[PATCH] staging: comedi: Fix typo in comedi
Masanari Iida
standby24x7 at gmail.com
Thu Mar 7 14:48:40 UTC 2013
Correct spelling typos in staging/comedi
Signed-off-by: Masanari Iida <standby24x7 at gmail.com>
---
drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c | 4 ++--
drivers/staging/comedi/drivers/adv_pci1710.c | 4 ++--
drivers/staging/comedi/drivers/cb_pcidas64.c | 2 +-
drivers/staging/comedi/drivers/icp_multi.c | 2 +-
drivers/staging/comedi/drivers/me_daq.c | 2 +-
drivers/staging/comedi/drivers/pcl816.c | 2 +-
drivers/staging/comedi/drivers/usbdux.c | 2 +-
drivers/staging/comedi/drivers/usbduxsigma.c | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
index 1e05732..97e7eec 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
@@ -704,9 +704,9 @@ static int i_APCI1710_InsnReadSSIValue(struct comedi_device *dev,
| unsigned char *_ pb_ChannelStatus) |
+----------------------------------------------------------------------------+
| Task :
- (0) Set the digital output from selected SSI moule |
+ (0) Set the digital output from selected SSI module |
| (b_ModuleNbr) ON
- (1) Set the digital output from selected SSI moule |
+ (1) Set the digital output from selected SSI module |
| (b_ModuleNbr) OFF
(2)Read the status from selected SSI digital input |
| (b_InputChannel)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 3d788c7..b89643b 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -307,7 +307,7 @@ struct pci1710_private {
unsigned int ai_et_CntrlReg;
unsigned int ai_et_MuxVal;
unsigned int ai_et_div1, ai_et_div2;
- unsigned int act_chanlist[32]; /* list of scaned channel */
+ unsigned int act_chanlist[32]; /* list of scanned channel */
unsigned char act_chanlist_len; /* len of scanlist */
unsigned char act_chanlist_pos; /* actual position in MUX list */
unsigned char da_ranges; /* copy of D/A outpit range register */
@@ -334,7 +334,7 @@ static const unsigned int muxonechan[] = {
/*
==============================================================================
- Check if channel list from user is builded correctly
+ Check if channel list from user is built correctly
If it's ok, then program scan/gain logic.
This works for all cards.
*/
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 9f3112c..a6f907a 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1523,7 +1523,7 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
struct pcidas64_private *devpriv = dev->private;
int i;
- /* alocate pci dma buffers */
+ /* allocate pci dma buffers */
for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
devpriv->ai_buffer[i] =
pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 1e08f91..34ff59f 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -120,7 +120,7 @@ struct icp_multi_private {
unsigned int DacCmdStatus; /* DAC Command/Status register */
unsigned int IntEnable; /* Interrupt Enable register */
unsigned int IntStatus; /* Interrupt Status register */
- unsigned int act_chanlist[32]; /* list of scaned channel */
+ unsigned int act_chanlist[32]; /* list of scanned channel */
unsigned char act_chanlist_len; /* len of scanlist */
unsigned char act_chanlist_pos; /* actual position in MUX list */
unsigned int *ai_chanlist; /* actaul chanlist */
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 06490eb..012ed72 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -426,7 +426,7 @@ static int me2600_xilinx_download(struct comedi_device *dev,
/*
* Loop for writing firmware byte by byte to xilinx
- * Firmware data start at offfset 16
+ * Firmware data start at offset 16
*/
for (i = 0; i < file_length; i++)
writeb((data[16 + i] & 0xff),
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index f625fda..ebd9e47 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -837,7 +837,7 @@ start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
/*
==============================================================================
- Check if channel list from user is builded correctly
+ Check if channel list from user is built correctly
If it's ok, then return non-zero length of repeated segment of channel list
*/
static int
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1a0062a..6f2e429 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -56,7 +56,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
* functions firmware upload is by fxload and no longer by comedi (due to
* enumeration)
* 0.97: USB IDs received, adjusted table
- * 0.98: SMP, locking, memroy alloc: moved all usb memory alloc
+ * 0.98: SMP, locking, memory alloc: moved all usb memory alloc
* to the usb subsystem and moved all comedi related memory
* alloc to comedi.
* | kernel | registration | usbdux-usb | usbdux-comedi | comedi |
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index d066351..cfbfeeb 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -1369,7 +1369,7 @@ static int usbdux_getstatusinfo(struct comedi_device *dev, int chan)
/* 32 bits big endian from the A/D converter */
one = be32_to_cpu(*((int32_t *)((this_usbduxsub->insnBuffer)+1)));
- /* mask out the staus byte */
+ /* mask out the status byte */
one = one & 0x00ffffff;
one = one ^ 0x00800000;
--
1.8.2.rc1.19.g443d803
More information about the devel
mailing list