[PATCH 24/26] staging: comedi: ni_labpc: rename some of the private data variables
H Hartley Sweeten
hsweeten at visionengravers.com
Wed Mar 20 01:10:33 UTC 2013
For aesthetic reasons, rename the 'command*_bits' and 'status*_bits'
variables in the private data in order to shorten some of the long
lines.
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_labpc.c | 272 ++++++++++++++----------------
drivers/staging/comedi/drivers/ni_labpc.h | 16 +-
2 files changed, 139 insertions(+), 149 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 4c148a7..b8e106a 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -279,52 +279,51 @@ static int labpc_ai_insn_read(struct comedi_device *dev,
/* disable timed conversions */
spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+ devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
/* disable interrupt generation and dma */
- devpriv->command3_bits = 0;
- devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ devpriv->cmd3 = 0;
+ devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
/* set gain and channel */
- devpriv->command1_bits = 0;
+ devpriv->cmd1 = 0;
chan = CR_CHAN(insn->chanspec);
range = CR_RANGE(insn->chanspec);
- devpriv->command1_bits |= thisboard->ai_range_code[range];
+ devpriv->cmd1 |= thisboard->ai_range_code[range];
/* munge channel bits for differential/scan disabled mode */
if (CR_AREF(insn->chanspec) == AREF_DIFF)
chan *= 2;
- devpriv->command1_bits |= ADC_CHAN_BITS(chan);
- devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
+ devpriv->cmd1 |= ADC_CHAN_BITS(chan);
+ devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
/* setup command6 register for 1200 boards */
if (thisboard->register_layout == labpc_1200_layout) {
/* reference inputs to ground or common? */
if (CR_AREF(insn->chanspec) != AREF_GROUND)
- devpriv->command6_bits |= ADC_COMMON_BIT;
+ devpriv->cmd6 |= ADC_COMMON_BIT;
else
- devpriv->command6_bits &= ~ADC_COMMON_BIT;
+ devpriv->cmd6 &= ~ADC_COMMON_BIT;
/* bipolar or unipolar range? */
if (labpc_range_is_unipolar(s, range))
- devpriv->command6_bits |= ADC_UNIP_BIT;
+ devpriv->cmd6 |= ADC_UNIP_BIT;
else
- devpriv->command6_bits &= ~ADC_UNIP_BIT;
+ devpriv->cmd6 &= ~ADC_UNIP_BIT;
/* don't interrupt on fifo half full */
- devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
+ devpriv->cmd6 &= ~ADC_FHF_INTR_EN_BIT;
/* don't enable interrupt on counter a1 terminal count? */
- devpriv->command6_bits &= ~A1_INTR_EN_BIT;
+ devpriv->cmd6 &= ~A1_INTR_EN_BIT;
/* write to register */
- devpriv->write_byte(devpriv->command6_bits,
- dev->iobase + COMMAND6_REG);
+ devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
}
/* setup command4 register */
- devpriv->command4_bits = 0;
- devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+ devpriv->cmd4 = 0;
+ devpriv->cmd4 |= EXT_CONVERT_DISABLE_BIT;
/* single-ended/differential */
if (CR_AREF(insn->chanspec) == AREF_DIFF)
- devpriv->command4_bits |= ADC_DIFF_BIT;
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+ devpriv->cmd4 |= ADC_DIFF_BIT;
+ devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
/*
* initialize pacer counter output to make sure it doesn't
@@ -773,12 +772,12 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* make sure board is disabled before setting up acquisition */
spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+ devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
- devpriv->command3_bits = 0;
- devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ devpriv->cmd3 = 0;
+ devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
/* initialize software conversion count */
if (cmd->stop_src == TRIG_COUNT)
@@ -829,36 +828,35 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (thisboard->register_layout == labpc_1200_layout) {
/* reference inputs to ground or common? */
if (aref != AREF_GROUND)
- devpriv->command6_bits |= ADC_COMMON_BIT;
+ devpriv->cmd6 |= ADC_COMMON_BIT;
else
- devpriv->command6_bits &= ~ADC_COMMON_BIT;
+ devpriv->cmd6 &= ~ADC_COMMON_BIT;
/* bipolar or unipolar range? */
if (labpc_range_is_unipolar(s, range))
- devpriv->command6_bits |= ADC_UNIP_BIT;
+ devpriv->cmd6 |= ADC_UNIP_BIT;
else
- devpriv->command6_bits &= ~ADC_UNIP_BIT;
+ devpriv->cmd6 &= ~ADC_UNIP_BIT;
/* interrupt on fifo half full? */
if (xfer == fifo_half_full_transfer)
- devpriv->command6_bits |= ADC_FHF_INTR_EN_BIT;
+ devpriv->cmd6 |= ADC_FHF_INTR_EN_BIT;
else
- devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
+ devpriv->cmd6 &= ~ADC_FHF_INTR_EN_BIT;
/* enable interrupt on counter a1 terminal count? */
if (cmd->stop_src == TRIG_EXT)
- devpriv->command6_bits |= A1_INTR_EN_BIT;
+ devpriv->cmd6 |= A1_INTR_EN_BIT;
else
- devpriv->command6_bits &= ~A1_INTR_EN_BIT;
+ devpriv->cmd6 &= ~A1_INTR_EN_BIT;
/* are we scanning up or down through channels? */
if (mode == MODE_MULT_CHAN_UP)
- devpriv->command6_bits |= ADC_SCAN_UP_BIT;
+ devpriv->cmd6 |= ADC_SCAN_UP_BIT;
else
- devpriv->command6_bits &= ~ADC_SCAN_UP_BIT;
+ devpriv->cmd6 &= ~ADC_SCAN_UP_BIT;
/* write to register */
- devpriv->write_byte(devpriv->command6_bits,
- dev->iobase + COMMAND6_REG);
+ devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
}
/* setup channel list, etc (command1 register) */
- devpriv->command1_bits = 0;
+ devpriv->cmd1 = 0;
if (mode == MODE_MULT_CHAN_UP)
channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
else
@@ -867,18 +865,17 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if ((mode == MODE_SINGLE_CHAN || mode == MODE_SINGLE_CHAN_INTERVAL) &&
aref == AREF_DIFF)
channel *= 2;
- devpriv->command1_bits |= ADC_CHAN_BITS(channel);
- devpriv->command1_bits |= thisboard->ai_range_code[range];
- devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
+ devpriv->cmd1 |= ADC_CHAN_BITS(channel);
+ devpriv->cmd1 |= thisboard->ai_range_code[range];
+ devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
/* manual says to set scan enable bit on second pass */
if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) {
- devpriv->command1_bits |= ADC_SCAN_EN_BIT;
+ devpriv->cmd1 |= ADC_SCAN_EN_BIT;
/* need a brief delay before enabling scan, or scan
* list will get screwed when you switch
* between scan up to scan down mode - dunno why */
udelay(1);
- devpriv->write_byte(devpriv->command1_bits,
- dev->iobase + COMMAND1_REG);
+ devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
}
devpriv->write_byte(cmd->chanlist_len,
@@ -945,50 +942,50 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
enable_dma(devpriv->dma_chan);
release_dma_lock(irq_flags);
/* enable board's dma */
- devpriv->command3_bits |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
+ devpriv->cmd3 |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
} else
- devpriv->command3_bits &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
+ devpriv->cmd3 &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
#endif
/* enable error interrupts */
- devpriv->command3_bits |= ERR_INTR_EN_BIT;
+ devpriv->cmd3 |= ERR_INTR_EN_BIT;
/* enable fifo not empty interrupt? */
if (xfer == fifo_not_empty_transfer)
- devpriv->command3_bits |= ADC_FNE_INTR_EN_BIT;
+ devpriv->cmd3 |= ADC_FNE_INTR_EN_BIT;
else
- devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
- devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ devpriv->cmd3 &= ~ADC_FNE_INTR_EN_BIT;
+ devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
/* setup any external triggering/pacing (command4 register) */
- devpriv->command4_bits = 0;
+ devpriv->cmd4 = 0;
if (cmd->convert_src != TRIG_EXT)
- devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+ devpriv->cmd4 |= EXT_CONVERT_DISABLE_BIT;
/* XXX should discard first scan when using interval scanning
* since manual says it is not synced with scan clock */
if (labpc_use_continuous_mode(cmd, mode) == 0) {
- devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+ devpriv->cmd4 |= INTERVAL_SCAN_EN_BIT;
if (cmd->scan_begin_src == TRIG_EXT)
- devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+ devpriv->cmd4 |= EXT_SCAN_EN_BIT;
}
/* single-ended/differential */
if (aref == AREF_DIFF)
- devpriv->command4_bits |= ADC_DIFF_BIT;
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+ devpriv->cmd4 |= ADC_DIFF_BIT;
+ devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
/* startup acquisition */
/* command2 reg */
/* use 2 cascaded counters for pacing */
spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->command2_bits |= CASCADE_BIT;
+ devpriv->cmd2 |= CASCADE_BIT;
switch (cmd->start_src) {
case TRIG_EXT:
- devpriv->command2_bits |= HWTRIG_BIT;
- devpriv->command2_bits &= ~PRETRIG_BIT & ~SWTRIG_BIT;
+ devpriv->cmd2 |= HWTRIG_BIT;
+ devpriv->cmd2 &= ~PRETRIG_BIT & ~SWTRIG_BIT;
break;
case TRIG_NOW:
- devpriv->command2_bits |= SWTRIG_BIT;
- devpriv->command2_bits &= ~PRETRIG_BIT & ~HWTRIG_BIT;
+ devpriv->cmd2 |= SWTRIG_BIT;
+ devpriv->cmd2 &= ~PRETRIG_BIT & ~HWTRIG_BIT;
break;
default:
comedi_error(dev, "bug with start_src");
@@ -998,7 +995,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
}
switch (cmd->stop_src) {
case TRIG_EXT:
- devpriv->command2_bits |= HWTRIG_BIT | PRETRIG_BIT;
+ devpriv->cmd2 |= HWTRIG_BIT | PRETRIG_BIT;
break;
case TRIG_COUNT:
case TRIG_NONE:
@@ -1008,7 +1005,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
spin_unlock_irqrestore(&dev->spinlock, flags);
return -1;
}
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
@@ -1020,12 +1017,12 @@ static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+ devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
- devpriv->command3_bits = 0;
- devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ devpriv->cmd3 = 0;
+ devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
return 0;
}
@@ -1041,7 +1038,7 @@ static void labpc_drain_dma(struct comedi_device *dev)
unsigned int max_points, num_points, residue, leftover;
int i;
- status = devpriv->status1_bits;
+ status = devpriv->stat1;
flags = claim_dma_lock();
disable_dma(devpriv->dma_chan);
@@ -1108,9 +1105,9 @@ static int labpc_drain_fifo(struct comedi_device *dev)
const int timeout = 10000;
unsigned int i;
- devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG);
+ devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
- for (i = 0; (devpriv->status1_bits & DATA_AVAIL_BIT) && i < timeout;
+ for (i = 0; (devpriv->stat1 & DATA_AVAIL_BIT) && i < timeout;
i++) {
/* quit if we have all the data we want */
if (async->cmd.stop_src == TRIG_COUNT) {
@@ -1122,8 +1119,7 @@ static int labpc_drain_fifo(struct comedi_device *dev)
msb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
data = (msb << 8) | lsb;
cfc_write_to_buffer(dev->read_subdev, data);
- devpriv->status1_bits =
- devpriv->read_byte(dev->iobase + STATUS1_REG);
+ devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
}
if (i == timeout) {
comedi_error(dev, "ai timeout, fifo never empties");
@@ -1168,19 +1164,18 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
async->events = 0;
/* read board status */
- devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG);
+ devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
if (thisboard->register_layout == labpc_1200_layout)
- devpriv->status2_bits =
- devpriv->read_byte(dev->iobase + STATUS2_REG);
+ devpriv->stat2 = devpriv->read_byte(dev->iobase + STATUS2_REG);
- if ((devpriv->status1_bits & (DMATC_BIT | TIMER_BIT | OVERFLOW_BIT |
+ if ((devpriv->stat1 & (DMATC_BIT | TIMER_BIT | OVERFLOW_BIT |
OVERRUN_BIT | DATA_AVAIL_BIT)) == 0
- && (devpriv->status2_bits & A1_TC_BIT) == 0
- && (devpriv->status2_bits & FNHF_BIT)) {
+ && (devpriv->stat2 & A1_TC_BIT) == 0
+ && (devpriv->stat2 & FNHF_BIT)) {
return IRQ_NONE;
}
- if (devpriv->status1_bits & OVERRUN_BIT) {
+ if (devpriv->stat1 & OVERRUN_BIT) {
/* clear error interrupt */
devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -1195,22 +1190,22 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
* if a dma terminal count of external stop trigger
* has occurred
*/
- if (devpriv->status1_bits & DMATC_BIT ||
+ if (devpriv->stat1 & DMATC_BIT ||
(thisboard->register_layout == labpc_1200_layout
- && devpriv->status2_bits & A1_TC_BIT)) {
+ && devpriv->stat2 & A1_TC_BIT)) {
handle_isa_dma(dev);
}
} else
#endif
labpc_drain_fifo(dev);
- if (devpriv->status1_bits & TIMER_BIT) {
+ if (devpriv->stat1 & TIMER_BIT) {
comedi_error(dev, "handled timer interrupt?");
/* clear it */
devpriv->write_byte(0x1, dev->iobase + TIMER_CLEAR_REG);
}
- if (devpriv->status1_bits & OVERFLOW_BIT) {
+ if (devpriv->stat1 & OVERFLOW_BIT) {
/* clear error interrupt */
devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -1220,7 +1215,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
}
/* handle external stop trigger */
if (cmd->stop_src == TRIG_EXT) {
- if (devpriv->status2_bits & A1_TC_BIT) {
+ if (devpriv->stat2 & A1_TC_BIT) {
labpc_drain_dregs(dev);
labpc_cancel(dev, s);
async->events |= COMEDI_CB_EOA;
@@ -1256,19 +1251,19 @@ static int labpc_ao_insn_write(struct comedi_device *dev,
/* note: hardware bug in daqcard-1200 means pacing cannot
* be independently enabled/disabled for its the two channels */
spin_lock_irqsave(&dev->spinlock, flags);
- devpriv->command2_bits &= ~DAC_PACED_BIT(channel);
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+ devpriv->cmd2 &= ~DAC_PACED_BIT(channel);
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
/* set range */
if (thisboard->register_layout == labpc_1200_layout) {
range = CR_RANGE(insn->chanspec);
if (labpc_range_is_unipolar(s, range))
- devpriv->command6_bits |= DAC_UNIP_BIT(channel);
+ devpriv->cmd6 |= DAC_UNIP_BIT(channel);
else
- devpriv->command6_bits &= ~DAC_UNIP_BIT(channel);
+ devpriv->cmd6 &= ~DAC_UNIP_BIT(channel);
/* write to register */
- devpriv->write_byte(devpriv->command6_bits,
+ devpriv->write_byte(devpriv->cmd6,
dev->iobase + COMMAND6_REG);
}
/* send data */
@@ -1314,19 +1309,19 @@ static void labpc_serial_out(struct comedi_device *dev, unsigned int value,
for (i = 1; i <= value_width; i++) {
/* clear serial clock */
- devpriv->command5_bits &= ~SCLOCK_BIT;
+ devpriv->cmd5 &= ~SCLOCK_BIT;
/* send bits most significant bit first */
if (value & (1 << (value_width - i)))
- devpriv->command5_bits |= SDATA_BIT;
+ devpriv->cmd5 |= SDATA_BIT;
else
- devpriv->command5_bits &= ~SDATA_BIT;
+ devpriv->cmd5 &= ~SDATA_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits,
+ devpriv->write_byte(devpriv->cmd5,
dev->iobase + COMMAND5_REG);
/* set clock to load bit */
- devpriv->command5_bits |= SCLOCK_BIT;
+ devpriv->cmd5 |= SCLOCK_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits,
+ devpriv->write_byte(devpriv->cmd5,
dev->iobase + COMMAND5_REG);
}
}
@@ -1341,20 +1336,17 @@ static unsigned int labpc_serial_in(struct comedi_device *dev)
for (i = 1; i <= value_width; i++) {
/* set serial clock */
- devpriv->command5_bits |= SCLOCK_BIT;
+ devpriv->cmd5 |= SCLOCK_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits,
- dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* clear clock bit */
- devpriv->command5_bits &= ~SCLOCK_BIT;
+ devpriv->cmd5 &= ~SCLOCK_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits,
- dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* read bits most significant bit first */
udelay(1);
- devpriv->status2_bits =
- devpriv->read_byte(dev->iobase + STATUS2_REG);
- if (devpriv->status2_bits & EEPROM_OUT_BIT)
+ devpriv->stat2 = devpriv->read_byte(dev->iobase + STATUS2_REG);
+ if (devpriv->stat2 & EEPROM_OUT_BIT)
value |= 1 << (value_width - i);
}
@@ -1372,12 +1364,12 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev,
const int write_length = 8;
/* enable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
- devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+ devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* send read instruction */
labpc_serial_out(dev, read_instruction, write_length);
@@ -1387,9 +1379,9 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev,
value = labpc_serial_in(dev);
/* disable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
return value;
}
@@ -1402,12 +1394,12 @@ static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
const int write_length = 8; /* 8 bit write lengths to eeprom */
/* enable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
- devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+ devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* send read status instruction */
labpc_serial_out(dev, read_status_instruction, write_length);
@@ -1415,9 +1407,9 @@ static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
value = labpc_serial_in(dev);
/* disable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
return value;
}
@@ -1447,36 +1439,36 @@ static int labpc_eeprom_write(struct comedi_device *dev,
devpriv->eeprom_data[address] = value;
/* enable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
- devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+ devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* send write_enable instruction */
labpc_serial_out(dev, write_enable_instruction, write_length);
- devpriv->command5_bits &= ~EEPROM_EN_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* send write instruction */
- devpriv->command5_bits |= EEPROM_EN_BIT;
+ devpriv->cmd5 |= EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
labpc_serial_out(dev, write_instruction, write_length);
/* send 8 bit address to write to */
labpc_serial_out(dev, address, write_length);
/* write value */
labpc_serial_out(dev, value, write_length);
- devpriv->command5_bits &= ~EEPROM_EN_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* disable read/write to eeprom */
- devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+ devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
return 0;
}
@@ -1492,10 +1484,10 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
devpriv->caldac[channel] = value;
/* clear caldac load bit and make sure we don't write to eeprom */
- devpriv->command5_bits &=
+ devpriv->cmd5 &=
~CALDAC_LOAD_BIT & ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
/* write 4 bit channel */
labpc_serial_out(dev, channel, 4);
@@ -1503,12 +1495,12 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
labpc_serial_out(dev, value, 8);
/* set and clear caldac bit to load caldac value */
- devpriv->command5_bits |= CALDAC_LOAD_BIT;
+ devpriv->cmd5 |= CALDAC_LOAD_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
- devpriv->command5_bits &= ~CALDAC_LOAD_BIT;
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+ devpriv->cmd5 &= ~CALDAC_LOAD_BIT;
udelay(1);
- devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
}
static int labpc_calib_insn_write(struct comedi_device *dev,
@@ -1586,15 +1578,13 @@ int labpc_common_attach(struct comedi_device *dev,
devpriv->write_byte = labpc_outb;
}
/* initialize board's command registers */
- devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
- devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+ devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
+ devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
+ devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
+ devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
if (thisboard->register_layout == labpc_1200_layout) {
- devpriv->write_byte(devpriv->command5_bits,
- dev->iobase + COMMAND5_REG);
- devpriv->write_byte(devpriv->command6_bits,
- dev->iobase + COMMAND6_REG);
+ devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+ devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
}
if (irq) {
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index c1a70a9..d141b5e 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -57,15 +57,15 @@ struct labpc_private {
/* software copy of analog output values */
unsigned int ao_value[NUM_AO_CHAN];
/* software copys of bits written to command registers */
- unsigned int command1_bits;
- unsigned int command2_bits;
- unsigned int command3_bits;
- unsigned int command4_bits;
- unsigned int command5_bits;
- unsigned int command6_bits;
+ unsigned int cmd1;
+ unsigned int cmd2;
+ unsigned int cmd3;
+ unsigned int cmd4;
+ unsigned int cmd5;
+ unsigned int cmd6;
/* store last read of board status registers */
- unsigned int status1_bits;
- unsigned int status2_bits;
+ unsigned int stat1;
+ unsigned int stat2;
/*
* value to load into board's counter a0 (conversion pacing) for timed
* conversions
--
1.8.1.4
More information about the devel
mailing list