[RFC/RFT 12/33] staging: r8188eu: Add files for new driver - part 12

Larry Finger Larry.Finger at lwfinger.net
Thu Aug 22 03:33:54 UTC 2013


This commit adds files odm_HWConfig.c and odm_interface.c.

Signed-off-by: Larry Finger <Larry.Finger at lwfinger.net>
---
 drivers/staging/rtl8188eu/hal/odm_HWConfig.c  | 596 ++++++++++++++++++++++++++
 drivers/staging/rtl8188eu/hal/odm_interface.c | 203 +++++++++
 2 files changed, 799 insertions(+)
 create mode 100644 drivers/staging/rtl8188eu/hal/odm_HWConfig.c
 create mode 100644 drivers/staging/rtl8188eu/hal/odm_interface.c

diff --git a/drivers/staging/rtl8188eu/hal/odm_HWConfig.c b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
new file mode 100644
index 0000000..19c509a
--- /dev/null
+++ b/drivers/staging/rtl8188eu/hal/odm_HWConfig.c
@@ -0,0 +1,596 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+/*  include files */
+
+#include "odm_precomp.h"
+
+#define READ_AND_CONFIG     READ_AND_CONFIG_MP
+
+#define READ_AND_CONFIG_MP(ic, txt) (ODM_ReadAndConfig##txt##ic(dm_odm))
+#define READ_AND_CONFIG_TC(ic, txt) (ODM_ReadAndConfig_TC##txt##ic(dm_odm))
+
+static u8 odm_QueryRxPwrPercentage(s8 AntPower)
+{
+	if ((AntPower <= -100) || (AntPower >= 20))
+		return	0;
+	else if (AntPower >= 0)
+		return	100;
+	else
+		return 100+AntPower;
+}
+
+/*  2012/01/12 MH MOve some signal strength smooth method to MP HAL layer. */
+/*  IF other SW team do not support the feature, remove this section.?? */
+static s32 odm_sig_patch_lenove(struct odm_dm_struct *dm_odm, s32 CurrSig)
+{
+	return 0;
+}
+
+static s32 odm_sig_patch_netcore(struct odm_dm_struct *dm_odm, s32 CurrSig)
+{
+	return 0;
+}
+
+static s32 odm_SignalScaleMapping_92CSeries(struct odm_dm_struct *dm_odm, s32 CurrSig)
+{
+	s32 RetSig = 0;
+
+	if ((dm_odm->SupportInterface  == ODM_ITRF_USB) ||
+	    (dm_odm->SupportInterface  == ODM_ITRF_SDIO)) {
+		if (CurrSig >= 51 && CurrSig <= 100)
+			RetSig = 100;
+		else if (CurrSig >= 41 && CurrSig <= 50)
+			RetSig = 80 + ((CurrSig - 40)*2);
+		else if (CurrSig >= 31 && CurrSig <= 40)
+			RetSig = 66 + (CurrSig - 30);
+		else if (CurrSig >= 21 && CurrSig <= 30)
+			RetSig = 54 + (CurrSig - 20);
+		else if (CurrSig >= 10 && CurrSig <= 20)
+			RetSig = 42 + (((CurrSig - 10) * 2) / 3);
+		else if (CurrSig >= 5 && CurrSig <= 9)
+			RetSig = 22 + (((CurrSig - 5) * 3) / 2);
+		else if (CurrSig >= 1 && CurrSig <= 4)
+			RetSig = 6 + (((CurrSig - 1) * 3) / 2);
+		else
+			RetSig = CurrSig;
+	}
+	return RetSig;
+}
+
+static s32 odm_SignalScaleMapping(struct odm_dm_struct *dm_odm, s32 CurrSig)
+{
+	if ((dm_odm->SupportPlatform == ODM_MP) &&
+	    (dm_odm->SupportInterface != ODM_ITRF_PCIE) && /* USB & SDIO */
+	    (dm_odm->PatchID == 10))
+		return odm_sig_patch_netcore(dm_odm, CurrSig);
+	else if ((dm_odm->SupportPlatform == ODM_MP) &&
+		 (dm_odm->SupportInterface == ODM_ITRF_PCIE) &&
+		 (dm_odm->PatchID == 19))
+		return odm_sig_patch_lenove(dm_odm, CurrSig);
+	else
+		return odm_SignalScaleMapping_92CSeries(dm_odm, CurrSig);
+}
+
+/* pMgntInfo->CustomerID == RT_CID_819x_Lenovo */
+static u8 odm_SQ_process_patch_RT_CID_819x_Lenovo(struct odm_dm_struct *dm_odm,
+	u8 isCCKrate, u8 PWDB_ALL, u8 path, u8 RSSI)
+{
+	return 0;
+}
+
+static u8 odm_EVMdbToPercentage(s8 Value)
+{
+	/*  -33dB~0dB to 0%~99% */
+	s8 ret_val;
+
+	ret_val = Value;
+
+	if (ret_val >= 0)
+		ret_val = 0;
+	if (ret_val <= -33)
+		ret_val = -33;
+
+	ret_val = 0 - ret_val;
+	ret_val *= 3;
+
+	if (ret_val == 99)
+		ret_val = 100;
+	return ret_val;
+}
+
+static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
+			struct odm_phy_status_info *pPhyInfo,
+			u8 *pPhyStatus,
+			struct odm_per_pkt_info *pPktinfo)
+{
+	struct sw_ant_switch *pDM_SWAT_Table = &dm_odm->DM_SWAT_Table;
+	u8 i, Max_spatial_stream;
+	s8 rx_pwr[4], rx_pwr_all = 0;
+	u8 EVM, PWDB_ALL = 0, PWDB_ALL_BT;
+	u8 RSSI, total_rssi = 0;
+	u8 isCCKrate = 0;
+	u8 rf_rx_num = 0;
+	u8 cck_highpwr = 0;
+	u8 LNA_idx, VGA_idx;
+
+	struct phy_status_rpt *pPhyStaRpt = (struct phy_status_rpt *)pPhyStatus;
+
+	isCCKrate = ((pPktinfo->Rate >= DESC92C_RATE1M) && (pPktinfo->Rate <= DESC92C_RATE11M)) ? true : false;
+
+	pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = -1;
+	pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
+
+	if (isCCKrate) {
+		u8 report;
+		u8 cck_agc_rpt;
+
+		dm_odm->PhyDbgInfo.NumQryPhyStatusCCK++;
+		/*  (1)Hardware does not provide RSSI for CCK */
+		/*  (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */
+
+		cck_highpwr = dm_odm->bCckHighPower;
+
+		cck_agc_rpt =  pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a ;
+
+		/* 2011.11.28 LukeLee: 88E use different LNA & VGA gain table */
+		/* The RSSI formula should be modified according to the gain table */
+		/* In 88E, cck_highpwr is always set to 1 */
+		if (dm_odm->SupportICType & (ODM_RTL8188E|ODM_RTL8812)) {
+			LNA_idx = ((cck_agc_rpt & 0xE0) >> 5);
+			VGA_idx = (cck_agc_rpt & 0x1F);
+			switch (LNA_idx) {
+			case 7:
+				if (VGA_idx <= 27)
+					rx_pwr_all = -100 + 2*(27-VGA_idx); /* VGA_idx = 27~2 */
+				else
+					rx_pwr_all = -100;
+				break;
+			case 6:
+				rx_pwr_all = -48 + 2*(2-VGA_idx); /* VGA_idx = 2~0 */
+				break;
+			case 5:
+				rx_pwr_all = -42 + 2*(7-VGA_idx); /* VGA_idx = 7~5 */
+				break;
+			case 4:
+				rx_pwr_all = -36 + 2*(7-VGA_idx); /* VGA_idx = 7~4 */
+				break;
+			case 3:
+				rx_pwr_all = -24 + 2*(7-VGA_idx); /* VGA_idx = 7~0 */
+				break;
+			case 2:
+				if (cck_highpwr)
+					rx_pwr_all = -12 + 2*(5-VGA_idx); /* VGA_idx = 5~0 */
+				else
+					rx_pwr_all = -6 + 2*(5-VGA_idx);
+				break;
+			case 1:
+					rx_pwr_all = 8-2*VGA_idx;
+				break;
+			case 0:
+					rx_pwr_all = 14-2*VGA_idx;
+				break;
+			default:
+				break;
+			}
+			rx_pwr_all += 6;
+			PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
+			if (!cck_highpwr) {
+				if (PWDB_ALL >= 80)
+					PWDB_ALL = ((PWDB_ALL-80)<<1)+((PWDB_ALL-80)>>1)+80;
+				else if ((PWDB_ALL <= 78) && (PWDB_ALL >= 20))
+					PWDB_ALL += 3;
+				if (PWDB_ALL > 100)
+					PWDB_ALL = 100;
+			}
+		} else {
+			if (!cck_highpwr) {
+				report = (cck_agc_rpt & 0xc0)>>6;
+				switch (report) {
+				/*  03312009 modified by cosa */
+				/*  Modify the RF RNA gain value to -40, -20, -2, 14 by Jenyu's suggestion */
+				/*  Note: different RF with the different RNA gain. */
+				case 0x3:
+					rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
+					break;
+				case 0x2:
+					rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
+					break;
+				case 0x1:
+					rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
+					break;
+				case 0x0:
+					rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
+					break;
+				}
+			} else {
+				report = (cck_agc_rpt & 0x60)>>5;
+				switch (report) {
+				case 0x3:
+					rx_pwr_all = -46 - ((cck_agc_rpt & 0x1f)<<1) ;
+					break;
+				case 0x2:
+					rx_pwr_all = -26 - ((cck_agc_rpt & 0x1f)<<1);
+					break;
+				case 0x1:
+					rx_pwr_all = -12 - ((cck_agc_rpt & 0x1f)<<1);
+					break;
+				case 0x0:
+					rx_pwr_all = 16 - ((cck_agc_rpt & 0x1f)<<1);
+					break;
+				}
+			}
+
+			PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
+
+			/* Modification for ext-LNA board */
+			if (dm_odm->BoardType == ODM_BOARD_HIGHPWR) {
+				if ((cck_agc_rpt>>7) == 0) {
+					PWDB_ALL = (PWDB_ALL > 94) ? 100 : (PWDB_ALL+6);
+				} else {
+					if (PWDB_ALL > 38)
+						PWDB_ALL -= 16;
+					else
+						PWDB_ALL = (PWDB_ALL <= 16) ? (PWDB_ALL>>2) : (PWDB_ALL-12);
+				}
+
+				/* CCK modification */
+				if (PWDB_ALL > 25 && PWDB_ALL <= 60)
+					PWDB_ALL += 6;
+			} else {/* Modification for int-LNA board */
+				if (PWDB_ALL > 99)
+					PWDB_ALL -= 8;
+				else if (PWDB_ALL > 50 && PWDB_ALL <= 68)
+					PWDB_ALL += 4;
+			}
+		}
+
+		pPhyInfo->RxPWDBAll = PWDB_ALL;
+		pPhyInfo->BTRxRSSIPercentage = PWDB_ALL;
+		pPhyInfo->RecvSignalPower = rx_pwr_all;
+		/*  (3) Get Signal Quality (EVM) */
+		if (pPktinfo->bPacketMatchBSSID) {
+			u8 SQ, SQ_rpt;
+
+			if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
+				SQ = odm_SQ_process_patch_RT_CID_819x_Lenovo(dm_odm, isCCKrate, PWDB_ALL, 0, 0);
+			} else if (pPhyInfo->RxPWDBAll > 40 && !dm_odm->bInHctTest) {
+				SQ = 100;
+			} else {
+				SQ_rpt = pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all;
+
+				if (SQ_rpt > 64)
+					SQ = 0;
+				else if (SQ_rpt < 20)
+					SQ = 100;
+				else
+					SQ = ((64-SQ_rpt) * 100) / 44;
+			}
+			pPhyInfo->SignalQuality = SQ;
+			pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = SQ;
+			pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
+		}
+	} else { /* is OFDM rate */
+		dm_odm->PhyDbgInfo.NumQryPhyStatusOFDM++;
+
+		/*  (1)Get RSSI for HT rate */
+
+		 for (i = ODM_RF_PATH_A; i < ODM_RF_PATH_MAX; i++) {
+			/*  2008/01/30 MH we will judge RF RX path now. */
+			if (dm_odm->RFPathRxEnable & BIT(i))
+				rf_rx_num++;
+
+			rx_pwr[i] = ((pPhyStaRpt->path_agc[i].gain & 0x3F)*2) - 110;
+
+			pPhyInfo->RxPwr[i] = rx_pwr[i];
+
+			/* Translate DBM to percentage. */
+			RSSI = odm_QueryRxPwrPercentage(rx_pwr[i]);
+			total_rssi += RSSI;
+
+			/* Modification for ext-LNA board */
+			if (dm_odm->BoardType == ODM_BOARD_HIGHPWR) {
+				if ((pPhyStaRpt->path_agc[i].trsw) == 1)
+					RSSI = (RSSI > 94) ? 100 : (RSSI + 6);
+				else
+					RSSI = (RSSI <= 16) ? (RSSI >> 3) : (RSSI - 16);
+
+				if ((RSSI <= 34) && (RSSI >= 4))
+					RSSI -= 4;
+			}
+
+			pPhyInfo->RxMIMOSignalStrength[i] = (u8)RSSI;
+
+			/* Get Rx snr value in DB */
+			pPhyInfo->RxSNR[i] = (s32)(pPhyStaRpt->path_rxsnr[i]/2);
+			dm_odm->PhyDbgInfo.RxSNRdB[i] = (s32)(pPhyStaRpt->path_rxsnr[i]/2);
+
+			/* Record Signal Strength for next packet */
+			if (pPktinfo->bPacketMatchBSSID) {
+				if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
+					if (i == ODM_RF_PATH_A)
+						pPhyInfo->SignalQuality = odm_SQ_process_patch_RT_CID_819x_Lenovo(dm_odm, isCCKrate, PWDB_ALL, i, RSSI);
+				}
+			}
+		}
+		/*  (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) */
+		rx_pwr_all = (((pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all) >> 1) & 0x7f) - 110;
+
+		PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
+		PWDB_ALL_BT = PWDB_ALL;
+
+		pPhyInfo->RxPWDBAll = PWDB_ALL;
+		pPhyInfo->BTRxRSSIPercentage = PWDB_ALL_BT;
+		pPhyInfo->RxPower = rx_pwr_all;
+		pPhyInfo->RecvSignalPower = rx_pwr_all;
+
+		if ((dm_odm->SupportPlatform == ODM_MP) && (dm_odm->PatchID == 19)) {
+			/* do nothing */
+		} else {
+			/*  (3)EVM of HT rate */
+			if (pPktinfo->Rate >= DESC92C_RATEMCS8 && pPktinfo->Rate <= DESC92C_RATEMCS15)
+				Max_spatial_stream = 2; /* both spatial stream make sense */
+			else
+				Max_spatial_stream = 1; /* only spatial stream 1 makes sense */
+
+			for (i = 0; i < Max_spatial_stream; i++) {
+				/*  Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment */
+				/*  fill most significant bit to "zero" when doing shifting operation which may change a negative */
+				/*  value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore. */
+				EVM = odm_EVMdbToPercentage((pPhyStaRpt->stream_rxevm[i]));	/* dbm */
+
+				if (pPktinfo->bPacketMatchBSSID) {
+					if (i == ODM_RF_PATH_A) /*  Fill value in RFD, Get the first spatial stream only */
+						pPhyInfo->SignalQuality = (u8)(EVM & 0xff);
+					pPhyInfo->RxMIMOSignalQuality[i] = (u8)(EVM & 0xff);
+				}
+			}
+		}
+	}
+	/* UI BSS List signal strength(in percentage), make it good looking, from 0~100. */
+	/* It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp(). */
+	if (isCCKrate) {
+		pPhyInfo->SignalStrength = (u8)(odm_SignalScaleMapping(dm_odm, PWDB_ALL));/* PWDB_ALL; */
+	} else {
+		if (rf_rx_num != 0)
+			pPhyInfo->SignalStrength = (u8)(odm_SignalScaleMapping(dm_odm, total_rssi /= rf_rx_num));
+	}
+
+	/* For 92C/92D HW (Hybrid) Antenna Diversity */
+	pDM_SWAT_Table->antsel = pPhyStaRpt->ant_sel;
+	/* For 88E HW Antenna Diversity */
+	dm_odm->DM_FatTable.antsel_rx_keep_0 = pPhyStaRpt->ant_sel;
+	dm_odm->DM_FatTable.antsel_rx_keep_1 = pPhyStaRpt->ant_sel_b;
+	dm_odm->DM_FatTable.antsel_rx_keep_2 = pPhyStaRpt->antsel_rx_keep_2;
+}
+
+void odm_Init_RSSIForDM(struct odm_dm_struct *dm_odm)
+{
+}
+
+static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
+				  struct odm_phy_status_info *pPhyInfo,
+				  struct odm_per_pkt_info *pPktinfo)
+{
+	s32 UndecoratedSmoothedPWDB, UndecoratedSmoothedCCK;
+	s32 UndecoratedSmoothedOFDM, RSSI_Ave;
+	u8 isCCKrate = 0;
+	u8 RSSI_max, RSSI_min, i;
+	u32 OFDM_pkt = 0;
+	u32 Weighting = 0;
+	struct sta_info *pEntry;
+
+	if (pPktinfo->StationID == 0xFF)
+		return;
+	pEntry = dm_odm->pODM_StaInfo[pPktinfo->StationID];
+	if (!IS_STA_VALID(pEntry))
+		return;
+	if ((!pPktinfo->bPacketMatchBSSID))
+		return;
+
+	isCCKrate = ((pPktinfo->Rate >= DESC92C_RATE1M) && (pPktinfo->Rate <= DESC92C_RATE11M)) ? true : false;
+
+	/* Smart Antenna Debug Message------------------  */
+	if (dm_odm->SupportICType == ODM_RTL8188E) {
+		u8 antsel_tr_mux;
+		struct fast_ant_train *pDM_FatTable = &dm_odm->DM_FatTable;
+
+		if (dm_odm->AntDivType == CG_TRX_SMART_ANTDIV) {
+			if (pDM_FatTable->FAT_State == FAT_TRAINING_STATE) {
+				if (pPktinfo->bPacketToSelf) {
+					antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2<<2) |
+							(pDM_FatTable->antsel_rx_keep_1<<1) |
+							pDM_FatTable->antsel_rx_keep_0;
+					pDM_FatTable->antSumRSSI[antsel_tr_mux] += pPhyInfo->RxPWDBAll;
+					pDM_FatTable->antRSSIcnt[antsel_tr_mux]++;
+				}
+			}
+		} else if ((dm_odm->AntDivType == CG_TRX_HW_ANTDIV) || (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV)) {
+			if (pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon) {
+				antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2<<2) |
+						(pDM_FatTable->antsel_rx_keep_1<<1) | pDM_FatTable->antsel_rx_keep_0;
+				ODM_AntselStatistics_88E(dm_odm, antsel_tr_mux, pPktinfo->StationID, pPhyInfo->RxPWDBAll);
+			}
+		}
+	}
+	/* Smart Antenna Debug Message------------------ */
+
+	UndecoratedSmoothedCCK =  pEntry->rssi_stat.UndecoratedSmoothedCCK;
+	UndecoratedSmoothedOFDM = pEntry->rssi_stat.UndecoratedSmoothedOFDM;
+	UndecoratedSmoothedPWDB = pEntry->rssi_stat.UndecoratedSmoothedPWDB;
+
+	if (pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon) {
+		if (!isCCKrate) { /* ofdm rate */
+			if (pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B] == 0) {
+				RSSI_Ave = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
+			} else {
+				if (pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A] > pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B]) {
+					RSSI_max = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
+					RSSI_min = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B];
+				} else {
+					RSSI_max = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B];
+					RSSI_min = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
+				}
+				if ((RSSI_max - RSSI_min) < 3)
+					RSSI_Ave = RSSI_max;
+				else if ((RSSI_max - RSSI_min) < 6)
+					RSSI_Ave = RSSI_max - 1;
+				else if ((RSSI_max - RSSI_min) < 10)
+					RSSI_Ave = RSSI_max - 2;
+				else
+					RSSI_Ave = RSSI_max - 3;
+			}
+
+			/* 1 Process OFDM RSSI */
+			if (UndecoratedSmoothedOFDM <= 0) {	/*  initialize */
+				UndecoratedSmoothedOFDM = pPhyInfo->RxPWDBAll;
+			} else {
+				if (pPhyInfo->RxPWDBAll > (u32)UndecoratedSmoothedOFDM) {
+					UndecoratedSmoothedOFDM =
+							(((UndecoratedSmoothedOFDM)*(Rx_Smooth_Factor-1)) +
+							(RSSI_Ave)) / (Rx_Smooth_Factor);
+					UndecoratedSmoothedOFDM = UndecoratedSmoothedOFDM + 1;
+				} else {
+					UndecoratedSmoothedOFDM =
+							(((UndecoratedSmoothedOFDM)*(Rx_Smooth_Factor-1)) +
+							(RSSI_Ave)) / (Rx_Smooth_Factor);
+				}
+			}
+
+			pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap<<1) | BIT0;
+
+		} else {
+			RSSI_Ave = pPhyInfo->RxPWDBAll;
+
+			/* 1 Process CCK RSSI */
+			if (UndecoratedSmoothedCCK <= 0) {	/*  initialize */
+				UndecoratedSmoothedCCK = pPhyInfo->RxPWDBAll;
+			} else {
+				if (pPhyInfo->RxPWDBAll > (u32)UndecoratedSmoothedCCK) {
+					UndecoratedSmoothedCCK =
+							((UndecoratedSmoothedCCK * (Rx_Smooth_Factor-1)) +
+							pPhyInfo->RxPWDBAll) / Rx_Smooth_Factor;
+					UndecoratedSmoothedCCK = UndecoratedSmoothedCCK + 1;
+				} else {
+					UndecoratedSmoothedCCK =
+							((UndecoratedSmoothedCCK * (Rx_Smooth_Factor-1)) +
+							pPhyInfo->RxPWDBAll) / Rx_Smooth_Factor;
+				}
+			}
+			pEntry->rssi_stat.PacketMap = pEntry->rssi_stat.PacketMap<<1;
+		}
+		/* 2011.07.28 LukeLee: modified to prevent unstable CCK RSSI */
+		if (pEntry->rssi_stat.ValidBit >= 64)
+			pEntry->rssi_stat.ValidBit = 64;
+		else
+			pEntry->rssi_stat.ValidBit++;
+
+		for (i = 0; i < pEntry->rssi_stat.ValidBit; i++)
+			OFDM_pkt += (u8)(pEntry->rssi_stat.PacketMap>>i)&BIT0;
+
+		if (pEntry->rssi_stat.ValidBit == 64) {
+			Weighting = ((OFDM_pkt<<4) > 64) ? 64 : (OFDM_pkt<<4);
+			UndecoratedSmoothedPWDB = (Weighting*UndecoratedSmoothedOFDM+(64-Weighting)*UndecoratedSmoothedCCK)>>6;
+		} else {
+			if (pEntry->rssi_stat.ValidBit != 0)
+				UndecoratedSmoothedPWDB = (OFDM_pkt * UndecoratedSmoothedOFDM +
+							  (pEntry->rssi_stat.ValidBit-OFDM_pkt) *
+							  UndecoratedSmoothedCCK)/pEntry->rssi_stat.ValidBit;
+			else
+				UndecoratedSmoothedPWDB = 0;
+		}
+		pEntry->rssi_stat.UndecoratedSmoothedCCK = UndecoratedSmoothedCCK;
+		pEntry->rssi_stat.UndecoratedSmoothedOFDM = UndecoratedSmoothedOFDM;
+		pEntry->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
+	}
+}
+
+/*  Endianness before calling this API */
+static void ODM_PhyStatusQuery_92CSeries(struct odm_dm_struct *dm_odm,
+					 struct odm_phy_status_info *pPhyInfo,
+					 u8 *pPhyStatus,
+					 struct odm_per_pkt_info *pPktinfo)
+{
+	odm_RxPhyStatus92CSeries_Parsing(dm_odm, pPhyInfo, pPhyStatus,
+					 pPktinfo);
+	if (dm_odm->RSSI_test) {
+		/*  Select the packets to do RSSI checking for antenna switching. */
+		if (pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon)
+				ODM_SwAntDivChkPerPktRssi(dm_odm, pPktinfo->StationID, pPhyInfo);
+	} else {
+		odm_Process_RSSIForDM(dm_odm, pPhyInfo, pPktinfo);
+	}
+}
+
+void ODM_PhyStatusQuery(struct odm_dm_struct *dm_odm,
+			struct odm_phy_status_info *pPhyInfo,
+			u8 *pPhyStatus, struct odm_per_pkt_info *pPktinfo)
+{
+	ODM_PhyStatusQuery_92CSeries(dm_odm, pPhyInfo, pPhyStatus, pPktinfo);
+}
+
+/*  For future use. */
+void ODM_MacStatusQuery(struct odm_dm_struct *dm_odm, u8 *mac_stat,
+			u8 macid, bool pkt_match_bssid,
+			bool pkttoself, bool pkt_beacon)
+{
+	/*  2011/10/19 Driver team will handle in the future. */
+}
+
+enum HAL_STATUS ODM_ConfigRFWithHeaderFile(struct odm_dm_struct *dm_odm,
+					   enum ODM_RF_RADIO_PATH content,
+					   enum ODM_RF_RADIO_PATH rfpath)
+{
+	ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_LOUD, ("===>ODM_ConfigRFWithHeaderFile\n"));
+	if (dm_odm->SupportICType == ODM_RTL8188E) {
+		if (rfpath == ODM_RF_PATH_A)
+			READ_AND_CONFIG(8188E, _RadioA_1T_);
+		ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_LOUD, (" ===> ODM_ConfigRFWithHeaderFile() Radio_A:Rtl8188ERadioA_1TArray\n"));
+		ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_LOUD, (" ===> ODM_ConfigRFWithHeaderFile() Radio_B:Rtl8188ERadioB_1TArray\n"));
+	}
+
+	ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_TRACE, ("ODM_ConfigRFWithHeaderFile: Radio No %x\n", rfpath));
+	return HAL_STATUS_SUCCESS;
+}
+
+enum HAL_STATUS ODM_ConfigBBWithHeaderFile(struct odm_dm_struct *dm_odm,
+					   enum odm_bb_config_type config_tp)
+{
+	if (dm_odm->SupportICType == ODM_RTL8188E) {
+		if (config_tp == CONFIG_BB_PHY_REG) {
+			READ_AND_CONFIG(8188E, _PHY_REG_1T_);
+		} else if (config_tp == CONFIG_BB_AGC_TAB) {
+			READ_AND_CONFIG(8188E, _AGC_TAB_1T_);
+		} else if (config_tp == CONFIG_BB_PHY_REG_PG) {
+			READ_AND_CONFIG(8188E, _PHY_REG_PG_);
+			ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_LOUD,
+				     (" ===> phy_ConfigBBWithHeaderFile() agc:Rtl8188EPHY_REG_PGArray\n"));
+		}
+	}
+	return HAL_STATUS_SUCCESS;
+}
+
+enum HAL_STATUS ODM_ConfigMACWithHeaderFile(struct odm_dm_struct *dm_odm)
+{
+	u8 result = HAL_STATUS_SUCCESS;
+	if (dm_odm->SupportICType == ODM_RTL8188E)
+		result = READ_AND_CONFIG(8188E, _MAC_REG_);
+	return result;
+}
diff --git a/drivers/staging/rtl8188eu/hal/odm_interface.c b/drivers/staging/rtl8188eu/hal/odm_interface.c
new file mode 100644
index 0000000..59ad5bf
--- /dev/null
+++ b/drivers/staging/rtl8188eu/hal/odm_interface.c
@@ -0,0 +1,203 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#include "odm_precomp.h"
+/*  ODM IO Relative API. */
+
+u8 ODM_Read1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return rtw_read8(Adapter, RegAddr);
+}
+
+u16 ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return rtw_read16(Adapter, RegAddr);
+}
+
+u32 ODM_Read4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return rtw_read32(Adapter, RegAddr);
+}
+
+void ODM_Write1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u8 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	rtw_write8(Adapter, RegAddr, Data);
+}
+
+void ODM_Write2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u16 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	rtw_write16(Adapter, RegAddr, Data);
+}
+
+void ODM_Write4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	rtw_write32(Adapter, RegAddr, Data);
+}
+
+void ODM_SetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask, u32 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	PHY_SetBBReg(Adapter, RegAddr, BitMask, Data);
+}
+
+u32 ODM_GetMACReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return PHY_QueryBBReg(Adapter, RegAddr, BitMask);
+}
+
+void ODM_SetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask, u32 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	PHY_SetBBReg(Adapter, RegAddr, BitMask, Data);
+}
+
+u32 ODM_GetBBReg(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u32 BitMask)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return PHY_QueryBBReg(Adapter, RegAddr, BitMask);
+}
+
+void ODM_SetRFReg(struct odm_dm_struct *pDM_Odm, enum ODM_RF_RADIO_PATH	eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	PHY_SetRFReg(Adapter, (enum rf_radio_path)eRFPath, RegAddr, BitMask, Data);
+}
+
+u32 ODM_GetRFReg(struct odm_dm_struct *pDM_Odm, enum ODM_RF_RADIO_PATH	eRFPath, u32 RegAddr, u32 BitMask)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	return PHY_QueryRFReg(Adapter, (enum rf_radio_path)eRFPath, RegAddr, BitMask);
+}
+
+/*  ODM Memory relative API. */
+void ODM_AllocateMemory(struct odm_dm_struct *pDM_Odm, void **pPtr, u32 length)
+{
+	*pPtr = rtw_zvmalloc(length);
+}
+
+/*  length could be ignored, used to detect memory leakage. */
+void ODM_FreeMemory(struct odm_dm_struct *pDM_Odm, void *pPtr, u32 length)
+{
+	rtw_vmfree(pPtr, length);
+}
+
+s32 ODM_CompareMemory(struct odm_dm_struct *pDM_Odm, void *pBuf1, void *pBuf2, u32 length)
+{
+	return _rtw_memcmp(pBuf1, pBuf2, length);
+}
+
+/*  ODM MISC relative API. */
+void ODM_AcquireSpinLock(struct odm_dm_struct *pDM_Odm, enum RT_SPINLOCK_TYPE type)
+{
+}
+
+void ODM_ReleaseSpinLock(struct odm_dm_struct *pDM_Odm, enum RT_SPINLOCK_TYPE type)
+{
+}
+
+/*  Work item relative API. FOr MP driver only~! */
+void ODM_InitializeWorkItem(struct odm_dm_struct *pDM_Odm, void *pRtWorkItem,
+			    RT_WORKITEM_CALL_BACK RtWorkItemCallback,
+			    void *pContext, const char *szID)
+{
+}
+
+void ODM_StartWorkItem(void *pRtWorkItem)
+{
+}
+
+void ODM_StopWorkItem(void *pRtWorkItem)
+{
+}
+
+void ODM_FreeWorkItem(void *pRtWorkItem)
+{
+}
+
+void ODM_ScheduleWorkItem(void *pRtWorkItem)
+{
+}
+
+void ODM_IsWorkItemScheduled(void *pRtWorkItem)
+{
+}
+
+/*  ODM Timer relative API. */
+void ODM_StallExecution(u32 usDelay)
+{
+	rtw_udelay_os(usDelay);
+}
+
+void ODM_delay_ms(u32 ms)
+{
+	rtw_mdelay_os(ms);
+}
+
+void ODM_delay_us(u32 us)
+{
+	rtw_udelay_os(us);
+}
+
+void ODM_sleep_ms(u32 ms)
+{
+	rtw_msleep_os(ms);
+}
+
+void ODM_sleep_us(u32 us)
+{
+	rtw_usleep_os(us);
+}
+
+void ODM_SetTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer, u32 msDelay)
+{
+	_set_timer(pTimer, msDelay); /* ms */
+}
+
+void ODM_InitializeTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer,
+			 void *CallBackFunc, void *pContext,
+			 const char *szID)
+{
+	struct adapter *Adapter = pDM_Odm->Adapter;
+	_init_timer(pTimer, Adapter->pnetdev, CallBackFunc, pDM_Odm);
+}
+
+void ODM_CancelTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer)
+{
+	_cancel_timer_ex(pTimer);
+}
+
+void ODM_ReleaseTimer(struct odm_dm_struct *pDM_Odm, struct timer_list *pTimer)
+{
+}
+
+/*  ODM FW relative API. */
+u32 ODM_FillH2CCmd(u8 *pH2CBuffer, u32 H2CBufferLen, u32 CmdNum,
+		      u32 *pElementID, u32 *pCmdLen,
+		      u8 **pCmbBuffer, u8 *CmdStartSeq)
+{
+	return	true;
+}
-- 
1.8.1.4



More information about the devel mailing list