[PATCH 08/48] staging: comedi: pcmmio: tidy up the ai subdevice init

H Hartley Sweeten hsweeten at visionengravers.com
Mon Dec 9 22:30:44 UTC 2013


Add some whitespace to the ai subdevice init and reorder it a bit
to follow the "norm" in comedi drivers.

Remove the init of s->len_chanlist. This member is only used with
subdevices that support async commands. The core will default the
value correctly..

The ai subdevice only uses the s->private member to pass the iobase
to the analog input registers. It's just a copy of the dev->iobase,
use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
 drivers/staging/comedi/drivers/pcmmio.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 52f1085..704911c 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -99,6 +99,7 @@ Configuration Options:
 #define PCMMIO_AI_STATUS_REG_SEL	(1 << 3)
 #define PCMMIO_AI_STATUS_CMD_DRQ_ENA	(1 << 1)
 #define PCMMIO_AI_STATUS_IRQ_ENA	(1 << 0)
+#define PCMMIO_AI_RESOURCE_REG		0x03
 #define PCMMIO_AI_2ND_ADC_OFFSET	0x04
 
 /* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
@@ -790,7 +791,7 @@ static int pcmmio_ai_insn_read(struct comedi_device *dev,
 			       struct comedi_insn *insn,
 			       unsigned int *data)
 {
-	unsigned long iobase = subpriv->iobase;
+	unsigned long iobase = dev->iobase;
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned int range = CR_RANGE(insn->chanspec);
 	unsigned int aref = CR_AREF(insn->chanspec);
@@ -974,20 +975,19 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (ret)
 		return ret;
 
-	/* First, AI */
+	/* Analog Input subdevice */
 	s = &dev->subdevices[0];
-	s->private = &devpriv->sprivs[0];
-	s->maxdata = 0xffff;
-	s->range_table = &pcmmio_ai_ranges;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
-	s->type = COMEDI_SUBD_AI;
-	s->n_chan = 16;
-	s->len_chanlist = s->n_chan;
-	s->insn_read = pcmmio_ai_insn_read;
-	subpriv->iobase = dev->iobase + 0;
+	s->type		= COMEDI_SUBD_AI;
+	s->subdev_flags	= SDF_READABLE | SDF_GROUND | SDF_DIFF;
+	s->n_chan	= 16;
+	s->maxdata	= 0xffff;
+	s->range_table	= &pcmmio_ai_ranges;
+	s->insn_read	= pcmmio_ai_insn_read;
+
 	/* initialize the resource enable register by clearing it */
-	outb(0, subpriv->iobase + 3);
-	outb(0, subpriv->iobase + 4 + 3);
+	outb(0, dev->iobase + PCMMIO_AI_RESOURCE_REG);
+	outb(0,
+	     dev->iobase + PCMMIO_AI_2ND_ADC_OFFSET + PCMMIO_AI_RESOURCE_REG);
 
 	/* Next, AO */
 	s = &dev->subdevices[1];
-- 
1.8.4.4



More information about the devel mailing list