[PATCH 01/19] staging: comedi: amplc_pci230: reformat a load of comments
Ian Abbott
abbotti at mev.co.uk
Tue Jul 29 11:58:09 UTC 2014
Reformat a load of comments to fit in with the preferred coding style,
including the copyright and driver description comments at the top of
the file.
Signed-off-by: Ian Abbott <abbotti at mev.co.uk>
---
drivers/staging/comedi/drivers/amplc_pci230.c | 837 +++++++++++++++-----------
1 file changed, 489 insertions(+), 348 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index a61d990..cb86d04 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -1,188 +1,189 @@
- /*
- comedi/drivers/amplc_pci230.c
- Driver for Amplicon PCI230 and PCI260 Multifunction I/O boards.
-
- Copyright (C) 2001 Allan Willcox <allanwillcox at ozemail.com.au>
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000 David A. Schleef <ds at schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
+/*
+ * comedi/drivers/amplc_pci230.c
+ * Driver for Amplicon PCI230 and PCI260 Multifunction I/O boards.
+ *
+ * Copyright (C) 2001 Allan Willcox <allanwillcox at ozemail.com.au>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds at schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- */
/*
-Driver: amplc_pci230
-Description: Amplicon PCI230, PCI260 Multifunction I/O boards
-Author: Allan Willcox <allanwillcox at ozemail.com.au>,
- Steve D Sharples <steve.sharples at nottingham.ac.uk>,
- Ian Abbott <abbotti at mev.co.uk>
-Updated: Wed, 22 Oct 2008 12:34:49 +0100
-Devices: [Amplicon] PCI230 (pci230 or amplc_pci230),
- PCI230+ (pci230+ or amplc_pci230),
- PCI260 (pci260 or amplc_pci230), PCI260+ (pci260+ or amplc_pci230)
-Status: works
-
-Configuration options:
- [0] - PCI bus of device (optional).
- [1] - PCI slot of device (optional).
- If bus/slot is not specified, the first available PCI device
- will be used.
-
-Configuring a "amplc_pci230" will match any supported card and it will
-choose the best match, picking the "+" models if possible. Configuring
-a "pci230" will match a PCI230 or PCI230+ card and it will be treated as
-a PCI230. Configuring a "pci260" will match a PCI260 or PCI260+ card
-and it will be treated as a PCI260. Configuring a "pci230+" will match
-a PCI230+ card. Configuring a "pci260+" will match a PCI260+ card.
-
-Subdevices:
-
- PCI230(+) PCI260(+)
- --------- ---------
- Subdevices 3 1
- 0 AI AI
- 1 AO
- 2 DIO
-
-AI Subdevice:
-
- The AI subdevice has 16 single-ended channels or 8 differential
- channels.
-
- The PCI230 and PCI260 cards have 12-bit resolution. The PCI230+ and
- PCI260+ cards have 16-bit resolution.
-
- For differential mode, use inputs 2N and 2N+1 for channel N (e.g. use
- inputs 14 and 15 for channel 7). If the card is physically a PCI230
- or PCI260 then it actually uses a "pseudo-differential" mode where the
- inputs are sampled a few microseconds apart. The PCI230+ and PCI260+
- use true differential sampling. Another difference is that if the
- card is physically a PCI230 or PCI260, the inverting input is 2N,
- whereas for a PCI230+ or PCI260+ the inverting input is 2N+1. So if a
- PCI230 is physically replaced by a PCI230+ (or a PCI260 with a
- PCI260+) and differential mode is used, the differential inputs need
- to be physically swapped on the connector.
-
- The following input ranges are supported:
-
- 0 => [-10, +10] V
- 1 => [-5, +5] V
- 2 => [-2.5, +2.5] V
- 3 => [-1.25, +1.25] V
- 4 => [0, 10] V
- 5 => [0, 5] V
- 6 => [0, 2.5] V
-
-AI Commands:
-
- +=========+==============+===========+============+==========+
- |start_src|scan_begin_src|convert_src|scan_end_src| stop_src |
- +=========+==============+===========+============+==========+
- |TRIG_NOW | TRIG_FOLLOW |TRIG_TIMER | TRIG_COUNT |TRIG_NONE |
- |TRIG_INT | |TRIG_EXT(3)| |TRIG_COUNT|
- | | |TRIG_INT | | |
- | |--------------|-----------| | |
- | | TRIG_TIMER(1)|TRIG_TIMER | | |
- | | TRIG_EXT(2) | | | |
- | | TRIG_INT | | | |
- +---------+--------------+-----------+------------+----------+
-
- Note 1: If AI command and AO command are used simultaneously, only
- one may have scan_begin_src == TRIG_TIMER.
-
- Note 2: For PCI230 and PCI230+, scan_begin_src == TRIG_EXT uses
- DIO channel 16 (pin 49) which will need to be configured as
- a digital input. For PCI260+, the EXTTRIG/EXTCONVCLK input
- (pin 17) is used instead. For PCI230, scan_begin_src ==
- TRIG_EXT is not supported. The trigger is a rising edge
- on the input.
-
- Note 3: For convert_src == TRIG_EXT, the EXTTRIG/EXTCONVCLK input
- (pin 25 on PCI230(+), pin 17 on PCI260(+)) is used. The
- convert_arg value is interpreted as follows:
-
- convert_arg == (CR_EDGE | 0) => rising edge
- convert_arg == (CR_EDGE | CR_INVERT | 0) => falling edge
- convert_arg == 0 => falling edge (backwards compatibility)
- convert_arg == 1 => rising edge (backwards compatibility)
-
- All entries in the channel list must use the same analogue reference.
- If the analogue reference is not AREF_DIFF (not differential) each
- pair of channel numbers (0 and 1, 2 and 3, etc.) must use the same
- input range. The input ranges used in the sequence must be all
- bipolar (ranges 0 to 3) or all unipolar (ranges 4 to 6). The channel
- sequence must consist of 1 or more identical subsequences. Within the
- subsequence, channels must be in ascending order with no repeated
- channels. For example, the following sequences are valid: 0 1 2 3
- (single valid subsequence), 0 2 3 5 0 2 3 5 (repeated valid
- subsequence), 1 1 1 1 (repeated valid subsequence). The following
- sequences are invalid: 0 3 2 1 (invalid subsequence), 0 2 3 5 0 2 3
- (incompletely repeated subsequence). Some versions of the PCI230+ and
- PCI260+ have a bug that requires a subsequence longer than one entry
- long to include channel 0.
-
-AO Subdevice:
-
- The AO subdevice has 2 channels with 12-bit resolution.
-
- The following output ranges are supported:
-
- 0 => [0, 10] V
- 1 => [-10, +10] V
-
-AO Commands:
-
- +=========+==============+===========+============+==========+
- |start_src|scan_begin_src|convert_src|scan_end_src| stop_src |
- +=========+==============+===========+============+==========+
- |TRIG_INT | TRIG_TIMER(1)| TRIG_NOW | TRIG_COUNT |TRIG_NONE |
- | | TRIG_EXT(2) | | |TRIG_COUNT|
- | | TRIG_INT | | | |
- +---------+--------------+-----------+------------+----------+
-
- Note 1: If AI command and AO command are used simultaneously, only
- one may have scan_begin_src == TRIG_TIMER.
-
- Note 2: scan_begin_src == TRIG_EXT is only supported if the card is
- configured as a PCI230+ and is only supported on later
- versions of the card. As a card configured as a PCI230+ is
- not guaranteed to support external triggering, please consider
- this support to be a bonus. It uses the EXTTRIG/ EXTCONVCLK
- input (PCI230+ pin 25). Triggering will be on the rising edge
- unless the CR_INVERT flag is set in scan_begin_arg.
-
- The channels in the channel sequence must be in ascending order with
- no repeats. All entries in the channel sequence must use the same
- output range.
-
-DIO Subdevice:
-
- The DIO subdevice is a 8255 chip providing 24 DIO channels. The DIO
- channels are configurable as inputs or outputs in four groups:
-
- Port A - channels 0 to 7
- Port B - channels 8 to 15
- Port CL - channels 16 to 19
- Port CH - channels 20 to 23
-
- Only mode 0 of the 8255 chip is supported.
-
- Bit 0 of port C (DIO channel 16) is also used as an external scan
- trigger input for AI commands on PCI230 and PCI230+, so would need to
- be configured as an input to use it for that purpose.
-*/
+ * Driver: amplc_pci230
+ * Description: Amplicon PCI230, PCI260 Multifunction I/O boards
+ * Author: Allan Willcox <allanwillcox at ozemail.com.au>,
+ * Steve D Sharples <steve.sharples at nottingham.ac.uk>,
+ * Ian Abbott <abbotti at mev.co.uk>
+ * Updated: Wed, 22 Oct 2008 12:34:49 +0100
+ * Devices: [Amplicon] PCI230 (pci230 or amplc_pci230),
+ * PCI230+ (pci230+ or amplc_pci230),
+ * PCI260 (pci260 or amplc_pci230), PCI260+ (pci260+ or amplc_pci230)
+ * Status: works
+ *
+ * Configuration options:
+ * [0] - PCI bus of device (optional).
+ * [1] - PCI slot of device (optional).
+ * If bus/slot is not specified, the first available PCI device
+ * will be used.
+ *
+ * Configuring a "amplc_pci230" will match any supported card and it will
+ * choose the best match, picking the "+" models if possible. Configuring
+ * a "pci230" will match a PCI230 or PCI230+ card and it will be treated as
+ * a PCI230. Configuring a "pci260" will match a PCI260 or PCI260+ card
+ * and it will be treated as a PCI260. Configuring a "pci230+" will match
+ * a PCI230+ card. Configuring a "pci260+" will match a PCI260+ card.
+ *
+ * Subdevices:
+ *
+ * PCI230(+) PCI260(+)
+ * --------- ---------
+ * Subdevices 3 1
+ * 0 AI AI
+ * 1 AO
+ * 2 DIO
+ *
+ * AI Subdevice:
+ *
+ * The AI subdevice has 16 single-ended channels or 8 differential
+ * channels.
+ *
+ * The PCI230 and PCI260 cards have 12-bit resolution. The PCI230+ and
+ * PCI260+ cards have 16-bit resolution.
+ *
+ * For differential mode, use inputs 2N and 2N+1 for channel N (e.g. use
+ * inputs 14 and 15 for channel 7). If the card is physically a PCI230
+ * or PCI260 then it actually uses a "pseudo-differential" mode where the
+ * inputs are sampled a few microseconds apart. The PCI230+ and PCI260+
+ * use true differential sampling. Another difference is that if the
+ * card is physically a PCI230 or PCI260, the inverting input is 2N,
+ * whereas for a PCI230+ or PCI260+ the inverting input is 2N+1. So if a
+ * PCI230 is physically replaced by a PCI230+ (or a PCI260 with a
+ * PCI260+) and differential mode is used, the differential inputs need
+ * to be physically swapped on the connector.
+ *
+ * The following input ranges are supported:
+ *
+ * 0 => [-10, +10] V
+ * 1 => [-5, +5] V
+ * 2 => [-2.5, +2.5] V
+ * 3 => [-1.25, +1.25] V
+ * 4 => [0, 10] V
+ * 5 => [0, 5] V
+ * 6 => [0, 2.5] V
+ *
+ * AI Commands:
+ *
+ * +=========+==============+===========+============+==========+
+ * |start_src|scan_begin_src|convert_src|scan_end_src| stop_src |
+ * +=========+==============+===========+============+==========+
+ * |TRIG_NOW | TRIG_FOLLOW |TRIG_TIMER | TRIG_COUNT |TRIG_NONE |
+ * |TRIG_INT | |TRIG_EXT(3)| |TRIG_COUNT|
+ * | | |TRIG_INT | | |
+ * | |--------------|-----------| | |
+ * | | TRIG_TIMER(1)|TRIG_TIMER | | |
+ * | | TRIG_EXT(2) | | | |
+ * | | TRIG_INT | | | |
+ * +---------+--------------+-----------+------------+----------+
+ *
+ * Note 1: If AI command and AO command are used simultaneously, only
+ * one may have scan_begin_src == TRIG_TIMER.
+ *
+ * Note 2: For PCI230 and PCI230+, scan_begin_src == TRIG_EXT uses
+ * DIO channel 16 (pin 49) which will need to be configured as
+ * a digital input. For PCI260+, the EXTTRIG/EXTCONVCLK input
+ * (pin 17) is used instead. For PCI230, scan_begin_src ==
+ * TRIG_EXT is not supported. The trigger is a rising edge
+ * on the input.
+ *
+ * Note 3: For convert_src == TRIG_EXT, the EXTTRIG/EXTCONVCLK input
+ * (pin 25 on PCI230(+), pin 17 on PCI260(+)) is used. The
+ * convert_arg value is interpreted as follows:
+ *
+ * convert_arg == (CR_EDGE | 0) => rising edge
+ * convert_arg == (CR_EDGE | CR_INVERT | 0) => falling edge
+ * convert_arg == 0 => falling edge (backwards compatibility)
+ * convert_arg == 1 => rising edge (backwards compatibility)
+ *
+ * All entries in the channel list must use the same analogue reference.
+ * If the analogue reference is not AREF_DIFF (not differential) each
+ * pair of channel numbers (0 and 1, 2 and 3, etc.) must use the same
+ * input range. The input ranges used in the sequence must be all
+ * bipolar (ranges 0 to 3) or all unipolar (ranges 4 to 6). The channel
+ * sequence must consist of 1 or more identical subsequences. Within the
+ * subsequence, channels must be in ascending order with no repeated
+ * channels. For example, the following sequences are valid: 0 1 2 3
+ * (single valid subsequence), 0 2 3 5 0 2 3 5 (repeated valid
+ * subsequence), 1 1 1 1 (repeated valid subsequence). The following
+ * sequences are invalid: 0 3 2 1 (invalid subsequence), 0 2 3 5 0 2 3
+ * (incompletely repeated subsequence). Some versions of the PCI230+ and
+ * PCI260+ have a bug that requires a subsequence longer than one entry
+ * long to include channel 0.
+ *
+ * AO Subdevice:
+ *
+ * The AO subdevice has 2 channels with 12-bit resolution.
+ * The following output ranges are supported:
+ * 0 => [0, 10] V
+ * 1 => [-10, +10] V
+ *
+ * AO Commands:
+ *
+ * +=========+==============+===========+============+==========+
+ * |start_src|scan_begin_src|convert_src|scan_end_src| stop_src |
+ * +=========+==============+===========+============+==========+
+ * |TRIG_INT | TRIG_TIMER(1)| TRIG_NOW | TRIG_COUNT |TRIG_NONE |
+ * | | TRIG_EXT(2) | | |TRIG_COUNT|
+ * | | TRIG_INT | | | |
+ * +---------+--------------+-----------+------------+----------+
+ *
+ * Note 1: If AI command and AO command are used simultaneously, only
+ * one may have scan_begin_src == TRIG_TIMER.
+ *
+ * Note 2: scan_begin_src == TRIG_EXT is only supported if the card is
+ * configured as a PCI230+ and is only supported on later
+ * versions of the card. As a card configured as a PCI230+ is
+ * not guaranteed to support external triggering, please consider
+ * this support to be a bonus. It uses the EXTTRIG/ EXTCONVCLK
+ * input (PCI230+ pin 25). Triggering will be on the rising edge
+ * unless the CR_INVERT flag is set in scan_begin_arg.
+ *
+ * The channels in the channel sequence must be in ascending order with
+ * no repeats. All entries in the channel sequence must use the same
+ * output range.
+ *
+ * DIO Subdevice:
+ *
+ * The DIO subdevice is a 8255 chip providing 24 DIO channels. The DIO
+ * channels are configurable as inputs or outputs in four groups:
+ *
+ * Port A - channels 0 to 7
+ * Port B - channels 8 to 15
+ * Port CL - channels 16 to 19
+ * Port CH - channels 20 to 23
+ *
+ * Only mode 0 of the 8255 chip is supported.
+ *
+ * Bit 0 of port C (DIO channel 16) is also used as an external scan
+ * trigger input for AI commands on PCI230 and PCI230+, so would need to
+ * be configured as an input to use it for that purpose.
+ */
+
/*
-Extra triggered scan functionality, interrupt bug-fix added by Steve Sharples.
-Support for PCI230+/260+, more triggered scan functionality, and workarounds
-for (or detection of) various hardware problems added by Ian Abbott.
-*/
+ * Extra triggered scan functionality, interrupt bug-fix added by Steve
+ * Sharples. Support for PCI230+/260+, more triggered scan functionality,
+ * and workarounds for (or detection of) various hardware problems added
+ * by Ian Abbott.
+ */
#include <linux/module.h>
#include <linux/pci.h>
@@ -195,12 +196,16 @@ for (or detection of) various hardware problems added by Ian Abbott.
#include "8253.h"
#include "8255.h"
-/* PCI230 PCI configuration register information */
+/*
+ * PCI230 PCI configuration register information
+ */
#define PCI_DEVICE_ID_PCI230 0x0000
#define PCI_DEVICE_ID_PCI260 0x0006
#define PCI_DEVICE_ID_INVALID 0xffff
-/* PCI230 i/o space 1 registers. */
+/*
+ * PCI230 i/o space 1 registers.
+ */
#define PCI230_PPI_X_BASE 0x00 /* User PPI (82C55) base */
#define PCI230_PPI_X_A 0x00 /* User PPI (82C55) port A */
#define PCI230_PPI_X_B 0x01 /* User PPI (82C55) port B */
@@ -216,7 +221,9 @@ for (or detection of) various hardware problems added by Ian Abbott.
#define PCI230_INT_SCE 0x1E /* Interrupt source mask (w) */
#define PCI230_INT_STAT 0x1E /* Interrupt status (r) */
-/* PCI230 i/o space 2 registers. */
+/*
+ * PCI230 i/o space 2 registers.
+ */
#define PCI230_DACCON 0x00 /* DAC control */
#define PCI230_DACOUT1 0x02 /* DAC channel 0 (w) */
#define PCI230_DACOUT2 0x04 /* DAC channel 1 (w) (not FIFO mode) */
@@ -239,24 +246,34 @@ for (or detection of) various hardware problems added by Ian Abbott.
#define PCI230P2_DACSWTRIG 0x02 /* DAC soft trigger (FIFO mode) (r) */
#define PCI230P2_DACEN 0x06 /* DAC channel enable (FIFO mode) */
-/* Convertor related constants. */
-#define PCI230_DAC_SETTLE 5 /* Analogue output settling time in µs */
- /* (DAC itself is 1µs nominally). */
-#define PCI230_ADC_SETTLE 1 /* Analogue input settling time in µs */
- /* (ADC itself is 1.6µs nominally but we poll
- * anyway). */
-#define PCI230_MUX_SETTLE 10 /* ADC MUX settling time in µS */
- /* - 10µs for se, 20µs de. */
+/*
+ * Convertor related constants.
+ */
+/* Analogue output settling time in µs (DAC itself is 1µs nominally). */
+#define PCI230_DAC_SETTLE 5
+/*
+ * Analogue input settling time in µs (ADC itself is 1.6µs nominally but we
+ * poll anyway).
+ */
+#define PCI230_ADC_SETTLE 1
+/* ADC MUX settling time in µS - 10µs for se, 20µs de. */
+#define PCI230_MUX_SETTLE 10
-/* DACCON read-write values. */
+/*
+ * DACCON read-write values.
+ */
#define PCI230_DAC_OR_UNI (0<<0) /* Output range unipolar */
#define PCI230_DAC_OR_BIP (1<<0) /* Output range bipolar */
#define PCI230_DAC_OR_MASK (1<<0)
-/* The following applies only if DAC FIFO support is enabled in the EXTFUNC
- * register (and only for PCI230+ hardware version 2 onwards). */
+/*
+ * The following applies only if DAC FIFO support is enabled in the EXTFUNC
+ * register (and only for PCI230+ hardware version 2 onwards).
+ */
#define PCI230P2_DAC_FIFO_EN (1<<8) /* FIFO enable */
-/* The following apply only if the DAC FIFO is enabled (and only for PCI230+
- * hardware version 2 onwards). */
+/*
+ * The following apply only if the DAC FIFO is enabled (and only for PCI230+
+ * hardware version 2 onwards).
+ */
#define PCI230P2_DAC_TRIG_NONE (0<<2) /* No trigger */
#define PCI230P2_DAC_TRIG_SW (1<<2) /* Software trigger trigger */
#define PCI230P2_DAC_TRIG_EXTP (2<<2) /* EXTTRIG +ve edge trigger */
@@ -274,22 +291,32 @@ for (or detection of) various hardware problems added by Ian Abbott.
#define PCI230P2_DAC_INT_FIFO_FULL (5<<9)
#define PCI230P2_DAC_INT_FIFO_MASK (7<<9)
-/* DACCON read-only values. */
+/*
+ * DACCON read-only values.
+ */
#define PCI230_DAC_BUSY (1<<1) /* DAC busy. */
-/* The following apply only if the DAC FIFO is enabled (and only for PCI230+
- * hardware version 2 onwards). */
+/*
+ * The following apply only if the DAC FIFO is enabled (and only for PCI230+
+ * hardware version 2 onwards).
+ */
#define PCI230P2_DAC_FIFO_UNDERRUN_LATCHED (1<<5) /* Underrun error */
#define PCI230P2_DAC_FIFO_EMPTY (1<<13) /* FIFO empty */
#define PCI230P2_DAC_FIFO_FULL (1<<14) /* FIFO full */
#define PCI230P2_DAC_FIFO_HALF (1<<15) /* FIFO half full */
-/* DACCON write-only, transient values. */
-/* The following apply only if the DAC FIFO is enabled (and only for PCI230+
- * hardware version 2 onwards). */
+/*
+ * DACCON write-only, transient values.
+ */
+/*
+ * The following apply only if the DAC FIFO is enabled (and only for PCI230+
+ * hardware version 2 onwards).
+ */
#define PCI230P2_DAC_FIFO_UNDERRUN_CLEAR (1<<5) /* Clear underrun */
#define PCI230P2_DAC_FIFO_RESET (1<<12) /* FIFO reset */
-/* PCI230+ hardware version 2 DAC FIFO levels. */
+/*
+ * PCI230+ hardware version 2 DAC FIFO levels.
+ */
#define PCI230P2_DAC_FIFOLEVEL_HALF 512
#define PCI230P2_DAC_FIFOLEVEL_FULL 1024
/* Free space in DAC FIFO. */
@@ -299,7 +326,9 @@ for (or detection of) various hardware problems added by Ian Abbott.
#define PCI230P2_DAC_FIFOROOM_HALFTOFULL 1
#define PCI230P2_DAC_FIFOROOM_FULL 0
-/* ADCCON read/write values. */
+/*
+ * ADCCON read/write values.
+ */
#define PCI230_ADC_TRIG_NONE (0<<0) /* No trigger */
#define PCI230_ADC_TRIG_SW (1<<0) /* Software trigger trigger */
#define PCI230_ADC_TRIG_EXTP (2<<0) /* EXTTRIG +ve edge trigger */
@@ -324,31 +353,41 @@ for (or detection of) various hardware problems added by Ian Abbott.
#define PCI230P_ADC_INT_FIFO_THRESH (7<<9) /* FIFO interrupt threshold */
#define PCI230_ADC_INT_FIFO_MASK (7<<9)
-/* ADCCON write-only, transient values. */
+/*
+ * ADCCON write-only, transient values.
+ */
#define PCI230_ADC_FIFO_RESET (1<<12) /* FIFO reset */
#define PCI230_ADC_GLOB_RESET (1<<13) /* Global reset */
-/* ADCCON read-only values. */
+/*
+ * ADCCON read-only values.
+ */
#define PCI230_ADC_BUSY (1<<15) /* ADC busy */
#define PCI230_ADC_FIFO_EMPTY (1<<12) /* FIFO empty */
#define PCI230_ADC_FIFO_FULL (1<<13) /* FIFO full */
#define PCI230_ADC_FIFO_HALF (1<<14) /* FIFO half full */
#define PCI230_ADC_FIFO_FULL_LATCHED (1<<5) /* Indicates overrun occurred */
-/* PCI230 ADC FIFO levels. */
+/*
+ * PCI230 ADC FIFO levels.
+ */
#define PCI230_ADC_FIFOLEVEL_HALFFULL 2049 /* Value for FIFO half full */
#define PCI230_ADC_FIFOLEVEL_FULL 4096 /* FIFO size */
-/* Value to write to ADCSWTRIG to trigger ADC conversion in software trigger
- * mode. Can be anything. */
+/*
+ * Value to write to ADCSWTRIG to trigger ADC conversion in software trigger
+ * mode. Can be anything.
+ */
#define PCI230_ADC_CONV 0xffff
-/* PCI230+ EXTFUNC values. */
+/*
+ * PCI230+ EXTFUNC values.
+ */
+/* Route EXTTRIG pin to external gate inputs. */
#define PCI230P_EXTFUNC_GAT_EXTTRIG (1<<0)
- /* Route EXTTRIG pin to external gate inputs. */
/* PCI230+ hardware version 2 values. */
+/* Allow DAC FIFO to be enabled. */
#define PCI230P2_EXTFUNC_DACFIFO (1<<1)
- /* Allow DAC FIFO to be enabled. */
/*
* Counter/timer clock input configuration sources.
@@ -392,7 +431,9 @@ for (or detection of) various hardware problems added by Ian Abbott.
* Z2-CT2 Z2-CT1-OUT /Z2-CT0-OUT
*/
-/* Interrupt enables/status register values. */
+/*
+ * Interrupt enables/status register values.
+ */
#define PCI230_INT_DISABLE 0
#define PCI230_INT_PPI_C0 (1<<0)
#define PCI230_INT_PPI_C3 (1<<1)
@@ -401,10 +442,12 @@ for (or detection of) various hardware problems added by Ian Abbott.
/* For PCI230+ hardware version 2 when DAC FIFO enabled. */
#define PCI230P2_INT_DAC (1<<4)
+/* Assumes bits numbered with zero offset, ie. 0-15 */
#define PCI230_TEST_BIT(val, n) ((val>>n)&1)
- /* Assumes bits numbered with zero offset, ie. 0-15 */
-/* (Potentially) shared resources and their owners */
+/*
+ * (Potentially) shared resources and their owners
+ */
enum {
RES_Z2CT0, /* Z2-CT0 */
RES_Z2CT1, /* Z2-CT1 */
@@ -491,9 +534,11 @@ static const struct pci230_board pci230_boards[] = {
},
};
-/* this structure is for data unique to this hardware driver. If
- several hardware drivers keep similar information in this structure,
- feel free to suggest moving the variable to the struct comedi_device struct. */
+/*
+ * This structure is for data unique to this hardware driver. If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device struct.
+ */
struct pci230_private {
spinlock_t isr_spinlock; /* Interrupt spin lock */
spinlock_t res_spinlock; /* Shared resources spin lock */
@@ -502,24 +547,24 @@ struct pci230_private {
unsigned long state; /* State flags */
unsigned long iobase1; /* PCI230's I/O space 1 */
unsigned int ao_readback[2]; /* Used for AO readback */
- unsigned int ai_scan_count; /* Number of analogue input scans
- * remaining. */
- unsigned int ai_scan_pos; /* Current position within analogue
- * input scan */
- unsigned int ao_scan_count; /* Number of analogue output scans
- * remaining. */
+ /* Number of analogue input scans remaining. */
+ unsigned int ai_scan_count;
+ /* Current position within analogue input scan */
+ unsigned int ai_scan_pos;
+ /* Number of analogue output scans remaining. */
+ unsigned int ao_scan_count;
int intr_cpuid; /* ID of CPU running interrupt routine. */
unsigned short hwver; /* Hardware version (for '+' models). */
unsigned short adccon; /* ADCCON register value. */
unsigned short daccon; /* DACCON register value. */
- unsigned short adcfifothresh; /* ADC FIFO programmable interrupt
- * level threshold (PCI230+/260+). */
+ /* ADC FIFO programmable interrupt level threshold (PCI230+/260+). */
+ unsigned short adcfifothresh;
unsigned short adcg; /* ADCG register value. */
unsigned char int_en; /* Interrupt enables bits. */
- unsigned char ai_bipolar; /* Set if bipolar input range so we
- * know to mangle it. */
- unsigned char ao_bipolar; /* Set if bipolar output range so we
- * know to mangle it. */
+ /* Set if bipolar input range so we know to mangle it. */
+ unsigned char ai_bipolar;
+ /* Set if bipolar output range so we know to mangle it. */
+ unsigned char ao_bipolar;
unsigned char ier; /* Copy of interrupt enables/status register. */
unsigned char intr_running; /* Flag set in interrupt routine. */
unsigned char res_owner[NUM_RESOURCES]; /* Shared resource owners. */
@@ -572,13 +617,16 @@ static unsigned short pci230_ai_read(struct comedi_device *dev)
/* Read sample. */
data = inw(dev->iobase + PCI230_ADCDATA);
- /* PCI230 is 12 bit - stored in upper bits of 16 bit register (lower
- * four bits reserved for expansion). */
- /* PCI230+ is 16 bit AI. */
+ /*
+ * PCI230 is 12 bit - stored in upper bits of 16 bit register
+ * (lower four bits reserved for expansion). PCI230+ is 16 bit AI.
+ */
data = data >> (16 - thisboard->ai_bits);
- /* If a bipolar range was specified, mangle it (twos
- * complement->straight binary). */
+ /*
+ * If a bipolar range was specified, mangle it
+ * (twos complement->straight binary).
+ */
if (devpriv->ai_bipolar)
data ^= 1 << (thisboard->ai_bits - 1);
@@ -591,14 +639,17 @@ static inline unsigned short pci230_ao_mangle_datum(struct comedi_device *dev,
const struct pci230_board *thisboard = comedi_board(dev);
struct pci230_private *devpriv = dev->private;
- /* If a bipolar range was specified, mangle it (straight binary->twos
- * complement). */
+ /*
+ * If a bipolar range was specified, mangle it
+ * (straight binary->twos complement).
+ */
if (devpriv->ao_bipolar)
datum ^= 1 << (thisboard->ao_bits - 1);
- /* PCI230 is 12 bit - stored in upper bits of 16 bit register (lower
- * four bits reserved for expansion). */
- /* PCI230+ is also 12 bit AO. */
+ /*
+ * PCI230 is 12 bit - stored in upper bits of 16 bit register (lower
+ * four bits reserved for expansion). PCI230+ is also 12 bit AO.
+ */
datum <<= (16 - thisboard->ao_bits);
return datum;
}
@@ -730,8 +781,10 @@ static unsigned int divide_ns(uint64_t ns, unsigned int timebase,
return div > UINT_MAX ? UINT_MAX : (unsigned int)div;
}
-/* Given desired period in ns, returns the required internal clock source
- * and gets the initial count. */
+/*
+ * Given desired period in ns, returns the required internal clock source
+ * and gets the initial count.
+ */
static unsigned int pci230_choose_clk_count(uint64_t ns, unsigned int *count,
unsigned int flags)
{
@@ -824,7 +877,8 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
}
}
- /* Use Z2-CT2 as a conversion trigger instead of the built-in
+ /*
+ * Use Z2-CT2 as a conversion trigger instead of the built-in
* software trigger, as otherwise triggering of differential channels
* doesn't work properly for some versions of PCI230/260. Also set
* FIFO mode because the ADC busy bit only works for software triggers.
@@ -837,12 +891,16 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
/* Differential. */
gainshift = chan * 2;
if (devpriv->hwver == 0) {
- /* Original PCI230/260 expects both inputs of the
- * differential channel to be enabled. */
+ /*
+ * Original PCI230/260 expects both inputs of the
+ * differential channel to be enabled.
+ */
adcen = 3 << gainshift;
} else {
- /* PCI230+/260+ expects only one input of the
- * differential channel to be enabled. */
+ /*
+ * PCI230+/260+ expects only one input of the
+ * differential channel to be enabled.
+ */
adcen = 1 << gainshift;
}
adccon |= PCI230_ADC_IM_DIF;
@@ -860,8 +918,10 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
adccon |= PCI230_ADC_IR_UNI;
- /* Enable only this channel in the scan list - otherwise by default
- * we'll get one sample from each channel. */
+ /*
+ * Enable only this channel in the scan list - otherwise by default
+ * we'll get one sample from each channel.
+ */
outw(adcen, dev->iobase + PCI230_ADCEN);
/* Set gain for channel. */
@@ -873,8 +933,10 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
/* Convert n samples */
for (n = 0; n < insn->n; n++) {
- /* Trigger conversion by toggling Z2-CT2 output (finish with
- * output high). */
+ /*
+ * Trigger conversion by toggling Z2-CT2 output
+ * (finish with output high).
+ */
i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2,
I8254_MODE0);
i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2,
@@ -908,13 +970,17 @@ static int pci230_ao_winsn(struct comedi_device *dev,
chan = CR_CHAN(insn->chanspec);
range = CR_RANGE(insn->chanspec);
- /* Set range - see analogue output range table; 0 => unipolar 10V,
- * 1 => bipolar +/-10V range scale */
+ /*
+ * Set range - see analogue output range table; 0 => unipolar 10V,
+ * 1 => bipolar +/-10V range scale
+ */
devpriv->ao_bipolar = pci230_ao_bipolar[range];
outw(range, dev->iobase + PCI230_DACCON);
- /* Writing a list of values to an AO channel is probably not
- * very useful, but that's how the interface is defined. */
+ /*
+ * Writing a list of values to an AO channel is probably not
+ * very useful, but that's how the interface is defined.
+ */
for (i = 0; i < insn->n; i++) {
/* Write value to DAC and store it. */
pci230_ao_write_nofifo(dev, data[i], chan);
@@ -924,8 +990,10 @@ static int pci230_ao_winsn(struct comedi_device *dev,
return i;
}
-/* AO subdevices should have a read insn as well as a write insn.
- * Usually this means copying a value stored in devpriv. */
+/*
+ * AO subdevices should have a read insn as well as a write insn.
+ * Usually this means copying a value stored in devpriv.
+ */
static int pci230_ao_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data)
@@ -1026,10 +1094,11 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
#define MAX_SPEED_AO 8000 /* 8000 ns => 125 kHz */
+/*
+ * Comedi limit due to unsigned int cmd. Driver limit =
+ * 2^16 (16bit * counter) * 1000000ns (1kHz onboard clock) = 65.536s
+ */
#define MIN_SPEED_AO 4294967295u /* 4294967295ns = 4.29s */
- /*- Comedi limit due to unsigned int cmd. Driver limit
- * = 2^16 (16bit * counter) * 1000000ns (1kHz onboard
- * clock) = 65.536s */
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
@@ -1039,15 +1108,19 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
MIN_SPEED_AO);
break;
case TRIG_EXT:
- /* External trigger - for PCI230+ hardware version 2 onwards. */
+ /*
+ * External trigger - for PCI230+ hardware version 2 onwards.
+ */
/* Trigger number must be 0. */
if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
~CR_FLAGS_MASK);
err |= -EINVAL;
}
- /* The only flags allowed are CR_EDGE and CR_INVERT. The
- * CR_EDGE flag is ignored. */
+ /*
+ * The only flags allowed are CR_EDGE and CR_INVERT.
+ * The CR_EDGE flag is ignored.
+ */
if ((cmd->scan_begin_arg
& (CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT))) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
@@ -1069,9 +1142,7 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
if (err)
return 3;
- /* Step 4: fix up any arguments.
- * "argument conflict" returned by comedilib to user mode process
- * if this fails. */
+ /* Step 4: fix up any arguments */
if (cmd->scan_begin_src == TRIG_TIMER) {
tmp = cmd->scan_begin_arg;
@@ -1120,8 +1191,10 @@ static void pci230_ao_stop(struct comedi_device *dev,
/* Using DAC FIFO interrupt. */
intsrc = PCI230P2_INT_DAC;
}
- /* Disable interrupt and wait for interrupt routine to finish running
- * unless we are called from the interrupt routine. */
+ /*
+ * Disable interrupt and wait for interrupt routine to finish running
+ * unless we are called from the interrupt routine.
+ */
spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
devpriv->int_en &= ~intsrc;
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
@@ -1134,8 +1207,10 @@ static void pci230_ao_stop(struct comedi_device *dev,
}
spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
if (devpriv->hwver >= 2) {
- /* Using DAC FIFO. Reset FIFO, clear underrun error,
- * disable FIFO. */
+ /*
+ * Using DAC FIFO. Reset FIFO, clear underrun error,
+ * disable FIFO.
+ */
devpriv->daccon &= PCI230_DAC_OR_MASK;
outw(devpriv->daccon | PCI230P2_DAC_FIFO_RESET
| PCI230P2_DAC_FIFO_UNDERRUN_CLEAR,
@@ -1213,9 +1288,11 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
dev_err(dev->class_dev, "AO FIFO underrun\n");
events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
}
- /* Check for buffer underrun if FIFO less than half full
+ /*
+ * Check for buffer underrun if FIFO less than half full
* (otherwise there will be loads of "DAC FIFO not half full"
- * interrupts). */
+ * interrupts).
+ */
if ((num_scans == 0)
&& ((dacstat & PCI230P2_DAC_FIFO_HALF) == 0)) {
dev_err(dev->class_dev, "AO buffer underrun\n");
@@ -1251,9 +1328,11 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
if (cmd->stop_src == TRIG_COUNT) {
devpriv->ao_scan_count -= num_scans;
if (devpriv->ao_scan_count == 0) {
- /* All data for the command has been written
+ /*
+ * All data for the command has been written
* to FIFO. Set FIFO interrupt trigger level
- * to 'empty'. */
+ * to 'empty'.
+ */
devpriv->daccon = (devpriv->daccon
&
~PCI230P2_DAC_INT_FIFO_MASK)
@@ -1444,8 +1523,10 @@ static int pci230_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
else /* TRIG_NONE, user calls cancel */
devpriv->ao_scan_count = 0;
- /* Set range - see analogue output range table; 0 => unipolar 10V,
- * 1 => bipolar +/-10V range scale */
+ /*
+ * Set range - see analogue output range table; 0 => unipolar 10V,
+ * 1 => bipolar +/-10V range scale
+ */
range = CR_RANGE(cmd->chanlist[0]);
devpriv->ao_bipolar = pci230_ao_bipolar[range];
daccon = devpriv->ao_bipolar ? PCI230_DAC_OR_BIP : PCI230_DAC_OR_UNI;
@@ -1480,9 +1561,11 @@ static int pci230_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
& ~(PCI230P2_DAC_FIFO_RESET | PCI230P2_DAC_FIFO_UNDERRUN_CLEAR);
if (cmd->scan_begin_src == TRIG_TIMER) {
- /* Set the counter timer 1 to the specified scan frequency. */
- /* cmd->scan_begin_arg is sampling period in ns */
- /* gate it off for now. */
+ /*
+ * Set the counter timer 1 to the specified scan frequency.
+ * cmd->scan_begin_arg is sampling period in ns.
+ * Gate it off for now.
+ */
outb(GAT_CONFIG(1, GAT_GND),
devpriv->iobase1 + PCI230_ZGAT_SCE);
pci230_ct_setup_ns_mode(dev, 1, I8254_MODE3,
@@ -1688,17 +1771,20 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
#define MAX_SPEED_AI_SE 3200 /* PCI230 SE: 3200 ns => 312.5 kHz */
#define MAX_SPEED_AI_DIFF 8000 /* PCI230 DIFF: 8000 ns => 125 kHz */
#define MAX_SPEED_AI_PLUS 4000 /* PCI230+: 4000 ns => 250 kHz */
+/*
+ * Comedi limit due to unsigned int cmd. Driver limit =
+ * 2^16 (16bit * counter) * 1000000ns (1kHz onboard clock) = 65.536s
+ */
#define MIN_SPEED_AI 4294967295u /* 4294967295ns = 4.29s */
- /*- Comedi limit due to unsigned int cmd. Driver limit
- * = 2^16 (16bit * counter) * 1000000ns (1kHz onboard
- * clock) = 65.536s */
if (cmd->convert_src == TRIG_TIMER) {
unsigned int max_speed_ai;
if (devpriv->hwver == 0) {
- /* PCI230 or PCI260. Max speed depends whether
- * single-ended or pseudo-differential. */
+ /*
+ * PCI230 or PCI260. Max speed depends whether
+ * single-ended or pseudo-differential.
+ */
if (cmd->chanlist && (cmd->chanlist_len > 0)) {
/* Peek analogue reference of first channel. */
if (CR_AREF(cmd->chanlist[0]) == AREF_DIFF)
@@ -1735,8 +1821,10 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
~CR_FLAGS_MASK);
err |= -EINVAL;
}
- /* The only flags allowed are CR_INVERT and CR_EDGE.
- * CR_EDGE is required. */
+ /*
+ * The only flags allowed are CR_INVERT and CR_EDGE.
+ * CR_EDGE is required.
+ */
if ((cmd->convert_arg & (CR_FLAGS_MASK & ~CR_INVERT))
!= CR_EDGE) {
/* Set CR_EDGE, preserve CR_INVERT. */
@@ -1747,9 +1835,11 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= -EINVAL;
}
} else {
- /* Backwards compatibility with previous versions. */
- /* convert_arg == 0 => trigger on -ve edge. */
- /* convert_arg == 1 => trigger on +ve edge. */
+ /*
+ * Backwards compatibility with previous versions:
+ * convert_arg == 0 => trigger on -ve edge.
+ * convert_arg == 1 => trigger on +ve edge.
+ */
err |= cfc_check_trigger_arg_max(&cmd->convert_arg, 1);
}
} else {
@@ -1762,9 +1852,11 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (cmd->scan_begin_src == TRIG_EXT) {
- /* external "trigger" to begin each scan
+ /*
+ * external "trigger" to begin each scan:
* scan_begin_arg==0 => use PPC0 input -> gate of CT0 -> gate
- * of CT2 (sample convert trigger is CT2) */
+ * of CT2 (sample convert trigger is CT2)
+ */
if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
~CR_FLAGS_MASK);
@@ -1788,9 +1880,7 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
if (err)
return 3;
- /* Step 4: fix up any arguments.
- * "argument conflict" returned by comedilib to user mode process
- * if this fails. */
+ /* Step 4: fix up any arguments */
if (cmd->convert_src == TRIG_TIMER) {
tmp = cmd->convert_arg;
@@ -1884,17 +1974,21 @@ static int pci230_ai_inttrig_convert(struct comedi_device *dev,
if (test_bit(AI_CMD_STARTED, &devpriv->state)) {
unsigned int delayus;
- /* Trigger conversion by toggling Z2-CT2 output. Finish
- * with output high. */
+ /*
+ * Trigger conversion by toggling Z2-CT2 output.
+ * Finish with output high.
+ */
i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2,
I8254_MODE0);
i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2,
I8254_MODE1);
- /* Delay. Should driver be responsible for this? An
+ /*
+ * Delay. Should driver be responsible for this? An
* alternative would be to wait until conversion is complete,
* but we can't tell when it's complete because the ADC busy
* bit has a different meaning when FIFO enabled (and when
- * FIFO not enabled, it only works for software triggers). */
+ * FIFO not enabled, it only works for software triggers).
+ */
if (((devpriv->adccon & PCI230_ADC_IM_MASK)
== PCI230_ADC_IM_DIF)
&& (devpriv->hwver == 0)) {
@@ -1960,8 +2054,10 @@ static void pci230_ai_stop(struct comedi_device *dev,
pci230_cancel_ct(dev, 0);
}
spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
- /* Disable ADC interrupt and wait for interrupt routine to finish
- * running unless we are called from the interrupt routine. */
+ /*
+ * Disable ADC interrupt and wait for interrupt routine to finish
+ * running unless we are called from the interrupt routine.
+ */
devpriv->int_en &= ~PCI230_INT_ADC;
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
@@ -1972,8 +2068,10 @@ static void pci230_ai_stop(struct comedi_device *dev,
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
}
spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
- /* Reset FIFO, disable FIFO and set start conversion source to none.
- * Keep se/diff and bip/uni settings */
+ /*
+ * Reset FIFO, disable FIFO and set start conversion source to none.
+ * Keep se/diff and bip/uni settings.
+ */
devpriv->adccon = (devpriv->adccon & (PCI230_ADC_IR_MASK
| PCI230_ADC_IM_MASK)) |
PCI230_ADC_TRIG_NONE;
@@ -2006,8 +2104,10 @@ static void pci230_ai_start(struct comedi_device *dev,
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
- /* Update conversion trigger source which is currently set
- * to CT2 output, which is currently stuck high. */
+ /*
+ * Update conversion trigger source which is currently set
+ * to CT2 output, which is currently stuck high.
+ */
switch (cmd->convert_src) {
default:
conv = PCI230_ADC_TRIG_NONE;
@@ -2037,8 +2137,10 @@ static void pci230_ai_start(struct comedi_device *dev,
}
break;
case TRIG_INT:
- /* Use CT2 output for software trigger due to problems
- * in differential mode on PCI230/260. */
+ /*
+ * Use CT2 output for software trigger due to problems
+ * in differential mode on PCI230/260.
+ */
conv = PCI230_ADC_TRIG_Z2CT2;
break;
}
@@ -2048,20 +2150,26 @@ static void pci230_ai_start(struct comedi_device *dev,
if (cmd->convert_src == TRIG_INT)
async->inttrig = pci230_ai_inttrig_convert;
- /* Update FIFO interrupt trigger level, which is currently
- * set to "full". */
+ /*
+ * Update FIFO interrupt trigger level, which is currently
+ * set to "full".
+ */
pci230_ai_update_fifo_trigger_level(dev, s);
if (cmd->convert_src == TRIG_TIMER) {
/* Update timer gates. */
unsigned char zgat;
if (cmd->scan_begin_src != TRIG_FOLLOW) {
- /* Conversion timer CT2 needs to be gated by
- * inverted output of monostable CT2. */
+ /*
+ * Conversion timer CT2 needs to be gated by
+ * inverted output of monostable CT2.
+ */
zgat = GAT_CONFIG(2, GAT_NOUTNM2);
} else {
- /* Conversion timer CT2 needs to be gated on
- * continuously. */
+ /*
+ * Conversion timer CT2 needs to be gated on
+ * continuously.
+ */
zgat = GAT_CONFIG(2, GAT_VCC);
}
outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
@@ -2103,8 +2211,10 @@ static void pci230_ai_start(struct comedi_device *dev,
outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
- /* Scan period timer CT1 needs to be
- * gated on to start counting. */
+ /*
+ * Scan period timer CT1 needs to be
+ * gated on to start counting.
+ */
zgat = GAT_CONFIG(1, GAT_VCC);
outb(zgat, devpriv->iobase1
+ PCI230_ZGAT_SCE);
@@ -2172,8 +2282,10 @@ static void pci230_handle_ai(struct comedi_device *dev,
/* Read FIFO state. */
status_fifo = inw(dev->iobase + PCI230_ADCCON);
if ((status_fifo & PCI230_ADC_FIFO_FULL_LATCHED) != 0) {
- /* Report error otherwise FIFO overruns will go
- * unnoticed by the caller. */
+ /*
+ * Report error otherwise FIFO overruns will go
+ * unnoticed by the caller.
+ */
dev_err(dev->class_dev, "AI FIFO overrun\n");
events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
break;
@@ -2247,8 +2359,10 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
* Determine which shared resources are needed.
*/
res_mask = 0;
- /* Need Z2-CT2 to supply a conversion trigger source at a high
- * logic level, even if not doing timed conversions. */
+ /*
+ * Need Z2-CT2 to supply a conversion trigger source at a high
+ * logic level, even if not doing timed conversions.
+ */
res_mask |= (1U << RES_Z2CT2);
if (cmd->scan_begin_src != TRIG_FOLLOW) {
/* Using Z2-CT0 monostable to gate Z2-CT2 conversion timer */
@@ -2270,7 +2384,8 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->ai_scan_count = 0;
devpriv->ai_scan_pos = 0; /* Position within scan. */
- /* Steps;
+ /*
+ * Steps:
* - Set channel scan list.
* - Set channel gains.
* - Enable and reset FIFO, specify uni/bip, se/diff, and set
@@ -2315,12 +2430,16 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (diff) {
gainshift = 2 * chan;
if (devpriv->hwver == 0) {
- /* Original PCI230/260 expects both inputs of
- * the differential channel to be enabled. */
+ /*
+ * Original PCI230/260 expects both inputs of
+ * the differential channel to be enabled.
+ */
adcen |= 3 << gainshift;
} else {
- /* PCI230+/260+ expects only one input of the
- * differential channel to be enabled. */
+ /*
+ * PCI230+/260+ expects only one input of the
+ * differential channel to be enabled.
+ */
adcen |= 1 << gainshift;
}
} else {
@@ -2337,38 +2456,48 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* Set channel gains. */
outw(devpriv->adcg, dev->iobase + PCI230_ADCG);
- /* Set counter/timer 2 output high for use as the initial start
- * conversion source. */
+ /*
+ * Set counter/timer 2 output high for use as the initial start
+ * conversion source.
+ */
i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2, I8254_MODE1);
- /* Temporarily use CT2 output as conversion trigger source and
- * temporarily set FIFO interrupt trigger level to 'full'. */
+ /*
+ * Temporarily use CT2 output as conversion trigger source and
+ * temporarily set FIFO interrupt trigger level to 'full'.
+ */
adccon |= PCI230_ADC_INT_FIFO_FULL | PCI230_ADC_TRIG_Z2CT2;
- /* Enable and reset FIFO, specify FIFO trigger level full, specify
+ /*
+ * Enable and reset FIFO, specify FIFO trigger level full, specify
* uni/bip, se/diff, and temporarily set the start conversion source
* to CT2 output. Note that CT2 output is currently high, and this
* will produce a false conversion trigger on some versions of the
- * PCI230/260, but that will be dealt with later. */
+ * PCI230/260, but that will be dealt with later.
+ */
devpriv->adccon = adccon;
outw(adccon | PCI230_ADC_FIFO_RESET, dev->iobase + PCI230_ADCCON);
- /* Delay */
- /* Failure to include this will result in the first few channels'-worth
+ /*
+ * Delay -
+ * Failure to include this will result in the first few channels'-worth
* of data being corrupt, normally manifesting itself by large negative
* voltages. It seems the board needs time to settle between the first
* FIFO reset (above) and the second FIFO reset (below). Setting the
* channel gains and scan list _before_ the first FIFO reset also
- * helps, though only slightly. */
+ * helps, though only slightly.
+ */
udelay(25);
/* Reset FIFO again. */
outw(adccon | PCI230_ADC_FIFO_RESET, dev->iobase + PCI230_ADCCON);
if (cmd->convert_src == TRIG_TIMER) {
- /* Set up CT2 as conversion timer, but gate it off for now.
+ /*
+ * Set up CT2 as conversion timer, but gate it off for now.
* Note, counter/timer output 2 can be monitored on the
- * connector: PCI230 pin 21, PCI260 pin 18. */
+ * connector: PCI230 pin 21, PCI260 pin 18.
+ */
zgat = GAT_CONFIG(2, GAT_GND);
outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
/* Set counter/timer 2 to the specified conversion period. */
@@ -2442,9 +2571,11 @@ static irqreturn_t pci230_interrupt(int irq, void *d)
spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
valid_status_int = devpriv->int_en & status_int;
- /* Disable triggered interrupts.
+ /*
+ * Disable triggered interrupts.
* (Only those interrupts that need re-enabling, are, later in the
- * handler). */
+ * handler).
+ */
devpriv->ier = devpriv->int_en & ~status_int;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
devpriv->intr_running = 1;
@@ -2501,8 +2632,10 @@ static bool pci230_match_pci_board(const struct pci230_board *board,
/* Looking for a '+' model. First check length of registers. */
if (pci_resource_len(pci_dev, 3) < 32)
return false; /* Not a '+' model. */
- /* TODO: temporarily enable PCI device and read the hardware version
- * register. For now, assume it's okay. */
+ /*
+ * TODO: temporarily enable PCI device and read the hardware version
+ * register. For now, assume it's okay.
+ */
return true;
}
@@ -2591,8 +2724,10 @@ static int pci230_attach_common(struct comedi_device *dev,
if (rc)
return rc;
- /* Read base addresses of the PCI230's two I/O regions from PCI
- * configuration register. */
+ /*
+ * Read base addresses of the PCI230's two I/O regions from PCI
+ * configuration register.
+ */
iobase1 = pci_resource_start(pci_dev, 2);
iobase2 = pci_resource_start(pci_dev, 3);
dev_dbg(dev->class_dev,
@@ -2602,8 +2737,10 @@ static int pci230_attach_common(struct comedi_device *dev,
dev->iobase = iobase2;
/* Read bits of DACCON register - only the output range. */
devpriv->daccon = inw(dev->iobase + PCI230_DACCON) & PCI230_DAC_OR_MASK;
- /* Read hardware version register and set extended function register
- * if they exist. */
+ /*
+ * Read hardware version register and set extended function register
+ * if they exist.
+ */
if (pci_resource_len(pci_dev, 3) >= 32) {
unsigned short extfunc = 0;
@@ -2617,11 +2754,13 @@ static int pci230_attach_common(struct comedi_device *dev,
}
if (devpriv->hwver > 0) {
if (!thisboard->have_dio) {
- /* No DIO ports. Route counters' external gates
+ /*
+ * No DIO ports. Route counters' external gates
* to the EXTTRIG signal (PCI260+ pin 17).
* (Otherwise, they would be routed to DIO
* inputs PC0, PC1 and PC2 which don't exist
- * on PCI260[+].) */
+ * on PCI260[+].)
+ */
extfunc |= PCI230P_EXTFUNC_GAT_EXTTRIG;
}
if ((thisboard->ao_chans > 0)
@@ -2632,8 +2771,10 @@ static int pci230_attach_common(struct comedi_device *dev,
}
outw(extfunc, dev->iobase + PCI230P_EXTFUNC);
if ((extfunc & PCI230P2_EXTFUNC_DACFIFO) != 0) {
- /* Temporarily enable DAC FIFO, reset it and disable
- * FIFO wraparound. */
+ /*
+ * Temporarily enable DAC FIFO, reset it and disable
+ * FIFO wraparound.
+ */
outw(devpriv->daccon | PCI230P2_DAC_FIFO_EN
| PCI230P2_DAC_FIFO_RESET,
dev->iobase + PCI230_DACCON);
--
2.0.0
More information about the devel
mailing list