when the switch is not defined.
-**
-** SKEIN_DEBUG -- make callouts from inside Skein code
-** to examine/display intermediate values.
-** [default: no callouts (no overhead)]
-**
-** SKEIN_ERR_CHECK -- how error checking is handled inside Skein
-** code. If not defined, most error checking
-** is disabled (for performance). Otherwise,
-** the switch value is interpreted as:
-** 0: use assert() to flag errors
-** 1: return SKEIN_FAIL to flag errors
-**
-***************************************************************************/
-
-#ifndef RotL_64
-#define RotL_64(x, N) (((x) << (N)) | ((x) >> (64-(N))))
-#endif
-
-/* below two prototype assume we are handed aligned data */
-#define Skein_Put64_LSB_First(dst08, src64, bCnt) memcpy(dst08, src64, bCnt)
-#define Skein_Get64_LSB_First(dst64, src08, wCnt) memcpy(dst64, src08, 8*(wCnt))
-#define Skein_Swap64(w64) (w64)
-
-enum
- {
- SKEIN_SUCCESS = 0, /* return codes from Skein calls */
- SKEIN_FAIL = 1,
- SKEIN_BAD_HASHLEN = 2
- };
-
-#define SKEIN_MODIFIER_WORDS (2) /* number of modifier (tweak) words */
-
-#define SKEIN_256_STATE_WORDS (4)
-#define SKEIN_512_STATE_WORDS (8)
-#define SKEIN1024_STATE_WORDS (16)
-#define SKEIN_MAX_STATE_WORDS (16)
-
-#define SKEIN_256_STATE_BYTES (8*SKEIN_256_STATE_WORDS)
-#define SKEIN_512_STATE_BYTES (8*SKEIN_512_STATE_WORDS)
-#define SKEIN1024_STATE_BYTES (8*SKEIN1024_STATE_WORDS)
-
-#define SKEIN_256_STATE_BITS (64*SKEIN_256_STATE_WORDS)
-#define SKEIN_512_STATE_BITS (64*SKEIN_512_STATE_WORDS)
-#define SKEIN1024_STATE_BITS (64*SKEIN1024_STATE_WORDS)
-
-#define SKEIN_256_BLOCK_BYTES (8*SKEIN_256_STATE_WORDS)
-#define SKEIN_512_BLOCK_BYTES (8*SKEIN_512_STATE_WORDS)
-#define SKEIN1024_BLOCK_BYTES (8*SKEIN1024_STATE_WORDS)
-
-struct skein_ctx_hdr
- {
- size_t hashBitLen; /* size of hash result, in bits */
- size_t bCnt; /* current byte count in buffer b[] */
- u64 T[SKEIN_MODIFIER_WORDS]; /* tweak words: T[0]=byte cnt, T[1]=flags */
- };
-
-struct skein_256_ctx /* 256-bit Skein hash context structure */
- {
- struct skein_ctx_hdr h; /* common header context variables */
- u64 X[SKEIN_256_STATE_WORDS]; /* chaining variables */
- u8 b[SKEIN_256_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
- };
-
-struct skein_512_ctx /* 512-bit Skein hash context structure */
- {
- struct skein_ctx_hdr h; /* common header context variables */
- u64 X[SKEIN_512_STATE_WORDS]; /* chaining variables */
- u8 b[SKEIN_512_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
- };
-
-struct skein1024_ctx /* 1024-bit Skein hash context structure */
- {
- struct skein_ctx_hdr h; /* common header context variables */
- u64 X[SKEIN1024_STATE_WORDS]; /* chaining variables */
- u8 b[SKEIN1024_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
- };
-
-/* Skein APIs for (incremental) "straight hashing" */
-int Skein_256_Init(struct skein_256_ctx *ctx, size_t hashBitLen);
-int Skein_512_Init(struct skein_512_ctx *ctx, size_t hashBitLen);
-int Skein1024_Init(struct skein1024_ctx *ctx, size_t hashBitLen);
-
-int Skein_256_Update(struct skein_256_ctx *ctx, const u8 *msg, size_t msgByteCnt);
-int Skein_512_Update(struct skein_512_ctx *ctx, const u8 *msg, size_t msgByteCnt);
-int Skein1024_Update(struct skein1024_ctx *ctx, const u8 *msg, size_t msgByteCnt);
-
-int Skein_256_Final(struct skein_256_ctx *ctx, u8 *hashVal);
-int Skein_512_Final(struct skein_512_ctx *ctx, u8 *hashVal);
-int Skein1024_Final(struct skein1024_ctx *ctx, u8 *hashVal);
-
-/*
-** Skein APIs for "extended" initialization: MAC keys, tree hashing.
-** After an InitExt() call, just use Update/Final calls as with Init().
-**
-** Notes: Same parameters as _Init() calls, plus treeInfo/key/keyBytes.
-** When keyBytes == 0 and treeInfo == SKEIN_SEQUENTIAL,
-** the results of InitExt() are identical to calling Init().
-** The function Init() may be called once to "precompute" the IV for
-** a given hashBitLen value, then by saving a copy of the context
-** the IV computation may be avoided in later calls.
-** Similarly, the function InitExt() may be called once per MAC key
-** to precompute the MAC IV, then a copy of the context saved and
-** reused for each new MAC computation.
-**/
-int Skein_256_InitExt(struct skein_256_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
-int Skein_512_InitExt(struct skein_512_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
-int Skein1024_InitExt(struct skein1024_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
-
-/*
-** Skein APIs for MAC and tree hash:
-** Final_Pad: pad, do final block, but no OUTPUT type
-** Output: do just the output stage
-*/
-int Skein_256_Final_Pad(struct skein_256_ctx *ctx, u8 *hashVal);
-int Skein_512_Final_Pad(struct skein_512_ctx *ctx, u8 *hashVal);
-int Skein1024_Final_Pad(struct skein1024_ctx *ctx, u8 *hashVal);
-
-#ifndef SKEIN_TREE_HASH
-#define SKEIN_TREE_HASH (1)
-#endif
-#if SKEIN_TREE_HASH
-int Skein_256_Output(struct skein_256_ctx *ctx, u8 *hashVal);
-int Skein_512_Output(struct skein_512_ctx *ctx, u8 *hashVal);
-int Skein1024_Output(struct skein1024_ctx *ctx, u8 *hashVal);
-#endif
-
-/*****************************************************************
-** "Internal" Skein definitions
-** -- not needed for sequential hashing API, but will be
-** helpful for other uses of Skein (e.g., tree hash mode).
-** -- included here so that they can be shared between
-** reference and optimized code.
-******************************************************************/
-
-/* tweak word T[1]: bit field starting positions */
-#define SKEIN_T1_BIT(BIT) ((BIT) - 64) /* offset 64 because it's the second word */
-
-#define SKEIN_T1_POS_TREE_LVL SKEIN_T1_BIT(112) /* bits 112..118: level in hash tree */
-#define SKEIN_T1_POS_BIT_PAD SKEIN_T1_BIT(119) /* bit 119 : partial final input byte */
-#define SKEIN_T1_POS_BLK_TYPE SKEIN_T1_BIT(120) /* bits 120..125: type field */
-#define SKEIN_T1_POS_FIRST SKEIN_T1_BIT(126) /* bits 126 : first block flag */
-#define SKEIN_T1_POS_FINAL SKEIN_T1_BIT(127) /* bit 127 : final block flag */
-
-/* tweak word T[1]: flag bit definition(s) */
-#define SKEIN_T1_FLAG_FIRST (((u64) 1) << SKEIN_T1_POS_FIRST)
-#define SKEIN_T1_FLAG_FINAL (((u64) 1) << SKEIN_T1_POS_FINAL)
-#define SKEIN_T1_FLAG_BIT_PAD (((u64) 1) << SKEIN_T1_POS_BIT_PAD)
-
-/* tweak word T[1]: tree level bit field mask */
-#define SKEIN_T1_TREE_LVL_MASK (((u64)0x7F) << SKEIN_T1_POS_TREE_LVL)
-#define SKEIN_T1_TREE_LEVEL(n) (((u64) (n)) << SKEIN_T1_POS_TREE_LVL)
-
-/* tweak word T[1]: block type field */
-#define SKEIN_BLK_TYPE_KEY (0) /* key, for MAC and KDF */
-#define SKEIN_BLK_TYPE_CFG (4) /* configuration block */
-#define SKEIN_BLK_TYPE_PERS (8) /* personalization string */
-#define SKEIN_BLK_TYPE_PK (12) /* public key (for digital signature hashing) */
-#define SKEIN_BLK_TYPE_KDF (16) /* key identifier for KDF */
-#define SKEIN_BLK_TYPE_NONCE (20) /* nonce for PRNG */
-#define SKEIN_BLK_TYPE_MSG (48) /* message processing */
-#define SKEIN_BLK_TYPE_OUT (63) /* output stage */
-#define SKEIN_BLK_TYPE_MASK (63) /* bit field mask */
-
-#define SKEIN_T1_BLK_TYPE(T) (((u64) (SKEIN_BLK_TYPE_##T)) << SKEIN_T1_POS_BLK_TYPE)
-#define SKEIN_T1_BLK_TYPE_KEY SKEIN_T1_BLK_TYPE(KEY) /* key, for MAC and KDF */
-#define SKEIN_T1_BLK_TYPE_CFG SKEIN_T1_BLK_TYPE(CFG) /* configuration block */
-#define SKEIN_T1_BLK_TYPE_PERS SKEIN_T1_BLK_TYPE(PERS) /* personalization string */
-#define SKEIN_T1_BLK_TYPE_PK SKEIN_T1_BLK_TYPE(PK) /* public key (for digital signature hashing) */
-#define SKEIN_T1_BLK_TYPE_KDF SKEIN_T1_BLK_TYPE(KDF) /* key identifier for KDF */
-#define SKEIN_T1_BLK_TYPE_NONCE SKEIN_T1_BLK_TYPE(NONCE)/* nonce for PRNG */
-#define SKEIN_T1_BLK_TYPE_MSG SKEIN_T1_BLK_TYPE(MSG) /* message processing */
-#define SKEIN_T1_BLK_TYPE_OUT SKEIN_T1_BLK_TYPE(OUT) /* output stage */
-#define SKEIN_T1_BLK_TYPE_MASK SKEIN_T1_BLK_TYPE(MASK) /* field bit mask */
-
-#define SKEIN_T1_BLK_TYPE_CFG_FINAL (SKEIN_T1_BLK_TYPE_CFG | SKEIN_T1_FLAG_FINAL)
-#define SKEIN_T1_BLK_TYPE_OUT_FINAL (SKEIN_T1_BLK_TYPE_OUT | SKEIN_T1_FLAG_FINAL)
-
-#define SKEIN_VERSION (1)
-
-#ifndef SKEIN_ID_STRING_LE /* allow compile-time personalization */
-#define SKEIN_ID_STRING_LE (0x33414853) /* "SHA3" (little-endian)*/
-#endif
-
-#define SKEIN_MK_64(hi32, lo32) ((lo32) + (((u64) (hi32)) << 32))
-#define SKEIN_SCHEMA_VER SKEIN_MK_64(SKEIN_VERSION, SKEIN_ID_STRING_LE)
-#define SKEIN_KS_PARITY SKEIN_MK_64(0x1BD11BDA, 0xA9FC1A22)
-
-#define SKEIN_CFG_STR_LEN (4*8)
-
-/* bit field definitions in config block treeInfo word */
-#define SKEIN_CFG_TREE_LEAF_SIZE_POS (0)
-#define SKEIN_CFG_TREE_NODE_SIZE_POS (8)
-#define SKEIN_CFG_TREE_MAX_LEVEL_POS (16)
-
-#define SKEIN_CFG_TREE_LEAF_SIZE_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_LEAF_SIZE_POS)
-#define SKEIN_CFG_TREE_NODE_SIZE_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_NODE_SIZE_POS)
-#define SKEIN_CFG_TREE_MAX_LEVEL_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_MAX_LEVEL_POS)
-
-#define SKEIN_CFG_TREE_INFO(leaf, node, maxLvl) \
- ((((u64)(leaf)) << SKEIN_CFG_TREE_LEAF_SIZE_POS) | \
- (((u64)(node)) << SKEIN_CFG_TREE_NODE_SIZE_POS) | \
- (((u64)(maxLvl)) << SKEIN_CFG_TREE_MAX_LEVEL_POS))
-
-#define SKEIN_CFG_TREE_INFO_SEQUENTIAL SKEIN_CFG_TREE_INFO(0, 0, 0) /* use as treeInfo in InitExt() call for sequential processing */
-
-/*
-** Skein macros for getting/setting tweak words, etc.
-** These are useful for partial input bytes, hash tree init/update, etc.
-**/
-#define Skein_Get_Tweak(ctxPtr, TWK_NUM) ((ctxPtr)->h.T[TWK_NUM])
-#define Skein_Set_Tweak(ctxPtr, TWK_NUM, tVal) {(ctxPtr)->h.T[TWK_NUM] = (tVal); }
-
-#define Skein_Get_T0(ctxPtr) Skein_Get_Tweak(ctxPtr, 0)
-#define Skein_Get_T1(ctxPtr) Skein_Get_Tweak(ctxPtr, 1)
-#define Skein_Set_T0(ctxPtr, T0) Skein_Set_Tweak(ctxPtr, 0, T0)
-#define Skein_Set_T1(ctxPtr, T1) Skein_Set_Tweak(ctxPtr, 1, T1)
-
-/* set both tweak words at once */
-#define Skein_Set_T0_T1(ctxPtr, T0, T1) \
- { \
- Skein_Set_T0(ctxPtr, (T0)); \
- Skein_Set_T1(ctxPtr, (T1)); \
- }
-
-#define Skein_Set_Type(ctxPtr, BLK_TYPE) \
- Skein_Set_T1(ctxPtr, SKEIN_T1_BLK_TYPE_##BLK_TYPE)
-
-/* set up for starting with a new type: h.T[0]=0; h.T[1] = NEW_TYPE; h.bCnt=0; */
-#define Skein_Start_New_Type(ctxPtr, BLK_TYPE) \
- { Skein_Set_T0_T1(ctxPtr, 0, SKEIN_T1_FLAG_FIRST | SKEIN_T1_BLK_TYPE_##BLK_TYPE); (ctxPtr)->h.bCnt = 0; }
-
-#define Skein_Clear_First_Flag(hdr) { (hdr).T[1] &= ~SKEIN_T1_FLAG_FIRST; }
-#define Skein_Set_Bit_Pad_Flag(hdr) { (hdr).T[1] |= SKEIN_T1_FLAG_BIT_PAD; }
-
-#define Skein_Set_Tree_Level(hdr, height) { (hdr).T[1] |= SKEIN_T1_TREE_LEVEL(height); }
-
-/*****************************************************************
-** "Internal" Skein definitions for debugging and error checking
-******************************************************************/
-#ifdef SKEIN_DEBUG /* examine/display intermediate values? */
-#include "skein_debug.h"
-#else /* default is no callouts */
-#define Skein_Show_Block(bits, ctx, X, blkPtr, wPtr, ksEvenPtr, ksOddPtr)
-#define Skein_Show_Round(bits, ctx, r, X)
-#define Skein_Show_R_Ptr(bits, ctx, r, X_ptr)
-#define Skein_Show_Final(bits, ctx, cnt, outPtr)
-#define Skein_Show_Key(bits, ctx, key, keyBytes)
-#endif
-
-#define Skein_Assert(x, retCode)/* default: ignore all Asserts, for performance */
-#define Skein_assert(x)
-
-/*****************************************************************
-** Skein block function constants (shared across Ref and Opt code)
-******************************************************************/
-enum
- {
- /* Skein_256 round rotation constants */
- R_256_0_0 = 14, R_256_0_1 = 16,
- R_256_1_0 = 52, R_256_1_1 = 57,
- R_256_2_0 = 23, R_256_2_1 = 40,
- R_256_3_0 = 5, R_256_3_1 = 37,
- R_256_4_0 = 25, R_256_4_1 = 33,
- R_256_5_0 = 46, R_256_5_1 = 12,
- R_256_6_0 = 58, R_256_6_1 = 22,
- R_256_7_0 = 32, R_256_7_1 = 32,
-
- /* Skein_512 round rotation constants */
- R_512_0_0 = 46, R_512_0_1 = 36, R_512_0_2 = 19, R_512_0_3 = 37,
- R_512_1_0 = 33, R_512_1_1 = 27, R_512_1_2 = 14, R_512_1_3 = 42,
- R_512_2_0 = 17, R_512_2_1 = 49, R_512_2_2 = 36, R_512_2_3 = 39,
- R_512_3_0 = 44, R_512_3_1 = 9, R_512_3_2 = 54, R_512_3_3 = 56,
- R_512_4_0 = 39, R_512_4_1 = 30, R_512_4_2 = 34, R_512_4_3 = 24,
- R_512_5_0 = 13, R_512_5_1 = 50, R_512_5_2 = 10, R_512_5_3 = 17,
- R_512_6_0 = 25, R_512_6_1 = 29, R_512_6_2 = 39, R_512_6_3 = 43,
- R_512_7_0 = 8, R_512_7_1 = 35, R_512_7_2 = 56, R_512_7_3 = 22,
-
- /* Skein1024 round rotation constants */
- R1024_0_0 = 24, R1024_0_1 = 13, R1024_0_2 = 8, R1024_0_3 = 47, R1024_0_4 = 8, R1024_0_5 = 17, R1024_0_6 = 22, R1024_0_7 = 37,
- R1024_1_0 = 38, R1024_1_1 = 19, R1024_1_2 = 10, R1024_1_3 = 55, R1024_1_4 = 49, R1024_1_5 = 18, R1024_1_6 = 23, R1024_1_7 = 52,
- R1024_2_0 = 33, R1024_2_1 = 4, R1024_2_2 = 51, R1024_2_3 = 13, R1024_2_4 = 34, R1024_2_5 = 41, R1024_2_6 = 59, R1024_2_7 = 17,
- R1024_3_0 = 5, R1024_3_1 = 20, R1024_3_2 = 48, R1024_3_3 = 41, R1024_3_4 = 47, R1024_3_5 = 28, R1024_3_6 = 16, R1024_3_7 = 25,
- R1024_4_0 = 41, R1024_4_1 = 9, R1024_4_2 = 37, R1024_4_3 = 31, R1024_4_4 = 12, R1024_4_5 = 47, R1024_4_6 = 44, R1024_4_7 = 30,
- R1024_5_0 = 16, R1024_5_1 = 34, R1024_5_2 = 56, R1024_5_3 = 51, R1024_5_4 = 4, R1024_5_5 = 53, R1024_5_6 = 42, R1024_5_7 = 41,
- R1024_6_0 = 31, R1024_6_1 = 44, R1024_6_2 = 47, R1024_6_3 = 46, R1024_6_4 = 19, R1024_6_5 = 42, R1024_6_6 = 44, R1024_6_7 = 25,
- R1024_7_0 = 9, R1024_7_1 = 48, R1024_7_2 = 35, R1024_7_3 = 52, R1024_7_4 = 23, R1024_7_5 = 31, R1024_7_6 = 37, R1024_7_7 = 20
- };
-
-#ifndef SKEIN_ROUNDS
-#define SKEIN_256_ROUNDS_TOTAL (72) /* number of rounds for the different block sizes */
-#define SKEIN_512_ROUNDS_TOTAL (72)
-#define SKEIN1024_ROUNDS_TOTAL (80)
-#else /* allow command-line define in range 8*(5..14) */
-#define SKEIN_256_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS/100) + 5) % 10) + 5))
-#define SKEIN_512_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS/10) + 5) % 10) + 5))
-#define SKEIN1024_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS) + 5) % 10) + 5))
-#endif
-
-#endif /* ifndef _SKEIN_H_ */
+#ifndef _SKEIN_H_
+#define _SKEIN_H_ 1
+/**************************************************************************
+**
+** Interface declarations and internal definitions for Skein hashing.
+**
+** Source code author: Doug Whiting, 2008.
+**
+** This algorithm and source code is released to the public domain.
+**
+***************************************************************************
+**
+** The following compile-time switches may be defined to control some
+** tradeoffs between speed, code size, error checking, and security.
+**
+** The "default" note explains what happens when the switch is not defined.
+**
+** SKEIN_DEBUG -- make callouts from inside Skein code
+** to examine/display intermediate values.
+** [default: no callouts (no overhead)]
+**
+** SKEIN_ERR_CHECK -- how error checking is handled inside Skein
+** code. If not defined, most error checking
+** is disabled (for performance). Otherwise,
+** the switch value is interpreted as:
+** 0: use assert() to flag errors
+** 1: return SKEIN_FAIL to flag errors
+**
+***************************************************************************/
+
+#ifndef RotL_64
+#define RotL_64(x, N) (((x) << (N)) | ((x) >> (64-(N))))
+#endif
+
+/* below two prototype assume we are handed aligned data */
+#define Skein_Put64_LSB_First(dst08, src64, bCnt) memcpy(dst08, src64, bCnt)
+#define Skein_Get64_LSB_First(dst64, src08, wCnt) memcpy(dst64, src08, 8*(wCnt))
+#define Skein_Swap64(w64) (w64)
+
+enum
+ {
+ SKEIN_SUCCESS = 0, /* return codes from Skein calls */
+ SKEIN_FAIL = 1,
+ SKEIN_BAD_HASHLEN = 2
+ };
+
+#define SKEIN_MODIFIER_WORDS (2) /* number of modifier (tweak) words */
+
+#define SKEIN_256_STATE_WORDS (4)
+#define SKEIN_512_STATE_WORDS (8)
+#define SKEIN1024_STATE_WORDS (16)
+#define SKEIN_MAX_STATE_WORDS (16)
+
+#define SKEIN_256_STATE_BYTES (8*SKEIN_256_STATE_WORDS)
+#define SKEIN_512_STATE_BYTES (8*SKEIN_512_STATE_WORDS)
+#define SKEIN1024_STATE_BYTES (8*SKEIN1024_STATE_WORDS)
+
+#define SKEIN_256_STATE_BITS (64*SKEIN_256_STATE_WORDS)
+#define SKEIN_512_STATE_BITS (64*SKEIN_512_STATE_WORDS)
+#define SKEIN1024_STATE_BITS (64*SKEIN1024_STATE_WORDS)
+
+#define SKEIN_256_BLOCK_BYTES (8*SKEIN_256_STATE_WORDS)
+#define SKEIN_512_BLOCK_BYTES (8*SKEIN_512_STATE_WORDS)
+#define SKEIN1024_BLOCK_BYTES (8*SKEIN1024_STATE_WORDS)
+
+struct skein_ctx_hdr
+ {
+ size_t hashBitLen; /* size of hash result, in bits */
+ size_t bCnt; /* current byte count in buffer b[] */
+ u64 T[SKEIN_MODIFIER_WORDS]; /* tweak words: T[0]=byte cnt, T[1]=flags */
+ };
+
+struct skein_256_ctx /* 256-bit Skein hash context structure */
+ {
+ struct skein_ctx_hdr h; /* common header context variables */
+ u64 X[SKEIN_256_STATE_WORDS]; /* chaining variables */
+ u8 b[SKEIN_256_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
+ };
+
+struct skein_512_ctx /* 512-bit Skein hash context structure */
+ {
+ struct skein_ctx_hdr h; /* common header context variables */
+ u64 X[SKEIN_512_STATE_WORDS]; /* chaining variables */
+ u8 b[SKEIN_512_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
+ };
+
+struct skein1024_ctx /* 1024-bit Skein hash context structure */
+ {
+ struct skein_ctx_hdr h; /* common header context variables */
+ u64 X[SKEIN1024_STATE_WORDS]; /* chaining variables */
+ u8 b[SKEIN1024_BLOCK_BYTES]; /* partial block buffer (8-byte aligned) */
+ };
+
+/* Skein APIs for (incremental) "straight hashing" */
+int Skein_256_Init(struct skein_256_ctx *ctx, size_t hashBitLen);
+int Skein_512_Init(struct skein_512_ctx *ctx, size_t hashBitLen);
+int Skein1024_Init(struct skein1024_ctx *ctx, size_t hashBitLen);
+
+int Skein_256_Update(struct skein_256_ctx *ctx, const u8 *msg, size_t msgByteCnt);
+int Skein_512_Update(struct skein_512_ctx *ctx, const u8 *msg, size_t msgByteCnt);
+int Skein1024_Update(struct skein1024_ctx *ctx, const u8 *msg, size_t msgByteCnt);
+
+int Skein_256_Final(struct skein_256_ctx *ctx, u8 *hashVal);
+int Skein_512_Final(struct skein_512_ctx *ctx, u8 *hashVal);
+int Skein1024_Final(struct skein1024_ctx *ctx, u8 *hashVal);
+
+/*
+** Skein APIs for "extended" initialization: MAC keys, tree hashing.
+** After an InitExt() call, just use Update/Final calls as with Init().
+**
+** Notes: Same parameters as _Init() calls, plus treeInfo/key/keyBytes.
+** When keyBytes == 0 and treeInfo == SKEIN_SEQUENTIAL,
+** the results of InitExt() are identical to calling Init().
+** The function Init() may be called once to "precompute" the IV for
+** a given hashBitLen value, then by saving a copy of the context
+** the IV computation may be avoided in later calls.
+** Similarly, the function InitExt() may be called once per MAC key
+** to precompute the MAC IV, then a copy of the context saved and
+** reused for each new MAC computation.
+**/
+int Skein_256_InitExt(struct skein_256_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
+int Skein_512_InitExt(struct skein_512_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
+int Skein1024_InitExt(struct skein1024_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes);
+
+/*
+** Skein APIs for MAC and tree hash:
+** Final_Pad: pad, do final block, but no OUTPUT type
+** Output: do just the output stage
+*/
+int Skein_256_Final_Pad(struct skein_256_ctx *ctx, u8 *hashVal);
+int Skein_512_Final_Pad(struct skein_512_ctx *ctx, u8 *hashVal);
+int Skein1024_Final_Pad(struct skein1024_ctx *ctx, u8 *hashVal);
+
+#ifndef SKEIN_TREE_HASH
+#define SKEIN_TREE_HASH (1)
+#endif
+#if SKEIN_TREE_HASH
+int Skein_256_Output(struct skein_256_ctx *ctx, u8 *hashVal);
+int Skein_512_Output(struct skein_512_ctx *ctx, u8 *hashVal);
+int Skein1024_Output(struct skein1024_ctx *ctx, u8 *hashVal);
+#endif
+
+/*****************************************************************
+** "Internal" Skein definitions
+** -- not needed for sequential hashing API, but will be
+** helpful for other uses of Skein (e.g., tree hash mode).
+** -- included here so that they can be shared between
+** reference and optimized code.
+******************************************************************/
+
+/* tweak word T[1]: bit field starting positions */
+#define SKEIN_T1_BIT(BIT) ((BIT) - 64) /* offset 64 because it's the second word */
+
+#define SKEIN_T1_POS_TREE_LVL SKEIN_T1_BIT(112) /* bits 112..118: level in hash tree */
+#define SKEIN_T1_POS_BIT_PAD SKEIN_T1_BIT(119) /* bit 119 : partial final input byte */
+#define SKEIN_T1_POS_BLK_TYPE SKEIN_T1_BIT(120) /* bits 120..125: type field */
+#define SKEIN_T1_POS_FIRST SKEIN_T1_BIT(126) /* bits 126 : first block flag */
+#define SKEIN_T1_POS_FINAL SKEIN_T1_BIT(127) /* bit 127 : final block flag */
+
+/* tweak word T[1]: flag bit definition(s) */
+#define SKEIN_T1_FLAG_FIRST (((u64) 1) << SKEIN_T1_POS_FIRST)
+#define SKEIN_T1_FLAG_FINAL (((u64) 1) << SKEIN_T1_POS_FINAL)
+#define SKEIN_T1_FLAG_BIT_PAD (((u64) 1) << SKEIN_T1_POS_BIT_PAD)
+
+/* tweak word T[1]: tree level bit field mask */
+#define SKEIN_T1_TREE_LVL_MASK (((u64)0x7F) << SKEIN_T1_POS_TREE_LVL)
+#define SKEIN_T1_TREE_LEVEL(n) (((u64) (n)) << SKEIN_T1_POS_TREE_LVL)
+
+/* tweak word T[1]: block type field */
+#define SKEIN_BLK_TYPE_KEY (0) /* key, for MAC and KDF */
+#define SKEIN_BLK_TYPE_CFG (4) /* configuration block */
+#define SKEIN_BLK_TYPE_PERS (8) /* personalization string */
+#define SKEIN_BLK_TYPE_PK (12) /* public key (for digital signature hashing) */
+#define SKEIN_BLK_TYPE_KDF (16) /* key identifier for KDF */
+#define SKEIN_BLK_TYPE_NONCE (20) /* nonce for PRNG */
+#define SKEIN_BLK_TYPE_MSG (48) /* message processing */
+#define SKEIN_BLK_TYPE_OUT (63) /* output stage */
+#define SKEIN_BLK_TYPE_MASK (63) /* bit field mask */
+
+#define SKEIN_T1_BLK_TYPE(T) (((u64) (SKEIN_BLK_TYPE_##T)) << SKEIN_T1_POS_BLK_TYPE)
+#define SKEIN_T1_BLK_TYPE_KEY SKEIN_T1_BLK_TYPE(KEY) /* key, for MAC and KDF */
+#define SKEIN_T1_BLK_TYPE_CFG SKEIN_T1_BLK_TYPE(CFG) /* configuration block */
+#define SKEIN_T1_BLK_TYPE_PERS SKEIN_T1_BLK_TYPE(PERS) /* personalization string */
+#define SKEIN_T1_BLK_TYPE_PK SKEIN_T1_BLK_TYPE(PK) /* public key (for digital signature hashing) */
+#define SKEIN_T1_BLK_TYPE_KDF SKEIN_T1_BLK_TYPE(KDF) /* key identifier for KDF */
+#define SKEIN_T1_BLK_TYPE_NONCE SKEIN_T1_BLK_TYPE(NONCE)/* nonce for PRNG */
+#define SKEIN_T1_BLK_TYPE_MSG SKEIN_T1_BLK_TYPE(MSG) /* message processing */
+#define SKEIN_T1_BLK_TYPE_OUT SKEIN_T1_BLK_TYPE(OUT) /* output stage */
+#define SKEIN_T1_BLK_TYPE_MASK SKEIN_T1_BLK_TYPE(MASK) /* field bit mask */
+
+#define SKEIN_T1_BLK_TYPE_CFG_FINAL (SKEIN_T1_BLK_TYPE_CFG | SKEIN_T1_FLAG_FINAL)
+#define SKEIN_T1_BLK_TYPE_OUT_FINAL (SKEIN_T1_BLK_TYPE_OUT | SKEIN_T1_FLAG_FINAL)
+
+#define SKEIN_VERSION (1)
+
+#ifndef SKEIN_ID_STRING_LE /* allow compile-time personalization */
+#define SKEIN_ID_STRING_LE (0x33414853) /* "SHA3" (little-endian)*/
+#endif
+
+#define SKEIN_MK_64(hi32, lo32) ((lo32) + (((u64) (hi32)) << 32))
+#define SKEIN_SCHEMA_VER SKEIN_MK_64(SKEIN_VERSION, SKEIN_ID_STRING_LE)
+#define SKEIN_KS_PARITY SKEIN_MK_64(0x1BD11BDA, 0xA9FC1A22)
+
+#define SKEIN_CFG_STR_LEN (4*8)
+
+/* bit field definitions in config block treeInfo word */
+#define SKEIN_CFG_TREE_LEAF_SIZE_POS (0)
+#define SKEIN_CFG_TREE_NODE_SIZE_POS (8)
+#define SKEIN_CFG_TREE_MAX_LEVEL_POS (16)
+
+#define SKEIN_CFG_TREE_LEAF_SIZE_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_LEAF_SIZE_POS)
+#define SKEIN_CFG_TREE_NODE_SIZE_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_NODE_SIZE_POS)
+#define SKEIN_CFG_TREE_MAX_LEVEL_MSK (((u64) 0xFF) << SKEIN_CFG_TREE_MAX_LEVEL_POS)
+
+#define SKEIN_CFG_TREE_INFO(leaf, node, maxLvl) \
+ ((((u64)(leaf)) << SKEIN_CFG_TREE_LEAF_SIZE_POS) | \
+ (((u64)(node)) << SKEIN_CFG_TREE_NODE_SIZE_POS) | \
+ (((u64)(maxLvl)) << SKEIN_CFG_TREE_MAX_LEVEL_POS))
+
+#define SKEIN_CFG_TREE_INFO_SEQUENTIAL SKEIN_CFG_TREE_INFO(0, 0, 0) /* use as treeInfo in InitExt() call for sequential processing */
+
+/*
+** Skein macros for getting/setting tweak words, etc.
+** These are useful for partial input bytes, hash tree init/update, etc.
+**/
+#define Skein_Get_Tweak(ctxPtr, TWK_NUM) ((ctxPtr)->h.T[TWK_NUM])
+#define Skein_Set_Tweak(ctxPtr, TWK_NUM, tVal) {(ctxPtr)->h.T[TWK_NUM] = (tVal); }
+
+#define Skein_Get_T0(ctxPtr) Skein_Get_Tweak(ctxPtr, 0)
+#define Skein_Get_T1(ctxPtr) Skein_Get_Tweak(ctxPtr, 1)
+#define Skein_Set_T0(ctxPtr, T0) Skein_Set_Tweak(ctxPtr, 0, T0)
+#define Skein_Set_T1(ctxPtr, T1) Skein_Set_Tweak(ctxPtr, 1, T1)
+
+/* set both tweak words at once */
+#define Skein_Set_T0_T1(ctxPtr, T0, T1) \
+ { \
+ Skein_Set_T0(ctxPtr, (T0)); \
+ Skein_Set_T1(ctxPtr, (T1)); \
+ }
+
+#define Skein_Set_Type(ctxPtr, BLK_TYPE) \
+ Skein_Set_T1(ctxPtr, SKEIN_T1_BLK_TYPE_##BLK_TYPE)
+
+/* set up for starting with a new type: h.T[0]=0; h.T[1] = NEW_TYPE; h.bCnt=0; */
+#define Skein_Start_New_Type(ctxPtr, BLK_TYPE) \
+ { Skein_Set_T0_T1(ctxPtr, 0, SKEIN_T1_FLAG_FIRST | SKEIN_T1_BLK_TYPE_##BLK_TYPE); (ctxPtr)->h.bCnt = 0; }
+
+#define Skein_Clear_First_Flag(hdr) { (hdr).T[1] &= ~SKEIN_T1_FLAG_FIRST; }
+#define Skein_Set_Bit_Pad_Flag(hdr) { (hdr).T[1] |= SKEIN_T1_FLAG_BIT_PAD; }
+
+#define Skein_Set_Tree_Level(hdr, height) { (hdr).T[1] |= SKEIN_T1_TREE_LEVEL(height); }
+
+/*****************************************************************
+** "Internal" Skein definitions for debugging and error checking
+******************************************************************/
+#ifdef SKEIN_DEBUG /* examine/display intermediate values? */
+#include "skein_debug.h"
+#else /* default is no callouts */
+#define Skein_Show_Block(bits, ctx, X, blkPtr, wPtr, ksEvenPtr, ksOddPtr)
+#define Skein_Show_Round(bits, ctx, r, X)
+#define Skein_Show_R_Ptr(bits, ctx, r, X_ptr)
+#define Skein_Show_Final(bits, ctx, cnt, outPtr)
+#define Skein_Show_Key(bits, ctx, key, keyBytes)
+#endif
+
+#define Skein_Assert(x, retCode)/* default: ignore all Asserts, for performance */
+#define Skein_assert(x)
+
+/*****************************************************************
+** Skein block function constants (shared across Ref and Opt code)
+******************************************************************/
+enum
+ {
+ /* Skein_256 round rotation constants */
+ R_256_0_0 = 14, R_256_0_1 = 16,
+ R_256_1_0 = 52, R_256_1_1 = 57,
+ R_256_2_0 = 23, R_256_2_1 = 40,
+ R_256_3_0 = 5, R_256_3_1 = 37,
+ R_256_4_0 = 25, R_256_4_1 = 33,
+ R_256_5_0 = 46, R_256_5_1 = 12,
+ R_256_6_0 = 58, R_256_6_1 = 22,
+ R_256_7_0 = 32, R_256_7_1 = 32,
+
+ /* Skein_512 round rotation constants */
+ R_512_0_0 = 46, R_512_0_1 = 36, R_512_0_2 = 19, R_512_0_3 = 37,
+ R_512_1_0 = 33, R_512_1_1 = 27, R_512_1_2 = 14, R_512_1_3 = 42,
+ R_512_2_0 = 17, R_512_2_1 = 49, R_512_2_2 = 36, R_512_2_3 = 39,
+ R_512_3_0 = 44, R_512_3_1 = 9, R_512_3_2 = 54, R_512_3_3 = 56,
+ R_512_4_0 = 39, R_512_4_1 = 30, R_512_4_2 = 34, R_512_4_3 = 24,
+ R_512_5_0 = 13, R_512_5_1 = 50, R_512_5_2 = 10, R_512_5_3 = 17,
+ R_512_6_0 = 25, R_512_6_1 = 29, R_512_6_2 = 39, R_512_6_3 = 43,
+ R_512_7_0 = 8, R_512_7_1 = 35, R_512_7_2 = 56, R_512_7_3 = 22,
+
+ /* Skein1024 round rotation constants */
+ R1024_0_0 = 24, R1024_0_1 = 13, R1024_0_2 = 8, R1024_0_3 = 47, R1024_0_4 = 8, R1024_0_5 = 17, R1024_0_6 = 22, R1024_0_7 = 37,
+ R1024_1_0 = 38, R1024_1_1 = 19, R1024_1_2 = 10, R1024_1_3 = 55, R1024_1_4 = 49, R1024_1_5 = 18, R1024_1_6 = 23, R1024_1_7 = 52,
+ R1024_2_0 = 33, R1024_2_1 = 4, R1024_2_2 = 51, R1024_2_3 = 13, R1024_2_4 = 34, R1024_2_5 = 41, R1024_2_6 = 59, R1024_2_7 = 17,
+ R1024_3_0 = 5, R1024_3_1 = 20, R1024_3_2 = 48, R1024_3_3 = 41, R1024_3_4 = 47, R1024_3_5 = 28, R1024_3_6 = 16, R1024_3_7 = 25,
+ R1024_4_0 = 41, R1024_4_1 = 9, R1024_4_2 = 37, R1024_4_3 = 31, R1024_4_4 = 12, R1024_4_5 = 47, R1024_4_6 = 44, R1024_4_7 = 30,
+ R1024_5_0 = 16, R1024_5_1 = 34, R1024_5_2 = 56, R1024_5_3 = 51, R1024_5_4 = 4, R1024_5_5 = 53, R1024_5_6 = 42, R1024_5_7 = 41,
+ R1024_6_0 = 31, R1024_6_1 = 44, R1024_6_2 = 47, R1024_6_3 = 46, R1024_6_4 = 19, R1024_6_5 = 42, R1024_6_6 = 44, R1024_6_7 = 25,
+ R1024_7_0 = 9, R1024_7_1 = 48, R1024_7_2 = 35, R1024_7_3 = 52, R1024_7_4 = 23, R1024_7_5 = 31, R1024_7_6 = 37, R1024_7_7 = 20
+ };
+
+#ifndef SKEIN_ROUNDS
+#define SKEIN_256_ROUNDS_TOTAL (72) /* number of rounds for the different block sizes */
+#define SKEIN_512_ROUNDS_TOTAL (72)
+#define SKEIN1024_ROUNDS_TOTAL (80)
+#else /* allow command-line define in range 8*(5..14) */
+#define SKEIN_256_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS/100) + 5) % 10) + 5))
+#define SKEIN_512_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS/10) + 5) % 10) + 5))
+#define SKEIN1024_ROUNDS_TOTAL (8*((((SKEIN_ROUNDS) + 5) % 10) + 5))
+#endif
+
+#endif /* ifndef _SKEIN_H_ */
diff --git a/drivers/staging/skein/include/skeinApi.h b/drivers/staging/skein/include/skeinApi.h
old mode 100755
new mode 100644
diff --git a/drivers/staging/skein/include/skein_iv.h b/drivers/staging/skein/include/skein_iv.h
index aff9394551a0..813bad528e3c 100644
--- a/drivers/staging/skein/include/skein_iv.h
+++ b/drivers/staging/skein/include/skein_iv.h
@@ -1,199 +1,199 @@
-#ifndef _SKEIN_IV_H_
-#define _SKEIN_IV_H_
-
-#include <skein.h> /* get Skein macros and types */
-
-/*
-***************** Pre-computed Skein IVs *******************
-**
-** NOTE: these values are not "magic" constants, but
-** are generated using the Threefish block function.
-** They are pre-computed here only for speed; i.e., to
-** avoid the need for a Threefish call during Init().
-**
-** The IV for any fixed hash length may be pre-computed.
-** Only the most common values are included here.
-**
-************************************************************
-**/
-
-#define MK_64 SKEIN_MK_64
-
-/* blkSize = 256 bits. hashSize = 128 bits */
-const u64 SKEIN_256_IV_128[] =
- {
- MK_64(0xE1111906, 0x964D7260),
- MK_64(0x883DAAA7, 0x7C8D811C),
- MK_64(0x10080DF4, 0x91960F7A),
- MK_64(0xCCF7DDE5, 0xB45BC1C2)
- };
-
-/* blkSize = 256 bits. hashSize = 160 bits */
-const u64 SKEIN_256_IV_160[] =
- {
- MK_64(0x14202314, 0x72825E98),
- MK_64(0x2AC4E9A2, 0x5A77E590),
- MK_64(0xD47A5856, 0x8838D63E),
- MK_64(0x2DD2E496, 0x8586AB7D)
- };
-
-/* blkSize = 256 bits. hashSize = 224 bits */
-const u64 SKEIN_256_IV_224[] =
- {
- MK_64(0xC6098A8C, 0x9AE5EA0B),
- MK_64(0x876D5686, 0x08C5191C),
- MK_64(0x99CB88D7, 0xD7F53884),
- MK_64(0x384BDDB1, 0xAEDDB5DE)
- };
-
-/* blkSize = 256 bits. hashSize = 256 bits */
-const u64 SKEIN_256_IV_256[] =
- {
- MK_64(0xFC9DA860, 0xD048B449),
- MK_64(0x2FCA6647, 0x9FA7D833),
- MK_64(0xB33BC389, 0x6656840F),
- MK_64(0x6A54E920, 0xFDE8DA69)
- };
-
-/* blkSize = 512 bits. hashSize = 128 bits */
-const u64 SKEIN_512_IV_128[] =
- {
- MK_64(0xA8BC7BF3, 0x6FBF9F52),
- MK_64(0x1E9872CE, 0xBD1AF0AA),
- MK_64(0x309B1790, 0xB32190D3),
- MK_64(0xBCFBB854, 0x3F94805C),
- MK_64(0x0DA61BCD, 0x6E31B11B),
- MK_64(0x1A18EBEA, 0xD46A32E3),
- MK_64(0xA2CC5B18, 0xCE84AA82),
- MK_64(0x6982AB28, 0x9D46982D)
- };
-
-/* blkSize = 512 bits. hashSize = 160 bits */
-const u64 SKEIN_512_IV_160[] =
- {
- MK_64(0x28B81A2A, 0xE013BD91),
- MK_64(0xC2F11668, 0xB5BDF78F),
- MK_64(0x1760D8F3, 0xF6A56F12),
- MK_64(0x4FB74758, 0x8239904F),
- MK_64(0x21EDE07F, 0x7EAF5056),
- MK_64(0xD908922E, 0x63ED70B8),
- MK_64(0xB8EC76FF, 0xECCB52FA),
- MK_64(0x01A47BB8, 0xA3F27A6E)
- };
-
-/* blkSize = 512 bits. hashSize = 224 bits */
-const u64 SKEIN_512_IV_224[] =
- {
- MK_64(0xCCD06162, 0x48677224),
- MK_64(0xCBA65CF3, 0xA92339EF),
- MK_64(0x8CCD69D6, 0x52FF4B64),
- MK_64(0x398AED7B, 0x3AB890B4),
- MK_64(0x0F59D1B1, 0x457D2BD0),
- MK_64(0x6776FE65, 0x75D4EB3D),
- MK_64(0x99FBC70E, 0x997413E9),
- MK_64(0x9E2CFCCF, 0xE1C41EF7)
- };
-
-/* blkSize = 512 bits. hashSize = 256 bits */
-const u64 SKEIN_512_IV_256[] =
- {
- MK_64(0xCCD044A1, 0x2FDB3E13),
- MK_64(0xE8359030, 0x1A79A9EB),
- MK_64(0x55AEA061, 0x4F816E6F),
- MK_64(0x2A2767A4, 0xAE9B94DB),
- MK_64(0xEC06025E, 0x74DD7683),
- MK_64(0xE7A436CD, 0xC4746251),
- MK_64(0xC36FBAF9, 0x393AD185),
- MK_64(0x3EEDBA18, 0x33EDFC13)
- };
-
-/* blkSize = 512 bits. hashSize = 384 bits */
-const u64 SKEIN_512_IV_384[] =
- {
- MK_64(0xA3F6C6BF, 0x3A75EF5F),
- MK_64(0xB0FEF9CC, 0xFD84FAA4),
- MK_64(0x9D77DD66, 0x3D770CFE),
- MK_64(0xD798CBF3, 0xB468FDDA),
- MK_64(0x1BC4A666, 0x8A0E4465),
- MK_64(0x7ED7D434, 0xE5807407),
- MK_64(0x548FC1AC, 0xD4EC44D6),
- MK_64(0x266E1754, 0x6AA18FF8)
- };
-
-/* blkSize = 512 bits. hashSize = 512 bits */
-const u64 SKEIN_512_IV_512[] =
- {
- MK_64(0x4903ADFF, 0x749C51CE),
- MK_64(0x0D95DE39, 0x9746DF03),
- MK_64(0x8FD19341, 0x27C79BCE),
- MK_64(0x9A255629, 0xFF352CB1),
- MK_64(0x5DB62599, 0xDF6CA7B0),
- MK_64(0xEABE394C, 0xA9D5C3F4),
- MK_64(0x991112C7, 0x1A75B523),
- MK_64(0xAE18A40B, 0x660FCC33)
- };
-
-/* blkSize = 1024 bits. hashSize = 384 bits */
-const u64 SKEIN1024_IV_384[] =
- {
- MK_64(0x5102B6B8, 0xC1894A35),
- MK_64(0xFEEBC9E3, 0xFE8AF11A),
- MK_64(0x0C807F06, 0xE32BED71),
- MK_64(0x60C13A52, 0xB41A91F6),
- MK_64(0x9716D35D, 0xD4917C38),
- MK_64(0xE780DF12, 0x6FD31D3A),
- MK_64(0x797846B6, 0xC898303A),
- MK_64(0xB172C2A8, 0xB3572A3B),
- MK_64(0xC9BC8203, 0xA6104A6C),
- MK_64(0x65909338, 0xD75624F4),
- MK_64(0x94BCC568, 0x4B3F81A0),
- MK_64(0x3EBBF51E, 0x10ECFD46),
- MK_64(0x2DF50F0B, 0xEEB08542),
- MK_64(0x3B5A6530, 0x0DBC6516),
- MK_64(0x484B9CD2, 0x167BBCE1),
- MK_64(0x2D136947, 0xD4CBAFEA)
- };
-
-/* blkSize = 1024 bits. hashSize = 512 bits */
-const u64 SKEIN1024_IV_512[] =
- {
- MK_64(0xCAEC0E5D, 0x7C1B1B18),
- MK_64(0xA01B0E04, 0x5F03E802),
- MK_64(0x33840451, 0xED912885),
- MK_64(0x374AFB04, 0xEAEC2E1C),
- MK_64(0xDF25A0E2, 0x813581F7),
- MK_64(0xE4004093, 0x8B12F9D2),
- MK_64(0xA662D539, 0xC2ED39B6),
- MK_64(0xFA8B85CF, 0x45D8C75A),
- MK_64(0x8316ED8E, 0x29EDE796),
- MK_64(0x053289C0, 0x2E9F91B8),
- MK_64(0xC3F8EF1D, 0x6D518B73),
- MK_64(0xBDCEC3C4, 0xD5EF332E),
- MK_64(0x549A7E52, 0x22974487),
- MK_64(0x67070872, 0x5B749816),
- MK_64(0xB9CD28FB, 0xF0581BD1),
- MK_64(0x0E2940B8, 0x15804974)
- };
-
-/* blkSize = 1024 bits. hashSize = 1024 bits */
-const u64 SKEIN1024_IV_1024[] =
- {
- MK_64(0xD593DA07, 0x41E72355),
- MK_64(0x15B5E511, 0xAC73E00C),
- MK_64(0x5180E5AE, 0xBAF2C4F0),
- MK_64(0x03BD41D3, 0xFCBCAFAF),
- MK_64(0x1CAEC6FD, 0x1983A898),
- MK_64(0x6E510B8B, 0xCDD0589F),
- MK_64(0x77E2BDFD, 0xC6394ADA),
- MK_64(0xC11E1DB5, 0x24DCB0A3),
- MK_64(0xD6D14AF9, 0xC6329AB5),
- MK_64(0x6A9B0BFC, 0x6EB67E0D),
- MK_64(0x9243C60D, 0xCCFF1332),
- MK_64(0x1A1F1DDE, 0x743F02D4),
- MK_64(0x0996753C, 0x10ED0BB8),
- MK_64(0x6572DD22, 0xF2B4969A),
- MK_64(0x61FD3062, 0xD00A579A),
- MK_64(0x1DE0536E, 0x8682E539)
- };
-
-#endif /* _SKEIN_IV_H_ */
+#ifndef _SKEIN_IV_H_
+#define _SKEIN_IV_H_
+
+#include <skein.h> /* get Skein macros and types */
+
+/*
+***************** Pre-computed Skein IVs *******************
+**
+** NOTE: these values are not "magic" constants, but
+** are generated using the Threefish block function.
+** They are pre-computed here only for speed; i.e., to
+** avoid the need for a Threefish call during Init().
+**
+** The IV for any fixed hash length may be pre-computed.
+** Only the most common values are included here.
+**
+************************************************************
+**/
+
+#define MK_64 SKEIN_MK_64
+
+/* blkSize = 256 bits. hashSize = 128 bits */
+const u64 SKEIN_256_IV_128[] =
+ {
+ MK_64(0xE1111906, 0x964D7260),
+ MK_64(0x883DAAA7, 0x7C8D811C),
+ MK_64(0x10080DF4, 0x91960F7A),
+ MK_64(0xCCF7DDE5, 0xB45BC1C2)
+ };
+
+/* blkSize = 256 bits. hashSize = 160 bits */
+const u64 SKEIN_256_IV_160[] =
+ {
+ MK_64(0x14202314, 0x72825E98),
+ MK_64(0x2AC4E9A2, 0x5A77E590),
+ MK_64(0xD47A5856, 0x8838D63E),
+ MK_64(0x2DD2E496, 0x8586AB7D)
+ };
+
+/* blkSize = 256 bits. hashSize = 224 bits */
+const u64 SKEIN_256_IV_224[] =
+ {
+ MK_64(0xC6098A8C, 0x9AE5EA0B),
+ MK_64(0x876D5686, 0x08C5191C),
+ MK_64(0x99CB88D7, 0xD7F53884),
+ MK_64(0x384BDDB1, 0xAEDDB5DE)
+ };
+
+/* blkSize = 256 bits. hashSize = 256 bits */
+const u64 SKEIN_256_IV_256[] =
+ {
+ MK_64(0xFC9DA860, 0xD048B449),
+ MK_64(0x2FCA6647, 0x9FA7D833),
+ MK_64(0xB33BC389, 0x6656840F),
+ MK_64(0x6A54E920, 0xFDE8DA69)
+ };
+
+/* blkSize = 512 bits. hashSize = 128 bits */
+const u64 SKEIN_512_IV_128[] =
+ {
+ MK_64(0xA8BC7BF3, 0x6FBF9F52),
+ MK_64(0x1E9872CE, 0xBD1AF0AA),
+ MK_64(0x309B1790, 0xB32190D3),
+ MK_64(0xBCFBB854, 0x3F94805C),
+ MK_64(0x0DA61BCD, 0x6E31B11B),
+ MK_64(0x1A18EBEA, 0xD46A32E3),
+ MK_64(0xA2CC5B18, 0xCE84AA82),
+ MK_64(0x6982AB28, 0x9D46982D)
+ };
+
+/* blkSize = 512 bits. hashSize = 160 bits */
+const u64 SKEIN_512_IV_160[] =
+ {
+ MK_64(0x28B81A2A, 0xE013BD91),
+ MK_64(0xC2F11668, 0xB5BDF78F),
+ MK_64(0x1760D8F3, 0xF6A56F12),
+ MK_64(0x4FB74758, 0x8239904F),
+ MK_64(0x21EDE07F, 0x7EAF5056),
+ MK_64(0xD908922E, 0x63ED70B8),
+ MK_64(0xB8EC76FF, 0xECCB52FA),
+ MK_64(0x01A47BB8, 0xA3F27A6E)
+ };
+
+/* blkSize = 512 bits. hashSize = 224 bits */
+const u64 SKEIN_512_IV_224[] =
+ {
+ MK_64(0xCCD06162, 0x48677224),
+ MK_64(0xCBA65CF3, 0xA92339EF),
+ MK_64(0x8CCD69D6, 0x52FF4B64),
+ MK_64(0x398AED7B, 0x3AB890B4),
+ MK_64(0x0F59D1B1, 0x457D2BD0),
+ MK_64(0x6776FE65, 0x75D4EB3D),
+ MK_64(0x99FBC70E, 0x997413E9),
+ MK_64(0x9E2CFCCF, 0xE1C41EF7)
+ };
+
+/* blkSize = 512 bits. hashSize = 256 bits */
+const u64 SKEIN_512_IV_256[] =
+ {
+ MK_64(0xCCD044A1, 0x2FDB3E13),
+ MK_64(0xE8359030, 0x1A79A9EB),
+ MK_64(0x55AEA061, 0x4F816E6F),
+ MK_64(0x2A2767A4, 0xAE9B94DB),
+ MK_64(0xEC06025E, 0x74DD7683),
+ MK_64(0xE7A436CD, 0xC4746251),
+ MK_64(0xC36FBAF9, 0x393AD185),
+ MK_64(0x3EEDBA18, 0x33EDFC13)
+ };
+
+/* blkSize = 512 bits. hashSize = 384 bits */
+const u64 SKEIN_512_IV_384[] =
+ {
+ MK_64(0xA3F6C6BF, 0x3A75EF5F),
+ MK_64(0xB0FEF9CC, 0xFD84FAA4),
+ MK_64(0x9D77DD66, 0x3D770CFE),
+ MK_64(0xD798CBF3, 0xB468FDDA),
+ MK_64(0x1BC4A666, 0x8A0E4465),
+ MK_64(0x7ED7D434, 0xE5807407),
+ MK_64(0x548FC1AC, 0xD4EC44D6),
+ MK_64(0x266E1754, 0x6AA18FF8)
+ };
+
+/* blkSize = 512 bits. hashSize = 512 bits */
+const u64 SKEIN_512_IV_512[] =
+ {
+ MK_64(0x4903ADFF, 0x749C51CE),
+ MK_64(0x0D95DE39, 0x9746DF03),
+ MK_64(0x8FD19341, 0x27C79BCE),
+ MK_64(0x9A255629, 0xFF352CB1),
+ MK_64(0x5DB62599, 0xDF6CA7B0),
+ MK_64(0xEABE394C, 0xA9D5C3F4),
+ MK_64(0x991112C7, 0x1A75B523),
+ MK_64(0xAE18A40B, 0x660FCC33)
+ };
+
+/* blkSize = 1024 bits. hashSize = 384 bits */
+const u64 SKEIN1024_IV_384[] =
+ {
+ MK_64(0x5102B6B8, 0xC1894A35),
+ MK_64(0xFEEBC9E3, 0xFE8AF11A),
+ MK_64(0x0C807F06, 0xE32BED71),
+ MK_64(0x60C13A52, 0xB41A91F6),
+ MK_64(0x9716D35D, 0xD4917C38),
+ MK_64(0xE780DF12, 0x6FD31D3A),
+ MK_64(0x797846B6, 0xC898303A),
+ MK_64(0xB172C2A8, 0xB3572A3B),
+ MK_64(0xC9BC8203, 0xA6104A6C),
+ MK_64(0x65909338, 0xD75624F4),
+ MK_64(0x94BCC568, 0x4B3F81A0),
+ MK_64(0x3EBBF51E, 0x10ECFD46),
+ MK_64(0x2DF50F0B, 0xEEB08542),
+ MK_64(0x3B5A6530, 0x0DBC6516),
+ MK_64(0x484B9CD2, 0x167BBCE1),
+ MK_64(0x2D136947, 0xD4CBAFEA)
+ };
+
+/* blkSize = 1024 bits. hashSize = 512 bits */
+const u64 SKEIN1024_IV_512[] =
+ {
+ MK_64(0xCAEC0E5D, 0x7C1B1B18),
+ MK_64(0xA01B0E04, 0x5F03E802),
+ MK_64(0x33840451, 0xED912885),
+ MK_64(0x374AFB04, 0xEAEC2E1C),
+ MK_64(0xDF25A0E2, 0x813581F7),
+ MK_64(0xE4004093, 0x8B12F9D2),
+ MK_64(0xA662D539, 0xC2ED39B6),
+ MK_64(0xFA8B85CF, 0x45D8C75A),
+ MK_64(0x8316ED8E, 0x29EDE796),
+ MK_64(0x053289C0, 0x2E9F91B8),
+ MK_64(0xC3F8EF1D, 0x6D518B73),
+ MK_64(0xBDCEC3C4, 0xD5EF332E),
+ MK_64(0x549A7E52, 0x22974487),
+ MK_64(0x67070872, 0x5B749816),
+ MK_64(0xB9CD28FB, 0xF0581BD1),
+ MK_64(0x0E2940B8, 0x15804974)
+ };
+
+/* blkSize = 1024 bits. hashSize = 1024 bits */
+const u64 SKEIN1024_IV_1024[] =
+ {
+ MK_64(0xD593DA07, 0x41E72355),
+ MK_64(0x15B5E511, 0xAC73E00C),
+ MK_64(0x5180E5AE, 0xBAF2C4F0),
+ MK_64(0x03BD41D3, 0xFCBCAFAF),
+ MK_64(0x1CAEC6FD, 0x1983A898),
+ MK_64(0x6E510B8B, 0xCDD0589F),
+ MK_64(0x77E2BDFD, 0xC6394ADA),
+ MK_64(0xC11E1DB5, 0x24DCB0A3),
+ MK_64(0xD6D14AF9, 0xC6329AB5),
+ MK_64(0x6A9B0BFC, 0x6EB67E0D),
+ MK_64(0x9243C60D, 0xCCFF1332),
+ MK_64(0x1A1F1DDE, 0x743F02D4),
+ MK_64(0x0996753C, 0x10ED0BB8),
+ MK_64(0x6572DD22, 0xF2B4969A),
+ MK_64(0x61FD3062, 0xD00A579A),
+ MK_64(0x1DE0536E, 0x8682E539)
+ };
+
+#endif /* _SKEIN_IV_H_ */
diff --git a/drivers/staging/skein/skein.c b/drivers/staging/skein/skein.c
index 0ea0a6aeb168..e2e5685157a0 100644
--- a/drivers/staging/skein/skein.c
+++ b/drivers/staging/skein/skein.c
@@ -1,721 +1,721 @@
-/***********************************************************************
-**
-** Implementation of the Skein hash function.
-**
-** Source code author: Doug Whiting, 2008.
-**
-** This algorithm and source code is released to the public domain.
-**
-************************************************************************/
-
-#define SKEIN_PORT_CODE /* instantiate any code in skein_port.h */
-
-#include <linux/string.h> /* get the memcpy/memset functions */
-#include <skein.h> /* get the Skein API definitions */
-#include <skein_iv.h> /* get precomputed IVs */
-
-/*****************************************************************/
-/* External function to process blkCnt (nonzero) full block(s) of data. */
-void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
-void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
-void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
-
-/*****************************************************************/
-/* 256-bit Skein */
-/*****************************************************************/
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a straight hashing operation */
-int Skein_256_Init(struct skein_256_ctx *ctx, size_t hashBitLen)
-{
- union
- {
- u8 b[SKEIN_256_STATE_BYTES];
- u64 w[SKEIN_256_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
-
- switch (hashBitLen)
- { /* use pre-computed values, where available */
- case 256:
- memcpy(ctx->X, SKEIN_256_IV_256, sizeof(ctx->X));
- break;
- case 224:
- memcpy(ctx->X, SKEIN_256_IV_224, sizeof(ctx->X));
- break;
- case 160:
- memcpy(ctx->X, SKEIN_256_IV_160, sizeof(ctx->X));
- break;
- case 128:
- memcpy(ctx->X, SKEIN_256_IV_128, sizeof(ctx->X));
- break;
- default:
- /* here if there is no precomputed IV value available */
- /* build/process the config block, type == CONFIG (could be precomputed) */
- Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
-
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
- memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
-
- /* compute the initial chaining values from config block */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
- Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
- break;
- }
- /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a MAC and/or tree hash operation */
-/* [identical to Skein_256_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
-int Skein_256_InitExt(struct skein_256_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
-{
- union
- {
- u8 b[SKEIN_256_STATE_BYTES];
- u64 w[SKEIN_256_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
-
- /* compute the initial chaining values ctx->X[], based on key */
- if (keyBytes == 0) /* is there a key? */
- {
- memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
- }
- else /* here to pre-process a key */
- {
- Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
- /* do a mini-Init right here */
- ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
- Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
- Skein_256_Update(ctx, key, keyBytes); /* hash the key */
- Skein_256_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
- memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
- }
- /* build/process the config block, type == CONFIG (could be precomputed for each key) */
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
- Skein_Start_New_Type(ctx, CFG_FINAL);
-
- memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
-
- Skein_Show_Key(256, &ctx->h, key, keyBytes);
-
- /* compute the initial chaining values from config block */
- Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
-
- /* The chaining vars ctx->X are now initialized */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG);
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* process the input bytes */
-int Skein_256_Update(struct skein_256_ctx *ctx, const u8 *msg, size_t msgByteCnt)
-{
- size_t n;
-
- Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* process full blocks, if any */
- if (msgByteCnt + ctx->h.bCnt > SKEIN_256_BLOCK_BYTES)
- {
- if (ctx->h.bCnt) /* finish up any buffered message data */
- {
- n = SKEIN_256_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
- if (n)
- {
- Skein_assert(n < msgByteCnt); /* check on our logic here */
- memcpy(&ctx->b[ctx->h.bCnt], msg, n);
- msgByteCnt -= n;
- msg += n;
- ctx->h.bCnt += n;
- }
- Skein_assert(ctx->h.bCnt == SKEIN_256_BLOCK_BYTES);
- Skein_256_Process_Block(ctx, ctx->b, 1, SKEIN_256_BLOCK_BYTES);
- ctx->h.bCnt = 0;
- }
- /* now process any remaining full blocks, directly from input message data */
- if (msgByteCnt > SKEIN_256_BLOCK_BYTES)
- {
- n = (msgByteCnt-1) / SKEIN_256_BLOCK_BYTES; /* number of full blocks to process */
- Skein_256_Process_Block(ctx, msg, n, SKEIN_256_BLOCK_BYTES);
- msgByteCnt -= n * SKEIN_256_BLOCK_BYTES;
- msg += n * SKEIN_256_BLOCK_BYTES;
- }
- Skein_assert(ctx->h.bCnt == 0);
- }
-
- /* copy any remaining source message data bytes into b[] */
- if (msgByteCnt)
- {
- Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES);
- memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
- ctx->h.bCnt += msgByteCnt;
- }
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the result */
-int Skein_256_Final(struct skein_256_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN_256_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_256_BLOCK_BYTES - ctx->h.bCnt);
-
- Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN_256_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein_256_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN_256_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN_256_BLOCK_BYTES)
- n = SKEIN_256_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN_256_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_256_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-
-/*****************************************************************/
-/* 512-bit Skein */
-/*****************************************************************/
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a straight hashing operation */
-int Skein_512_Init(struct skein_512_ctx *ctx, size_t hashBitLen)
-{
- union
- {
- u8 b[SKEIN_512_STATE_BYTES];
- u64 w[SKEIN_512_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
-
- switch (hashBitLen)
- { /* use pre-computed values, where available */
- case 512:
- memcpy(ctx->X, SKEIN_512_IV_512, sizeof(ctx->X));
- break;
- case 384:
- memcpy(ctx->X, SKEIN_512_IV_384, sizeof(ctx->X));
- break;
- case 256:
- memcpy(ctx->X, SKEIN_512_IV_256, sizeof(ctx->X));
- break;
- case 224:
- memcpy(ctx->X, SKEIN_512_IV_224, sizeof(ctx->X));
- break;
- default:
- /* here if there is no precomputed IV value available */
- /* build/process the config block, type == CONFIG (could be precomputed) */
- Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
-
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
- memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
-
- /* compute the initial chaining values from config block */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
- Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
- break;
- }
-
- /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a MAC and/or tree hash operation */
-/* [identical to Skein_512_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
-int Skein_512_InitExt(struct skein_512_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
-{
- union
- {
- u8 b[SKEIN_512_STATE_BYTES];
- u64 w[SKEIN_512_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
-
- /* compute the initial chaining values ctx->X[], based on key */
- if (keyBytes == 0) /* is there a key? */
- {
- memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
- }
- else /* here to pre-process a key */
- {
- Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
- /* do a mini-Init right here */
- ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
- Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
- Skein_512_Update(ctx, key, keyBytes); /* hash the key */
- Skein_512_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
- memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
- }
- /* build/process the config block, type == CONFIG (could be precomputed for each key) */
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
- Skein_Start_New_Type(ctx, CFG_FINAL);
-
- memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
-
- Skein_Show_Key(512, &ctx->h, key, keyBytes);
-
- /* compute the initial chaining values from config block */
- Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
-
- /* The chaining vars ctx->X are now initialized */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG);
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* process the input bytes */
-int Skein_512_Update(struct skein_512_ctx *ctx, const u8 *msg, size_t msgByteCnt)
-{
- size_t n;
-
- Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* process full blocks, if any */
- if (msgByteCnt + ctx->h.bCnt > SKEIN_512_BLOCK_BYTES)
- {
- if (ctx->h.bCnt) /* finish up any buffered message data */
- {
- n = SKEIN_512_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
- if (n)
- {
- Skein_assert(n < msgByteCnt); /* check on our logic here */
- memcpy(&ctx->b[ctx->h.bCnt], msg, n);
- msgByteCnt -= n;
- msg += n;
- ctx->h.bCnt += n;
- }
- Skein_assert(ctx->h.bCnt == SKEIN_512_BLOCK_BYTES);
- Skein_512_Process_Block(ctx, ctx->b, 1, SKEIN_512_BLOCK_BYTES);
- ctx->h.bCnt = 0;
- }
- /* now process any remaining full blocks, directly from input message data */
- if (msgByteCnt > SKEIN_512_BLOCK_BYTES)
- {
- n = (msgByteCnt-1) / SKEIN_512_BLOCK_BYTES; /* number of full blocks to process */
- Skein_512_Process_Block(ctx, msg, n, SKEIN_512_BLOCK_BYTES);
- msgByteCnt -= n * SKEIN_512_BLOCK_BYTES;
- msg += n * SKEIN_512_BLOCK_BYTES;
- }
- Skein_assert(ctx->h.bCnt == 0);
- }
-
- /* copy any remaining source message data bytes into b[] */
- if (msgByteCnt)
- {
- Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES);
- memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
- ctx->h.bCnt += msgByteCnt;
- }
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the result */
-int Skein_512_Final(struct skein_512_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN_512_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_512_BLOCK_BYTES - ctx->h.bCnt);
-
- Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN_512_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein_512_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN_512_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN_512_BLOCK_BYTES)
- n = SKEIN_512_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN_512_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(512, &ctx->h, n, hashVal+i*SKEIN_512_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-
-/*****************************************************************/
-/* 1024-bit Skein */
-/*****************************************************************/
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a straight hashing operation */
-int Skein1024_Init(struct skein1024_ctx *ctx, size_t hashBitLen)
-{
- union
- {
- u8 b[SKEIN1024_STATE_BYTES];
- u64 w[SKEIN1024_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
-
- switch (hashBitLen)
- { /* use pre-computed values, where available */
- case 512:
- memcpy(ctx->X, SKEIN1024_IV_512, sizeof(ctx->X));
- break;
- case 384:
- memcpy(ctx->X, SKEIN1024_IV_384, sizeof(ctx->X));
- break;
- case 1024:
- memcpy(ctx->X, SKEIN1024_IV_1024, sizeof(ctx->X));
- break;
- default:
- /* here if there is no precomputed IV value available */
- /* build/process the config block, type == CONFIG (could be precomputed) */
- Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
-
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
- memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
-
- /* compute the initial chaining values from config block */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
- Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
- break;
- }
-
- /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* init the context for a MAC and/or tree hash operation */
-/* [identical to Skein1024_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
-int Skein1024_InitExt(struct skein1024_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
-{
- union
- {
- u8 b[SKEIN1024_STATE_BYTES];
- u64 w[SKEIN1024_STATE_WORDS];
- } cfg; /* config block */
-
- Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
- Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
-
- /* compute the initial chaining values ctx->X[], based on key */
- if (keyBytes == 0) /* is there a key? */
- {
- memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
- }
- else /* here to pre-process a key */
- {
- Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
- /* do a mini-Init right here */
- ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
- Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
- memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
- Skein1024_Update(ctx, key, keyBytes); /* hash the key */
- Skein1024_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
- memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
- }
- /* build/process the config block, type == CONFIG (could be precomputed for each key) */
- ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
- Skein_Start_New_Type(ctx, CFG_FINAL);
-
- memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
- cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
- cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
- cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
-
- Skein_Show_Key(1024, &ctx->h, key, keyBytes);
-
- /* compute the initial chaining values from config block */
- Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
-
- /* The chaining vars ctx->X are now initialized */
- /* Set up to process the data message portion of the hash (default) */
- Skein_Start_New_Type(ctx, MSG);
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* process the input bytes */
-int Skein1024_Update(struct skein1024_ctx *ctx, const u8 *msg, size_t msgByteCnt)
-{
- size_t n;
-
- Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* process full blocks, if any */
- if (msgByteCnt + ctx->h.bCnt > SKEIN1024_BLOCK_BYTES)
- {
- if (ctx->h.bCnt) /* finish up any buffered message data */
- {
- n = SKEIN1024_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
- if (n)
- {
- Skein_assert(n < msgByteCnt); /* check on our logic here */
- memcpy(&ctx->b[ctx->h.bCnt], msg, n);
- msgByteCnt -= n;
- msg += n;
- ctx->h.bCnt += n;
- }
- Skein_assert(ctx->h.bCnt == SKEIN1024_BLOCK_BYTES);
- Skein1024_Process_Block(ctx, ctx->b, 1, SKEIN1024_BLOCK_BYTES);
- ctx->h.bCnt = 0;
- }
- /* now process any remaining full blocks, directly from input message data */
- if (msgByteCnt > SKEIN1024_BLOCK_BYTES)
- {
- n = (msgByteCnt-1) / SKEIN1024_BLOCK_BYTES; /* number of full blocks to process */
- Skein1024_Process_Block(ctx, msg, n, SKEIN1024_BLOCK_BYTES);
- msgByteCnt -= n * SKEIN1024_BLOCK_BYTES;
- msg += n * SKEIN1024_BLOCK_BYTES;
- }
- Skein_assert(ctx->h.bCnt == 0);
- }
-
- /* copy any remaining source message data bytes into b[] */
- if (msgByteCnt)
- {
- Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES);
- memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
- ctx->h.bCnt += msgByteCnt;
- }
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the result */
-int Skein1024_Final(struct skein1024_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN1024_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN1024_BLOCK_BYTES - ctx->h.bCnt);
-
- Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN1024_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein1024_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN1024_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN1024_BLOCK_BYTES)
- n = SKEIN1024_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN1024_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(1024, &ctx->h, n, hashVal+i*SKEIN1024_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-
-/**************** Functions to support MAC/tree hashing ***************/
-/* (this code is identical for Optimized and Reference versions) */
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the block, no OUTPUT stage */
-int Skein_256_Final_Pad(struct skein_256_ctx *ctx, u8 *hashVal)
-{
- Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_256_BLOCK_BYTES - ctx->h.bCnt);
- Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_256_BLOCK_BYTES); /* "output" the state bytes */
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the block, no OUTPUT stage */
-int Skein_512_Final_Pad(struct skein_512_ctx *ctx, u8 *hashVal)
-{
- Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_512_BLOCK_BYTES - ctx->h.bCnt);
- Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_512_BLOCK_BYTES); /* "output" the state bytes */
-
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* finalize the hash computation and output the block, no OUTPUT stage */
-int Skein1024_Final_Pad(struct skein1024_ctx *ctx, u8 *hashVal)
-{
- Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
- if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) /* zero pad b[] if necessary */
- memset(&ctx->b[ctx->h.bCnt], 0, SKEIN1024_BLOCK_BYTES - ctx->h.bCnt);
- Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
-
- Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN1024_BLOCK_BYTES); /* "output" the state bytes */
-
- return SKEIN_SUCCESS;
-}
-
-#if SKEIN_TREE_HASH
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* just do the OUTPUT stage */
-int Skein_256_Output(struct skein_256_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN_256_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN_256_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein_256_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN_256_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN_256_BLOCK_BYTES)
- n = SKEIN_256_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN_256_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_256_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* just do the OUTPUT stage */
-int Skein_512_Output(struct skein_512_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN_512_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN_512_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein_512_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN_512_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN_512_BLOCK_BYTES)
- n = SKEIN_512_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN_512_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_512_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-/* just do the OUTPUT stage */
-int Skein1024_Output(struct skein1024_ctx *ctx, u8 *hashVal)
-{
- size_t i, n, byteCnt;
- u64 X[SKEIN1024_STATE_WORDS];
- Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
-
- /* now output the result */
- byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
-
- /* run Threefish in "counter mode" to generate output */
- memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
- memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
- for (i = 0; i*SKEIN1024_BLOCK_BYTES < byteCnt; i++)
- {
- ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
- Skein_Start_New_Type(ctx, OUT_FINAL);
- Skein1024_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
- n = byteCnt - i*SKEIN1024_BLOCK_BYTES; /* number of output bytes left to go */
- if (n >= SKEIN1024_BLOCK_BYTES)
- n = SKEIN1024_BLOCK_BYTES;
- Skein_Put64_LSB_First(hashVal+i*SKEIN1024_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
- Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN1024_BLOCK_BYTES);
- memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
- }
- return SKEIN_SUCCESS;
-}
-#endif
+/***********************************************************************
+**
+** Implementation of the Skein hash function.
+**
+** Source code author: Doug Whiting, 2008.
+**
+** This algorithm and source code is released to the public domain.
+**
+************************************************************************/
+
+#define SKEIN_PORT_CODE /* instantiate any code in skein_port.h */
+
+#include <linux/string.h> /* get the memcpy/memset functions */
+#include <skein.h> /* get the Skein API definitions */
+#include <skein_iv.h> /* get precomputed IVs */
+
+/*****************************************************************/
+/* External function to process blkCnt (nonzero) full block(s) of data. */
+void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
+void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
+void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd);
+
+/*****************************************************************/
+/* 256-bit Skein */
+/*****************************************************************/
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a straight hashing operation */
+int Skein_256_Init(struct skein_256_ctx *ctx, size_t hashBitLen)
+{
+ union
+ {
+ u8 b[SKEIN_256_STATE_BYTES];
+ u64 w[SKEIN_256_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+
+ switch (hashBitLen)
+ { /* use pre-computed values, where available */
+ case 256:
+ memcpy(ctx->X, SKEIN_256_IV_256, sizeof(ctx->X));
+ break;
+ case 224:
+ memcpy(ctx->X, SKEIN_256_IV_224, sizeof(ctx->X));
+ break;
+ case 160:
+ memcpy(ctx->X, SKEIN_256_IV_160, sizeof(ctx->X));
+ break;
+ case 128:
+ memcpy(ctx->X, SKEIN_256_IV_128, sizeof(ctx->X));
+ break;
+ default:
+ /* here if there is no precomputed IV value available */
+ /* build/process the config block, type == CONFIG (could be precomputed) */
+ Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
+
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
+ memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
+
+ /* compute the initial chaining values from config block */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
+ Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+ break;
+ }
+ /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a MAC and/or tree hash operation */
+/* [identical to Skein_256_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
+int Skein_256_InitExt(struct skein_256_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
+{
+ union
+ {
+ u8 b[SKEIN_256_STATE_BYTES];
+ u64 w[SKEIN_256_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
+
+ /* compute the initial chaining values ctx->X[], based on key */
+ if (keyBytes == 0) /* is there a key? */
+ {
+ memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
+ }
+ else /* here to pre-process a key */
+ {
+ Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
+ /* do a mini-Init right here */
+ ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
+ Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
+ Skein_256_Update(ctx, key, keyBytes); /* hash the key */
+ Skein_256_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
+ memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
+ }
+ /* build/process the config block, type == CONFIG (could be precomputed for each key) */
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+ Skein_Start_New_Type(ctx, CFG_FINAL);
+
+ memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
+
+ Skein_Show_Key(256, &ctx->h, key, keyBytes);
+
+ /* compute the initial chaining values from config block */
+ Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+
+ /* The chaining vars ctx->X are now initialized */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG);
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* process the input bytes */
+int Skein_256_Update(struct skein_256_ctx *ctx, const u8 *msg, size_t msgByteCnt)
+{
+ size_t n;
+
+ Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* process full blocks, if any */
+ if (msgByteCnt + ctx->h.bCnt > SKEIN_256_BLOCK_BYTES)
+ {
+ if (ctx->h.bCnt) /* finish up any buffered message data */
+ {
+ n = SKEIN_256_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
+ if (n)
+ {
+ Skein_assert(n < msgByteCnt); /* check on our logic here */
+ memcpy(&ctx->b[ctx->h.bCnt], msg, n);
+ msgByteCnt -= n;
+ msg += n;
+ ctx->h.bCnt += n;
+ }
+ Skein_assert(ctx->h.bCnt == SKEIN_256_BLOCK_BYTES);
+ Skein_256_Process_Block(ctx, ctx->b, 1, SKEIN_256_BLOCK_BYTES);
+ ctx->h.bCnt = 0;
+ }
+ /* now process any remaining full blocks, directly from input message data */
+ if (msgByteCnt > SKEIN_256_BLOCK_BYTES)
+ {
+ n = (msgByteCnt-1) / SKEIN_256_BLOCK_BYTES; /* number of full blocks to process */
+ Skein_256_Process_Block(ctx, msg, n, SKEIN_256_BLOCK_BYTES);
+ msgByteCnt -= n * SKEIN_256_BLOCK_BYTES;
+ msg += n * SKEIN_256_BLOCK_BYTES;
+ }
+ Skein_assert(ctx->h.bCnt == 0);
+ }
+
+ /* copy any remaining source message data bytes into b[] */
+ if (msgByteCnt)
+ {
+ Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES);
+ memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
+ ctx->h.bCnt += msgByteCnt;
+ }
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the result */
+int Skein_256_Final(struct skein_256_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN_256_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_256_BLOCK_BYTES - ctx->h.bCnt);
+
+ Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN_256_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein_256_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN_256_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN_256_BLOCK_BYTES)
+ n = SKEIN_256_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN_256_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_256_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+
+/*****************************************************************/
+/* 512-bit Skein */
+/*****************************************************************/
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a straight hashing operation */
+int Skein_512_Init(struct skein_512_ctx *ctx, size_t hashBitLen)
+{
+ union
+ {
+ u8 b[SKEIN_512_STATE_BYTES];
+ u64 w[SKEIN_512_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+
+ switch (hashBitLen)
+ { /* use pre-computed values, where available */
+ case 512:
+ memcpy(ctx->X, SKEIN_512_IV_512, sizeof(ctx->X));
+ break;
+ case 384:
+ memcpy(ctx->X, SKEIN_512_IV_384, sizeof(ctx->X));
+ break;
+ case 256:
+ memcpy(ctx->X, SKEIN_512_IV_256, sizeof(ctx->X));
+ break;
+ case 224:
+ memcpy(ctx->X, SKEIN_512_IV_224, sizeof(ctx->X));
+ break;
+ default:
+ /* here if there is no precomputed IV value available */
+ /* build/process the config block, type == CONFIG (could be precomputed) */
+ Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
+
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
+ memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
+
+ /* compute the initial chaining values from config block */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
+ Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+ break;
+ }
+
+ /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a MAC and/or tree hash operation */
+/* [identical to Skein_512_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
+int Skein_512_InitExt(struct skein_512_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
+{
+ union
+ {
+ u8 b[SKEIN_512_STATE_BYTES];
+ u64 w[SKEIN_512_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
+
+ /* compute the initial chaining values ctx->X[], based on key */
+ if (keyBytes == 0) /* is there a key? */
+ {
+ memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
+ }
+ else /* here to pre-process a key */
+ {
+ Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
+ /* do a mini-Init right here */
+ ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
+ Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
+ Skein_512_Update(ctx, key, keyBytes); /* hash the key */
+ Skein_512_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
+ memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
+ }
+ /* build/process the config block, type == CONFIG (could be precomputed for each key) */
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+ Skein_Start_New_Type(ctx, CFG_FINAL);
+
+ memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
+
+ Skein_Show_Key(512, &ctx->h, key, keyBytes);
+
+ /* compute the initial chaining values from config block */
+ Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+
+ /* The chaining vars ctx->X are now initialized */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG);
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* process the input bytes */
+int Skein_512_Update(struct skein_512_ctx *ctx, const u8 *msg, size_t msgByteCnt)
+{
+ size_t n;
+
+ Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* process full blocks, if any */
+ if (msgByteCnt + ctx->h.bCnt > SKEIN_512_BLOCK_BYTES)
+ {
+ if (ctx->h.bCnt) /* finish up any buffered message data */
+ {
+ n = SKEIN_512_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
+ if (n)
+ {
+ Skein_assert(n < msgByteCnt); /* check on our logic here */
+ memcpy(&ctx->b[ctx->h.bCnt], msg, n);
+ msgByteCnt -= n;
+ msg += n;
+ ctx->h.bCnt += n;
+ }
+ Skein_assert(ctx->h.bCnt == SKEIN_512_BLOCK_BYTES);
+ Skein_512_Process_Block(ctx, ctx->b, 1, SKEIN_512_BLOCK_BYTES);
+ ctx->h.bCnt = 0;
+ }
+ /* now process any remaining full blocks, directly from input message data */
+ if (msgByteCnt > SKEIN_512_BLOCK_BYTES)
+ {
+ n = (msgByteCnt-1) / SKEIN_512_BLOCK_BYTES; /* number of full blocks to process */
+ Skein_512_Process_Block(ctx, msg, n, SKEIN_512_BLOCK_BYTES);
+ msgByteCnt -= n * SKEIN_512_BLOCK_BYTES;
+ msg += n * SKEIN_512_BLOCK_BYTES;
+ }
+ Skein_assert(ctx->h.bCnt == 0);
+ }
+
+ /* copy any remaining source message data bytes into b[] */
+ if (msgByteCnt)
+ {
+ Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES);
+ memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
+ ctx->h.bCnt += msgByteCnt;
+ }
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the result */
+int Skein_512_Final(struct skein_512_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN_512_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_512_BLOCK_BYTES - ctx->h.bCnt);
+
+ Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN_512_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein_512_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN_512_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN_512_BLOCK_BYTES)
+ n = SKEIN_512_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN_512_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(512, &ctx->h, n, hashVal+i*SKEIN_512_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+
+/*****************************************************************/
+/* 1024-bit Skein */
+/*****************************************************************/
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a straight hashing operation */
+int Skein1024_Init(struct skein1024_ctx *ctx, size_t hashBitLen)
+{
+ union
+ {
+ u8 b[SKEIN1024_STATE_BYTES];
+ u64 w[SKEIN1024_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+
+ switch (hashBitLen)
+ { /* use pre-computed values, where available */
+ case 512:
+ memcpy(ctx->X, SKEIN1024_IV_512, sizeof(ctx->X));
+ break;
+ case 384:
+ memcpy(ctx->X, SKEIN1024_IV_384, sizeof(ctx->X));
+ break;
+ case 1024:
+ memcpy(ctx->X, SKEIN1024_IV_1024, sizeof(ctx->X));
+ break;
+ default:
+ /* here if there is no precomputed IV value available */
+ /* build/process the config block, type == CONFIG (could be precomputed) */
+ Skein_Start_New_Type(ctx, CFG_FINAL); /* set tweaks: T0=0; T1=CFG | FINAL */
+
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); /* set the schema, version */
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL);
+ memset(&cfg.w[3], 0, sizeof(cfg) - 3*sizeof(cfg.w[0])); /* zero pad config block */
+
+ /* compute the initial chaining values from config block */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the chaining variables */
+ Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+ break;
+ }
+
+ /* The chaining vars ctx->X are now initialized for the given hashBitLen. */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* init the context for a MAC and/or tree hash operation */
+/* [identical to Skein1024_Init() when keyBytes == 0 && treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] */
+int Skein1024_InitExt(struct skein1024_ctx *ctx, size_t hashBitLen, u64 treeInfo, const u8 *key, size_t keyBytes)
+{
+ union
+ {
+ u8 b[SKEIN1024_STATE_BYTES];
+ u64 w[SKEIN1024_STATE_WORDS];
+ } cfg; /* config block */
+
+ Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN);
+ Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL);
+
+ /* compute the initial chaining values ctx->X[], based on key */
+ if (keyBytes == 0) /* is there a key? */
+ {
+ memset(ctx->X, 0, sizeof(ctx->X)); /* no key: use all zeroes as key for config block */
+ }
+ else /* here to pre-process a key */
+ {
+ Skein_assert(sizeof(cfg.b) >= sizeof(ctx->X));
+ /* do a mini-Init right here */
+ ctx->h.hashBitLen = 8*sizeof(ctx->X); /* set output hash bit count = state size */
+ Skein_Start_New_Type(ctx, KEY); /* set tweaks: T0 = 0; T1 = KEY type */
+ memset(ctx->X, 0, sizeof(ctx->X)); /* zero the initial chaining variables */
+ Skein1024_Update(ctx, key, keyBytes); /* hash the key */
+ Skein1024_Final_Pad(ctx, cfg.b); /* put result into cfg.b[] */
+ memcpy(ctx->X, cfg.b, sizeof(cfg.b)); /* copy over into ctx->X[] */
+ }
+ /* build/process the config block, type == CONFIG (could be precomputed for each key) */
+ ctx->h.hashBitLen = hashBitLen; /* output hash bit count */
+ Skein_Start_New_Type(ctx, CFG_FINAL);
+
+ memset(&cfg.w, 0, sizeof(cfg.w)); /* pre-pad cfg.w[] with zeroes */
+ cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER);
+ cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */
+ cfg.w[2] = Skein_Swap64(treeInfo); /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */
+
+ Skein_Show_Key(1024, &ctx->h, key, keyBytes);
+
+ /* compute the initial chaining values from config block */
+ Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN);
+
+ /* The chaining vars ctx->X are now initialized */
+ /* Set up to process the data message portion of the hash (default) */
+ Skein_Start_New_Type(ctx, MSG);
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* process the input bytes */
+int Skein1024_Update(struct skein1024_ctx *ctx, const u8 *msg, size_t msgByteCnt)
+{
+ size_t n;
+
+ Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* process full blocks, if any */
+ if (msgByteCnt + ctx->h.bCnt > SKEIN1024_BLOCK_BYTES)
+ {
+ if (ctx->h.bCnt) /* finish up any buffered message data */
+ {
+ n = SKEIN1024_BLOCK_BYTES - ctx->h.bCnt; /* # bytes free in buffer b[] */
+ if (n)
+ {
+ Skein_assert(n < msgByteCnt); /* check on our logic here */
+ memcpy(&ctx->b[ctx->h.bCnt], msg, n);
+ msgByteCnt -= n;
+ msg += n;
+ ctx->h.bCnt += n;
+ }
+ Skein_assert(ctx->h.bCnt == SKEIN1024_BLOCK_BYTES);
+ Skein1024_Process_Block(ctx, ctx->b, 1, SKEIN1024_BLOCK_BYTES);
+ ctx->h.bCnt = 0;
+ }
+ /* now process any remaining full blocks, directly from input message data */
+ if (msgByteCnt > SKEIN1024_BLOCK_BYTES)
+ {
+ n = (msgByteCnt-1) / SKEIN1024_BLOCK_BYTES; /* number of full blocks to process */
+ Skein1024_Process_Block(ctx, msg, n, SKEIN1024_BLOCK_BYTES);
+ msgByteCnt -= n * SKEIN1024_BLOCK_BYTES;
+ msg += n * SKEIN1024_BLOCK_BYTES;
+ }
+ Skein_assert(ctx->h.bCnt == 0);
+ }
+
+ /* copy any remaining source message data bytes into b[] */
+ if (msgByteCnt)
+ {
+ Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES);
+ memcpy(&ctx->b[ctx->h.bCnt], msg, msgByteCnt);
+ ctx->h.bCnt += msgByteCnt;
+ }
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the result */
+int Skein1024_Final(struct skein1024_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN1024_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN1024_BLOCK_BYTES - ctx->h.bCnt);
+
+ Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN1024_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein1024_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN1024_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN1024_BLOCK_BYTES)
+ n = SKEIN1024_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN1024_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(1024, &ctx->h, n, hashVal+i*SKEIN1024_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+
+/**************** Functions to support MAC/tree hashing ***************/
+/* (this code is identical for Optimized and Reference versions) */
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the block, no OUTPUT stage */
+int Skein_256_Final_Pad(struct skein_256_ctx *ctx, u8 *hashVal)
+{
+ Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_256_BLOCK_BYTES - ctx->h.bCnt);
+ Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_256_BLOCK_BYTES); /* "output" the state bytes */
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the block, no OUTPUT stage */
+int Skein_512_Final_Pad(struct skein_512_ctx *ctx, u8 *hashVal)
+{
+ Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN_512_BLOCK_BYTES - ctx->h.bCnt);
+ Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_512_BLOCK_BYTES); /* "output" the state bytes */
+
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* finalize the hash computation and output the block, no OUTPUT stage */
+int Skein1024_Final_Pad(struct skein1024_ctx *ctx, u8 *hashVal)
+{
+ Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */
+ if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) /* zero pad b[] if necessary */
+ memset(&ctx->b[ctx->h.bCnt], 0, SKEIN1024_BLOCK_BYTES - ctx->h.bCnt);
+ Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); /* process the final block */
+
+ Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN1024_BLOCK_BYTES); /* "output" the state bytes */
+
+ return SKEIN_SUCCESS;
+}
+
+#if SKEIN_TREE_HASH
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* just do the OUTPUT stage */
+int Skein_256_Output(struct skein_256_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN_256_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN_256_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein_256_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN_256_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN_256_BLOCK_BYTES)
+ n = SKEIN_256_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN_256_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_256_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* just do the OUTPUT stage */
+int Skein_512_Output(struct skein_512_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN_512_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN_512_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein_512_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN_512_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN_512_BLOCK_BYTES)
+ n = SKEIN_512_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN_512_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN_512_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+
+/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+/* just do the OUTPUT stage */
+int Skein1024_Output(struct skein1024_ctx *ctx, u8 *hashVal)
+{
+ size_t i, n, byteCnt;
+ u64 X[SKEIN1024_STATE_WORDS];
+ Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); /* catch uninitialized context */
+
+ /* now output the result */
+ byteCnt = (ctx->h.hashBitLen + 7) >> 3; /* total number of output bytes */
+
+ /* run Threefish in "counter mode" to generate output */
+ memset(ctx->b, 0, sizeof(ctx->b)); /* zero out b[], so it can hold the counter */
+ memcpy(X, ctx->X, sizeof(X)); /* keep a local copy of counter mode "key" */
+ for (i = 0; i*SKEIN1024_BLOCK_BYTES < byteCnt; i++)
+ {
+ ((u64 *)ctx->b)[0] = Skein_Swap64((u64) i); /* build the counter block */
+ Skein_Start_New_Type(ctx, OUT_FINAL);
+ Skein1024_Process_Block(ctx, ctx->b, 1, sizeof(u64)); /* run "counter mode" */
+ n = byteCnt - i*SKEIN1024_BLOCK_BYTES; /* number of output bytes left to go */
+ if (n >= SKEIN1024_BLOCK_BYTES)
+ n = SKEIN1024_BLOCK_BYTES;
+ Skein_Put64_LSB_First(hashVal+i*SKEIN1024_BLOCK_BYTES, ctx->X, n); /* "output" the ctr mode bytes */
+ Skein_Show_Final(256, &ctx->h, n, hashVal+i*SKEIN1024_BLOCK_BYTES);
+ memcpy(ctx->X, X, sizeof(X)); /* restore the counter mode key for next time */
+ }
+ return SKEIN_SUCCESS;
+}
+#endif
diff --git a/drivers/staging/skein/skeinApi.c b/drivers/staging/skein/skeinApi.c
old mode 100755
new mode 100644
diff --git a/drivers/staging/skein/skeinBlockNo3F.c b/drivers/staging/skein/skeinBlockNo3F.c
index a4b1ec56ad83..d98933eeb0bf 100644
--- a/drivers/staging/skein/skeinBlockNo3F.c
+++ b/drivers/staging/skein/skeinBlockNo3F.c
@@ -1,172 +1,172 @@
-
-#include <linux/string.h>
-#include <skein.h>
-#include <threefishApi.h>
-
-
-/***************************** Skein_256 ******************************/
-void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr,
- size_t blkCnt, size_t byteCntAdd)
-{
- struct threefish_key key;
- u64 tweak[2];
- int i;
- u64 w[SKEIN_256_STATE_WORDS]; /* local copy of input block */
- u64 words[3];
-
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- tweak[0] = ctx->h.T[0];
- tweak[1] = ctx->h.T[1];
-
- do {
- u64 carry = byteCntAdd;
-
- words[0] = tweak[0] & 0xffffffffL;
- words[1] = ((tweak[0] >> 32) & 0xffffffffL);
- words[2] = (tweak[1] & 0xffffffffL);
-
- for (i = 0; i < 3; i++) {
- carry += words[i];
- words[i] = carry;
- carry >>= 32;
- }
- tweak[0] = words[0] & 0xffffffffL;
- tweak[0] |= (words[1] & 0xffffffffL) << 32;
- tweak[1] |= words[2] & 0xffffffffL;
-
- threefishSetKey(&key, Threefish256, ctx->X, tweak);
-
- Skein_Get64_LSB_First(w, blkPtr, SKEIN_256_STATE_WORDS); /* get input block in little-endian format */
-
- threefishEncryptBlockWords(&key, w, ctx->X);
-
- blkPtr += SKEIN_256_BLOCK_BYTES;
-
- /* do the final "feedforward" xor, update context chaining vars */
- ctx->X[0] = ctx->X[0] ^ w[0];
- ctx->X[1] = ctx->X[1] ^ w[1];
- ctx->X[2] = ctx->X[2] ^ w[2];
- ctx->X[3] = ctx->X[3] ^ w[3];
-
- tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
- } while (--blkCnt);
-
- ctx->h.T[0] = tweak[0];
- ctx->h.T[1] = tweak[1];
-}
-
-void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr,
- size_t blkCnt, size_t byteCntAdd)
-{
- struct threefish_key key;
- u64 tweak[2];
- int i;
- u64 words[3];
- u64 w[SKEIN_512_STATE_WORDS]; /* local copy of input block */
-
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- tweak[0] = ctx->h.T[0];
- tweak[1] = ctx->h.T[1];
-
- do {
- u64 carry = byteCntAdd;
-
- words[0] = tweak[0] & 0xffffffffL;
- words[1] = ((tweak[0] >> 32) & 0xffffffffL);
- words[2] = (tweak[1] & 0xffffffffL);
-
- for (i = 0; i < 3; i++) {
- carry += words[i];
- words[i] = carry;
- carry >>= 32;
- }
- tweak[0] = words[0] & 0xffffffffL;
- tweak[0] |= (words[1] & 0xffffffffL) << 32;
- tweak[1] |= words[2] & 0xffffffffL;
-
- threefishSetKey(&key, Threefish512, ctx->X, tweak);
-
- Skein_Get64_LSB_First(w, blkPtr, SKEIN_512_STATE_WORDS); /* get input block in little-endian format */
-
- threefishEncryptBlockWords(&key, w, ctx->X);
-
- blkPtr += SKEIN_512_BLOCK_BYTES;
-
- /* do the final "feedforward" xor, update context chaining vars */
- ctx->X[0] = ctx->X[0] ^ w[0];
- ctx->X[1] = ctx->X[1] ^ w[1];
- ctx->X[2] = ctx->X[2] ^ w[2];
- ctx->X[3] = ctx->X[3] ^ w[3];
- ctx->X[4] = ctx->X[4] ^ w[4];
- ctx->X[5] = ctx->X[5] ^ w[5];
- ctx->X[6] = ctx->X[6] ^ w[6];
- ctx->X[7] = ctx->X[7] ^ w[7];
-
- tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
- } while (--blkCnt);
-
- ctx->h.T[0] = tweak[0];
- ctx->h.T[1] = tweak[1];
-}
-
-void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr,
- size_t blkCnt, size_t byteCntAdd)
-{
- struct threefish_key key;
- u64 tweak[2];
- int i;
- u64 words[3];
- u64 w[SKEIN1024_STATE_WORDS]; /* local copy of input block */
-
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- tweak[0] = ctx->h.T[0];
- tweak[1] = ctx->h.T[1];
-
- do {
- u64 carry = byteCntAdd;
-
- words[0] = tweak[0] & 0xffffffffL;
- words[1] = ((tweak[0] >> 32) & 0xffffffffL);
- words[2] = (tweak[1] & 0xffffffffL);
-
- for (i = 0; i < 3; i++) {
- carry += words[i];
- words[i] = carry;
- carry >>= 32;
- }
- tweak[0] = words[0] & 0xffffffffL;
- tweak[0] |= (words[1] & 0xffffffffL) << 32;
- tweak[1] |= words[2] & 0xffffffffL;
-
- threefishSetKey(&key, Threefish1024, ctx->X, tweak);
-
- Skein_Get64_LSB_First(w, blkPtr, SKEIN1024_STATE_WORDS); /* get input block in little-endian format */
-
- threefishEncryptBlockWords(&key, w, ctx->X);
-
- blkPtr += SKEIN1024_BLOCK_BYTES;
-
- /* do the final "feedforward" xor, update context chaining vars */
- ctx->X[0] = ctx->X[0] ^ w[0];
- ctx->X[1] = ctx->X[1] ^ w[1];
- ctx->X[2] = ctx->X[2] ^ w[2];
- ctx->X[3] = ctx->X[3] ^ w[3];
- ctx->X[4] = ctx->X[4] ^ w[4];
- ctx->X[5] = ctx->X[5] ^ w[5];
- ctx->X[6] = ctx->X[6] ^ w[6];
- ctx->X[7] = ctx->X[7] ^ w[7];
- ctx->X[8] = ctx->X[8] ^ w[8];
- ctx->X[9] = ctx->X[9] ^ w[9];
- ctx->X[10] = ctx->X[10] ^ w[10];
- ctx->X[11] = ctx->X[11] ^ w[11];
- ctx->X[12] = ctx->X[12] ^ w[12];
- ctx->X[13] = ctx->X[13] ^ w[13];
- ctx->X[14] = ctx->X[14] ^ w[14];
- ctx->X[15] = ctx->X[15] ^ w[15];
-
- tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
- } while (--blkCnt);
-
- ctx->h.T[0] = tweak[0];
- ctx->h.T[1] = tweak[1];
-}
+
+#include <linux/string.h>
+#include <skein.h>
+#include <threefishApi.h>
+
+
+/***************************** Skein_256 ******************************/
+void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr,
+ size_t blkCnt, size_t byteCntAdd)
+{
+ struct threefish_key key;
+ u64 tweak[2];
+ int i;
+ u64 w[SKEIN_256_STATE_WORDS]; /* local copy of input block */
+ u64 words[3];
+
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ tweak[0] = ctx->h.T[0];
+ tweak[1] = ctx->h.T[1];
+
+ do {
+ u64 carry = byteCntAdd;
+
+ words[0] = tweak[0] & 0xffffffffL;
+ words[1] = ((tweak[0] >> 32) & 0xffffffffL);
+ words[2] = (tweak[1] & 0xffffffffL);
+
+ for (i = 0; i < 3; i++) {
+ carry += words[i];
+ words[i] = carry;
+ carry >>= 32;
+ }
+ tweak[0] = words[0] & 0xffffffffL;
+ tweak[0] |= (words[1] & 0xffffffffL) << 32;
+ tweak[1] |= words[2] & 0xffffffffL;
+
+ threefishSetKey(&key, Threefish256, ctx->X, tweak);
+
+ Skein_Get64_LSB_First(w, blkPtr, SKEIN_256_STATE_WORDS); /* get input block in little-endian format */
+
+ threefishEncryptBlockWords(&key, w, ctx->X);
+
+ blkPtr += SKEIN_256_BLOCK_BYTES;
+
+ /* do the final "feedforward" xor, update context chaining vars */
+ ctx->X[0] = ctx->X[0] ^ w[0];
+ ctx->X[1] = ctx->X[1] ^ w[1];
+ ctx->X[2] = ctx->X[2] ^ w[2];
+ ctx->X[3] = ctx->X[3] ^ w[3];
+
+ tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
+ } while (--blkCnt);
+
+ ctx->h.T[0] = tweak[0];
+ ctx->h.T[1] = tweak[1];
+}
+
+void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr,
+ size_t blkCnt, size_t byteCntAdd)
+{
+ struct threefish_key key;
+ u64 tweak[2];
+ int i;
+ u64 words[3];
+ u64 w[SKEIN_512_STATE_WORDS]; /* local copy of input block */
+
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ tweak[0] = ctx->h.T[0];
+ tweak[1] = ctx->h.T[1];
+
+ do {
+ u64 carry = byteCntAdd;
+
+ words[0] = tweak[0] & 0xffffffffL;
+ words[1] = ((tweak[0] >> 32) & 0xffffffffL);
+ words[2] = (tweak[1] & 0xffffffffL);
+
+ for (i = 0; i < 3; i++) {
+ carry += words[i];
+ words[i] = carry;
+ carry >>= 32;
+ }
+ tweak[0] = words[0] & 0xffffffffL;
+ tweak[0] |= (words[1] & 0xffffffffL) << 32;
+ tweak[1] |= words[2] & 0xffffffffL;
+
+ threefishSetKey(&key, Threefish512, ctx->X, tweak);
+
+ Skein_Get64_LSB_First(w, blkPtr, SKEIN_512_STATE_WORDS); /* get input block in little-endian format */
+
+ threefishEncryptBlockWords(&key, w, ctx->X);
+
+ blkPtr += SKEIN_512_BLOCK_BYTES;
+
+ /* do the final "feedforward" xor, update context chaining vars */
+ ctx->X[0] = ctx->X[0] ^ w[0];
+ ctx->X[1] = ctx->X[1] ^ w[1];
+ ctx->X[2] = ctx->X[2] ^ w[2];
+ ctx->X[3] = ctx->X[3] ^ w[3];
+ ctx->X[4] = ctx->X[4] ^ w[4];
+ ctx->X[5] = ctx->X[5] ^ w[5];
+ ctx->X[6] = ctx->X[6] ^ w[6];
+ ctx->X[7] = ctx->X[7] ^ w[7];
+
+ tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
+ } while (--blkCnt);
+
+ ctx->h.T[0] = tweak[0];
+ ctx->h.T[1] = tweak[1];
+}
+
+void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr,
+ size_t blkCnt, size_t byteCntAdd)
+{
+ struct threefish_key key;
+ u64 tweak[2];
+ int i;
+ u64 words[3];
+ u64 w[SKEIN1024_STATE_WORDS]; /* local copy of input block */
+
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ tweak[0] = ctx->h.T[0];
+ tweak[1] = ctx->h.T[1];
+
+ do {
+ u64 carry = byteCntAdd;
+
+ words[0] = tweak[0] & 0xffffffffL;
+ words[1] = ((tweak[0] >> 32) & 0xffffffffL);
+ words[2] = (tweak[1] & 0xffffffffL);
+
+ for (i = 0; i < 3; i++) {
+ carry += words[i];
+ words[i] = carry;
+ carry >>= 32;
+ }
+ tweak[0] = words[0] & 0xffffffffL;
+ tweak[0] |= (words[1] & 0xffffffffL) << 32;
+ tweak[1] |= words[2] & 0xffffffffL;
+
+ threefishSetKey(&key, Threefish1024, ctx->X, tweak);
+
+ Skein_Get64_LSB_First(w, blkPtr, SKEIN1024_STATE_WORDS); /* get input block in little-endian format */
+
+ threefishEncryptBlockWords(&key, w, ctx->X);
+
+ blkPtr += SKEIN1024_BLOCK_BYTES;
+
+ /* do the final "feedforward" xor, update context chaining vars */
+ ctx->X[0] = ctx->X[0] ^ w[0];
+ ctx->X[1] = ctx->X[1] ^ w[1];
+ ctx->X[2] = ctx->X[2] ^ w[2];
+ ctx->X[3] = ctx->X[3] ^ w[3];
+ ctx->X[4] = ctx->X[4] ^ w[4];
+ ctx->X[5] = ctx->X[5] ^ w[5];
+ ctx->X[6] = ctx->X[6] ^ w[6];
+ ctx->X[7] = ctx->X[7] ^ w[7];
+ ctx->X[8] = ctx->X[8] ^ w[8];
+ ctx->X[9] = ctx->X[9] ^ w[9];
+ ctx->X[10] = ctx->X[10] ^ w[10];
+ ctx->X[11] = ctx->X[11] ^ w[11];
+ ctx->X[12] = ctx->X[12] ^ w[12];
+ ctx->X[13] = ctx->X[13] ^ w[13];
+ ctx->X[14] = ctx->X[14] ^ w[14];
+ ctx->X[15] = ctx->X[15] ^ w[15];
+
+ tweak[1] &= ~SKEIN_T1_FLAG_FIRST;
+ } while (--blkCnt);
+
+ ctx->h.T[0] = tweak[0];
+ ctx->h.T[1] = tweak[1];
+}
diff --git a/drivers/staging/skein/skein_block.c b/drivers/staging/skein/skein_block.c
index 791bacdd3d57..e62b6442783e 100644
--- a/drivers/staging/skein/skein_block.c
+++ b/drivers/staging/skein/skein_block.c
@@ -1,686 +1,686 @@
-/***********************************************************************
-**
-** Implementation of the Skein block functions.
-**
-** Source code author: Doug Whiting, 2008.
-**
-** This algorithm and source code is released to the public domain.
-**
-** Compile-time switches:
-**
-** SKEIN_USE_ASM -- set bits (256/512/1024) to select which
-** versions use ASM code for block processing
-** [default: use C for all block sizes]
-**
-************************************************************************/
-
-#include <linux/string.h>
-#include <skein.h>
-
-#ifndef SKEIN_USE_ASM
-#define SKEIN_USE_ASM (0) /* default is all C code (no ASM) */
-#endif
-
-#ifndef SKEIN_LOOP
-#define SKEIN_LOOP 001 /* default: unroll 256 and 512, but not 1024 */
-#endif
-
-#define BLK_BITS (WCNT*64) /* some useful definitions for code here */
-#define KW_TWK_BASE (0)
-#define KW_KEY_BASE (3)
-#define ks (kw + KW_KEY_BASE)
-#define ts (kw + KW_TWK_BASE)
-
-#ifdef SKEIN_DEBUG
-#define DebugSaveTweak(ctx) { ctx->h.T[0] = ts[0]; ctx->h.T[1] = ts[1]; }
-#else
-#define DebugSaveTweak(ctx)
-#endif
-
-/***************************** Skein_256 ******************************/
-#if !(SKEIN_USE_ASM & 256)
-void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
- { /* do it in C */
- enum {
- WCNT = SKEIN_256_STATE_WORDS
- };
-#undef RCNT
-#define RCNT (SKEIN_256_ROUNDS_TOTAL/8)
-
-#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
-#define SKEIN_UNROLL_256 (((SKEIN_LOOP)/100)%10)
-#else
-#define SKEIN_UNROLL_256 (0)
-#endif
-
-#if SKEIN_UNROLL_256
-#if (RCNT % SKEIN_UNROLL_256)
-#error "Invalid SKEIN_UNROLL_256" /* sanity check on unroll count */
-#endif
- size_t r;
- u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
-#else
- u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
-#endif
- u64 X0, X1, X2, X3; /* local copy of context vars, for speed */
- u64 w[WCNT]; /* local copy of input block */
-#ifdef SKEIN_DEBUG
- const u64 *Xptr[4]; /* use for debugging (help compiler put Xn in registers) */
- Xptr[0] = &X0; Xptr[1] = &X1; Xptr[2] = &X2; Xptr[3] = &X3;
-#endif
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- ts[0] = ctx->h.T[0];
- ts[1] = ctx->h.T[1];
- do {
- /* this implementation only supports 2**64 input bytes (no carry out here) */
- ts[0] += byteCntAdd; /* update processed length */
-
- /* precompute the key schedule for this block */
- ks[0] = ctx->X[0];
- ks[1] = ctx->X[1];
- ks[2] = ctx->X[2];
- ks[3] = ctx->X[3];
- ks[4] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^ SKEIN_KS_PARITY;
-
- ts[2] = ts[0] ^ ts[1];
-
- Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
- DebugSaveTweak(ctx);
- Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
-
- X0 = w[0] + ks[0]; /* do the first full key injection */
- X1 = w[1] + ks[1] + ts[0];
- X2 = w[2] + ks[2] + ts[1];
- X3 = w[3] + ks[3];
-
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr); /* show starting state values */
-
- blkPtr += SKEIN_256_BLOCK_BYTES;
-
- /* run the rounds */
-
-#define Round256(p0, p1, p2, p3, ROT, rNum) \
- X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
- X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
-
-#if SKEIN_UNROLL_256 == 0
-#define R256(p0, p1, p2, p3, ROT, rNum) /* fully unrolled */ \
- Round256(p0, p1, p2, p3, ROT, rNum) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rNum, Xptr);
-
-#define I256(R) \
- X0 += ks[((R)+1) % 5]; /* inject the key schedule value */ \
- X1 += ks[((R)+2) % 5] + ts[((R)+1) % 3]; \
- X2 += ks[((R)+3) % 5] + ts[((R)+2) % 3]; \
- X3 += ks[((R)+4) % 5] + (R)+1; \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-#else /* looping version */
-#define R256(p0, p1, p2, p3, ROT, rNum) \
- Round256(p0, p1, p2, p3, ROT, rNum) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rNum, Xptr);
-
-#define I256(R) \
- X0 += ks[r+(R)+0]; /* inject the key schedule value */ \
- X1 += ks[r+(R)+1] + ts[r+(R)+0]; \
- X2 += ks[r+(R)+2] + ts[r+(R)+1]; \
- X3 += ks[r+(R)+3] + r+(R); \
- ks[r + (R) + 4] = ks[r + (R) - 1]; /* rotate key schedule */\
- ts[r + (R) + 2] = ts[r + (R) - 1]; \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-
- for (r = 1; r < 2 * RCNT; r += 2 * SKEIN_UNROLL_256) /* loop thru it */
-#endif
- {
-#define R256_8_rounds(R) \
- R256(0, 1, 2, 3, R_256_0, 8 * (R) + 1); \
- R256(0, 3, 2, 1, R_256_1, 8 * (R) + 2); \
- R256(0, 1, 2, 3, R_256_2, 8 * (R) + 3); \
- R256(0, 3, 2, 1, R_256_3, 8 * (R) + 4); \
- I256(2 * (R)); \
- R256(0, 1, 2, 3, R_256_4, 8 * (R) + 5); \
- R256(0, 3, 2, 1, R_256_5, 8 * (R) + 6); \
- R256(0, 1, 2, 3, R_256_6, 8 * (R) + 7); \
- R256(0, 3, 2, 1, R_256_7, 8 * (R) + 8); \
- I256(2 * (R) + 1);
-
- R256_8_rounds(0);
-
-#define R256_Unroll_R(NN) ((SKEIN_UNROLL_256 == 0 && SKEIN_256_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_256 > (NN)))
-
- #if R256_Unroll_R(1)
- R256_8_rounds(1);
- #endif
- #if R256_Unroll_R(2)
- R256_8_rounds(2);
- #endif
- #if R256_Unroll_R(3)
- R256_8_rounds(3);
- #endif
- #if R256_Unroll_R(4)
- R256_8_rounds(4);
- #endif
- #if R256_Unroll_R(5)
- R256_8_rounds(5);
- #endif
- #if R256_Unroll_R(6)
- R256_8_rounds(6);
- #endif
- #if R256_Unroll_R(7)
- R256_8_rounds(7);
- #endif
- #if R256_Unroll_R(8)
- R256_8_rounds(8);
- #endif
- #if R256_Unroll_R(9)
- R256_8_rounds(9);
- #endif
- #if R256_Unroll_R(10)
- R256_8_rounds(10);
- #endif
- #if R256_Unroll_R(11)
- R256_8_rounds(11);
- #endif
- #if R256_Unroll_R(12)
- R256_8_rounds(12);
- #endif
- #if R256_Unroll_R(13)
- R256_8_rounds(13);
- #endif
- #if R256_Unroll_R(14)
- R256_8_rounds(14);
- #endif
- #if (SKEIN_UNROLL_256 > 14)
-#error "need more unrolling in Skein_256_Process_Block"
- #endif
- }
- /* do the final "feedforward" xor, update context chaining vars */
- ctx->X[0] = X0 ^ w[0];
- ctx->X[1] = X1 ^ w[1];
- ctx->X[2] = X2 ^ w[2];
- ctx->X[3] = X3 ^ w[3];
-
- Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
-
- ts[1] &= ~SKEIN_T1_FLAG_FIRST;
- }
- while (--blkCnt);
- ctx->h.T[0] = ts[0];
- ctx->h.T[1] = ts[1];
- }
-
-#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
-size_t Skein_256_Process_Block_CodeSize(void)
- {
- return ((u8 *) Skein_256_Process_Block_CodeSize) -
- ((u8 *) Skein_256_Process_Block);
- }
-unsigned int Skein_256_Unroll_Cnt(void)
- {
- return SKEIN_UNROLL_256;
- }
-#endif
-#endif
-
-/***************************** Skein_512 ******************************/
-#if !(SKEIN_USE_ASM & 512)
-void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
- { /* do it in C */
- enum {
- WCNT = SKEIN_512_STATE_WORDS
- };
-#undef RCNT
-#define RCNT (SKEIN_512_ROUNDS_TOTAL/8)
-
-#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
-#define SKEIN_UNROLL_512 (((SKEIN_LOOP)/10)%10)
-#else
-#define SKEIN_UNROLL_512 (0)
-#endif
-
-#if SKEIN_UNROLL_512
-#if (RCNT % SKEIN_UNROLL_512)
-#error "Invalid SKEIN_UNROLL_512" /* sanity check on unroll count */
-#endif
- size_t r;
- u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
-#else
- u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
-#endif
- u64 X0, X1, X2, X3, X4, X5, X6, X7; /* local copy of vars, for speed */
- u64 w[WCNT]; /* local copy of input block */
-#ifdef SKEIN_DEBUG
- const u64 *Xptr[8]; /* use for debugging (help compiler put Xn in registers) */
- Xptr[0] = &X0; Xptr[1] = &X1; Xptr[2] = &X2; Xptr[3] = &X3;
- Xptr[4] = &X4; Xptr[5] = &X5; Xptr[6] = &X6; Xptr[7] = &X7;
-#endif
-
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- ts[0] = ctx->h.T[0];
- ts[1] = ctx->h.T[1];
- do {
- /* this implementation only supports 2**64 input bytes (no carry out here) */
- ts[0] += byteCntAdd; /* update processed length */
-
- /* precompute the key schedule for this block */
- ks[0] = ctx->X[0];
- ks[1] = ctx->X[1];
- ks[2] = ctx->X[2];
- ks[3] = ctx->X[3];
- ks[4] = ctx->X[4];
- ks[5] = ctx->X[5];
- ks[6] = ctx->X[6];
- ks[7] = ctx->X[7];
- ks[8] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^
- ks[4] ^ ks[5] ^ ks[6] ^ ks[7] ^ SKEIN_KS_PARITY;
-
- ts[2] = ts[0] ^ ts[1];
-
- Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
- DebugSaveTweak(ctx);
- Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
-
- X0 = w[0] + ks[0]; /* do the first full key injection */
- X1 = w[1] + ks[1];
- X2 = w[2] + ks[2];
- X3 = w[3] + ks[3];
- X4 = w[4] + ks[4];
- X5 = w[5] + ks[5] + ts[0];
- X6 = w[6] + ks[6] + ts[1];
- X7 = w[7] + ks[7];
-
- blkPtr += SKEIN_512_BLOCK_BYTES;
-
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr);
- /* run the rounds */
-#define Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
- X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
- X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
- X##p4 += X##p5; X##p5 = RotL_64(X##p5, ROT##_2); X##p5 ^= X##p4; \
- X##p6 += X##p7; X##p7 = RotL_64(X##p7, ROT##_3); X##p7 ^= X##p6; \
-
-#if SKEIN_UNROLL_512 == 0
-#define R512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) /* unrolled */ \
- Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rNum, Xptr);
-
-#define I512(R) \
- X0 += ks[((R) + 1) % 9]; /* inject the key schedule value */ \
- X1 += ks[((R) + 2) % 9]; \
- X2 += ks[((R) + 3) % 9]; \
- X3 += ks[((R) + 4) % 9]; \
- X4 += ks[((R) + 5) % 9]; \
- X5 += ks[((R) + 6) % 9] + ts[((R) + 1) % 3]; \
- X6 += ks[((R) + 7) % 9] + ts[((R) + 2) % 3]; \
- X7 += ks[((R) + 8) % 9] + (R) + 1; \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-#else /* looping version */
-#define R512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
- Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rNum, Xptr);
-
-#define I512(R) \
- X0 += ks[r + (R) + 0]; /* inject the key schedule value */ \
- X1 += ks[r + (R) + 1]; \
- X2 += ks[r + (R) + 2]; \
- X3 += ks[r + (R) + 3]; \
- X4 += ks[r + (R) + 4]; \
- X5 += ks[r + (R) + 5] + ts[r + (R) + 0]; \
- X6 += ks[r + (R) + 6] + ts[r + (R) + 1]; \
- X7 += ks[r + (R) + 7] + r + (R); \
- ks[r + (R) + 8] = ks[r + (R) - 1]; /* rotate key schedule */ \
- ts[r + (R) + 2] = ts[r + (R) - 1]; \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-
- for (r = 1; r < 2 * RCNT; r += 2 * SKEIN_UNROLL_512) /* loop thru it */
-#endif /* end of looped code definitions */
- {
-#define R512_8_rounds(R) /* do 8 full rounds */ \
- R512(0, 1, 2, 3, 4, 5, 6, 7, R_512_0, 8 * (R) + 1); \
- R512(2, 1, 4, 7, 6, 5, 0, 3, R_512_1, 8 * (R) + 2); \
- R512(4, 1, 6, 3, 0, 5, 2, 7, R_512_2, 8 * (R) + 3); \
- R512(6, 1, 0, 7, 2, 5, 4, 3, R_512_3, 8 * (R) + 4); \
- I512(2 * (R)); \
- R512(0, 1, 2, 3, 4, 5, 6, 7, R_512_4, 8 * (R) + 5); \
- R512(2, 1, 4, 7, 6, 5, 0, 3, R_512_5, 8 * (R) + 6); \
- R512(4, 1, 6, 3, 0, 5, 2, 7, R_512_6, 8 * (R) + 7); \
- R512(6, 1, 0, 7, 2, 5, 4, 3, R_512_7, 8 * (R) + 8); \
- I512(2 * (R) + 1); /* and key injection */
-
- R512_8_rounds(0);
-
-#define R512_Unroll_R(NN) ((SKEIN_UNROLL_512 == 0 && SKEIN_512_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_512 > (NN)))
-
- #if R512_Unroll_R(1)
- R512_8_rounds(1);
- #endif
- #if R512_Unroll_R(2)
- R512_8_rounds(2);
- #endif
- #if R512_Unroll_R(3)
- R512_8_rounds(3);
- #endif
- #if R512_Unroll_R(4)
- R512_8_rounds(4);
- #endif
- #if R512_Unroll_R(5)
- R512_8_rounds(5);
- #endif
- #if R512_Unroll_R(6)
- R512_8_rounds(6);
- #endif
- #if R512_Unroll_R(7)
- R512_8_rounds(7);
- #endif
- #if R512_Unroll_R(8)
- R512_8_rounds(8);
- #endif
- #if R512_Unroll_R(9)
- R512_8_rounds(9);
- #endif
- #if R512_Unroll_R(10)
- R512_8_rounds(10);
- #endif
- #if R512_Unroll_R(11)
- R512_8_rounds(11);
- #endif
- #if R512_Unroll_R(12)
- R512_8_rounds(12);
- #endif
- #if R512_Unroll_R(13)
- R512_8_rounds(13);
- #endif
- #if R512_Unroll_R(14)
- R512_8_rounds(14);
- #endif
- #if (SKEIN_UNROLL_512 > 14)
-#error "need more unrolling in Skein_512_Process_Block"
- #endif
- }
-
- /* do the final "feedforward" xor, update context chaining vars */
- ctx->X[0] = X0 ^ w[0];
- ctx->X[1] = X1 ^ w[1];
- ctx->X[2] = X2 ^ w[2];
- ctx->X[3] = X3 ^ w[3];
- ctx->X[4] = X4 ^ w[4];
- ctx->X[5] = X5 ^ w[5];
- ctx->X[6] = X6 ^ w[6];
- ctx->X[7] = X7 ^ w[7];
- Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
-
- ts[1] &= ~SKEIN_T1_FLAG_FIRST;
- }
- while (--blkCnt);
- ctx->h.T[0] = ts[0];
- ctx->h.T[1] = ts[1];
- }
-
-#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
-size_t Skein_512_Process_Block_CodeSize(void)
- {
- return ((u8 *) Skein_512_Process_Block_CodeSize) -
- ((u8 *) Skein_512_Process_Block);
- }
-unsigned int Skein_512_Unroll_Cnt(void)
- {
- return SKEIN_UNROLL_512;
- }
-#endif
-#endif
-
-/***************************** Skein1024 ******************************/
-#if !(SKEIN_USE_ASM & 1024)
-void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
- { /* do it in C, always looping (unrolled is bigger AND slower!) */
- enum {
- WCNT = SKEIN1024_STATE_WORDS
- };
-#undef RCNT
-#define RCNT (SKEIN1024_ROUNDS_TOTAL/8)
-
-#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
-#define SKEIN_UNROLL_1024 ((SKEIN_LOOP)%10)
-#else
-#define SKEIN_UNROLL_1024 (0)
-#endif
-
-#if (SKEIN_UNROLL_1024 != 0)
-#if (RCNT % SKEIN_UNROLL_1024)
-#error "Invalid SKEIN_UNROLL_1024" /* sanity check on unroll count */
-#endif
- size_t r;
- u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
-#else
- u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
-#endif
-
- u64 X00, X01, X02, X03, X04, X05, X06, X07, /* local copy of vars, for speed */
- X08, X09, X10, X11, X12, X13, X14, X15;
- u64 w[WCNT]; /* local copy of input block */
-#ifdef SKEIN_DEBUG
- const u64 *Xptr[16]; /* use for debugging (help compiler put Xn in registers) */
- Xptr[0] = &X00; Xptr[1] = &X01; Xptr[2] = &X02; Xptr[3] = &X03;
- Xptr[4] = &X04; Xptr[5] = &X05; Xptr[6] = &X06; Xptr[7] = &X07;
- Xptr[8] = &X08; Xptr[9] = &X09; Xptr[10] = &X10; Xptr[11] = &X11;
- Xptr[12] = &X12; Xptr[13] = &X13; Xptr[14] = &X14; Xptr[15] = &X15;
-#endif
-
- Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
- ts[0] = ctx->h.T[0];
- ts[1] = ctx->h.T[1];
- do {
- /* this implementation only supports 2**64 input bytes (no carry out here) */
- ts[0] += byteCntAdd; /* update processed length */
-
- /* precompute the key schedule for this block */
- ks[0] = ctx->X[0];
- ks[1] = ctx->X[1];
- ks[2] = ctx->X[2];
- ks[3] = ctx->X[3];
- ks[4] = ctx->X[4];
- ks[5] = ctx->X[5];
- ks[6] = ctx->X[6];
- ks[7] = ctx->X[7];
- ks[8] = ctx->X[8];
- ks[9] = ctx->X[9];
- ks[10] = ctx->X[10];
- ks[11] = ctx->X[11];
- ks[12] = ctx->X[12];
- ks[13] = ctx->X[13];
- ks[14] = ctx->X[14];
- ks[15] = ctx->X[15];
- ks[16] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^
- ks[4] ^ ks[5] ^ ks[6] ^ ks[7] ^
- ks[8] ^ ks[9] ^ ks[10] ^ ks[11] ^
- ks[12] ^ ks[13] ^ ks[14] ^ ks[15] ^ SKEIN_KS_PARITY;
-
- ts[2] = ts[0] ^ ts[1];
-
- Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
- DebugSaveTweak(ctx);
- Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
-
- X00 = w[0] + ks[0]; /* do the first full key injection */
- X01 = w[1] + ks[1];
- X02 = w[2] + ks[2];
- X03 = w[3] + ks[3];
- X04 = w[4] + ks[4];
- X05 = w[5] + ks[5];
- X06 = w[6] + ks[6];
- X07 = w[7] + ks[7];
- X08 = w[8] + ks[8];
- X09 = w[9] + ks[9];
- X10 = w[10] + ks[10];
- X11 = w[11] + ks[11];
- X12 = w[12] + ks[12];
- X13 = w[13] + ks[13] + ts[0];
- X14 = w[14] + ks[14] + ts[1];
- X15 = w[15] + ks[15];
-
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr);
-
-#define Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rNum) \
- X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
- X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
- X##p4 += X##p5; X##p5 = RotL_64(X##p5, ROT##_2); X##p5 ^= X##p4; \
- X##p6 += X##p7; X##p7 = RotL_64(X##p7, ROT##_3); X##p7 ^= X##p6; \
- X##p8 += X##p9; X##p9 = RotL_64(X##p9, ROT##_4); X##p9 ^= X##p8; \
- X##pA += X##pB; X##pB = RotL_64(X##pB, ROT##_5); X##pB ^= X##pA; \
- X##pC += X##pD; X##pD = RotL_64(X##pD, ROT##_6); X##pD ^= X##pC; \
- X##pE += X##pF; X##pF = RotL_64(X##pF, ROT##_7); X##pF ^= X##pE; \
-
-#if SKEIN_UNROLL_1024 == 0
-#define R1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
- Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rn, Xptr);
-
-#define I1024(R) \
- X00 += ks[((R) + 1) % 17]; /* inject the key schedule value */ \
- X01 += ks[((R) + 2) % 17]; \
- X02 += ks[((R) + 3) % 17]; \
- X03 += ks[((R) + 4) % 17]; \
- X04 += ks[((R) + 5) % 17]; \
- X05 += ks[((R) + 6) % 17]; \
- X06 += ks[((R) + 7) % 17]; \
- X07 += ks[((R) + 8) % 17]; \
- X08 += ks[((R) + 9) % 17]; \
- X09 += ks[((R) + 10) % 17]; \
- X10 += ks[((R) + 11) % 17]; \
- X11 += ks[((R) + 12) % 17]; \
- X12 += ks[((R) + 13) % 17]; \
- X13 += ks[((R) + 14) % 17] + ts[((R) + 1) % 3]; \
- X14 += ks[((R) + 15) % 17] + ts[((R) + 2) % 3]; \
- X15 += ks[((R) + 16) % 17] + (R) + 1; \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-#else /* looping version */
-#define R1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
- Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
- Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rn, Xptr);
-
-#define I1024(R) \
- X00 += ks[r + (R) + 0]; /* inject the key schedule value */ \
- X01 += ks[r + (R) + 1]; \
- X02 += ks[r + (R) + 2]; \
- X03 += ks[r + (R) + 3]; \
- X04 += ks[r + (R) + 4]; \
- X05 += ks[r + (R) + 5]; \
- X06 += ks[r + (R) + 6]; \
- X07 += ks[r + (R) + 7]; \
- X08 += ks[r + (R) + 8]; \
- X09 += ks[r + (R) + 9]; \
- X10 += ks[r + (R) + 10]; \
- X11 += ks[r + (R) + 11]; \
- X12 += ks[r + (R) + 12]; \
- X13 += ks[r + (R) + 13] + ts[r + (R) + 0]; \
- X14 += ks[r + (R) + 14] + ts[r + (R) + 1]; \
- X15 += ks[r + (R) + 15] + r + (R); \
- ks[r + (R) + 16] = ks[r + (R) - 1]; /* rotate key schedule */\
- ts[r + (R) + 2] = ts[r + (R) - 1]; \
- Skein_Show_R_Ptr(BLK_BITSi, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
-
- for (r = 1; r <= 2 * RCNT; r += 2 * SKEIN_UNROLL_1024) /* loop thru it */
-#endif
- {
-#define R1024_8_rounds(R) /* do 8 full rounds */ \
- R1024(00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, R1024_0, 8*(R) + 1); \
- R1024(00, 09, 02, 13, 06, 11, 04, 15, 10, 07, 12, 03, 14, 05, 08, 01, R1024_1, 8*(R) + 2); \
- R1024(00, 07, 02, 05, 04, 03, 06, 01, 12, 15, 14, 13, 08, 11, 10, 09, R1024_2, 8*(R) + 3); \
- R1024(00, 15, 02, 11, 06, 13, 04, 09, 14, 01, 08, 05, 10, 03, 12, 07, R1024_3, 8*(R) + 4); \
- I1024(2*(R)); \
- R1024(00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, R1024_4, 8*(R) + 5); \
- R1024(00, 09, 02, 13, 06, 11, 04, 15, 10, 07, 12, 03, 14, 05, 08, 01, R1024_5, 8*(R) + 6); \
- R1024(00, 07, 02, 05, 04, 03, 06, 01, 12, 15, 14, 13, 08, 11, 10, 09, R1024_6, 8*(R) + 7); \
- R1024(00, 15, 02, 11, 06, 13, 04, 09, 14, 01, 08, 05, 10, 03, 12, 07, R1024_7, 8*(R) + 8); \
- I1024(2*(R)+1);
-
- R1024_8_rounds(0);
-
-#define R1024_Unroll_R(NN) ((SKEIN_UNROLL_1024 == 0 && SKEIN1024_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_1024 > (NN)))
-
- #if R1024_Unroll_R(1)
- R1024_8_rounds(1);
- #endif
- #if R1024_Unroll_R(2)
- R1024_8_rounds(2);
- #endif
- #if R1024_Unroll_R(3)
- R1024_8_rounds(3);
- #endif
- #if R1024_Unroll_R(4)
- R1024_8_rounds(4);
- #endif
- #if R1024_Unroll_R(5)
- R1024_8_rounds(5);
- #endif
- #if R1024_Unroll_R(6)
- R1024_8_rounds(6);
- #endif
- #if R1024_Unroll_R(7)
- R1024_8_rounds(7);
- #endif
- #if R1024_Unroll_R(8)
- R1024_8_rounds(8);
- #endif
- #if R1024_Unroll_R(9)
- R1024_8_rounds(9);
- #endif
- #if R1024_Unroll_R(10)
- R1024_8_rounds(10);
- #endif
- #if R1024_Unroll_R(11)
- R1024_8_rounds(11);
- #endif
- #if R1024_Unroll_R(12)
- R1024_8_rounds(12);
- #endif
- #if R1024_Unroll_R(13)
- R1024_8_rounds(13);
- #endif
- #if R1024_Unroll_R(14)
- R1024_8_rounds(14);
- #endif
- #if (SKEIN_UNROLL_1024 > 14)
-#error "need more unrolling in Skein_1024_Process_Block"
- #endif
- }
- /* do the final "feedforward" xor, update context chaining vars */
-
- ctx->X[0] = X00 ^ w[0];
- ctx->X[1] = X01 ^ w[1];
- ctx->X[2] = X02 ^ w[2];
- ctx->X[3] = X03 ^ w[3];
- ctx->X[4] = X04 ^ w[4];
- ctx->X[5] = X05 ^ w[5];
- ctx->X[6] = X06 ^ w[6];
- ctx->X[7] = X07 ^ w[7];
- ctx->X[8] = X08 ^ w[8];
- ctx->X[9] = X09 ^ w[9];
- ctx->X[10] = X10 ^ w[10];
- ctx->X[11] = X11 ^ w[11];
- ctx->X[12] = X12 ^ w[12];
- ctx->X[13] = X13 ^ w[13];
- ctx->X[14] = X14 ^ w[14];
- ctx->X[15] = X15 ^ w[15];
-
- Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
-
- ts[1] &= ~SKEIN_T1_FLAG_FIRST;
- blkPtr += SKEIN1024_BLOCK_BYTES;
- }
- while (--blkCnt);
- ctx->h.T[0] = ts[0];
- ctx->h.T[1] = ts[1];
- }
-
-#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
-size_t Skein1024_Process_Block_CodeSize(void)
- {
- return ((u8 *) Skein1024_Process_Block_CodeSize) -
- ((u8 *) Skein1024_Process_Block);
- }
-unsigned int Skein1024_Unroll_Cnt(void)
- {
- return SKEIN_UNROLL_1024;
- }
-#endif
-#endif
+/***********************************************************************
+**
+** Implementation of the Skein block functions.
+**
+** Source code author: Doug Whiting, 2008.
+**
+** This algorithm and source code is released to the public domain.
+**
+** Compile-time switches:
+**
+** SKEIN_USE_ASM -- set bits (256/512/1024) to select which
+** versions use ASM code for block processing
+** [default: use C for all block sizes]
+**
+************************************************************************/
+
+#include <linux/string.h>
+#include <skein.h>
+
+#ifndef SKEIN_USE_ASM
+#define SKEIN_USE_ASM (0) /* default is all C code (no ASM) */
+#endif
+
+#ifndef SKEIN_LOOP
+#define SKEIN_LOOP 001 /* default: unroll 256 and 512, but not 1024 */
+#endif
+
+#define BLK_BITS (WCNT*64) /* some useful definitions for code here */
+#define KW_TWK_BASE (0)
+#define KW_KEY_BASE (3)
+#define ks (kw + KW_KEY_BASE)
+#define ts (kw + KW_TWK_BASE)
+
+#ifdef SKEIN_DEBUG
+#define DebugSaveTweak(ctx) { ctx->h.T[0] = ts[0]; ctx->h.T[1] = ts[1]; }
+#else
+#define DebugSaveTweak(ctx)
+#endif
+
+/***************************** Skein_256 ******************************/
+#if !(SKEIN_USE_ASM & 256)
+void Skein_256_Process_Block(struct skein_256_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
+ { /* do it in C */
+ enum {
+ WCNT = SKEIN_256_STATE_WORDS
+ };
+#undef RCNT
+#define RCNT (SKEIN_256_ROUNDS_TOTAL/8)
+
+#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
+#define SKEIN_UNROLL_256 (((SKEIN_LOOP)/100)%10)
+#else
+#define SKEIN_UNROLL_256 (0)
+#endif
+
+#if SKEIN_UNROLL_256
+#if (RCNT % SKEIN_UNROLL_256)
+#error "Invalid SKEIN_UNROLL_256" /* sanity check on unroll count */
+#endif
+ size_t r;
+ u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
+#else
+ u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
+#endif
+ u64 X0, X1, X2, X3; /* local copy of context vars, for speed */
+ u64 w[WCNT]; /* local copy of input block */
+#ifdef SKEIN_DEBUG
+ const u64 *Xptr[4]; /* use for debugging (help compiler put Xn in registers) */
+ Xptr[0] = &X0; Xptr[1] = &X1; Xptr[2] = &X2; Xptr[3] = &X3;
+#endif
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ ts[0] = ctx->h.T[0];
+ ts[1] = ctx->h.T[1];
+ do {
+ /* this implementation only supports 2**64 input bytes (no carry out here) */
+ ts[0] += byteCntAdd; /* update processed length */
+
+ /* precompute the key schedule for this block */
+ ks[0] = ctx->X[0];
+ ks[1] = ctx->X[1];
+ ks[2] = ctx->X[2];
+ ks[3] = ctx->X[3];
+ ks[4] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^ SKEIN_KS_PARITY;
+
+ ts[2] = ts[0] ^ ts[1];
+
+ Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
+ DebugSaveTweak(ctx);
+ Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
+
+ X0 = w[0] + ks[0]; /* do the first full key injection */
+ X1 = w[1] + ks[1] + ts[0];
+ X2 = w[2] + ks[2] + ts[1];
+ X3 = w[3] + ks[3];
+
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr); /* show starting state values */
+
+ blkPtr += SKEIN_256_BLOCK_BYTES;
+
+ /* run the rounds */
+
+#define Round256(p0, p1, p2, p3, ROT, rNum) \
+ X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
+ X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
+
+#if SKEIN_UNROLL_256 == 0
+#define R256(p0, p1, p2, p3, ROT, rNum) /* fully unrolled */ \
+ Round256(p0, p1, p2, p3, ROT, rNum) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rNum, Xptr);
+
+#define I256(R) \
+ X0 += ks[((R)+1) % 5]; /* inject the key schedule value */ \
+ X1 += ks[((R)+2) % 5] + ts[((R)+1) % 3]; \
+ X2 += ks[((R)+3) % 5] + ts[((R)+2) % 3]; \
+ X3 += ks[((R)+4) % 5] + (R)+1; \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+#else /* looping version */
+#define R256(p0, p1, p2, p3, ROT, rNum) \
+ Round256(p0, p1, p2, p3, ROT, rNum) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rNum, Xptr);
+
+#define I256(R) \
+ X0 += ks[r+(R)+0]; /* inject the key schedule value */ \
+ X1 += ks[r+(R)+1] + ts[r+(R)+0]; \
+ X2 += ks[r+(R)+2] + ts[r+(R)+1]; \
+ X3 += ks[r+(R)+3] + r+(R); \
+ ks[r + (R) + 4] = ks[r + (R) - 1]; /* rotate key schedule */\
+ ts[r + (R) + 2] = ts[r + (R) - 1]; \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+
+ for (r = 1; r < 2 * RCNT; r += 2 * SKEIN_UNROLL_256) /* loop thru it */
+#endif
+ {
+#define R256_8_rounds(R) \
+ R256(0, 1, 2, 3, R_256_0, 8 * (R) + 1); \
+ R256(0, 3, 2, 1, R_256_1, 8 * (R) + 2); \
+ R256(0, 1, 2, 3, R_256_2, 8 * (R) + 3); \
+ R256(0, 3, 2, 1, R_256_3, 8 * (R) + 4); \
+ I256(2 * (R)); \
+ R256(0, 1, 2, 3, R_256_4, 8 * (R) + 5); \
+ R256(0, 3, 2, 1, R_256_5, 8 * (R) + 6); \
+ R256(0, 1, 2, 3, R_256_6, 8 * (R) + 7); \
+ R256(0, 3, 2, 1, R_256_7, 8 * (R) + 8); \
+ I256(2 * (R) + 1);
+
+ R256_8_rounds(0);
+
+#define R256_Unroll_R(NN) ((SKEIN_UNROLL_256 == 0 && SKEIN_256_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_256 > (NN)))
+
+ #if R256_Unroll_R(1)
+ R256_8_rounds(1);
+ #endif
+ #if R256_Unroll_R(2)
+ R256_8_rounds(2);
+ #endif
+ #if R256_Unroll_R(3)
+ R256_8_rounds(3);
+ #endif
+ #if R256_Unroll_R(4)
+ R256_8_rounds(4);
+ #endif
+ #if R256_Unroll_R(5)
+ R256_8_rounds(5);
+ #endif
+ #if R256_Unroll_R(6)
+ R256_8_rounds(6);
+ #endif
+ #if R256_Unroll_R(7)
+ R256_8_rounds(7);
+ #endif
+ #if R256_Unroll_R(8)
+ R256_8_rounds(8);
+ #endif
+ #if R256_Unroll_R(9)
+ R256_8_rounds(9);
+ #endif
+ #if R256_Unroll_R(10)
+ R256_8_rounds(10);
+ #endif
+ #if R256_Unroll_R(11)
+ R256_8_rounds(11);
+ #endif
+ #if R256_Unroll_R(12)
+ R256_8_rounds(12);
+ #endif
+ #if R256_Unroll_R(13)
+ R256_8_rounds(13);
+ #endif
+ #if R256_Unroll_R(14)
+ R256_8_rounds(14);
+ #endif
+ #if (SKEIN_UNROLL_256 > 14)
+#error "need more unrolling in Skein_256_Process_Block"
+ #endif
+ }
+ /* do the final "feedforward" xor, update context chaining vars */
+ ctx->X[0] = X0 ^ w[0];
+ ctx->X[1] = X1 ^ w[1];
+ ctx->X[2] = X2 ^ w[2];
+ ctx->X[3] = X3 ^ w[3];
+
+ Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
+
+ ts[1] &= ~SKEIN_T1_FLAG_FIRST;
+ }
+ while (--blkCnt);
+ ctx->h.T[0] = ts[0];
+ ctx->h.T[1] = ts[1];
+ }
+
+#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
+size_t Skein_256_Process_Block_CodeSize(void)
+ {
+ return ((u8 *) Skein_256_Process_Block_CodeSize) -
+ ((u8 *) Skein_256_Process_Block);
+ }
+unsigned int Skein_256_Unroll_Cnt(void)
+ {
+ return SKEIN_UNROLL_256;
+ }
+#endif
+#endif
+
+/***************************** Skein_512 ******************************/
+#if !(SKEIN_USE_ASM & 512)
+void Skein_512_Process_Block(struct skein_512_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
+ { /* do it in C */
+ enum {
+ WCNT = SKEIN_512_STATE_WORDS
+ };
+#undef RCNT
+#define RCNT (SKEIN_512_ROUNDS_TOTAL/8)
+
+#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
+#define SKEIN_UNROLL_512 (((SKEIN_LOOP)/10)%10)
+#else
+#define SKEIN_UNROLL_512 (0)
+#endif
+
+#if SKEIN_UNROLL_512
+#if (RCNT % SKEIN_UNROLL_512)
+#error "Invalid SKEIN_UNROLL_512" /* sanity check on unroll count */
+#endif
+ size_t r;
+ u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
+#else
+ u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
+#endif
+ u64 X0, X1, X2, X3, X4, X5, X6, X7; /* local copy of vars, for speed */
+ u64 w[WCNT]; /* local copy of input block */
+#ifdef SKEIN_DEBUG
+ const u64 *Xptr[8]; /* use for debugging (help compiler put Xn in registers) */
+ Xptr[0] = &X0; Xptr[1] = &X1; Xptr[2] = &X2; Xptr[3] = &X3;
+ Xptr[4] = &X4; Xptr[5] = &X5; Xptr[6] = &X6; Xptr[7] = &X7;
+#endif
+
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ ts[0] = ctx->h.T[0];
+ ts[1] = ctx->h.T[1];
+ do {
+ /* this implementation only supports 2**64 input bytes (no carry out here) */
+ ts[0] += byteCntAdd; /* update processed length */
+
+ /* precompute the key schedule for this block */
+ ks[0] = ctx->X[0];
+ ks[1] = ctx->X[1];
+ ks[2] = ctx->X[2];
+ ks[3] = ctx->X[3];
+ ks[4] = ctx->X[4];
+ ks[5] = ctx->X[5];
+ ks[6] = ctx->X[6];
+ ks[7] = ctx->X[7];
+ ks[8] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^
+ ks[4] ^ ks[5] ^ ks[6] ^ ks[7] ^ SKEIN_KS_PARITY;
+
+ ts[2] = ts[0] ^ ts[1];
+
+ Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
+ DebugSaveTweak(ctx);
+ Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
+
+ X0 = w[0] + ks[0]; /* do the first full key injection */
+ X1 = w[1] + ks[1];
+ X2 = w[2] + ks[2];
+ X3 = w[3] + ks[3];
+ X4 = w[4] + ks[4];
+ X5 = w[5] + ks[5] + ts[0];
+ X6 = w[6] + ks[6] + ts[1];
+ X7 = w[7] + ks[7];
+
+ blkPtr += SKEIN_512_BLOCK_BYTES;
+
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr);
+ /* run the rounds */
+#define Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
+ X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
+ X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
+ X##p4 += X##p5; X##p5 = RotL_64(X##p5, ROT##_2); X##p5 ^= X##p4; \
+ X##p6 += X##p7; X##p7 = RotL_64(X##p7, ROT##_3); X##p7 ^= X##p6; \
+
+#if SKEIN_UNROLL_512 == 0
+#define R512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) /* unrolled */ \
+ Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rNum, Xptr);
+
+#define I512(R) \
+ X0 += ks[((R) + 1) % 9]; /* inject the key schedule value */ \
+ X1 += ks[((R) + 2) % 9]; \
+ X2 += ks[((R) + 3) % 9]; \
+ X3 += ks[((R) + 4) % 9]; \
+ X4 += ks[((R) + 5) % 9]; \
+ X5 += ks[((R) + 6) % 9] + ts[((R) + 1) % 3]; \
+ X6 += ks[((R) + 7) % 9] + ts[((R) + 2) % 3]; \
+ X7 += ks[((R) + 8) % 9] + (R) + 1; \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+#else /* looping version */
+#define R512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
+ Round512(p0, p1, p2, p3, p4, p5, p6, p7, ROT, rNum) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rNum, Xptr);
+
+#define I512(R) \
+ X0 += ks[r + (R) + 0]; /* inject the key schedule value */ \
+ X1 += ks[r + (R) + 1]; \
+ X2 += ks[r + (R) + 2]; \
+ X3 += ks[r + (R) + 3]; \
+ X4 += ks[r + (R) + 4]; \
+ X5 += ks[r + (R) + 5] + ts[r + (R) + 0]; \
+ X6 += ks[r + (R) + 6] + ts[r + (R) + 1]; \
+ X7 += ks[r + (R) + 7] + r + (R); \
+ ks[r + (R) + 8] = ks[r + (R) - 1]; /* rotate key schedule */ \
+ ts[r + (R) + 2] = ts[r + (R) - 1]; \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+
+ for (r = 1; r < 2 * RCNT; r += 2 * SKEIN_UNROLL_512) /* loop thru it */
+#endif /* end of looped code definitions */
+ {
+#define R512_8_rounds(R) /* do 8 full rounds */ \
+ R512(0, 1, 2, 3, 4, 5, 6, 7, R_512_0, 8 * (R) + 1); \
+ R512(2, 1, 4, 7, 6, 5, 0, 3, R_512_1, 8 * (R) + 2); \
+ R512(4, 1, 6, 3, 0, 5, 2, 7, R_512_2, 8 * (R) + 3); \
+ R512(6, 1, 0, 7, 2, 5, 4, 3, R_512_3, 8 * (R) + 4); \
+ I512(2 * (R)); \
+ R512(0, 1, 2, 3, 4, 5, 6, 7, R_512_4, 8 * (R) + 5); \
+ R512(2, 1, 4, 7, 6, 5, 0, 3, R_512_5, 8 * (R) + 6); \
+ R512(4, 1, 6, 3, 0, 5, 2, 7, R_512_6, 8 * (R) + 7); \
+ R512(6, 1, 0, 7, 2, 5, 4, 3, R_512_7, 8 * (R) + 8); \
+ I512(2 * (R) + 1); /* and key injection */
+
+ R512_8_rounds(0);
+
+#define R512_Unroll_R(NN) ((SKEIN_UNROLL_512 == 0 && SKEIN_512_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_512 > (NN)))
+
+ #if R512_Unroll_R(1)
+ R512_8_rounds(1);
+ #endif
+ #if R512_Unroll_R(2)
+ R512_8_rounds(2);
+ #endif
+ #if R512_Unroll_R(3)
+ R512_8_rounds(3);
+ #endif
+ #if R512_Unroll_R(4)
+ R512_8_rounds(4);
+ #endif
+ #if R512_Unroll_R(5)
+ R512_8_rounds(5);
+ #endif
+ #if R512_Unroll_R(6)
+ R512_8_rounds(6);
+ #endif
+ #if R512_Unroll_R(7)
+ R512_8_rounds(7);
+ #endif
+ #if R512_Unroll_R(8)
+ R512_8_rounds(8);
+ #endif
+ #if R512_Unroll_R(9)
+ R512_8_rounds(9);
+ #endif
+ #if R512_Unroll_R(10)
+ R512_8_rounds(10);
+ #endif
+ #if R512_Unroll_R(11)
+ R512_8_rounds(11);
+ #endif
+ #if R512_Unroll_R(12)
+ R512_8_rounds(12);
+ #endif
+ #if R512_Unroll_R(13)
+ R512_8_rounds(13);
+ #endif
+ #if R512_Unroll_R(14)
+ R512_8_rounds(14);
+ #endif
+ #if (SKEIN_UNROLL_512 > 14)
+#error "need more unrolling in Skein_512_Process_Block"
+ #endif
+ }
+
+ /* do the final "feedforward" xor, update context chaining vars */
+ ctx->X[0] = X0 ^ w[0];
+ ctx->X[1] = X1 ^ w[1];
+ ctx->X[2] = X2 ^ w[2];
+ ctx->X[3] = X3 ^ w[3];
+ ctx->X[4] = X4 ^ w[4];
+ ctx->X[5] = X5 ^ w[5];
+ ctx->X[6] = X6 ^ w[6];
+ ctx->X[7] = X7 ^ w[7];
+ Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
+
+ ts[1] &= ~SKEIN_T1_FLAG_FIRST;
+ }
+ while (--blkCnt);
+ ctx->h.T[0] = ts[0];
+ ctx->h.T[1] = ts[1];
+ }
+
+#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
+size_t Skein_512_Process_Block_CodeSize(void)
+ {
+ return ((u8 *) Skein_512_Process_Block_CodeSize) -
+ ((u8 *) Skein_512_Process_Block);
+ }
+unsigned int Skein_512_Unroll_Cnt(void)
+ {
+ return SKEIN_UNROLL_512;
+ }
+#endif
+#endif
+
+/***************************** Skein1024 ******************************/
+#if !(SKEIN_USE_ASM & 1024)
+void Skein1024_Process_Block(struct skein1024_ctx *ctx, const u8 *blkPtr, size_t blkCnt, size_t byteCntAdd)
+ { /* do it in C, always looping (unrolled is bigger AND slower!) */
+ enum {
+ WCNT = SKEIN1024_STATE_WORDS
+ };
+#undef RCNT
+#define RCNT (SKEIN1024_ROUNDS_TOTAL/8)
+
+#ifdef SKEIN_LOOP /* configure how much to unroll the loop */
+#define SKEIN_UNROLL_1024 ((SKEIN_LOOP)%10)
+#else
+#define SKEIN_UNROLL_1024 (0)
+#endif
+
+#if (SKEIN_UNROLL_1024 != 0)
+#if (RCNT % SKEIN_UNROLL_1024)
+#error "Invalid SKEIN_UNROLL_1024" /* sanity check on unroll count */
+#endif
+ size_t r;
+ u64 kw[WCNT+4+RCNT*2]; /* key schedule words : chaining vars + tweak + "rotation"*/
+#else
+ u64 kw[WCNT+4]; /* key schedule words : chaining vars + tweak */
+#endif
+
+ u64 X00, X01, X02, X03, X04, X05, X06, X07, /* local copy of vars, for speed */
+ X08, X09, X10, X11, X12, X13, X14, X15;
+ u64 w[WCNT]; /* local copy of input block */
+#ifdef SKEIN_DEBUG
+ const u64 *Xptr[16]; /* use for debugging (help compiler put Xn in registers) */
+ Xptr[0] = &X00; Xptr[1] = &X01; Xptr[2] = &X02; Xptr[3] = &X03;
+ Xptr[4] = &X04; Xptr[5] = &X05; Xptr[6] = &X06; Xptr[7] = &X07;
+ Xptr[8] = &X08; Xptr[9] = &X09; Xptr[10] = &X10; Xptr[11] = &X11;
+ Xptr[12] = &X12; Xptr[13] = &X13; Xptr[14] = &X14; Xptr[15] = &X15;
+#endif
+
+ Skein_assert(blkCnt != 0); /* never call with blkCnt == 0! */
+ ts[0] = ctx->h.T[0];
+ ts[1] = ctx->h.T[1];
+ do {
+ /* this implementation only supports 2**64 input bytes (no carry out here) */
+ ts[0] += byteCntAdd; /* update processed length */
+
+ /* precompute the key schedule for this block */
+ ks[0] = ctx->X[0];
+ ks[1] = ctx->X[1];
+ ks[2] = ctx->X[2];
+ ks[3] = ctx->X[3];
+ ks[4] = ctx->X[4];
+ ks[5] = ctx->X[5];
+ ks[6] = ctx->X[6];
+ ks[7] = ctx->X[7];
+ ks[8] = ctx->X[8];
+ ks[9] = ctx->X[9];
+ ks[10] = ctx->X[10];
+ ks[11] = ctx->X[11];
+ ks[12] = ctx->X[12];
+ ks[13] = ctx->X[13];
+ ks[14] = ctx->X[14];
+ ks[15] = ctx->X[15];
+ ks[16] = ks[0] ^ ks[1] ^ ks[2] ^ ks[3] ^
+ ks[4] ^ ks[5] ^ ks[6] ^ ks[7] ^
+ ks[8] ^ ks[9] ^ ks[10] ^ ks[11] ^
+ ks[12] ^ ks[13] ^ ks[14] ^ ks[15] ^ SKEIN_KS_PARITY;
+
+ ts[2] = ts[0] ^ ts[1];
+
+ Skein_Get64_LSB_First(w, blkPtr, WCNT); /* get input block in little-endian format */
+ DebugSaveTweak(ctx);
+ Skein_Show_Block(BLK_BITS, &ctx->h, ctx->X, blkPtr, w, ks, ts);
+
+ X00 = w[0] + ks[0]; /* do the first full key injection */
+ X01 = w[1] + ks[1];
+ X02 = w[2] + ks[2];
+ X03 = w[3] + ks[3];
+ X04 = w[4] + ks[4];
+ X05 = w[5] + ks[5];
+ X06 = w[6] + ks[6];
+ X07 = w[7] + ks[7];
+ X08 = w[8] + ks[8];
+ X09 = w[9] + ks[9];
+ X10 = w[10] + ks[10];
+ X11 = w[11] + ks[11];
+ X12 = w[12] + ks[12];
+ X13 = w[13] + ks[13] + ts[0];
+ X14 = w[14] + ks[14] + ts[1];
+ X15 = w[15] + ks[15];
+
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INITIAL, Xptr);
+
+#define Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rNum) \
+ X##p0 += X##p1; X##p1 = RotL_64(X##p1, ROT##_0); X##p1 ^= X##p0; \
+ X##p2 += X##p3; X##p3 = RotL_64(X##p3, ROT##_1); X##p3 ^= X##p2; \
+ X##p4 += X##p5; X##p5 = RotL_64(X##p5, ROT##_2); X##p5 ^= X##p4; \
+ X##p6 += X##p7; X##p7 = RotL_64(X##p7, ROT##_3); X##p7 ^= X##p6; \
+ X##p8 += X##p9; X##p9 = RotL_64(X##p9, ROT##_4); X##p9 ^= X##p8; \
+ X##pA += X##pB; X##pB = RotL_64(X##pB, ROT##_5); X##pB ^= X##pA; \
+ X##pC += X##pD; X##pD = RotL_64(X##pD, ROT##_6); X##pD ^= X##pC; \
+ X##pE += X##pF; X##pF = RotL_64(X##pF, ROT##_7); X##pF ^= X##pE; \
+
+#if SKEIN_UNROLL_1024 == 0
+#define R1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
+ Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, rn, Xptr);
+
+#define I1024(R) \
+ X00 += ks[((R) + 1) % 17]; /* inject the key schedule value */ \
+ X01 += ks[((R) + 2) % 17]; \
+ X02 += ks[((R) + 3) % 17]; \
+ X03 += ks[((R) + 4) % 17]; \
+ X04 += ks[((R) + 5) % 17]; \
+ X05 += ks[((R) + 6) % 17]; \
+ X06 += ks[((R) + 7) % 17]; \
+ X07 += ks[((R) + 8) % 17]; \
+ X08 += ks[((R) + 9) % 17]; \
+ X09 += ks[((R) + 10) % 17]; \
+ X10 += ks[((R) + 11) % 17]; \
+ X11 += ks[((R) + 12) % 17]; \
+ X12 += ks[((R) + 13) % 17]; \
+ X13 += ks[((R) + 14) % 17] + ts[((R) + 1) % 3]; \
+ X14 += ks[((R) + 15) % 17] + ts[((R) + 2) % 3]; \
+ X15 += ks[((R) + 16) % 17] + (R) + 1; \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+#else /* looping version */
+#define R1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
+ Round1024(p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, pA, pB, pC, pD, pE, pF, ROT, rn) \
+ Skein_Show_R_Ptr(BLK_BITS, &ctx->h, 4 * (r - 1) + rn, Xptr);
+
+#define I1024(R) \
+ X00 += ks[r + (R) + 0]; /* inject the key schedule value */ \
+ X01 += ks[r + (R) + 1]; \
+ X02 += ks[r + (R) + 2]; \
+ X03 += ks[r + (R) + 3]; \
+ X04 += ks[r + (R) + 4]; \
+ X05 += ks[r + (R) + 5]; \
+ X06 += ks[r + (R) + 6]; \
+ X07 += ks[r + (R) + 7]; \
+ X08 += ks[r + (R) + 8]; \
+ X09 += ks[r + (R) + 9]; \
+ X10 += ks[r + (R) + 10]; \
+ X11 += ks[r + (R) + 11]; \
+ X12 += ks[r + (R) + 12]; \
+ X13 += ks[r + (R) + 13] + ts[r + (R) + 0]; \
+ X14 += ks[r + (R) + 14] + ts[r + (R) + 1]; \
+ X15 += ks[r + (R) + 15] + r + (R); \
+ ks[r + (R) + 16] = ks[r + (R) - 1]; /* rotate key schedule */\
+ ts[r + (R) + 2] = ts[r + (R) - 1]; \
+ Skein_Show_R_Ptr(BLK_BITSi, &ctx->h, SKEIN_RND_KEY_INJECT, Xptr);
+
+ for (r = 1; r <= 2 * RCNT; r += 2 * SKEIN_UNROLL_1024) /* loop thru it */
+#endif
+ {
+#define R1024_8_rounds(R) /* do 8 full rounds */ \
+ R1024(00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, R1024_0, 8*(R) + 1); \
+ R1024(00, 09, 02, 13, 06, 11, 04, 15, 10, 07, 12, 03, 14, 05, 08, 01, R1024_1, 8*(R) + 2); \
+ R1024(00, 07, 02, 05, 04, 03, 06, 01, 12, 15, 14, 13, 08, 11, 10, 09, R1024_2, 8*(R) + 3); \
+ R1024(00, 15, 02, 11, 06, 13, 04, 09, 14, 01, 08, 05, 10, 03, 12, 07, R1024_3, 8*(R) + 4); \
+ I1024(2*(R)); \
+ R1024(00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, R1024_4, 8*(R) + 5); \
+ R1024(00, 09, 02, 13, 06, 11, 04, 15, 10, 07, 12, 03, 14, 05, 08, 01, R1024_5, 8*(R) + 6); \
+ R1024(00, 07, 02, 05, 04, 03, 06, 01, 12, 15, 14, 13, 08, 11, 10, 09, R1024_6, 8*(R) + 7); \
+ R1024(00, 15, 02, 11, 06, 13, 04, 09, 14, 01, 08, 05, 10, 03, 12, 07, R1024_7, 8*(R) + 8); \
+ I1024(2*(R)+1);
+
+ R1024_8_rounds(0);
+
+#define R1024_Unroll_R(NN) ((SKEIN_UNROLL_1024 == 0 && SKEIN1024_ROUNDS_TOTAL/8 > (NN)) || (SKEIN_UNROLL_1024 > (NN)))
+
+ #if R1024_Unroll_R(1)
+ R1024_8_rounds(1);
+ #endif
+ #if R1024_Unroll_R(2)
+ R1024_8_rounds(2);
+ #endif
+ #if R1024_Unroll_R(3)
+ R1024_8_rounds(3);
+ #endif
+ #if R1024_Unroll_R(4)
+ R1024_8_rounds(4);
+ #endif
+ #if R1024_Unroll_R(5)
+ R1024_8_rounds(5);
+ #endif
+ #if R1024_Unroll_R(6)
+ R1024_8_rounds(6);
+ #endif
+ #if R1024_Unroll_R(7)
+ R1024_8_rounds(7);
+ #endif
+ #if R1024_Unroll_R(8)
+ R1024_8_rounds(8);
+ #endif
+ #if R1024_Unroll_R(9)
+ R1024_8_rounds(9);
+ #endif
+ #if R1024_Unroll_R(10)
+ R1024_8_rounds(10);
+ #endif
+ #if R1024_Unroll_R(11)
+ R1024_8_rounds(11);
+ #endif
+ #if R1024_Unroll_R(12)
+ R1024_8_rounds(12);
+ #endif
+ #if R1024_Unroll_R(13)
+ R1024_8_rounds(13);
+ #endif
+ #if R1024_Unroll_R(14)
+ R1024_8_rounds(14);
+ #endif
+ #if (SKEIN_UNROLL_1024 > 14)
+#error "need more unrolling in Skein_1024_Process_Block"
+ #endif
+ }
+ /* do the final "feedforward" xor, update context chaining vars */
+
+ ctx->X[0] = X00 ^ w[0];
+ ctx->X[1] = X01 ^ w[1];
+ ctx->X[2] = X02 ^ w[2];
+ ctx->X[3] = X03 ^ w[3];
+ ctx->X[4] = X04 ^ w[4];
+ ctx->X[5] = X05 ^ w[5];
+ ctx->X[6] = X06 ^ w[6];
+ ctx->X[7] = X07 ^ w[7];
+ ctx->X[8] = X08 ^ w[8];
+ ctx->X[9] = X09 ^ w[9];
+ ctx->X[10] = X10 ^ w[10];
+ ctx->X[11] = X11 ^ w[11];
+ ctx->X[12] = X12 ^ w[12];
+ ctx->X[13] = X13 ^ w[13];
+ ctx->X[14] = X14 ^ w[14];
+ ctx->X[15] = X15 ^ w[15];
+
+ Skein_Show_Round(BLK_BITS, &ctx->h, SKEIN_RND_FEED_FWD, ctx->X);
+
+ ts[1] &= ~SKEIN_T1_FLAG_FIRST;
+ blkPtr += SKEIN1024_BLOCK_BYTES;
+ }
+ while (--blkCnt);
+ ctx->h.T[0] = ts[0];
+ ctx->h.T[1] = ts[1];
+ }
+
+#if defined(SKEIN_CODE_SIZE) || defined(SKEIN_PERF)
+size_t Skein1024_Process_Block_CodeSize(void)
+ {
+ return ((u8 *) Skein1024_Process_Block_CodeSize) -
+ ((u8 *) Skein1024_Process_Block);
+ }
+unsigned int Skein1024_Unroll_Cnt(void)
+ {
+ return SKEIN_UNROLL_1024;
+ }
+#endif
+#endif
--
1.9.1
More information about the devel
mailing list