[PATCH v4 (staging-next) 2/5] staging:iio:hmc5843: Split hmc5843.c to multiple files
Jonathan Cameron
jic23 at kernel.org
Sun Jul 20 16:32:20 UTC 2014
On 16/07/14 14:07, Josef Gajdusek wrote:
> This patch splits hmc5843.c to multiple files - the interface-agnostic
> hmc5843_core.c, i2c specific hmc5843_i2c.c and header file hmc5843.h. This is
> another step to add support of SPI-enabled hmc5983.
>
> Signed-off-by: Josef Gajdusek <atx at atx.name>
Unfortunately taking the tables non static just causes sparse to complain:
drivers/staging/iio/magnetometer/hmc5843.h:62:28: warning: symbol 'hmc5843_readable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:71:28: warning: symbol 'hmc5843_writable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:80:28: warning: symbol 'hmc5843_volatile_table' was not declared. Should it be static?
CC [M] drivers/staging/iio/magnetometer/hmc5843_core.o
CHECK drivers/staging/iio/magnetometer/hmc5843_i2c.c
drivers/staging/iio/magnetometer/hmc5843.h:62:28: warning: symbol 'hmc5843_readable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:71:28: warning: symbol 'hmc5843_writable_table' was not declared. Should it be static?
drivers/staging/iio/magnetometer/hmc5843.h:80:28: warning: symbol 'hmc5843_volatile_table' was not declared. Should it be static?
CC [M] drivers/staging/iio/magnetometer/hmc5843_i2c.o
I think you'll probably just have to duplicate them (which is irritating, but there we are).
Jonathan
> ---
> drivers/staging/iio/magnetometer/Kconfig | 14 +-
> drivers/staging/iio/magnetometer/Makefile | 3 +-
> drivers/staging/iio/magnetometer/hmc5843.h | 85 ++++++++++++
> .../iio/magnetometer/{hmc5843.c => hmc5843_core.c} | 154 +++++----------------
> drivers/staging/iio/magnetometer/hmc5843_i2c.c | 75 ++++++++++
> 5 files changed, 203 insertions(+), 128 deletions(-)
> create mode 100644 drivers/staging/iio/magnetometer/hmc5843.h
> rename drivers/staging/iio/magnetometer/{hmc5843.c => hmc5843_core.c} (79%)
> create mode 100644 drivers/staging/iio/magnetometer/hmc5843_i2c.c
>
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index ad88d61..0a27f98 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -4,16 +4,22 @@
> menu "Magnetometer sensors"
>
> config SENSORS_HMC5843
> - tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
> - depends on I2C
> + tristate
> select IIO_BUFFER
> select IIO_TRIGGERED_BUFFER
> +
> +config SENSORS_HMC5843_I2C
> + tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
> + depends on I2C
> + select SENSORS_HMC5843
> select REGMAP_I2C
> help
> Say Y here to add support for the Honeywell HMC5843, HMC5883 and
> HMC5883L 3-Axis Magnetometer (digital compass).
>
> - To compile this driver as a module, choose M here: the module
> - will be called hmc5843.
> + This driver can also be compiled as a set of modules.
> + If so, these modules will be created:
> + - hmc5843_core (core functions)
> + - hmc5843_i2c (support for HMC5843, HMC5883 and HMC5883L)
>
> endmenu
> diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
> index f9bfb2e..65baf1c 100644
> --- a/drivers/staging/iio/magnetometer/Makefile
> +++ b/drivers/staging/iio/magnetometer/Makefile
> @@ -2,4 +2,5 @@
> # Makefile for industrial I/O Magnetometer sensors
> #
>
> -obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
> +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
> +obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.h b/drivers/staging/iio/magnetometer/hmc5843.h
> new file mode 100644
> index 0000000..0d9b02e
> --- /dev/null
> +++ b/drivers/staging/iio/magnetometer/hmc5843.h
> @@ -0,0 +1,85 @@
> +/*
> + * Header file for hmc5843 driver
> + *
> + * Split from hmc5843.c
> + * Copyright (C) Josef Gajdusek <atx at atx.name>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * */
> +
> +
> +#ifndef HMC5843_CORE_H
> +#define HMC5843_CORE_H
> +
> +#include <linux/regmap.h>
> +#include <linux/iio/iio.h>
> +
> +#define HMC5843_CONFIG_REG_A 0x00
> +#define HMC5843_CONFIG_REG_B 0x01
> +#define HMC5843_MODE_REG 0x02
> +#define HMC5843_DATA_OUT_MSB_REGS 0x03
> +#define HMC5843_STATUS_REG 0x09
> +#define HMC5843_ID_REG 0x0a
> +#define HMC5843_ID_END 0x0c
> +
> +enum hmc5843_ids {
> + HMC5843_ID,
> + HMC5883_ID,
> + HMC5883L_ID,
> +};
> +
> +struct hmc5843_data {
> + struct device *dev;
> + struct mutex lock;
> + struct regmap *regmap;
> + const struct hmc5843_chip_info *variant;
> + __be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
> +};
> +
> +int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
> + enum hmc5843_ids id);
> +int hmc5843_common_remove(struct device *dev);
> +
> +int hmc5843_common_suspend(struct device *dev);
> +int hmc5843_common_resume(struct device *dev);
> +
> +#ifdef CONFIG_PM_SLEEP
> +static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
> + hmc5843_common_suspend,
> + hmc5843_common_resume);
> +#define HMC5843_PM_OPS (&hmc5843_pm_ops)
> +#else
> +#define HMC5843_PM_OPS NULL
> +#endif
> +
> +static const struct regmap_range hmc5843_readable_ranges[] = {
> + regmap_reg_range(0, HMC5843_ID_END),
> +};
> +
> +struct regmap_access_table hmc5843_readable_table = {
> + .yes_ranges = hmc5843_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
> +};
> +
> +static const struct regmap_range hmc5843_writable_ranges[] = {
> + regmap_reg_range(0, HMC5843_MODE_REG),
> +};
> +
> +struct regmap_access_table hmc5843_writable_table = {
> + .yes_ranges = hmc5843_writable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
> +};
> +
> +static const struct regmap_range hmc5843_volatile_ranges[] = {
> + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
> +};
> +
> +struct regmap_access_table hmc5843_volatile_table = {
> + .yes_ranges = hmc5843_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
> +};
> +
> +#endif /* HMC5843_CORE_H */
> diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
> similarity index 79%
> rename from drivers/staging/iio/magnetometer/hmc5843.c
> rename to drivers/staging/iio/magnetometer/hmc5843_core.c
> index 6f06f98..bdeaf43 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
> @@ -4,6 +4,8 @@
>
> Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw at pmeerw.net>.
>
> + Split to multiple files by Josef Gajdusek <atx at atx.name> - 2014
> +
> This program is free software; you can redistribute it and/or modify
> it under the terms of the GNU General Public License as published by
> the Free Software Foundation; either version 2 of the License, or
> @@ -20,7 +22,6 @@
> */
>
> #include <linux/module.h>
> -#include <linux/i2c.h>
> #include <linux/regmap.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -29,19 +30,7 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/delay.h>
>
> -#define HMC5843_CONFIG_REG_A 0x00
> -#define HMC5843_CONFIG_REG_B 0x01
> -#define HMC5843_MODE_REG 0x02
> -#define HMC5843_DATA_OUT_MSB_REGS 0x03
> -#define HMC5843_STATUS_REG 0x09
> -#define HMC5843_ID_REG 0x0a
> -#define HMC5843_ID_END 0x0c
> -
> -enum hmc5843_ids {
> - HMC5843_ID,
> - HMC5883_ID,
> - HMC5883L_ID,
> -};
> +#include "hmc5843.h"
>
> /*
> * Range gain settings in (+-)Ga
> @@ -121,15 +110,6 @@ struct hmc5843_chip_info {
> const int *regval_to_nanoscale;
> };
>
> -/* Each client has this additional data */
> -struct hmc5843_data {
> - struct i2c_client *client;
> - struct mutex lock;
> - struct regmap *regmap;
> - const struct hmc5843_chip_info *variant;
> - __be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
> -};
> -
> /* The lower two bits contain the current conversion mode */
> static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
> {
> @@ -159,7 +139,7 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data)
> }
>
> if (tries < 0) {
> - dev_err(&data->client->dev, "data not ready\n");
> + dev_err(data->dev, "data not ready\n");
> return -EIO;
> }
>
> @@ -524,7 +504,7 @@ static int hmc5843_init(struct hmc5843_data *data)
> if (ret < 0)
> return ret;
> if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
> - dev_err(&data->client->dev, "no HMC5843/5883/5883L sensor\n");
> + dev_err(data->dev, "no HMC5843/5883/5883L sensor\n");
> return -ENODEV;
> }
>
> @@ -550,66 +530,43 @@ static const struct iio_info hmc5843_info = {
>
> static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
>
> -static const struct regmap_range hmc5843_readable_ranges[] = {
> - regmap_reg_range(0, HMC5843_ID_END),
> -};
> -
> -static struct regmap_access_table hmc5843_readable_table = {
> - .yes_ranges = hmc5843_readable_ranges,
> - .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
> -};
>
> -static const struct regmap_range hmc5843_writable_ranges[] = {
> - regmap_reg_range(0, HMC5843_MODE_REG),
> -};
> -
> -static struct regmap_access_table hmc5843_writable_table = {
> - .yes_ranges = hmc5843_writable_ranges,
> - .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
> -};
> -
> -static const struct regmap_range hmc5843_volatile_ranges[] = {
> - regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
> -};
> -
> -static struct regmap_access_table hmc5843_volatile_table = {
> - .yes_ranges = hmc5843_volatile_ranges,
> - .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
> -};
> -
> -static struct regmap_config hmc5843_regmap_config = {
> - .reg_bits = 8,
> - .val_bits = 8,
> -
> - .rd_table = &hmc5843_readable_table,
> - .wr_table = &hmc5843_writable_table,
> - .volatile_table = &hmc5843_volatile_table,
> +int hmc5843_common_suspend(struct device *dev)
> +{
> + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
> + HMC5843_MODE_CONVERSION_CONTINUOUS);
> +}
> +EXPORT_SYMBOL(hmc5843_common_suspend);
>
> - .cache_type = REGCACHE_RBTREE,
> -};
> +int hmc5843_common_resume(struct device *dev)
> +{
> + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
> + HMC5843_MODE_SLEEP);
> +}
> +EXPORT_SYMBOL(hmc5843_common_resume);
>
> -static int hmc5843_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
> + enum hmc5843_ids id)
> {
> struct hmc5843_data *data;
> struct iio_dev *indio_dev;
> int ret;
>
> - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> if (indio_dev == NULL)
> return -ENOMEM;
>
> + dev_set_drvdata(dev, indio_dev);
> +
> /* default settings at probe */
> data = iio_priv(indio_dev);
> - data->client = client;
> - data->variant = &hmc5843_chip_info_tbl[id->driver_data];
> - data->regmap = devm_regmap_init_i2c(client, &hmc5843_regmap_config);
> + data->dev = dev;
> + data->regmap = regmap;
> + data->variant = &hmc5843_chip_info_tbl[id];
> mutex_init(&data->lock);
>
> - i2c_set_clientdata(client, indio_dev);
> + indio_dev->dev.parent = dev;
> indio_dev->info = &hmc5843_info;
> - indio_dev->name = id->name;
> - indio_dev->dev.parent = &client->dev;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = data->variant->channels;
> indio_dev->num_channels = 4;
> @@ -634,10 +591,11 @@ buffer_cleanup:
> iio_triggered_buffer_cleanup(indio_dev);
> return ret;
> }
> +EXPORT_SYMBOL(hmc5843_common_probe);
>
> -static int hmc5843_remove(struct i2c_client *client)
> +int hmc5843_common_remove(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
>
> iio_device_unregister(indio_dev);
> iio_triggered_buffer_cleanup(indio_dev);
> @@ -647,58 +605,8 @@ static int hmc5843_remove(struct i2c_client *client)
>
> return 0;
> }
> -
> -#ifdef CONFIG_PM_SLEEP
> -static int hmc5843_suspend(struct device *dev)
> -{
> - struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
> - to_i2c_client(dev)));
> -
> - return hmc5843_set_mode(data, HMC5843_MODE_SLEEP);
> -}
> -
> -static int hmc5843_resume(struct device *dev)
> -{
> - struct hmc5843_data *data = iio_priv(i2c_get_clientdata(
> - to_i2c_client(dev)));
> -
> - return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
> -}
> -
> -static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume);
> -#define HMC5843_PM_OPS (&hmc5843_pm_ops)
> -#else
> -#define HMC5843_PM_OPS NULL
> -#endif
> -
> -static const struct i2c_device_id hmc5843_id[] = {
> - { "hmc5843", HMC5843_ID },
> - { "hmc5883", HMC5883_ID },
> - { "hmc5883l", HMC5883L_ID },
> - { }
> -};
> -MODULE_DEVICE_TABLE(i2c, hmc5843_id);
> -
> -static const struct of_device_id hmc5843_of_match[] = {
> - { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
> - { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
> - { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, hmc5843_of_match);
> -
> -static struct i2c_driver hmc5843_driver = {
> - .driver = {
> - .name = "hmc5843",
> - .pm = HMC5843_PM_OPS,
> - .of_match_table = hmc5843_of_match,
> - },
> - .id_table = hmc5843_id,
> - .probe = hmc5843_probe,
> - .remove = hmc5843_remove,
> -};
> -module_i2c_driver(hmc5843_driver);
> +EXPORT_SYMBOL(hmc5843_common_remove);
>
> MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti at ti.com>");
> -MODULE_DESCRIPTION("HMC5843/5883/5883L driver");
> +MODULE_DESCRIPTION("HMC5843/5883/5883L core driver");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> new file mode 100644
> index 0000000..20b5c93
> --- /dev/null
> +++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
> @@ -0,0 +1,75 @@
> +/*
> + * i2c driver for hmc5843/5843/5883/5883l
> + *
> + * Split from hmc5843.c
> + * Copyright (C) Josef Gajdusek <atx at atx.name>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#include "hmc5843.h"
> +
> +static struct regmap_config hmc5843_i2c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .rd_table = &hmc5843_readable_table,
> + .wr_table = &hmc5843_writable_table,
> + .volatile_table = &hmc5843_volatile_table,
> +
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int hmc5843_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + return hmc5843_common_probe(&client->dev,
> + devm_regmap_init_i2c(client, &hmc5843_i2c_regmap_config),
> + id->driver_data);
> +}
> +
> +static int hmc5843_i2c_remove(struct i2c_client *client)
> +{
> + return hmc5843_common_remove(&client->dev);
> +}
> +
> +static const struct i2c_device_id hmc5843_id[] = {
> + { "hmc5843", HMC5843_ID },
> + { "hmc5883", HMC5883_ID },
> + { "hmc5883l", HMC5883L_ID },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, hmc5843_id);
> +
> +static const struct of_device_id hmc5843_of_match[] = {
> + { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID },
> + { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID },
> + { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, hmc5843_of_match);
> +
> +static struct i2c_driver hmc5843_driver = {
> + .driver = {
> + .name = "hmc5843",
> + .pm = HMC5843_PM_OPS,
> + .of_match_table = hmc5843_of_match,
> + },
> + .id_table = hmc5843_id,
> + .probe = hmc5843_i2c_probe,
> + .remove = hmc5843_i2c_remove,
> +};
> +module_i2c_driver(hmc5843_driver);
> +
> +MODULE_AUTHOR("Josef Gajdusek <atx at atx.name>");
> +MODULE_DESCRIPTION("HMC5843/5883/5883L i2c driver");
> +MODULE_LICENSE("GPL");
>
More information about the devel
mailing list