[PATCH 3/5] staging: rtl8192u: fix braces in r8192U.h
Xenia Ragiadakou
burzalodowa at gmail.com
Fri Jun 7 20:34:28 UTC 2013
This patch fixes the whitespace around braces and brace
position, and corrects the following checkpatch errors:
ERROR: space required after that close brace '}'
ERROR: space required before the open brace '{'
ERROR: that open brace { should be on the previous line
ERROR: open brace '{' following enum go on the same line
Signed-off-by: Xenia Ragiadakou <burzalodowa at gmail.com>
---
drivers/staging/rtl8192u/r8192U.h | 106 ++++++++++++++++++-------------------
1 file changed, 52 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 4457c89..6136b1c 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -88,7 +88,7 @@ extern u32 rt_global_debug_component;
do { if (rt_global_debug_component & component) \
printk(KERN_DEBUG RTL819xU_MODULE_NAME ":" x "\n" , \
##args);\
-}while(0);
+} while(0);
#define COMP_TRACE BIT0 /* Function call tracing. */
#define COMP_DBG BIT1
@@ -142,13 +142,11 @@ do { if (rt_global_debug_component & component) \
* please set ieee80211_debug_level to DATA|BA
*/
#define RT_DEBUG_DATA(level, data, datalen) \
- do{ if ((rt_global_debug_component & (level)) == (level)) \
- { \
+ do { if ((rt_global_debug_component & (level)) == (level)) { \
int i; \
u8 *pdata = (u8 *) data; \
printk(KERN_DEBUG RTL819xU_MODULE_NAME ": %s()\n", __FUNCTION__); \
- for(i=0; i<(int)(datalen); i++) \
- { \
+ for(i=0; i<(int)(datalen); i++) { \
printk("%2x ", pdata[i]); \
if ((i+1)%16 == 0) printk("\n"); \
} \
@@ -246,7 +244,7 @@ typedef struct _tx_desc_819x_usb {
u32 Reserved5;
u32 Reserved6;
u32 Reserved7;
-}tx_desc_819x_usb, *ptx_desc_819x_usb;
+} tx_desc_819x_usb, *ptx_desc_819x_usb;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
typedef struct _tx_desc_819x_usb_aggr_subframe {
@@ -270,7 +268,7 @@ typedef struct _tx_desc_819x_usb_aggr_subframe {
u8 SecType:2;
u8 PacketID:7;
u8 OWN:1;
-}tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
+} tx_desc_819x_usb_aggr_subframe, *ptx_desc_819x_usb_aggr_subframe;
#endif
@@ -300,7 +298,7 @@ typedef struct _tx_desc_cmd_819x_usb {
u32 Reserved6;
u32 Reserved7;
u32 Reserved8;
-}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
+} tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
typedef struct _tx_fwinfo_819x_usb {
@@ -334,15 +332,15 @@ typedef struct _tx_fwinfo_819x_usb {
u32 TxAGCSign:1;
u32 Tx_INFO_RSVD:6;
u32 PacketID:13;
-}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
+} tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
typedef struct rtl8192_rx_info {
struct urb *urb;
struct net_device *dev;
u8 out_pipe;
-}rtl8192_rx_info ;
+} rtl8192_rx_info ;
-typedef struct rx_desc_819x_usb{
+typedef struct rx_desc_819x_usb {
/* DOWRD 0 */
u16 Length:14;
u16 CRC32:1;
@@ -355,10 +353,10 @@ typedef struct rx_desc_819x_usb{
/* DWORD 1 */
u32 Reserved2;
-}rx_desc_819x_usb, *prx_desc_819x_usb;
+} rx_desc_819x_usb, *prx_desc_819x_usb;
#ifdef USB_RX_AGGREGATION_SUPPORT
-typedef struct _rx_desc_819x_usb_aggr_subframe{
+typedef struct _rx_desc_819x_usb_aggr_subframe {
/* DOWRD 0 */
u16 Length:14;
u16 CRC32:1;
@@ -372,10 +370,10 @@ typedef struct _rx_desc_819x_usb_aggr_subframe{
u8 Reserved1:4;
u8 Reserved2;
u16 Reserved3;
-}rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
+} rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
#endif
-typedef struct rx_drvinfo_819x_usb{
+typedef struct rx_drvinfo_819x_usb {
/* DWORD 0 */
u16 Reserved1:12;
u16 PartAggr:1;
@@ -396,7 +394,7 @@ typedef struct rx_drvinfo_819x_usb{
/* DWORD 1 */
u32 TSFL;
-}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
+} rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
/* Support till 64 bit bus width OS */
#define MAX_DEV_ADDR_SIZE 8
@@ -422,53 +420,52 @@ typedef struct rx_drvinfo_819x_usb{
/* Octets for crc32 (FCS, ICV) */
#define scrclng 4
-typedef enum rf_optype
-{
+typedef enum rf_optype {
RF_OP_By_SW_3wire = 0,
RF_OP_By_FW,
RF_OP_MAX
-}rf_op_type;
+} rf_op_type;
/* 8190 Loopback Mode definition */
-typedef enum _rtl819xUsb_loopback{
+typedef enum _rtl819xUsb_loopback {
RTL819xU_NO_LOOPBACK = 0,
RTL819xU_MAC_LOOPBACK = 1,
RTL819xU_DMA_LOOPBACK = 2,
RTL819xU_CCK_LOOPBACK = 3,
-}rtl819xUsb_loopback_e;
+} rtl819xUsb_loopback_e;
/* due to rtl8192 firmware */
-typedef enum _desc_packet_type_e{
+typedef enum _desc_packet_type_e {
DESC_PACKET_TYPE_INIT = 0,
DESC_PACKET_TYPE_NORMAL = 1,
-}desc_packet_type_e;
+} desc_packet_type_e;
-typedef enum _firmware_status{
+typedef enum _firmware_status {
FW_STATUS_0_INIT = 0,
FW_STATUS_1_MOVE_BOOT_CODE = 1,
FW_STATUS_2_MOVE_MAIN_CODE = 2,
FW_STATUS_3_TURNON_CPU = 3,
FW_STATUS_4_MOVE_DATA_CODE = 4,
FW_STATUS_5_READY = 5,
-}firmware_status_e;
+} firmware_status_e;
typedef struct _rt_firmare_seg_container {
u16 seg_size;
u8 *seg_ptr;
-}fw_seg_container, *pfw_seg_container;
-typedef struct _rt_firmware{
+} fw_seg_container, *pfw_seg_container;
+typedef struct _rt_firmware {
firmware_status_e firmware_status;
u16 cmdpacket_frag_thresold;
#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000
u8 firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];
u16 firmware_buf_size;
-}rt_firmware, *prt_firmware;
+} rt_firmware, *prt_firmware;
/* Add this to 9100 bytes to receive A-MSDU from RT-AP */
#define MAX_RECEIVE_BUFFER_SIZE 9100
-typedef struct _rt_firmware_info_819xUsb{
+typedef struct _rt_firmware_info_819xUsb {
u8 sz_info[16];
-}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
+} rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
/* Firmware Queue Layout */
#define NUM_OF_FIRMWARE_QUEUE 10
@@ -550,7 +547,7 @@ typedef struct buffer {
} buffer;
-typedef struct rtl_reg_debug{
+typedef struct rtl_reg_debug {
unsigned int cmd;
struct {
unsigned char type;
@@ -559,7 +556,7 @@ typedef struct rtl_reg_debug{
unsigned char length;
} head;
unsigned char buf[0xff];
-}rtl_reg_debug;
+} rtl_reg_debug;
@@ -570,13 +567,13 @@ typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
u32 ofdm[8];
u32 ht_mcs[4][16];
-}rt_tx_rahis_t, *prt_tx_rahis_t;
+} rt_tx_rahis_t, *prt_tx_rahis_t;
typedef struct _RT_SMOOTH_DATA_4RF {
char elements[4][100]; /* array to store values */
u32 index; /* index to current array to store */
u32 TotalNum; /* num of valid elements */
u32 TotalVal[4]; /* sum of valid elements */
-}RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;
+} RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;
/* This maybe changed for D-cut larger aggregation size */
#define MAX_8192U_RX_SIZE 8192
@@ -693,9 +690,9 @@ typedef struct ChnlAccessSetting {
u16 EIFS_Timer;
u16 CWminIndex;
u16 CWmaxIndex;
-}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
+} *PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
-typedef struct _BB_REGISTER_DEFINITION{
+typedef struct _BB_REGISTER_DEFINITION {
/* set software control: 0x870~0x877[8 bytes] */
u32 rfintfs;
/* readback data: 0x8e0~0x8e7[8 bytes] */
@@ -740,15 +737,15 @@ typedef struct _BB_REGISTER_DEFINITION{
u32 rfTxAFE;
/* LSSI RF readback data: 0x8a0~0x8af [16 bytes] */
u32 rfLSSIReadBack;
-}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
+} BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
-typedef enum _RT_RF_TYPE_819xU{
+typedef enum _RT_RF_TYPE_819xU {
RF_TYPE_MIN = 0,
RF_8225,
RF_8256,
RF_8258,
RF_PSEUDO_11N = 4,
-}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
+} RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
typedef struct _rate_adaptive {
u8 rate_adaptive_disabled;
@@ -810,7 +807,7 @@ typedef struct _phy_ofdm_rx_status_report_819xusb {
u8 max_ex_pwr;
u8 sgi_en;
u8 rxsc_sgien_exflg;
-}phy_sts_ofdm_819xusb_t;
+} phy_sts_ofdm_819xusb_t;
typedef struct _phy_cck_rx_status_report_819xusb {
/* For CCK rate descriptor. This is an unsigned 8:1 variable.
@@ -819,18 +816,17 @@ typedef struct _phy_cck_rx_status_report_819xusb {
u8 adc_pwdb_X[4];
u8 sq_rpt;
u8 cck_agc_rpt;
-}phy_sts_cck_819xusb_t;
+} phy_sts_cck_819xusb_t;
-typedef struct _phy_ofdm_rx_status_rxsc_sgien_exintfflag{
+typedef struct _phy_ofdm_rx_status_rxsc_sgien_exintfflag {
u8 reserved:4;
u8 rxsc:2;
u8 sgi_en:1;
u8 ex_intf_flag:1;
-}phy_ofdm_rx_status_rxsc_sgien_exintfflag;
+} phy_ofdm_rx_status_rxsc_sgien_exintfflag;
-typedef enum _RT_CUSTOMER_ID
-{
+typedef enum _RT_CUSTOMER_ID {
RT_CID_DEFAULT = 0,
RT_CID_8187_ALPHA0 = 1,
RT_CID_8187_SERCOMM_PS = 2,
@@ -845,7 +841,7 @@ typedef enum _RT_CUSTOMER_ID
RT_CID_Nettronix = 11,
RT_CID_DLINK = 12,
RT_CID_PRONET = 13,
-}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
+} RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
/*
* ==========================================================================
@@ -853,7 +849,7 @@ typedef enum _RT_CUSTOMER_ID
* ==========================================================================
*/
-typedef enum _LED_STRATEGY_8190{
+typedef enum _LED_STRATEGY_8190 {
SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
SW_LED_MODE1, /* SW control for PCI Express */
SW_LED_MODE2, /* SW control for Cameo. */
@@ -861,7 +857,7 @@ typedef enum _LED_STRATEGY_8190{
SW_LED_MODE4, /* SW control for Netcore. */
/* HW control 2 LEDs, LED0 and LED1 (4 different control modes) */
HW_LED,
-}LED_STRATEGY_8190, *PLED_STRATEGY_8190;
+} LED_STRATEGY_8190, *PLED_STRATEGY_8190;
typedef enum _RESET_TYPE {
RESET_TYPE_NORESET = 0x00,
@@ -870,7 +866,7 @@ typedef enum _RESET_TYPE {
} RESET_TYPE;
/* The simple tx command OP code. */
-typedef enum _tag_TxCmd_Config_Index{
+typedef enum _tag_TxCmd_Config_Index {
TXCMD_TXRA_HISTORY_CTRL = 0xFF900000,
TXCMD_RESET_TX_PKT_BUFF = 0xFF900001,
TXCMD_RESET_RX_PKT_BUFF = 0xFF900002,
@@ -878,7 +874,7 @@ typedef enum _tag_TxCmd_Config_Index{
TXCMD_SET_RX_RSSI = 0xFF900004,
TXCMD_SET_TX_PWR_TRACKING = 0xFF900005,
TXCMD_XXXX_CTRL,
-}DCMD_TXCMD_OP;
+} DCMD_TXCMD_OP;
typedef struct r8192_priv {
struct usb_device *udev;
@@ -899,7 +895,9 @@ typedef struct r8192_priv {
/* If TCR reports card V B/C, this discriminates */
u8 card_8192_version;
short enable_gpio0;
- enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
+ enum card_type {
+ PCI, MINIPCI, CARDBUS, USB
+ } card_type;
short hw_plcp_len;
short plcp_preamble_mode;
@@ -1130,7 +1128,7 @@ typedef struct r8192_priv {
struct delayed_work gpio_change_rf_wq;
struct delayed_work initialgain_operate_wq;
struct workqueue_struct *priv_wq;
-}r8192_priv;
+} r8192_priv;
/* For rtl8187B */
typedef enum{
@@ -1151,11 +1149,11 @@ typedef enum{
UART_PRIORITY
} priority_t;
-typedef enum{
+typedef enum {
NIC_8192U = 1,
NIC_8190P = 2,
NIC_8192E = 3,
- } nic_t;
+} nic_t;
#ifdef JOHN_HWSEC
--
1.7.10.4
More information about the devel
mailing list