[PATCH 2/4] rtl8192u: add space after '}' in r8192U_core.c
Dan Carpenter
dan.carpenter at oracle.com
Thu May 23 07:17:05 UTC 2013
On Thu, May 23, 2013 at 05:14:47AM +0300, Xenia Ragiadakou wrote:
> This patch fixes the following checkpatch error:
> ERROR: space required after that close brace '}'
>
> Signed-off-by: Xenia Ragiadakou <burzalodowa at gmail.com>
> ---
> drivers/staging/rtl8192u/r8192U_core.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
> index b8eee94..471b7ff 100644
> --- a/drivers/staging/rtl8192u/r8192U_core.c
> +++ b/drivers/staging/rtl8192u/r8192U_core.c
> @@ -169,7 +169,7 @@ static struct usb_driver rtl8192_usb_driver = {
> typedef struct _CHANNEL_LIST {
> u8 Channel[32];
> u8 Len;
> -}CHANNEL_LIST, *PCHANNEL_LIST;
> +} CHANNEL_LIST, *PCHANNEL_LIST;
>
> static CHANNEL_LIST ChannelPlan[] = {
> {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24}, //FCC
> @@ -803,7 +803,7 @@ void rtl8192_update_msr(struct net_device *dev)
> else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
> msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
>
> - }else
> + } else
> msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
} else {
msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
}
>
> write_nic_byte(dev, MSR, msr);
> @@ -1806,7 +1806,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
>
> if (!status){
> return 0;
> - }else{
> + } else{
} else {
> DMESGE("Error TX CMD URB, error %d",
> status);
> return -1;
> @@ -2507,7 +2507,7 @@ void rtl8192_update_ratr_table(struct net_device *dev)
> ratr_value &= 0x0FFFFFFF;
> if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz){
> ratr_value |= 0x80000000;
> - }else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){
> + } else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){
^^
} else if (!ieee->pHTInfo->bCurTxBW40MHz &&
ieee->pHTInfo->bCurShortGI20MHz) {
> ratr_value |= 0x80000000;
> }
> write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
> @@ -3714,7 +3714,7 @@ CamRestoreAllEntry(struct net_device *dev)
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
> - {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
{0x00, 0x00, 0x00, 0x00, 0x00, 0x03},
};
> static u8 CAM_CONST_BROAD[] =
> {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
>
> @@ -4944,7 +4944,7 @@ static void rtl8192_query_rxphystatus(
> if (pstats->RxPWDBAll > 40)
> {
> sq = 100;
> - }else
> + } else
> {
} else {
> sq = pcck_buf->sq_rpt;
>
> @@ -5295,7 +5295,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
>
> stats->bHwError = 1;
> stats->rate = MGN_1M; //Set 1M rate by default
> - }else
> + } else
> {
} else {
> stats->rate = ret_rate;
> }
> @@ -5423,9 +5423,9 @@ void rtl8192_rx_nomal(struct sk_buff *skb)
> unicast_packet = false;
> if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
> //TODO
> - }else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
> + } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
^^
There should be a space here.
> //TODO
> - }else {
> + } else {
> /* unicast packet */
> unicast_packet = true;
> }
> @@ -5483,9 +5483,9 @@ void rtl8192_rx_nomal(struct sk_buff *skb)
> unicast_packet = false;
> if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
> //TODO
> - }else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
> + } else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){
^^
Space.
> //TODO
> - }else {
> + } else {
> /* unicast packet */
> unicast_packet = true;
> }
> --
> 1.7.10.4
>
> _______________________________________________
> devel mailing list
> devel at linuxdriverproject.org
> http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
More information about the devel
mailing list