[PATCH 24/29] staging: comedi: adl_pci9118: remove use of comedi_error()
H Hartley Sweeten
hsweeten at visionengravers.com
Thu Jul 17 18:57:51 UTC 2014
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregk at linuxfoundation.org>
---
drivers/staging/comedi/drivers/adl_pci9118.c | 49 +++++++++++++---------------
1 file changed, 23 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 93bd9ee..7cb9379 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -394,12 +394,12 @@ static int check_channel_list(struct comedi_device *dev,
/* correct channel and range number check itself comedi/range.c */
if (n_chan < 1) {
- comedi_error(dev, "range/channel list is empty!");
+ dev_err(dev->class_dev, "range/channel list is empty!\n");
return 0;
}
if ((frontadd + n_chan + backadd) > s->len_chanlist) {
- comedi_error(dev,
- "range/channel list is too long for actual configuration!\n");
+ dev_err(dev->class_dev,
+ "range/channel list is too long for actual configuration!\n");
return 0;
}
@@ -411,22 +411,20 @@ static int check_channel_list(struct comedi_device *dev,
for (i = 1; i < n_chan; i++) { /* check S.E/diff */
if ((CR_AREF(chanlist[i]) == AREF_DIFF) !=
(differencial)) {
- comedi_error(dev,
- "Differential and single ended inputs can't be mixed!");
+ dev_err(dev->class_dev,
+ "Differential and single ended inputs can't be mixed!\n");
return 0;
}
if ((CR_RANGE(chanlist[i]) < PCI9118_BIPOLAR_RANGES) !=
(bipolar)) {
- comedi_error(dev,
- "Bipolar and unipolar ranges "
- "can't be mixtured!");
+ dev_err(dev->class_dev,
+ "Bipolar and unipolar ranges can't be mixed!\n");
return 0;
}
if (!devpriv->usemux && differencial &&
(CR_CHAN(chanlist[i]) >= this_board->n_aichand)) {
- comedi_error(dev,
- "If AREF_DIFF is used then is "
- "available only first 8 channels!");
+ dev_err(dev->class_dev,
+ "AREF_DIFF is only available for the first 8 channels!\n");
return 0;
}
}
@@ -863,20 +861,21 @@ static char pci9118_decode_error_status(struct comedi_device *dev,
struct pci9118_private *devpriv = dev->private;
if (m & 0x100) {
- comedi_error(dev, "A/D FIFO Full status (Fatal Error!)");
+ dev_err(dev->class_dev,
+ "A/D FIFO Full status (Fatal Error!)\n");
devpriv->ai_maskerr &= ~0x100L;
}
if (m & 0x008) {
- comedi_error(dev,
- "A/D Burst Mode Overrun Status (Fatal Error!)");
+ dev_err(dev->class_dev,
+ "A/D Burst Mode Overrun Status (Fatal Error!)\n");
devpriv->ai_maskerr &= ~0x008L;
}
if (m & 0x004) {
- comedi_error(dev, "A/D Over Speed Status (Warning!)");
+ dev_err(dev->class_dev, "A/D Over Speed Status (Warning!)\n");
devpriv->ai_maskerr &= ~0x004L;
}
if (m & 0x002) {
- comedi_error(dev, "A/D Overrun Status (Fatal Error!)");
+ dev_err(dev->class_dev, "A/D Overrun Status (Fatal Error!)\n");
devpriv->ai_maskerr &= ~0x002L;
}
if (m & devpriv->ai_maskharderr) {
@@ -965,14 +964,14 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
unsigned int next_dma_buf, samplesinbuf, sampls, m;
if (int_amcc & MASTER_ABORT_INT) {
- comedi_error(dev, "AMCC IRQ - MASTER DMA ABORT!");
+ dev_err(dev->class_dev, "AMCC IRQ - MASTER DMA ABORT!\n");
s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
cfc_handle_events(dev, s);
return;
}
if (int_amcc & TARGET_ABORT_INT) {
- comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!");
+ dev_err(dev->class_dev, "AMCC IRQ - TARGET DMA ABORT!\n");
s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
cfc_handle_events(dev, s);
return;
@@ -1426,17 +1425,16 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev,
devpriv->AdControlReg |= AdControl_TmrTr;
break;
case 2:
- comedi_error(dev, "pci9118_ai_docmd_sampl() mode 2 bug!\n");
+ dev_err(dev->class_dev, "%s mode 2 bug!\n", __func__);
return -EIO;
case 3:
devpriv->AdControlReg |= AdControl_ExtM;
break;
case 4:
- comedi_error(dev, "pci9118_ai_docmd_sampl() mode 4 bug!\n");
+ dev_err(dev->class_dev, "%s mode 4 bug!\n", __func__);
return -EIO;
default:
- comedi_error(dev,
- "pci9118_ai_docmd_sampl() mode number bug!\n");
+ dev_err(dev->class_dev, "%s mode number bug!\n", __func__);
return -EIO;
}
@@ -1508,7 +1506,7 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev,
devpriv->AdFunctionReg |= AdFunction_Start;
break;
default:
- comedi_error(dev, "pci9118_ai_docmd_dma() mode number bug!\n");
+ dev_err(dev->class_dev, "%s mode number bug!\n", __func__);
return -EIO;
}
@@ -1676,9 +1674,8 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
(cmd->convert_src == TRIG_NOW))) {
/* double timed action */
if (!devpriv->usedma) {
- comedi_error(dev,
- "cmd->scan_begin_src=TRIG_TIMER works "
- "only with bus mastering!");
+ dev_err(dev->class_dev,
+ "cmd->scan_begin_src=TRIG_TIMER works only with bus mastering!\n");
return -EIO;
}
--
1.9.3
More information about the devel
mailing list