[RFC/RFT 23/33] staging: r8188eu: Add files for new driver - part 23
Larry Finger
Larry.Finger at lwfinger.net
Thu Aug 22 03:34:05 UTC 2013
This commit adds files include/ieee80211.h, include/ieee80211_ext.h,
include/if_ether.h, include/ioctl_cfg80211.h, include/ip.h,
include/mlme_osdep.h, include/mp_custom_oid.h, and include/nic_spec.h.
Signed-off-by: Larry Finger <Larry.Finger at lwfinger.net>
---
drivers/staging/rtl8188eu/include/ieee80211.h | 1274 ++++++++++++++++++++
drivers/staging/rtl8188eu/include/ieee80211_ext.h | 290 +++++
drivers/staging/rtl8188eu/include/if_ether.h | 111 ++
drivers/staging/rtl8188eu/include/ioctl_cfg80211.h | 107 ++
drivers/staging/rtl8188eu/include/ip.h | 126 ++
drivers/staging/rtl8188eu/include/mlme_osdep.h | 35 +
drivers/staging/rtl8188eu/include/mp_custom_oid.h | 352 ++++++
drivers/staging/rtl8188eu/include/nic_spec.h | 44 +
8 files changed, 2339 insertions(+)
create mode 100644 drivers/staging/rtl8188eu/include/ieee80211.h
create mode 100644 drivers/staging/rtl8188eu/include/ieee80211_ext.h
create mode 100644 drivers/staging/rtl8188eu/include/if_ether.h
create mode 100644 drivers/staging/rtl8188eu/include/ioctl_cfg80211.h
create mode 100644 drivers/staging/rtl8188eu/include/ip.h
create mode 100644 drivers/staging/rtl8188eu/include/mlme_osdep.h
create mode 100644 drivers/staging/rtl8188eu/include/mp_custom_oid.h
create mode 100644 drivers/staging/rtl8188eu/include/nic_spec.h
diff --git a/drivers/staging/rtl8188eu/include/ieee80211.h b/drivers/staging/rtl8188eu/include/ieee80211.h
new file mode 100644
index 0000000..cd37ea4
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/ieee80211.h
@@ -0,0 +1,1274 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_H
+#define __IEEE80211_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include "wifi.h"
+#include <linux/wireless.h>
+
+#define MGMT_QUEUE_NUM 5
+
+#define ETH_ALEN 6
+#define ETH_TYPE_LEN 2
+#define PAYLOAD_TYPE_LEN 1
+
+#ifdef CONFIG_88EU_AP_MODE
+
+#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28)
+
+/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */
+enum {
+ RTL871X_HOSTAPD_FLUSH = 1,
+ RTL871X_HOSTAPD_ADD_STA = 2,
+ RTL871X_HOSTAPD_REMOVE_STA = 3,
+ RTL871X_HOSTAPD_GET_INFO_STA = 4,
+ /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
+ RTL871X_HOSTAPD_GET_WPAIE_STA = 5,
+ RTL871X_SET_ENCRYPTION = 6,
+ RTL871X_GET_ENCRYPTION = 7,
+ RTL871X_HOSTAPD_SET_FLAGS_STA = 8,
+ RTL871X_HOSTAPD_GET_RID = 9,
+ RTL871X_HOSTAPD_SET_RID = 10,
+ RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
+ RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12,
+ RTL871X_HOSTAPD_MLME = 13,
+ RTL871X_HOSTAPD_SCAN_REQ = 14,
+ RTL871X_HOSTAPD_STA_CLEAR_STATS = 15,
+ RTL871X_HOSTAPD_SET_BEACON = 16,
+ RTL871X_HOSTAPD_SET_WPS_BEACON = 17,
+ RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18,
+ RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19,
+ RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20,
+ RTL871X_HOSTAPD_SET_MACADDR_ACL = 21,
+ RTL871X_HOSTAPD_ACL_ADD_STA = 22,
+ RTL871X_HOSTAPD_ACL_REMOVE_STA = 23,
+};
+
+/* STA flags */
+#define WLAN_STA_AUTH BIT(0)
+#define WLAN_STA_ASSOC BIT(1)
+#define WLAN_STA_PS BIT(2)
+#define WLAN_STA_TIM BIT(3)
+#define WLAN_STA_PERM BIT(4)
+#define WLAN_STA_AUTHORIZED BIT(5)
+#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
+#define WLAN_STA_SHORT_PREAMBLE BIT(7)
+#define WLAN_STA_PREAUTH BIT(8)
+#define WLAN_STA_WME BIT(9)
+#define WLAN_STA_MFP BIT(10)
+#define WLAN_STA_HT BIT(11)
+#define WLAN_STA_WPS BIT(12)
+#define WLAN_STA_MAYBE_WPS BIT(13)
+#define WLAN_STA_NONERP BIT(31)
+
+#endif
+
+#define IEEE_CMD_SET_WPA_PARAM 1
+#define IEEE_CMD_SET_WPA_IE 2
+#define IEEE_CMD_SET_ENCRYPTION 3
+#define IEEE_CMD_MLME 4
+
+#define IEEE_PARAM_WPA_ENABLED 1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES 2
+#define IEEE_PARAM_DROP_UNENCRYPTED 3
+#define IEEE_PARAM_PRIVACY_INVOKED 4
+#define IEEE_PARAM_AUTH_ALGS 5
+#define IEEE_PARAM_IEEE_802_1X 6
+#define IEEE_PARAM_WPAX_SELECT 7
+
+#define AUTH_ALG_OPEN_SYSTEM 0x1
+#define AUTH_ALG_SHARED_KEY 0x2
+#define AUTH_ALG_LEAP 0x00000004
+
+#define IEEE_MLME_STA_DEAUTH 1
+#define IEEE_MLME_STA_DISASSOC 2
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
+
+
+#define IEEE_CRYPT_ALG_NAME_LEN 16
+
+#define WPA_CIPHER_NONE BIT(0)
+#define WPA_CIPHER_WEP40 BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP BIT(3)
+#define WPA_CIPHER_CCMP BIT(4)
+
+
+
+#define WPA_SELECTOR_LEN 4
+extern u8 RTW_WPA_OUI_TYPE[];
+extern u16 RTW_WPA_VERSION;
+extern u8 WPA_AUTH_KEY_MGMT_NONE[];
+extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 WPA_CIPHER_SUITE_NONE[];
+extern u8 WPA_CIPHER_SUITE_WEP40[];
+extern u8 WPA_CIPHER_SUITE_TKIP[];
+extern u8 WPA_CIPHER_SUITE_WRAP[];
+extern u8 WPA_CIPHER_SUITE_CCMP[];
+extern u8 WPA_CIPHER_SUITE_WEP104[];
+
+
+#define RSN_HEADER_LEN 4
+#define RSN_SELECTOR_LEN 4
+
+extern u16 RSN_VERSION_BSD;
+extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 RSN_CIPHER_SUITE_NONE[];
+extern u8 RSN_CIPHER_SUITE_WEP40[];
+extern u8 RSN_CIPHER_SUITE_TKIP[];
+extern u8 RSN_CIPHER_SUITE_WRAP[];
+extern u8 RSN_CIPHER_SUITE_CCMP[];
+extern u8 RSN_CIPHER_SUITE_WEP104[];
+
+enum ratr_table_mode {
+ RATR_INX_WIRELESS_NGB = 0, /* BGN 40 Mhz 2SS 1SS */
+ RATR_INX_WIRELESS_NG = 1, /* GN or N */
+ RATR_INX_WIRELESS_NB = 2, /* BGN 20 Mhz 2SS 1SS or BN */
+ RATR_INX_WIRELESS_N = 3,
+ RATR_INX_WIRELESS_GB = 4,
+ RATR_INX_WIRELESS_G = 5,
+ RATR_INX_WIRELESS_B = 6,
+ RATR_INX_WIRELESS_MC = 7,
+ RATR_INX_WIRELESS_AC_N = 8,
+};
+
+enum NETWORK_TYPE {
+ WIRELESS_INVALID = 0,
+ /* Sub-Element */
+ WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */
+ WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/
+ WIRELESS_11A = BIT(2), /* tx:ofdm only, rx: ofdm only, hw:ofdm only */
+ WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */
+ WIRELESS_11_5N = BIT(4), /* tx:MCS only, rx:MCS & ofdm, hw:ofdm only */
+ WIRELESS_AC = BIT(6),
+
+ /* Combination */
+ /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
+ WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G),
+ /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
+ WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11A_5N = (WIRELESS_11A | WIRELESS_11_5N),
+ /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+ WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N),
+ /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+ WIRELESS_11AGN = (WIRELESS_11A | WIRELESS_11G | WIRELESS_11_24N |
+ WIRELESS_11_5N),
+ WIRELESS_11ABGN = (WIRELESS_11A | WIRELESS_11B | WIRELESS_11G |
+ WIRELESS_11_24N | WIRELESS_11_5N),
+};
+
+#define SUPPORTED_24G_NETTYPE_MSK \
+ (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
+#define SUPPORTED_5G_NETTYPE_MSK \
+ (WIRELESS_11A | WIRELESS_11_5N)
+
+#define IsSupported24G(NetType) \
+ ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? true : false)
+#define IsSupported5G(NetType) \
+ ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? true : false)
+
+#define IsEnableHWCCK(NetType) \
+ IsSupported24G(NetType)
+#define IsEnableHWOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G | WIRELESS_11_24N | \
+ SUPPORTED_5G_NETTYPE_MSK) ? true : false)
+
+#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType)
+#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType)
+#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType)
+
+#define IsSupportedTxCCK(NetType) \
+ ((NetType) & (WIRELESS_11B) ? true : false)
+#define IsSupportedTxOFDM(NetType) \
+ ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? true : false)
+#define IsSupportedTxMCS(NetType) \
+ ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? true : false)
+
+
+struct ieee_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 name;
+ u32 value;
+ } wpa_param;
+ struct {
+ u32 len;
+ u8 reserved[32];
+ u8 data[0];
+ } wpa_ie;
+ struct {
+ int command;
+ int reason_code;
+ } mlme;
+ struct {
+ u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+ u8 set_tx;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+#ifdef CONFIG_88EU_AP_MODE
+ struct {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u8 tx_supp_rates[16];
+ struct rtw_ieee80211_ht_cap ht_cap;
+ } add_sta;
+ struct {
+ u8 reserved[2];/* for set max_num_sta */
+ u8 buf[0];
+ } bcn_ie;
+#endif
+
+ } u;
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+struct ieee_param_ex {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ u8 data[0];
+};
+
+struct sta_data {
+ u16 aid;
+ u16 capability;
+ int flags;
+ u32 sta_set;
+ u8 tx_supp_rates[16];
+ u32 tx_supp_rates_len;
+ struct rtw_ieee80211_ht_cap ht_cap;
+ u64 rx_pkts;
+ u64 rx_bytes;
+ u64 rx_drops;
+ u64 tx_pkts;
+ u64 tx_bytes;
+ u64 tx_drops;
+};
+#endif
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN 30
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+
+struct ieee_ibss_seq {
+ u8 mac[ETH_ALEN];
+ u16 seq_num;
+ u16 frag_num;
+ unsigned long packet_time;
+ struct list_head list;
+};
+
+struct rtw_ieee80211_hdr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+} __packed;
+
+struct rtw_ieee80211_hdr_qos {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u16 qc;
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr_qos {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u16 qc;
+} __packed;
+
+struct eapol {
+ u8 snap[6];
+ u16 ethertype;
+ u8 version;
+ u8 type;
+ u16 length;
+} __packed;
+
+enum eap_type {
+ EAP_PACKET = 0,
+ EAPOL_START,
+ EAPOL_LOGOFF,
+ EAPOL_KEY,
+ EAPOL_ENCAP_ASF_ALERT
+};
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* Frame control field constants */
+#define RTW_IEEE80211_FCTL_VERS 0x0003
+#define RTW_IEEE80211_FCTL_FTYPE 0x000c
+#define RTW_IEEE80211_FCTL_STYPE 0x00f0
+#define RTW_IEEE80211_FCTL_TODS 0x0100
+#define RTW_IEEE80211_FCTL_FROMDS 0x0200
+#define RTW_IEEE80211_FCTL_MOREFRAGS 0x0400
+#define RTW_IEEE80211_FCTL_RETRY 0x0800
+#define RTW_IEEE80211_FCTL_PM 0x1000
+#define RTW_IEEE80211_FCTL_MOREDATA 0x2000
+#define RTW_IEEE80211_FCTL_PROTECTED 0x4000
+#define RTW_IEEE80211_FCTL_ORDER 0x8000
+#define RTW_IEEE80211_FCTL_CTL_EXT 0x0f00
+
+#define RTW_IEEE80211_FTYPE_MGMT 0x0000
+#define RTW_IEEE80211_FTYPE_CTL 0x0004
+#define RTW_IEEE80211_FTYPE_DATA 0x0008
+#define RTW_IEEE80211_FTYPE_EXT 0x000c
+
+/* management */
+#define RTW_IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define RTW_IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define RTW_IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define RTW_IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define RTW_IEEE80211_STYPE_PROBE_REQ 0x0040
+#define RTW_IEEE80211_STYPE_PROBE_RESP 0x0050
+#define RTW_IEEE80211_STYPE_BEACON 0x0080
+#define RTW_IEEE80211_STYPE_ATIM 0x0090
+#define RTW_IEEE80211_STYPE_DISASSOC 0x00A0
+#define RTW_IEEE80211_STYPE_AUTH 0x00B0
+#define RTW_IEEE80211_STYPE_DEAUTH 0x00C0
+#define RTW_IEEE80211_STYPE_ACTION 0x00D0
+
+/* control */
+#define RTW_IEEE80211_STYPE_CTL_EXT 0x0060
+#define RTW_IEEE80211_STYPE_BACK_REQ 0x0080
+#define RTW_IEEE80211_STYPE_BACK 0x0090
+#define RTW_IEEE80211_STYPE_PSPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_RTS 0x00B0
+#define RTW_IEEE80211_STYPE_CTS 0x00C0
+#define RTW_IEEE80211_STYPE_ACK 0x00D0
+#define RTW_IEEE80211_STYPE_CFEND 0x00E0
+#define RTW_IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define RTW_IEEE80211_STYPE_DATA 0x0000
+#define RTW_IEEE80211_STYPE_DATA_CFACK 0x0010
+#define RTW_IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define RTW_IEEE80211_STYPE_NULLFUNC 0x0040
+#define RTW_IEEE80211_STYPE_CFACK 0x0050
+#define RTW_IEEE80211_STYPE_CFPOLL 0x0060
+#define RTW_IEEE80211_STYPE_CFACKPOLL 0x0070
+#define RTW_IEEE80211_STYPE_QOS_DATA 0x0080
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK 0x0090
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0
+#define RTW_IEEE80211_STYPE_QOS_NULLFUNC 0x00C0
+#define RTW_IEEE80211_STYPE_QOS_CFACK 0x00D0
+#define RTW_IEEE80211_STYPE_QOS_CFPOLL 0x00E0
+#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+
+/* sequence control field */
+#define RTW_IEEE80211_SCTL_FRAG 0x000F
+#define RTW_IEEE80211_SCTL_SEQ 0xFFF0
+
+
+#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
+#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+/* QoS, QOS */
+#define NORMAL_ACK 0
+#define NO_ACK 1
+#define NON_EXPLICIT_ACK 2
+#define BLOCK_ACK 3
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#define ETH_P_ECONET 0x0018
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+} __packed;
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE)
+
+#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) ((seq) & RTW_IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+#define WLAN_REASON_JOIN_WRONG_CHANNEL 65534
+#define WLAN_REASON_EXPIRATION_CHK 65535
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+/* EIDs defined by IEEE 802.11h - START */
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUITE 40
+#define WLAN_EID_IBSS_DFS 41
+/* EIDs defined by IEEE 802.11h - END */
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC)
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION (1<<0)
+#define IEEE80211_OFDM_MODULATION (1<<1)
+
+#define IEEE80211_24GHZ_BAND (1<<0)
+#define IEEE80211_52GHZ_BAND (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN 4
+#define IEEE80211_NUM_OFDM_RATESLEN 8
+
+
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_LEN 8
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK \
+ (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK \
+ (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES 8
+#define IEEE80211_NUM_CCK_RATES 4
+#define IEEE80211_OFDM_SHIFT_MASK_A 4
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received. Not setting these will not cause
+ * any adverse affects. */
+struct ieee80211_rx_stats {
+ /* u32 mac_time[2]; */
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u8 received_channel;
+ u16 rate; /* in 100 kbps */
+ /* u8 control; */
+ u8 mask;
+ u8 freq;
+ u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+ u32 first_frag_time;
+ uint seq;
+ uint last_frag;
+ uint qos; /* jackson */
+ uint tid; /* jackson */
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+ uint tx_unicast_frames;
+ uint tx_multicast_frames;
+ uint tx_fragments;
+ uint tx_unicast_octets;
+ uint tx_multicast_octets;
+ uint tx_deferred_transmissions;
+ uint tx_single_retry_frames;
+ uint tx_multiple_retry_frames;
+ uint tx_retry_limit_exceeded;
+ uint tx_discards;
+ uint rx_unicast_frames;
+ uint rx_multicast_frames;
+ uint rx_fragments;
+ uint rx_unicast_octets;
+ uint rx_multicast_octets;
+ uint rx_fcs_errors;
+ uint rx_discards_no_buffer;
+ uint tx_discards_wrong_sa;
+ uint rx_discards_undecryptable;
+ uint rx_message_in_msg_fragments;
+ uint rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_softmac_stats {
+ uint rx_ass_ok;
+ uint rx_ass_err;
+ uint rx_probe_rq;
+ uint tx_probe_rs;
+ uint tx_beacons;
+ uint rx_auth_rq;
+ uint rx_auth_rs_ok;
+ uint rx_auth_rs_err;
+ uint tx_auth_rq;
+ uint no_auth_rs;
+ uint no_ass_rs;
+ uint tx_ass_rq;
+ uint rx_ass_rq;
+ uint tx_probe_rq;
+ uint reassoc;
+ uint swtxstop;
+ uint swtxawake;
+};
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+ u16 active_key:2,
+ enabled:1,
+ auth_mode:2,
+ auth_algo:4,
+ unicast_uses_group:1;
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __packed;
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID 0
+#define MFIE_TYPE_RATES 1
+#define MFIE_TYPE_FH_SET 2
+#define MFIE_TYPE_DS_SET 3
+#define MFIE_TYPE_CF_SET 4
+#define MFIE_TYPE_TIM 5
+#define MFIE_TYPE_IBSS_SET 6
+#define MFIE_TYPE_CHALLENGE 16
+#define MFIE_TYPE_ERP 42
+#define MFIE_TYPE_RSN 48
+#define MFIE_TYPE_RATES_EX 50
+#define MFIE_TYPE_GENERIC 221
+
+struct ieee80211_info_element_hdr {
+ u8 id;
+ u8 len;
+} __packed;
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __packed;
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __packed;
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 10
+
+struct ieee80211_authentication {
+ struct ieee80211_header_data header;
+ u16 algorithm;
+ u16 transaction;
+ u16 status;
+ /* struct ieee80211_info_element_hdr info_element; */
+} __packed;
+
+struct ieee80211_probe_response {
+ struct ieee80211_header_data header;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 capability;
+ struct ieee80211_info_element info_element;
+} __packed;
+
+struct ieee80211_probe_request {
+ struct ieee80211_header_data header;
+} __packed;
+
+struct ieee80211_assoc_request_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 listen_interval;
+ struct ieee80211_info_element_hdr info_element;
+} __packed;
+
+struct ieee80211_assoc_response_frame {
+ struct rtw_ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 status;
+ u16 aid;
+} __packed;
+
+struct ieee80211_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u16 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+#define MAX_CHANNEL_NUMBER 161
+#define IEEE80211_SOFTMAC_SCAN_TIME 400
+/* HZ / 2) */
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN (256)
+#define MAX_WPS_IE_LEN (512)
+#define MAX_P2P_IE_LEN (256)
+#define MAX_WFD_IE_LEN (128)
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+#define IW_ESSID_MAX_SIZE 32
+/*
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+*/
+
+enum ieee80211_state {
+ /* the card is not linked at all */
+ IEEE80211_NOLINK = 0,
+
+ /* IEEE80211_ASSOCIATING* are for BSS client mode
+ * the driver shall not perform RX filtering unless
+ * the state is LINKED.
+ * The driver shall just check for the state LINKED and
+ * defaults to NOLINK for ALL the other states (including
+ * LINKED_SCANNING)
+ */
+
+ /* the association procedure will start (wq scheduling)*/
+ IEEE80211_ASSOCIATING,
+ IEEE80211_ASSOCIATING_RETRY,
+
+ /* the association procedure is sending AUTH request*/
+ IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+ /* the association procedure has successfully authentcated
+ * and is sending association request
+ */
+ IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+ /* the link is ok. the card associated to a BSS or linked
+ * to a ibss cell or acting as an AP and creating the bss
+ */
+ IEEE80211_LINKED,
+
+ /* same as LINKED, but the driver shall apply RX filter
+ * rules as we are in NO_LINK mode. As the card is still
+ * logically linked, but it is doing a syncro site survey
+ * then it will be back to LINKED state.
+ */
+ IEEE80211_LINKED_SCANNING,
+
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+static inline int is_multicast_mac_addr(const u8 *addr)
+{
+ return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
+static inline int is_broadcast_mac_addr(const u8 *addr)
+{
+ return (addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&
+ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff);
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct tx_pending {
+ int frag;
+ struct ieee80211_txb *txb;
+};
+
+#define MAXTID 16
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+/* Baron move to ieee80211.c */
+int ieee80211_is_empty_essid(const char *essid, int essid_len);
+int ieee80211_get_hdrlen(u16 fc);
+
+/* Action category code */
+enum rtw_ieee80211_category {
+ RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ RTW_WLAN_CATEGORY_QOS = 1,
+ RTW_WLAN_CATEGORY_DLS = 2,
+ RTW_WLAN_CATEGORY_BACK = 3,
+ RTW_WLAN_CATEGORY_PUBLIC = 4, /* IEEE 802.11 public action frames */
+ RTW_WLAN_CATEGORY_RADIO_MEASUREMENT = 5,
+ RTW_WLAN_CATEGORY_FT = 6,
+ RTW_WLAN_CATEGORY_HT = 7,
+ RTW_WLAN_CATEGORY_SA_QUERY = 8,
+ RTW_WLAN_CATEGORY_TDLS = 12,
+ RTW_WLAN_CATEGORY_WMM = 17,
+ RTW_WLAN_CATEGORY_P2P = 0x7f,/* P2P action frames */
+};
+
+/* SPECTRUM_MGMT action code */
+enum rtw_ieee80211_spectrum_mgmt_actioncode {
+ RTW_WLAN_ACTION_SPCT_MSR_REQ = 0,
+ RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ RTW_WLAN_ACTION_SPCT_TPC_REQ = 2,
+ RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+enum _PUBLIC_ACTION {
+ ACT_PUBLIC_BSSCOEXIST = 0, /* 20/40 BSS Coexistence */
+ ACT_PUBLIC_DSE_ENABLE = 1,
+ ACT_PUBLIC_DSE_DEENABLE = 2,
+ ACT_PUBLIC_DSE_REG_LOCATION = 3,
+ ACT_PUBLIC_EXT_CHL_SWITCH = 4,
+ ACT_PUBLIC_DSE_MSR_REQ = 5,
+ ACT_PUBLIC_DSE_MSR_RPRT = 6,
+ ACT_PUBLIC_MP = 7, /* Measurement Pilot */
+ ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8,
+ ACT_PUBLIC_VENDOR = 9, /* for WIFI_DIRECT */
+ ACT_PUBLIC_GAS_INITIAL_REQ = 10,
+ ACT_PUBLIC_GAS_INITIAL_RSP = 11,
+ ACT_PUBLIC_GAS_COMEBACK_REQ = 12,
+ ACT_PUBLIC_GAS_COMEBACK_RSP = 13,
+ ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14,
+ ACT_PUBLIC_LOCATION_TRACK = 15,
+ ACT_PUBLIC_MAX
+};
+
+/* BACK action code */
+enum rtw_ieee80211_back_actioncode {
+ RTW_WLAN_ACTION_ADDBA_REQ = 0,
+ RTW_WLAN_ACTION_ADDBA_RESP = 1,
+ RTW_WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum rtw_ieee80211_ht_actioncode {
+ RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ RTW_WLAN_ACTION_SM_PS = 1,
+ RTW_WLAN_ACTION_PSPM = 2,
+ RTW_WLAN_ACTION_PCO_PHASE = 3,
+ RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
+ RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
+ RTW_WLAN_ACTION_MIMP_CP_BF = 6,
+ RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum rtw_ieee80211_back_parties {
+ RTW_WLAN_BACK_RECIPIENT = 0,
+ RTW_WLAN_BACK_INITIATOR = 1,
+ RTW_WLAN_BACK_TIMER = 2,
+};
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+ * 00:50:F2 */
+#define WME_OUI_TYPE 2
+#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WME_VERSION 1
+
+#define WME_ACTION_CODE_SETUP_REQUEST 0
+#define WME_ACTION_CODE_SETUP_RESPONSE 1
+#define WME_ACTION_CODE_TEARDOWN 2
+
+#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0
+#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1
+#define WME_SETUP_RESPONSE_STATUS_REFUSED 3
+
+#define WME_TSPEC_DIRECTION_UPLINK 0
+#define WME_TSPEC_DIRECTION_DOWNLINK 1
+#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+/**
+ * enum rtw_ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ * on this channel.
+ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * is not permitted.
+ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * is not permitted.
+ */
+enum rtw_ieee80211_channel_flags {
+ RTW_IEEE80211_CHAN_DISABLED = 1<<0,
+ RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
+ RTW_IEEE80211_CHAN_NO_IBSS = 1<<2,
+ RTW_IEEE80211_CHAN_RADAR = 1<<3,
+ RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
+ RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
+};
+
+#define RTW_IEEE80211_CHAN_NO_HT40 \
+ (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS)
+
+/* Represent channel details, subset of ieee80211_channel */
+struct rtw_ieee80211_channel {
+ u16 hw_value;
+ u32 flags;
+};
+
+#define CHAN_FMT \
+ "hw_value:%u, " \
+ "flags:0x%08x" \
+
+#define CHAN_ARG(channel) \
+ (channel)->hw_value \
+ , (channel)->flags \
+
+/* Parsed Information Elements */
+struct rtw_ieee802_11_elems {
+ u8 *ssid;
+ u8 ssid_len;
+ u8 *supp_rates;
+ u8 supp_rates_len;
+ u8 *fh_params;
+ u8 fh_params_len;
+ u8 *ds_params;
+ u8 ds_params_len;
+ u8 *cf_params;
+ u8 cf_params_len;
+ u8 *tim;
+ u8 tim_len;
+ u8 *ibss_params;
+ u8 ibss_params_len;
+ u8 *challenge;
+ u8 challenge_len;
+ u8 *erp_info;
+ u8 erp_info_len;
+ u8 *ext_supp_rates;
+ u8 ext_supp_rates_len;
+ u8 *wpa_ie;
+ u8 wpa_ie_len;
+ u8 *rsn_ie;
+ u8 rsn_ie_len;
+ u8 *wme;
+ u8 wme_len;
+ u8 *wme_tspec;
+ u8 wme_tspec_len;
+ u8 *wps_ie;
+ u8 wps_ie_len;
+ u8 *power_cap;
+ u8 power_cap_len;
+ u8 *supp_channels;
+ u8 supp_channels_len;
+ u8 *mdie;
+ u8 mdie_len;
+ u8 *ftie;
+ u8 ftie_len;
+ u8 *timeout_int;
+ u8 timeout_int_len;
+ u8 *ht_capabilities;
+ u8 ht_capabilities_len;
+ u8 *ht_operation;
+ u8 ht_operation_len;
+ u8 *vendor_ht_cap;
+ u8 vendor_ht_cap_len;
+};
+
+enum parse_res {
+ ParseOK = 0,
+ ParseUnknown = 1,
+ ParseFailed = -1
+};
+
+enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len,
+ struct rtw_ieee802_11_elems *elems,
+ int show_errors);
+
+u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len,
+ unsigned char *source, unsigned int *frlen);
+u8 *rtw_set_ie(u8 *pbuf, int index, uint len, u8 *source, uint *frlen);
+
+enum secondary_ch_offset {
+ SCN = 0, /* no secondary channel */
+ SCA = 1, /* secondary channel above */
+ SCB = 3, /* secondary channel below */
+};
+u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset);
+u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset);
+u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
+ u8 new_ch, u8 ch_switch_cnt);
+u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len,
+ u8 secondary_ch_offset);
+u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl,
+ u8 flags, u16 reason, u16 precedence);
+
+u8 *rtw_get_ie(u8 *pbuf, int index, int *len, int limit);
+u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui,
+ u8 oui_len, u8 *ie, uint *ielen);
+int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset,
+ u8 eid, u8 *oui, u8 oui_len);
+
+void rtw_set_supported_rate(u8 *SupportedRates, uint mode);
+
+unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit);
+unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
+int rtw_get_wpa_cipher_suite(u8 *s);
+int rtw_get_wpa2_cipher_suite(u8 *s);
+int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len);
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+ int *pairwise_cipher, int *is_8021x);
+
+int rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
+ u8 *wpa_ie, u16 *wpa_len);
+
+u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen);
+u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
+u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+ u8 *buf_content, uint *len_content);
+
+/**
+ * for_each_ie - iterate over continuous IEs
+ * @ie:
+ * @buf:
+ * @buf_len:
+ */
+#define for_each_ie(ie, buf, buf_len) \
+ for (ie = (void *)buf; (((u8 *)ie) - ((u8 *)buf) + 1) < buf_len; \
+ ie = (void *)(((u8 *)ie) + *(((u8 *)ie)+1) + 2))
+
+void dump_ies(u8 *buf, u32 buf_len);
+void dump_wps_ie(u8 *ie, u32 ie_len);
+
+#ifdef CONFIG_88EU_P2P
+void dump_p2p_ie(u8 *ie, u32 ie_len);
+u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen);
+u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+ u8 *buf_content, uint *len_content);
+u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len,
+ u8 *pdata_attr);
+void rtw_wlan_bssid_ex_remove_p2p_attr(struct wlan_bssid_ex *bss_ex,
+ u8 attr_id);
+#endif
+
+uint rtw_get_rateset_len(u8 *rateset);
+
+struct registry_priv;
+int rtw_generate_ie(struct registry_priv *pregistrypriv);
+
+
+int rtw_get_bit_value_from_ieee_value(u8 val);
+
+uint rtw_is_cckrates_included(u8 *rate);
+
+uint rtw_is_cckratesonly_included(u8 *rate);
+
+int rtw_check_network_type(unsigned char *rate, int ratelen, int channel);
+
+void rtw_get_bcn_info(struct wlan_network *pnetwork);
+
+void rtw_macaddr_cfg(u8 *mac_addr);
+
+u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
+ unsigned char *MCS_rate);
+
+int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8 *category,
+ u8 *action);
+const char *action_public_str(u8 action);
+
+#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8188eu/include/ieee80211_ext.h b/drivers/staging/rtl8188eu/include/ieee80211_ext.h
new file mode 100644
index 0000000..1052d18
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/ieee80211_ext.h
@@ -0,0 +1,290 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_EXT_H
+#define __IEEE80211_EXT_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+
+
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+
+
+#define PMKID_LEN 16
+
+
+struct wpa_ie_hdr {
+ u8 elem_id;
+ u8 len;
+ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct rsn_ie_hdr {
+ u8 elem_id; /* WLAN_EID_RSN */
+ u8 len;
+ u8 version[2]; /* little endian */
+} __packed;
+
+struct wme_ac_parameter {
+#if defined(__LITTLE_ENDIAN)
+ /* byte 1 */
+ u8 aifsn:4,
+ acm:1,
+ aci:2,
+ reserved:1;
+
+ /* byte 2 */
+ u8 eCWmin:4,
+ eCWmax:4;
+#elif defined(__BIG_ENDIAN)
+ /* byte 1 */
+ u8 reserved:1,
+ aci:2,
+ acm:1,
+ aifsn:4;
+
+ /* byte 2 */
+ u8 eCWmax:4,
+ eCWmin:4;
+#else
+#error "Please fix <endian.h>"
+#endif
+
+ /* bytes 3 & 4 */
+ u16 txopLimit;
+} __packed;
+
+struct wme_parameter_element {
+ /* required fields for WME version 1 */
+ u8 oui[3];
+ u8 oui_type;
+ u8 oui_subtype;
+ u8 version;
+ u8 acInfo;
+ u8 reserved;
+ struct wme_ac_parameter ac[4];
+
+} __packed;
+
+#define WPA_PUT_LE16(a, val) \
+ do { \
+ (a)[1] = ((u16) (val)) >> 8; \
+ (a)[0] = ((u16) (val)) & 0xff; \
+ } while (0)
+
+#define WPA_PUT_BE32(a, val) \
+ do { \
+ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[3] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define WPA_PUT_LE32(a, val) \
+ do { \
+ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \
+ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \
+ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \
+ (a)[0] = (u8) (((u32) (val)) & 0xff); \
+ } while (0)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
+
+/* Action category code */
+enum ieee80211_category {
+ WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+ WLAN_CATEGORY_QOS = 1,
+ WLAN_CATEGORY_DLS = 2,
+ WLAN_CATEGORY_BACK = 3,
+ WLAN_CATEGORY_HT = 7,
+ WLAN_CATEGORY_WMM = 17,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+ WLAN_ACTION_SPCT_MSR_REQ = 0,
+ WLAN_ACTION_SPCT_MSR_RPRT = 1,
+ WLAN_ACTION_SPCT_TPC_REQ = 2,
+ WLAN_ACTION_SPCT_TPC_RPRT = 3,
+ WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+ WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+ WLAN_ACTION_ADDBA_REQ = 0,
+ WLAN_ACTION_ADDBA_RESP = 1,
+ WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum ieee80211_ht_actioncode {
+ WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+ WLAN_ACTION_SM_PS = 1,
+ WLAN_ACTION_PSPM = 2,
+ WLAN_ACTION_PCO_PHASE = 3,
+ WLAN_ACTION_MIMO_CSI_MX = 4,
+ WLAN_ACTION_MIMO_NONCP_BF = 5,
+ WLAN_ACTION_MIMP_CP_BF = 6,
+ WLAN_ACTION_ASEL_INDICATES_FB = 7,
+ WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+ WLAN_BACK_RECIPIENT = 0,
+ WLAN_BACK_INITIATOR = 1,
+ WLAN_BACK_TIMER = 2,
+};
+
+struct ieee80211_mgmt {
+ u16 frame_control;
+ u16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ u16 seq_ctrl;
+ union {
+ struct {
+ u16 auth_alg;
+ u16 auth_transaction;
+ u16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[0];
+ } __packed auth;
+ struct {
+ u16 reason_code;
+ } __packed deauth;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed assoc_req;
+ struct {
+ u16 capab_info;
+ u16 status_code;
+ u16 aid;
+ /* followed by Supported rates */
+ u8 variable[0];
+ } __packed assoc_resp, reassoc_resp;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __packed reassoc_req;
+ struct {
+ u16 reason_code;
+ } __packed disassoc;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[0];
+ } __packed beacon;
+ struct {
+ /* only variable items: SSID, Supported rates */
+ u8 variable[0];
+ } __packed probe_req;
+ struct {
+ __le64 timestamp;
+ u16 beacon_int;
+ u16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[0];
+ } __packed probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[0];
+ } __packed wme_action;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 capab;
+ u16 timeout;
+ u16 start_seq_num;
+ } __packed addba_req;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u16 status;
+ u16 capab;
+ u16 timeout;
+ } __packed addba_resp;
+ struct {
+ u8 action_code;
+ u16 params;
+ u16 reason_code;
+ } __packed delba;
+ structi {
+ u8 action_code;
+ /* capab_info for open and confirm,
+ * reason for close
+ */
+ u16 aux;
+ /* Followed in plink_confirm by status
+ * code, AID and supported rates,
+ * and directly by supported rates in
+ * plink_open and plink_close
+ */
+ u8 variable[0];
+ } __packed plink_action;
+ struct{
+ u8 action_code;
+ u8 variable[0];
+ } __packed mesh_action;
+ } __packed u;
+ } __packed action;
+ } __packed u;
+} __packed;
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE \
+ FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/if_ether.h b/drivers/staging/rtl8188eu/include/if_ether.h
new file mode 100644
index 0000000..db15771
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/if_ether.h
@@ -0,0 +1,111 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
+
+/*
+ * These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
+#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
+#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
+#define ETH_P_IP 0x0800 /* Internet Protocol packet */
+#define ETH_P_X25 0x0805 /* CCITT X.25 */
+#define ETH_P_ARP 0x0806 /* Address Resolution packet */
+#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
+#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
+#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
+#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
+#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
+#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
+#define ETH_P_LAT 0x6004 /* DEC LAT */
+#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
+#define ETH_P_CUST 0x6006 /* DEC Customer use */
+#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
+#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
+#define ETH_P_ATALK 0x809B /* Appletalk DDP */
+#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+#define ETH_P_IPX 0x8137 /* IPX over DIX */
+#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
+#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
+ * over Ethernet
+ */
+
+/*
+ * Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
+#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
+#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
+#define ETH_P_802_2 0x0004 /* 802.2 frames */
+#define ETH_P_SNAP 0x0005 /* Internal only */
+#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
+#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
+#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
+#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz at cafe.net) */
+#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
+#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
+#define ETH_P_ECONET 0x0018 /* Acorn Econet */
+
+/*
+ * This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ unsigned short h_proto; /* packet type ID field */
+};
+
+struct _vlan {
+ unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
+ unsigned short h_vlan_encapsulated_proto;
+};
+
+#define get_vlan_id(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
+#define get_vlan_priority(pvlan) \
+ ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
+#define get_vlan_encap_proto(pvlan) \
+ (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
+
+#endif /* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/rtl8188eu/include/ioctl_cfg80211.h b/drivers/staging/rtl8188eu/include/ioctl_cfg80211.h
new file mode 100644
index 0000000..037e9a5
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/ioctl_cfg80211.h
@@ -0,0 +1,107 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IOCTL_CFG80211_H__
+#define __IOCTL_CFG80211_H__
+
+struct rtw_wdev_invit_info {
+ u8 token;
+ u8 flags;
+ u8 status;
+ u8 req_op_ch;
+ u8 rsp_op_ch;
+};
+
+#define rtw_wdev_invit_info_init(invit_info) \
+ do { \
+ (invit_info)->token = 0; \
+ (invit_info)->flags = 0x00; \
+ (invit_info)->status = 0xff; \
+ (invit_info)->req_op_ch = 0; \
+ (invit_info)->rsp_op_ch = 0; \
+ } while (0)
+
+struct rtw_wdev_priv {
+ struct wireless_dev *rtw_wdev;
+
+ struct adapter *padapter;
+
+ struct cfg80211_scan_request *scan_request;
+ spinlock_t scan_req_lock;
+
+ struct net_device *pmon_ndev;/* for monitor interface */
+ char ifname_mon[IFNAMSIZ + 1]; /* name of monitor interface */
+
+ u8 p2p_enabled;
+
+ u8 provdisc_req_issued;
+
+ struct rtw_wdev_invit_info invit_info;
+
+ u8 bandroid_scan;
+ bool block;
+ bool power_mgmt;
+};
+
+#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w)))
+
+#define wiphy_to_wdev(x) \
+((struct wireless_dev *)(((struct rtw_wdev_priv *)wiphy_priv(x))->rtw_wdev))
+
+int rtw_wdev_alloc(struct adapter *padapter, struct device *dev);
+void rtw_wdev_free(struct wireless_dev *wdev);
+void rtw_wdev_unregister(struct wireless_dev *wdev);
+
+void rtw_cfg80211_init_wiphy(struct adapter *padapter);
+
+void rtw_cfg80211_surveydone_event_callback(struct adapter *padapter);
+
+void rtw_cfg80211_indicate_connect(struct adapter *padapter);
+void rtw_cfg80211_indicate_disconnect(struct adapter *padapter);
+void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv,
+ bool aborted);
+
+#ifdef CONFIG_88EU_AP_MODE
+void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_indicate_sta_disassoc(struct adapter *padapter,
+ unsigned char *da,
+ unsigned short reason);
+#endif /* CONFIG_88EU_AP_MODE */
+
+void rtw_cfg80211_issue_p2p_provision_request(struct adapter *padapter,
+ const u8 *buf, size_t len);
+void rtw_cfg80211_rx_p2p_action_public(struct adapter *padapter,
+ u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_rx_action_p2p(struct adapter *padapter, u8 *pmgmt_frame,
+ uint frame_len);
+void rtw_cfg80211_rx_action(struct adapter *adapter, u8 *frame,
+ uint frame_len, const char *msg);
+
+int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net,
+ char *buf, int len, int type);
+
+bool rtw_cfg80211_pwr_mgmt(struct adapter *adapter);
+
+#define rtw_cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp) \
+ cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp)
+#define rtw_cfg80211_send_rx_assoc(dev, bss, buf, len) \
+ cfg80211_send_rx_assoc(dev, bss, buf, len)
+
+#endif /* __IOCTL_CFG80211_H__ */
diff --git a/drivers/staging/rtl8188eu/include/ip.h b/drivers/staging/rtl8188eu/include/ip.h
new file mode 100644
index 0000000..9fdac6d
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/ip.h
@@ -0,0 +1,126 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+
+/* SOL_IP socket options */
+
+#define IPTOS_TOS_MASK 0x1E
+#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
+#define IPTOS_LOWDELAY 0x10
+#define IPTOS_THROUGHPUT 0x08
+#define IPTOS_RELIABILITY 0x04
+#define IPTOS_MINCOST 0x02
+
+#define IPTOS_PREC_MASK 0xE0
+#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL 0xe0
+#define IPTOS_PREC_INTERNETCONTROL 0xc0
+#define IPTOS_PREC_CRITIC_ECP 0xa0
+#define IPTOS_PREC_FLASHOVERRIDE 0x80
+#define IPTOS_PREC_FLASH 0x60
+#define IPTOS_PREC_IMMEDIATE 0x40
+#define IPTOS_PREC_PRIORITY 0x20
+#define IPTOS_PREC_ROUTINE 0x00
+
+
+/* IP options */
+#define IPOPT_COPY 0x80
+#define IPOPT_CLASS_MASK 0x60
+#define IPOPT_NUMBER_MASK 0x1f
+
+#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
+#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
+#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
+
+#define IPOPT_CONTROL 0x00
+#define IPOPT_RESERVED1 0x20
+#define IPOPT_MEASUREMENT 0x40
+#define IPOPT_RESERVED2 0x60
+
+#define IPOPT_END (0 | IPOPT_CONTROL)
+#define IPOPT_NOOP (1 | IPOPT_CONTROL)
+#define IPOPT_SEC (2 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_LSRR (3 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_TIMESTAMP (4 | IPOPT_MEASUREMENT)
+#define IPOPT_RR (7 | IPOPT_CONTROL)
+#define IPOPT_SID (8 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_SSRR (9 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_RA (20 | IPOPT_CONTROL | IPOPT_COPY)
+
+#define IPVERSION 4
+#define MAXTTL 255
+#define IPDEFTTL 64
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN 1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS IPOPT_TIMESTAMP
+
+#define IPOPT_TS_TSONLY 0 /* timestamps only */
+#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
+#define IPOPT_TS_PRESPEC 3 /* specified modules only */
+
+struct ip_options {
+ __u32 faddr; /* Saved first hop address */
+ unsigned char optlen;
+ unsigned char srr;
+ unsigned char rr;
+ unsigned char ts;
+ unsigned char is_setbyuser:1, /* Set by setsockopt? */
+ is_data:1, /* Options in __data, rather than skb*/
+ is_strictroute:1,/* Strict source route */
+ srr_is_hit:1, /* Packet destn addr was ours */
+ is_changed:1, /* IP checksum more not valid */
+ rr_needaddr:1, /* Need to record addr of out dev*/
+ ts_needtime:1, /* Need to record timestamp */
+ ts_needaddr:1; /* Need to record addr of out dev */
+ unsigned char router_alert;
+ unsigned char __pad1;
+ unsigned char __pad2;
+ unsigned char __data[0];
+};
+
+#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 ihl:4,
+ version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 version:4,
+ ihl:4;
+#endif
+ __u8 tos;
+ __u16 tot_len;
+ __u16 id;
+ __u16 frag_off;
+ __u8 ttl;
+ __u8 protocol;
+ __u16 check;
+ __u32 saddr;
+ __u32 daddr;
+ /*The options start here. */
+};
+
+#endif /* _LINUX_IP_H */
diff --git a/drivers/staging/rtl8188eu/include/mlme_osdep.h b/drivers/staging/rtl8188eu/include/mlme_osdep.h
new file mode 100644
index 0000000..ae1722c
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/mlme_osdep.h
@@ -0,0 +1,35 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __MLME_OSDEP_H_
+#define __MLME_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+void rtw_init_mlme_timer(struct adapter *padapter);
+void rtw_os_indicate_disconnect(struct adapter *adapter);
+void rtw_os_indicate_connect(struct adapter *adapter);
+void rtw_os_indicate_scan_done(struct adapter *padapter, bool aborted);
+void rtw_report_sec_ie(struct adapter *adapter, u8 authmode, u8 *sec_ie);
+
+void rtw_reset_securitypriv(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+
+#endif /* _MLME_OSDEP_H_ */
diff --git a/drivers/staging/rtl8188eu/include/mp_custom_oid.h b/drivers/staging/rtl8188eu/include/mp_custom_oid.h
new file mode 100644
index 0000000..6fa52cf
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/mp_custom_oid.h
@@ -0,0 +1,352 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __CUSTOM_OID_H
+#define __CUSTOM_OID_H
+
+/* by Owen */
+/* 0xFF818000 - 0xFF81802F RTL8180 Mass Production Kit */
+/* 0xFF818500 - 0xFF81850F RTL8185 Setup Utility */
+/* 0xFF818580 - 0xFF81858F RTL8185 Phy Status Utility */
+
+/* */
+
+/* by Owen for Production Kit */
+/* For Production Kit with Agilent Equipments */
+/* in order to make our custom oids hopefully somewhat unique */
+/* we will use 0xFF (indicating implementation specific OID) */
+/* 81(first byte of non zero Realtek unique identifier) */
+/* 80 (second byte of non zero Realtek unique identifier) */
+/* XX (the custom OID number - providing 255 possible custom oids) */
+
+#define OID_RT_PRO_RESET_DUT 0xFF818000
+#define OID_RT_PRO_SET_DATA_RATE 0xFF818001
+#define OID_RT_PRO_START_TEST 0xFF818002
+#define OID_RT_PRO_STOP_TEST 0xFF818003
+#define OID_RT_PRO_SET_PREAMBLE 0xFF818004
+#define OID_RT_PRO_SET_SCRAMBLER 0xFF818005
+#define OID_RT_PRO_SET_FILTER_BB 0xFF818006
+#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB 0xFF818007
+#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL 0xFF818008
+#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL 0xFF818009
+#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL 0xFF81800A
+
+#define OID_RT_PRO_SET_TX_ANTENNA_BB 0xFF81800D
+#define OID_RT_PRO_SET_ANTENNA_BB 0xFF81800E
+#define OID_RT_PRO_SET_CR_SCRAMBLER 0xFF81800F
+#define OID_RT_PRO_SET_CR_NEW_FILTER 0xFF818010
+#define OID_RT_PRO_SET_TX_POWER_CONTROL 0xFF818011
+#define OID_RT_PRO_SET_CR_TX_CONFIG 0xFF818012
+#define OID_RT_PRO_GET_TX_POWER_CONTROL 0xFF818013
+#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY 0xFF818014
+#define OID_RT_PRO_SET_CR_SETPOINT 0xFF818015
+#define OID_RT_PRO_SET_INTEGRATOR 0xFF818016
+#define OID_RT_PRO_SET_SIGNAL_QUALITY 0xFF818017
+#define OID_RT_PRO_GET_INTEGRATOR 0xFF818018
+#define OID_RT_PRO_GET_SIGNAL_QUALITY 0xFF818019
+#define OID_RT_PRO_QUERY_EEPROM_TYPE 0xFF81801A
+#define OID_RT_PRO_WRITE_MAC_ADDRESS 0xFF81801B
+#define OID_RT_PRO_READ_MAC_ADDRESS 0xFF81801C
+#define OID_RT_PRO_WRITE_CIS_DATA 0xFF81801D
+#define OID_RT_PRO_READ_CIS_DATA 0xFF81801E
+#define OID_RT_PRO_WRITE_POWER_CONTROL 0xFF81801F
+#define OID_RT_PRO_READ_POWER_CONTROL 0xFF818020
+#define OID_RT_PRO_WRITE_EEPROM 0xFF818021
+#define OID_RT_PRO_READ_EEPROM 0xFF818022
+#define OID_RT_PRO_RESET_TX_PACKET_SENT 0xFF818023
+#define OID_RT_PRO_QUERY_TX_PACKET_SENT 0xFF818024
+#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED 0xFF818025
+#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED 0xFF818026
+#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR 0xFF818027
+#define OID_RT_PRO_QUERY_CURRENT_ADDRESS 0xFF818028
+#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS 0xFF818029
+#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS 0xFF81802A
+#define OID_RT_PRO_RECEIVE_PACKET 0xFF81802C
+/* added by Owen on 04/08/03 for Cameo's request */
+#define OID_RT_PRO_WRITE_EEPROM_BYTE 0xFF81802D
+#define OID_RT_PRO_READ_EEPROM_BYTE 0xFF81802E
+#define OID_RT_PRO_SET_MODULATION 0xFF81802F
+/* */
+
+/* Sean */
+#define OID_RT_DRIVER_OPTION 0xFF818080
+#define OID_RT_RF_OFF 0xFF818081
+#define OID_RT_AUTH_STATUS 0xFF818082
+
+/* */
+#define OID_RT_PRO_SET_CONTINUOUS_TX 0xFF81800B
+#define OID_RT_PRO_SET_SINGLE_CARRIER_TX 0xFF81800C
+#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX 0xFF81802B
+#define OID_RT_PRO_SET_SINGLE_TONE_TX 0xFF818043
+/* */
+
+
+/* by Owen for RTL8185 Phy Status Report Utility */
+#define OID_RT_UTILITY_false_ALARM_COUNTERS 0xFF818580
+#define OID_RT_UTILITY_SELECT_DEBUG_MODE 0xFF818581
+#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER 0xFF818582
+#define OID_RT_UTILITY_GET_RSSI_STATUS 0xFF818583
+#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS 0xFF818584
+#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS \
+ 0xFF818585
+#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS 0xFF818586
+/* */
+
+/* by Owen on 03/09/19-03/09/22 for RTL8185 */
+#define OID_RT_WIRELESS_MODE 0xFF818500
+#define OID_RT_SUPPORTED_RATES 0xFF818501
+#define OID_RT_DESIRED_RATES 0xFF818502
+#define OID_RT_WIRELESS_MODE_STARTING_ADHOC 0xFF818503
+/* */
+
+#define OID_RT_GET_CONNECT_STATE 0xFF030001
+#define OID_RT_RESCAN 0xFF030002
+#define OID_RT_SET_KEY_LENGTH 0xFF030003
+#define OID_RT_SET_DEFAULT_KEY_ID 0xFF030004
+
+#define OID_RT_SET_CHANNEL 0xFF010182
+#define OID_RT_SET_SNIFFER_MODE 0xFF010183
+#define OID_RT_GET_SIGNAL_QUALITY 0xFF010184
+#define OID_RT_GET_SMALL_PACKET_CRC 0xFF010185
+#define OID_RT_GET_MIDDLE_PACKET_CRC 0xFF010186
+#define OID_RT_GET_LARGE_PACKET_CRC 0xFF010187
+#define OID_RT_GET_TX_RETRY 0xFF010188
+#define OID_RT_GET_RX_RETRY 0xFF010189
+#define OID_RT_PRO_SET_FW_DIG_STATE 0xFF01018A/* S */
+#define OID_RT_PRO_SET_FW_RA_STATE 0xFF01018B/* S */
+
+#define OID_RT_GET_RX_TOTAL_PACKET 0xFF010190
+#define OID_RT_GET_TX_BEACON_OK 0xFF010191
+#define OID_RT_GET_TX_BEACON_ERR 0xFF010192
+#define OID_RT_GET_RX_ICV_ERR 0xFF010193
+#define OID_RT_SET_ENCRYPTION_ALGORITHM 0xFF010194
+#define OID_RT_SET_NO_AUTO_RESCAN 0xFF010195
+#define OID_RT_GET_PREAMBLE_MODE 0xFF010196
+#define OID_RT_GET_DRIVER_UP_DELTA_TIME 0xFF010197
+#define OID_RT_GET_AP_IP 0xFF010198
+#define OID_RT_GET_CHANNELPLAN 0xFF010199
+#define OID_RT_SET_PREAMBLE_MODE 0xFF01019A
+#define OID_RT_SET_BCN_INTVL 0xFF01019B
+#define OID_RT_GET_RF_VENDER 0xFF01019C
+#define OID_RT_DEDICATE_PROBE 0xFF01019D
+#define OID_RT_PRO_RX_FILTER_PATTERN 0xFF01019E
+
+#define OID_RT_GET_DCST_CURRENT_THRESHOLD 0xFF01019F
+
+#define OID_RT_GET_CCA_ERR 0xFF0101A0
+#define OID_RT_GET_CCA_UPGRADE_THRESHOLD 0xFF0101A1
+#define OID_RT_GET_CCA_FALLBACK_THRESHOLD 0xFF0101A2
+
+#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES 0xFF0101A3
+#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES 0xFF0101A4
+
+/* by Owen on 03/31/03 for Cameo's request */
+#define OID_RT_SET_RATE_ADAPTIVE 0xFF0101A5
+/* */
+#define OID_RT_GET_DCST_EVALUATE_PERIOD 0xFF0101A5
+#define OID_RT_GET_DCST_TIME_UNIT_INDEX 0xFF0101A6
+#define OID_RT_GET_TOTAL_TX_BYTES 0xFF0101A7
+#define OID_RT_GET_TOTAL_RX_BYTES 0xFF0101A8
+#define OID_RT_CURRENT_TX_POWER_LEVEL 0xFF0101A9
+#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT 0xFF0101AA
+#define OID_RT_GET_ENC_KEY_MATCH_COUNT 0xFF0101AB
+#define OID_RT_GET_CHANNEL 0xFF0101AC
+
+#define OID_RT_SET_CHANNELPLAN 0xFF0101AD
+#define OID_RT_GET_HARDWARE_RADIO_OFF 0xFF0101AE
+#define OID_RT_CHANNELPLAN_BY_COUNTRY 0xFF0101AF
+#define OID_RT_SCAN_AVAILABLE_BSSID 0xFF0101B0
+#define OID_RT_GET_HARDWARE_VERSION 0xFF0101B1
+#define OID_RT_GET_IS_ROAMING 0xFF0101B2
+#define OID_RT_GET_IS_PRIVACY 0xFF0101B3
+#define OID_RT_GET_KEY_MISMATCH 0xFF0101B4
+#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH 0xFF0101B5
+#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH 0xFF0101B6
+#define OID_RT_RESET_LOG 0xFF0101B7
+#define OID_RT_GET_LOG 0xFF0101B8
+#define OID_RT_SET_INDICATE_HIDDEN_AP 0xFF0101B9
+#define OID_RT_GET_HEADER_FAIL 0xFF0101BA
+#define OID_RT_SUPPORTED_WIRELESS_MODE 0xFF0101BB
+#define OID_RT_GET_CHANNEL_LIST 0xFF0101BC
+#define OID_RT_GET_SCAN_IN_PROGRESS 0xFF0101BD
+#define OID_RT_GET_TX_INFO 0xFF0101BE
+#define OID_RT_RF_READ_WRITE_OFFSET 0xFF0101BF
+#define OID_RT_RF_READ_WRITE 0xFF0101C0
+
+/* For Netgear request. 2005.01.13, by rcnjko. */
+#define OID_RT_FORCED_DATA_RATE 0xFF0101C1
+#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST 0xFF0101C2
+/* For Netgear request. 2005.02.17, by rcnjko. */
+#define OID_RT_GET_BSS_WIRELESS_MODE 0xFF0101C3
+/* For AZ project. 2005.06.27, by rcnjko. */
+#define OID_RT_SCAN_WITH_MAGIC_PACKET 0xFF0101C4
+
+/* Vincent 8185MP */
+#define OID_RT_PRO_RX_FILTER 0xFF0111C0
+
+#define OID_CE_USB_WRITE_REGISTRY 0xFF0111C1
+#define OID_CE_USB_READ_REGISTRY 0xFF0111C2
+
+#define OID_RT_PRO_SET_INITIAL_GA 0xFF0111C3
+#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE 0xFF0111C4
+#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE 0xFF0111C5
+#define OID_RT_PRO_SET_TX_CHARGE_PUMP 0xFF0111C6
+#define OID_RT_PRO_SET_RX_CHARGE_PUMP 0xFF0111C7
+#define OID_RT_PRO_RF_WRITE_REGISTRY 0xFF0111C8
+#define OID_RT_PRO_RF_READ_REGISTRY 0xFF0111C9
+#define OID_RT_PRO_QUERY_RF_TYPE 0xFF0111CA
+
+/* AP OID */
+#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST 0xFF010300
+#define OID_RT_AP_GET_CURRENT_TIME_STAMP 0xFF010301
+#define OID_RT_AP_SWITCH_INTO_AP_MODE 0xFF010302
+#define OID_RT_AP_SET_DTIM_PERIOD 0xFF010303
+/* Determine if driver supports AP mode. */
+#define OID_RT_AP_SUPPORTED 0xFF010304
+/* Set WPA-PSK passphrase into authenticator. */
+#define OID_RT_AP_SET_PASSPHRASE 0xFF010305
+
+/* 8187MP. 2004.09.06, by rcnjko. */
+#define OID_RT_PRO8187_WI_POLL 0xFF818780
+#define OID_RT_PRO_WRITE_BB_REG 0xFF818781
+#define OID_RT_PRO_READ_BB_REG 0xFF818782
+#define OID_RT_PRO_WRITE_RF_REG 0xFF818783
+#define OID_RT_PRO_READ_RF_REG 0xFF818784
+
+/* Meeting House. added by Annie, 2005-07-20. */
+#define OID_RT_MH_VENDER_ID 0xFFEDC100
+
+/* 8711 MP OID added 20051230. */
+#define OID_RT_PRO8711_JOIN_BSS 0xFF871100/* S */
+
+#define OID_RT_PRO_READ_REGISTER 0xFF871101 /* Q */
+#define OID_RT_PRO_WRITE_REGISTER 0xFF871102 /* S */
+
+#define OID_RT_PRO_BURST_READ_REGISTER 0xFF871103 /* Q */
+#define OID_RT_PRO_BURST_WRITE_REGISTER 0xFF871104 /* S */
+
+#define OID_RT_PRO_WRITE_TXCMD 0xFF871105 /* S */
+
+#define OID_RT_PRO_READ16_EEPROM 0xFF871106 /* Q */
+#define OID_RT_PRO_WRITE16_EEPROM 0xFF871107 /* S */
+
+#define OID_RT_PRO_H2C_SET_COMMAND 0xFF871108 /* S */
+#define OID_RT_PRO_H2C_QUERY_RESULT 0xFF871109 /* Q */
+
+#define OID_RT_PRO8711_WI_POLL 0xFF87110A /* Q */
+#define OID_RT_PRO8711_PKT_LOSS 0xFF87110B /* Q */
+#define OID_RT_RD_ATTRIB_MEM 0xFF87110C/* Q */
+#define OID_RT_WR_ATTRIB_MEM 0xFF87110D/* S */
+
+
+/* Method 2 for H2C/C2H */
+#define OID_RT_PRO_H2C_CMD_MODE 0xFF871110 /* S */
+#define OID_RT_PRO_H2C_CMD_RSP_MODE 0xFF871111 /* Q */
+#define OID_RT_PRO_H2C_CMD_EVENT_MODE 0xFF871112 /* S */
+#define OID_RT_PRO_WAIT_C2H_EVENT 0xFF871113 /* Q */
+#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST 0xFF871114/* Q */
+
+#define OID_RT_PRO_SCSI_ACCESS_TEST 0xFF871115 /* Q, S */
+
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT 0xFF871116 /* S */
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN 0xFF871117 /* Q,S */
+#define OID_RT_RRO_RX_PKT_VIA_IOCTRL 0xFF871118 /* Q */
+#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL 0xFF871119 /* Q */
+
+#define OID_RT_RPO_SET_PWRMGT_TEST 0xFF87111A /* S */
+#define OID_RT_PRO_QRY_PWRMGT_TEST 0XFF87111B /* Q */
+#define OID_RT_RPO_ASYNC_RWIO_TEST 0xFF87111C /* S */
+#define OID_RT_RPO_ASYNC_RWIO_POLL 0xFF87111D /* Q */
+#define OID_RT_PRO_SET_RF_INTFS 0xFF87111E /* S */
+#define OID_RT_POLL_RX_STATUS 0xFF87111F /* Q */
+
+#define OID_RT_PRO_CFG_DEBUG_MESSAGE 0xFF871120 /* Q,S */
+#define OID_RT_PRO_SET_DATA_RATE_EX 0xFF871121/* S */
+#define OID_RT_PRO_SET_BASIC_RATE 0xFF871122/* S */
+#define OID_RT_PRO_READ_TSSI 0xFF871123/* S */
+#define OID_RT_PRO_SET_POWER_TRACKING 0xFF871124/* S */
+
+
+#define OID_RT_PRO_QRY_PWRSTATE 0xFF871150 /* Q */
+#define OID_RT_PRO_SET_PWRSTATE 0xFF871151 /* S */
+
+/* Method 2 , using workitem */
+#define OID_RT_SET_READ_REG 0xFF871181 /* S */
+#define OID_RT_SET_WRITE_REG 0xFF871182 /* S */
+#define OID_RT_SET_BURST_READ_REG 0xFF871183 /* S */
+#define OID_RT_SET_BURST_WRITE_REG 0xFF871184 /* S */
+#define OID_RT_SET_WRITE_TXCMD 0xFF871185 /* S */
+#define OID_RT_SET_READ16_EEPROM 0xFF871186 /* S */
+#define OID_RT_SET_WRITE16_EEPROM 0xFF871187 /* S */
+#define OID_RT_QRY_POLL_WKITEM 0xFF871188 /* Q */
+
+/* For SDIO INTERFACE only */
+#define OID_RT_PRO_SYNCPAGERW_SRAM 0xFF8711A0 /* Q, S */
+#define OID_RT_PRO_871X_DRV_EXT 0xFF8711A1
+
+/* For USB INTERFACE only */
+#define OID_RT_PRO_USB_VENDOR_REQ 0xFF8711B0 /* Q, S */
+#define OID_RT_PRO_SCSI_AUTO_TEST 0xFF8711B1 /* S */
+#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE 0xFF8711B2 /* S */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_READ 0xFF8711B3 /* Q */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING 0xFF8711B4 /* Q */
+
+#define OID_RT_PRO_H2C_SET_RATE_TABLE 0xFF8711FB /* S */
+#define OID_RT_PRO_H2C_GET_RATE_TABLE 0xFF8711FC /* S */
+#define OID_RT_PRO_H2C_C2H_LBK_TEST 0xFF8711FE
+
+#define OID_RT_PRO_ENCRYPTION_CTRL 0xFF871200 /* Q, S */
+#define OID_RT_PRO_ADD_STA_INFO 0xFF871201 /* S */
+#define OID_RT_PRO_DELE_STA_INFO 0xFF871202 /* S */
+#define OID_RT_PRO_QUERY_DR_VARIABLE 0xFF871203 /* Q */
+
+#define OID_RT_PRO_RX_PACKET_TYPE 0xFF871204 /* Q, S */
+
+#define OID_RT_PRO_READ_EFUSE 0xFF871205 /* Q */
+#define OID_RT_PRO_WRITE_EFUSE 0xFF871206 /* S */
+#define OID_RT_PRO_RW_EFUSE_PGPKT 0xFF871207 /* Q, S */
+#define OID_RT_GET_EFUSE_CURRENT_SIZE 0xFF871208 /* Q */
+
+#define OID_RT_SET_BANDWIDTH 0xFF871209 /* S */
+#define OID_RT_SET_CRYSTAL_CAP 0xFF87120A /* S */
+
+#define OID_RT_SET_RX_PACKET_TYPE 0xFF87120B /* S */
+
+#define OID_RT_GET_EFUSE_MAX_SIZE 0xFF87120C /* Q */
+
+#define OID_RT_PRO_SET_TX_AGC_OFFSET 0xFF87120D /* S */
+
+#define OID_RT_PRO_SET_PKT_TEST_MODE 0xFF87120E /* S */
+
+#define OID_RT_PRO_FOR_EVM_TEST_SETTING 0xFF87120F /* S */
+
+#define OID_RT_PRO_GET_THERMAL_METER 0xFF871210 /* Q */
+
+#define OID_RT_RESET_PHY_RX_PACKET_COUNT 0xFF871211 /* S */
+#define OID_RT_GET_PHY_RX_PACKET_RECEIVED 0xFF871212 /* Q */
+#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR 0xFF871213 /* Q */
+
+#define OID_RT_SET_POWER_DOWN 0xFF871214 /* S */
+
+#define OID_RT_GET_POWER_MODE 0xFF871215 /* Q */
+
+#define OID_RT_PRO_EFUSE 0xFF871216 /* Q, S */
+#define OID_RT_PRO_EFUSE_MAP 0xFF871217 /* Q, S */
+
+#endif /* ifndef __CUSTOM_OID_H */
diff --git a/drivers/staging/rtl8188eu/include/nic_spec.h b/drivers/staging/rtl8188eu/include/nic_spec.h
new file mode 100644
index 0000000..d422447
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/nic_spec.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+
+#ifndef __NIC_SPEC_H__
+#define __NIC_SPEC_H__
+
+#define RTL8711_MCTRL_ (0x20000)
+#define RTL8711_UART_ (0x30000)
+#define RTL8711_TIMER_ (0x40000)
+#define RTL8711_FINT_ (0x50000)
+#define RTL8711_HINT_ (0x50000)
+#define RTL8711_GPIO_ (0x60000)
+#define RTL8711_WLANCTRL_ (0x200000)
+#define RTL8711_WLANFF_ (0xe00000)
+#define RTL8711_HCICTRL_ (0x600000)
+#define RTL8711_SYSCFG_ (0x620000)
+#define RTL8711_SYSCTRL_ (0x620000)
+#define RTL8711_MCCTRL_ (0x020000)
+
+
+#include <rtl8711_regdef.h>
+
+#include <rtl8711_bitdef.h>
+
+
+#endif /* __RTL8711_SPEC_H__ */
--
1.8.1.4
More information about the devel
mailing list