[PATCH 1/2] mmc: rtsx: Revert "mmc: rtsx: modify error handle and remove smatch warnings"
Ulf Hansson
ulf.hansson at linaro.org
Tue Apr 29 07:30:39 UTC 2014
On 29 April 2014 03:54, <micky_ching at realsil.com.cn> wrote:
> From: Micky Ching <micky_ching at realsil.com.cn>
>
> This reverts commit 1f7b581b3ffcb2a8437397a02f4af89fa6934d08.
>
> The patch depend on commit c42deffd5b53c9e583d83c7964854ede2f12410d
> <mmc: rtsx: add support for pre_req and post_req>, but the previous
> patch was discard. So we have to delete the patch.
>
> Signed-off-by: Micky Ching <micky_ching at realsil.com.cn>
Acked-by: Ulf Hansson <ulf.hansson at linaro.org>
The patch this is reverting has been recently queued for 3.16. So we
may either apply the revert or just drop the patch from the mmc-next
branch.
Kind regards
Ulf Hansson
> ---
> drivers/mmc/host/rtsx_pci_sdmmc.c | 119 +++++++++++++++++--------------------
> 1 file changed, 54 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 09340b9..76cfdcc 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -81,24 +81,25 @@ static inline void sd_clear_error(struct realtek_pci_sdmmc *host)
> }
>
> #ifdef DEBUG
> -static inline void sd_print_reg(struct realtek_pci_sdmmc *host, u16 reg)
> -{
> - u8 val = 0;
> -
> - if (rtsx_pci_read_register(host->pcr, reg, &val) < 0)
> - dev_dbg(sdmmc_dev(host), "read 0x%04x failed\n", reg);
> - else
> - dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", reg, val);
> -}
> -
> static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
> {
> + struct rtsx_pcr *pcr = host->pcr;
> u16 i;
> + u8 *ptr;
> +
> + /* Print SD host internal registers */
> + rtsx_pci_init_cmd(pcr);
> + for (i = 0xFDA0; i <= 0xFDAE; i++)
> + rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
> + for (i = 0xFD52; i <= 0xFD69; i++)
> + rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
> + rtsx_pci_send_cmd(pcr, 100);
>
> + ptr = rtsx_pci_get_cmd_data(pcr);
> for (i = 0xFDA0; i <= 0xFDAE; i++)
> - sd_print_reg(host, i);
> + dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
> for (i = 0xFD52; i <= 0xFD69; i++)
> - sd_print_reg(host, i);
> + dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
> }
> #else
> #define sd_print_debug_regs(host)
> @@ -124,27 +125,19 @@ static void sd_request_timeout(unsigned long host_addr)
> spin_lock_irqsave(&host->lock, flags);
>
> if (!host->mrq) {
> - dev_err(sdmmc_dev(host), "error: request not exist\n");
> - spin_unlock_irqrestore(&host->lock, flags);
> - return;
> + dev_err(sdmmc_dev(host), "error: no request exist\n");
> + goto out;
> }
>
> - if (host->cmd && host->data)
> - dev_err(sdmmc_dev(host), "error: cmd and data conflict\n");
> -
> - if (host->cmd) {
> + if (host->cmd)
> host->cmd->error = -ETIMEDOUT;
> - dev_dbg(sdmmc_dev(host), "timeout for cmd %d\n",
> - host->cmd->opcode);
> - tasklet_schedule(&host->cmd_tasklet);
> - }
> -
> - if (host->data) {
> + if (host->data)
> host->data->error = -ETIMEDOUT;
> - dev_dbg(sdmmc_dev(host), "timeout for data transfer\n");
> - tasklet_schedule(&host->data_tasklet);
> - }
>
> + dev_dbg(sdmmc_dev(host), "timeout for request\n");
> +
> +out:
> + tasklet_schedule(&host->finish_tasklet);
> spin_unlock_irqrestore(&host->lock, flags);
> }
>
> @@ -164,8 +157,7 @@ static void sd_finish_request(unsigned long host_addr)
> mrq = host->mrq;
> if (!mrq) {
> dev_err(sdmmc_dev(host), "error: no request need finish\n");
> - spin_unlock_irqrestore(&host->lock, flags);
> - return;
> + goto out;
> }
>
> cmd = mrq->cmd;
> @@ -175,6 +167,11 @@ static void sd_finish_request(unsigned long host_addr)
> (mrq->stop && mrq->stop->error) ||
> (cmd && cmd->error) || (data && data->error);
>
> + if (any_error) {
> + rtsx_pci_stop_cmd(pcr);
> + sd_clear_error(host);
> + }
> +
> if (data) {
> if (any_error)
> data->bytes_xfered = 0;
> @@ -191,6 +188,7 @@ static void sd_finish_request(unsigned long host_addr)
> host->cmd = NULL;
> host->data = NULL;
>
> +out:
> spin_unlock_irqrestore(&host->lock, flags);
> mutex_unlock(&pcr->pcr_mutex);
> mmc_request_done(host->mmc, mrq);
> @@ -375,11 +373,8 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
> if (cmd->opcode == SD_SWITCH_VOLTAGE) {
> err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
> 0xFF, SD_CLK_TOGGLE_EN);
> - if (err < 0) {
> - rtsx_pci_write_register(pcr, SD_BUS_STAT,
> - SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
> + if (err < 0)
> goto out;
> - }
> }
>
> rtsx_pci_init_cmd(pcr);
> @@ -441,8 +436,7 @@ static void sd_get_rsp(unsigned long host_addr)
>
> if (!cmd) {
> dev_err(sdmmc_dev(host), "error: cmd not exist\n");
> - spin_unlock_irqrestore(&host->lock, flags);
> - return;
> + goto out;
> }
>
> spin_lock(&pcr->lock);
> @@ -452,18 +446,16 @@ static void sd_get_rsp(unsigned long host_addr)
> err = -EINVAL;
> spin_unlock(&pcr->lock);
>
> - if (err < 0) {
> - rtsx_pci_stop_cmd(host->pcr);
> - sd_print_debug_regs(host);
> - sd_clear_error(host);
> + if (err < 0)
> goto out;
> - }
>
> rsp_type = host->rsp_type;
> stat_idx = host->rsp_len;
>
> - if (rsp_type == SD_RSP_TYPE_R0)
> + if (rsp_type == SD_RSP_TYPE_R0) {
> + err = 0;
> goto out;
> + }
>
> /* Eliminate returned value of CHECK_REG_CMD */
> ptr = rtsx_pci_get_cmd_data(pcr) + 1;
> @@ -506,19 +498,14 @@ static void sd_get_rsp(unsigned long host_addr)
> goto out;
>
> if (cmd->data) {
> - err = sd_start_multi_rw(host, host->mrq);
> - if (err) {
> - cmd->data->error = err;
> - dev_err(sdmmc_dev(host),
> - "error: start data transfer failed\n");
> - tasklet_schedule(&host->data_tasklet);
> - }
> + sd_start_multi_rw(host, host->mrq);
> spin_unlock_irqrestore(&host->lock, flags);
> return;
> }
>
> out:
> cmd->error = err;
> +
> tasklet_schedule(&host->finish_tasklet);
> spin_unlock_irqrestore(&host->lock, flags);
> }
> @@ -538,7 +525,7 @@ static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host,
> data->host_cookie = 0;
> }
>
> - if (next || data->host_cookie != host->next_data.cookie)
> + if (next || (!next && data->host_cookie != host->next_data.cookie))
> sg_count = rtsx_pci_dma_map_sg(pcr,
> data->sg, data->sg_len, read);
> else
> @@ -593,6 +580,7 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
> int uhs = mmc_card_uhs(card);
> int read = data->flags & MMC_DATA_READ;
> u8 cfg2, trans_mode;
> + int err;
> size_t data_len = data->blksz * data->blocks;
>
> if (host->data)
> @@ -653,7 +641,12 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
> mod_timer(&host->timer, jiffies + 10 * HZ);
> rtsx_pci_send_cmd_no_wait(pcr);
>
> - return rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
> + err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
> + if (err < 0) {
> + data->error = err;
> + tasklet_schedule(&host->finish_tasklet);
> + }
> + return 0;
> }
>
> static void sd_finish_multi_rw(unsigned long host_addr)
> @@ -667,9 +660,8 @@ static void sd_finish_multi_rw(unsigned long host_addr)
> spin_lock_irqsave(&host->lock, flags);
>
> if (!host->data) {
> - dev_err(sdmmc_dev(host), "error: data not exist\n");
> - spin_unlock_irqrestore(&host->lock, flags);
> - return;
> + dev_err(sdmmc_dev(host), "error: no data exist\n");
> + goto out;
> }
>
> data = host->data;
> @@ -680,22 +672,19 @@ static void sd_finish_multi_rw(unsigned long host_addr)
> else if (pcr->trans_result != TRANS_RESULT_OK)
> err = -EINVAL;
>
> - if (err < 0)
> + if (err < 0) {
> data->error = err;
> -
> - if (data->error) {
> - rtsx_pci_stop_cmd(host->pcr);
> - sd_print_debug_regs(host);
> - sd_clear_error(host);
> - dev_dbg(sdmmc_dev(host), "data transfer failed %d\n",
> - data->error);
> + goto out;
> }
>
> - if (!host->mrq->sbc && data->stop)
> + if (!host->mrq->sbc && data->stop) {
> sd_send_cmd(host, data->stop);
> - else
> - tasklet_schedule(&host->finish_tasklet);
> + spin_unlock_irqrestore(&host->lock, flags);
> + return;
> + }
>
> +out:
> + tasklet_schedule(&host->finish_tasklet);
> spin_unlock_irqrestore(&host->lock, flags);
> }
>
> --
> 1.7.9.5
>
More information about the devel
mailing list