[RFC/RFT 22/33] staging: r8188eu: Add files for new driver - part 22
Larry Finger
Larry.Finger at lwfinger.net
Thu Aug 22 03:34:04 UTC 2013
This commit adds files include/Hal8188EFWImg_CE.h, include/Hal8188EPhyCfg.h,
include/Hal8188EPhyReg.h, include/Hal8188EPwrSeq.h, include/Hal8188ERateAdaptive.h,
include/Hal8188EReg.h, include/HalHWImg8188E_BB.h, include/HalHWImg8188E_FW.h,
include/HalHWImg8188E_MAC.h, include/HalHWImg8188E_RF.h, include/HalPhyRf.h,
include/HalPhyRf_8188e.h, include/HalPwrSeqCmd.h, and include/HalVerDef.h.
Signed-off-by: Larry Finger <Larry.Finger at lwfinger.net>
---
.../staging/rtl8188eu/include/Hal8188EFWImg_CE.h | 28 +
drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h | 276 +++++
drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h | 1094 ++++++++++++++++++++
drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h | 176 ++++
.../rtl8188eu/include/Hal8188ERateAdaptive.h | 75 ++
drivers/staging/rtl8188eu/include/Hal8188EReg.h | 46 +
.../staging/rtl8188eu/include/HalHWImg8188E_BB.h | 44 +
.../staging/rtl8188eu/include/HalHWImg8188E_FW.h | 34 +
.../staging/rtl8188eu/include/HalHWImg8188E_MAC.h | 30 +
.../staging/rtl8188eu/include/HalHWImg8188E_RF.h | 30 +
drivers/staging/rtl8188eu/include/HalPhyRf.h | 30 +
drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h | 63 ++
drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h | 128 +++
drivers/staging/rtl8188eu/include/HalVerDef.h | 167 +++
14 files changed, 2221 insertions(+)
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EReg.h
create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
create mode 100644 drivers/staging/rtl8188eu/include/HalPhyRf.h
create mode 100644 drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
create mode 100644 drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
create mode 100644 drivers/staging/rtl8188eu/include/HalVerDef.h
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h b/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
new file mode 100644
index 0000000..949c33b
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
@@ -0,0 +1,28 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+#ifndef __INC_HAL8188E_FW_IMG_H
+#define __INC_HAL8188E_FW_IMG_H
+
+/* V10(1641) */
+#define Rtl8188EFWImgArrayLength 13904
+
+extern const u8 Rtl8188EFwImgArray[Rtl8188EFWImgArrayLength];
+
+#endif /* __INC_HAL8188E_FW_IMG_H */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
new file mode 100644
index 0000000..c4769e2
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
@@ -0,0 +1,276 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT 5
+#define MAX_STALL_TIME 50 /* us */
+#define AntennaDiversityValue 0x80
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define Reset_Cnt_Limit 3
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define MAX_AGGR_NUM 0x07
+
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+ CmdID_End,
+ CmdID_SetTxPowerLevel,
+ CmdID_BBRegWrite10,
+ CmdID_WritePortUlong,
+ CmdID_WritePortUshort,
+ CmdID_WritePortUchar,
+ CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+ enum sw_chnl_cmd_id CmdID;
+ u32 Para1;
+ u32 Para2;
+ u32 msDelay;
+};
+
+enum hw90_block {
+ HW90_BLOCK_MAC = 0,
+ HW90_BLOCK_PHY0 = 1,
+ HW90_BLOCK_PHY1 = 2,
+ HW90_BLOCK_RF = 3,
+ HW90_BLOCK_MAXIMUM = 4, /* Never use this */
+};
+
+enum rf_radio_path {
+ RF_PATH_A = 0, /* Radio Path A */
+ RF_PATH_B = 1, /* Radio Path B */
+ RF_PATH_C = 2, /* Radio Path C */
+ RF_PATH_D = 3, /* Radio Path D */
+};
+
+#define MAX_PG_GROUP 13
+
+#define RF_PATH_MAX 2
+#define MAX_RF_PATH RF_PATH_MAX
+#define MAX_TX_COUNT 4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
+ *ch9~11, ch12~13, CH 14
+ * total three groups */
+#define CHANNEL_GROUP_MAX_88E 6
+
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0x00,
+ WIRELESS_MODE_A = BIT2,
+ WIRELESS_MODE_B = BIT0,
+ WIRELESS_MODE_G = BIT1,
+ WIRELESS_MODE_AUTO = BIT5,
+ WIRELESS_MODE_N_24G = BIT3,
+ WIRELESS_MODE_N_5G = BIT4,
+ WIRELESS_MODE_AC = BIT6
+};
+
+enum phy_rate_tx_offset_area {
+ RA_OFFSET_LEGACY_OFDM1,
+ RA_OFFSET_LEGACY_OFDM2,
+ RA_OFFSET_HT_OFDM1,
+ RA_OFFSET_HT_OFDM2,
+ RA_OFFSET_HT_OFDM3,
+ RA_OFFSET_HT_OFDM4,
+ RA_OFFSET_HT_CCK,
+};
+
+/* BB/RF related */
+enum RF_TYPE_8190P {
+ RF_TYPE_MIN, /* 0 */
+ RF_8225 = 1, /* 1 11b/g RF for verification only */
+ RF_8256 = 2, /* 2 11b/g/n */
+ RF_8258 = 3, /* 3 11a/b/g/n RF */
+ RF_6052 = 4, /* 4 11b/g/n RF */
+ /* TODO: We should remove this psudo PHY RF after we get new RF. */
+ RF_PSEUDO_11N = 5, /* 5, It is a temporality RF. */
+};
+
+struct bb_reg_def {
+ u32 rfintfs; /* set software control: */
+ /* 0x870~0x877[8 bytes] */
+ u32 rfintfi; /* readback data: */
+ /* 0x8e0~0x8e7[8 bytes] */
+ u32 rfintfo; /* output data: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rfintfe; /* output enable: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rf3wireOffset; /* LSSI data: */
+ /* 0x840~0x84f [16 bytes] */
+ u32 rfLSSI_Select; /* BB Band Select: */
+ /* 0x878~0x87f [8 bytes] */
+ u32 rfTxGainStage; /* Tx gain stage: */
+ /* 0x80c~0x80f [4 bytes] */
+ u32 rfHSSIPara1; /* wire parameter control1 : */
+ /* 0x820~0x823,0x828~0x82b,
+ * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ u32 rfHSSIPara2; /* wire parameter control2 : */
+ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
+ * 0x83c~0x83f [16 bytes] */
+ u32 rfSwitchControl; /* Tx Rx antenna control : */
+ /* 0x858~0x85f [16 bytes] */
+ u32 rfAGCControl1; /* AGC parameter control1 : */
+ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+ * 0xc68~0xc6b [16 bytes] */
+ u32 rfAGCControl2; /* AGC parameter control2 : */
+ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+ * 0xc6c~0xc6f [16 bytes] */
+ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
+ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+ * 0xc2c~0xc2f [16 bytes] */
+ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
+ * Rx DC notch filter : */
+ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+ * 0xc28~0xc2b [16 bytes] */
+ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
+ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+ * 0xc98~0xc9b [16 bytes] */
+ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
+ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+ * 0xc9c~0xc9f [16 bytes] */
+ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
+ /* 0x8a0~0x8af [16 bytes] */
+ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
+ * Path A and B */
+};
+
+struct ant_sel_ofdm {
+ u32 r_tx_antenna:4;
+ u32 r_ant_l:4;
+ u32 r_ant_non_ht:4;
+ u32 r_ant_ht1:4;
+ u32 r_ant_ht2:4;
+ u32 r_ant_ht_s1:4;
+ u32 r_ant_non_ht_s1:4;
+ u32 OFDM_TXSC:2;
+ u32 reserved:2;
+};
+
+struct ant_sel_cck {
+ u8 r_cckrx_enable_2:2;
+ u8 r_cckrx_enable:2;
+ u8 r_ccktx_enable:4;
+};
+
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+/* */
+/* BB and RF register read/write */
+/* */
+u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
+ u32 mask, u32 data);
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+ u32 regaddr, u32 mask, u32 data);
+
+/* Initialization related function */
+/* MAC/BB/RF HAL config */
+int PHY_MACConfig8188E(struct adapter *adapter);
+int PHY_BBConfig8188E(struct adapter *adapter);
+int PHY_RFConfig8188E(struct adapter *adapter);
+
+/* RF config */
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
+ enum rf_radio_path rfpath);
+int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
+ enum rf_radio_path rfpath);
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/* BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
+bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/* Switch bandwidth for 8192S */
+void PHY_SetBWMode8188E(struct adapter *adapter,
+ enum ht_channel_width chnlwidth, unsigned char offset);
+
+/* channel switch related funciton */
+void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
+/* Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/* BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
+ u32 mask, u32 data);
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_QueryBBReg(adapt, regaddr, mask) \
+ rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
+#define PHY_SetBBReg(adapt, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
+#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask) \
+ rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
+#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data) \
+ rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))
+
+#define PHY_SetMacReg PHY_SetBBReg
+
+#define SIC_HW_SUPPORT 0
+
+#define SIC_MAX_POLL_CNT 5
+
+#define SIC_CMD_READY 0
+#define SIC_CMD_WRITE 1
+#define SIC_CMD_READ 2
+
+#define SIC_CMD_REG 0x1EB /* 1byte */
+#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
+#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
+
+#endif /* __INC_HAL8192CPHYCFG_H */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
new file mode 100644
index 0000000..0e06d29
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
@@ -0,0 +1,1094 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYREG_H__
+#define __INC_HAL8188EPHYREG_H__
+/*--------------------------Define Parameters-------------------------------*/
+/* */
+/* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/* 3. RF register 0x00-2E */
+/* 4. Bit Mask for BB/RF register */
+/* 5. Other defintion for BB/RF R/W */
+/* */
+
+
+/* */
+/* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/* 1. Page1(0x100) */
+/* */
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+/* 2. Page2(0x200) */
+/* The following two definition are only used for USB interface. */
+#define RF_BB_CMD_ADDR 0x02c0 /* RF/BB r/w cmd address. */
+#define RF_BB_CMD_DATA 0x02c4 /* RF/BB r/w cmd data. */
+
+/* 3. Page8(0x800) */
+#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC RF BW Setting */
+
+#define rFPGA0_TxInfo 0x804 /* Status report?? */
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
+
+#define rFPGA0_RFTiming1 0x810 /* Useless now */
+#define rFPGA0_RFTiming2 0x814
+
+#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+
+#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
+#define rFPGA0_XB_RFInterfaceOE 0x864
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Iface Software Control */
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
+#define rFPGA0_XCD_RFParameter 0x87c
+
+/* Crystal cap setting RF-R/W protection for parameter4?? */
+#define rFPGA0_AnalogParameter1 0x880
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888
+/* enable ad/da clock1 for dual-phy */
+#define rFPGA0_AdDaClockEn 0x888
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 /* Useless now */
+/* Transceiver A HSPI Readback */
+#define TransceiverA_HSPI_Readback 0x8b8
+/* Transceiver B HSPI Readback */
+#define TransceiverB_HSPI_Readback 0x8bc
+/* Useless now RF Interface Readback Value */
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
+
+/* 4. Page9(0x900) */
+/* RF mode & OFDM TxSC RF BW Setting?? */
+#define rFPGA1_RFMOD 0x900
+
+#define rFPGA1_TxBlock 0x904 /* Useless now */
+#define rFPGA1_DebugSelect 0x908 /* Useless now */
+#define rFPGA1_TxInfo 0x90c /* Useless now Status report */
+
+/* 5. PageA(0xA00) */
+/* Set Control channel to upper or lower - required only for 40MHz */
+#define rCCK0_System 0xa00
+
+/* Disable init gain now Select RX path by RSSI */
+#define rCCK0_AFESetting 0xa04
+/* Disable init gain now Init gain */
+#define rCCK0_CCA 0xa08
+
+/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold,
+ * RX LNA Threshold useless now. Not the same as 90 series */
+#define rCCK0_RxAGC1 0xa0c
+#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
+
+#define rCCK0_RxHP 0xa14
+
+/* Timing recovery & Channel estimation threshold */
+#define rCCK0_DSPParameter1 0xa18
+#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
+#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now */
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 /* 0xa57 */
+#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
+#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
+
+/* */
+/* PageB(0xB00) */
+/* */
+#define rPdp_AntA 0xb00
+#define rPdp_AntA_4 0xb04
+#define rConfig_Pmpd_AntA 0xb28
+#define rConfig_AntA 0xb68
+#define rConfig_AntB 0xb6c
+#define rPdp_AntB 0xb70
+#define rPdp_AntB_4 0xb74
+#define rConfig_Pmpd_AntB 0xb98
+#define rAPK 0xbd8
+
+/* */
+/* 6. PageC(0xC00) */
+/* */
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+/* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define rOFDM0_XARxAFE 0xc10
+#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 /*PD,BW & SBD DM tune init gain*/
+#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
+#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
+#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */
+
+#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
+#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
+#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
+
+#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+
+#define rOFDM0_RxIQExtAnta 0xca0
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+
+
+/* */
+/* 7. PageD(0xD00) */
+/* */
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 /* No setting now */
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
+
+#define rOFDM_ShortCFOAB 0xdac /* No setting now */
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+
+/* */
+/* 8. PageE(0xE00) */
+/* */
+#define rTxAGC_A_Rate18_06 0xe00
+#define rTxAGC_A_Rate54_24 0xe04
+#define rTxAGC_A_CCK1_Mcs32 0xe08
+#define rTxAGC_A_Mcs03_Mcs00 0xe10
+#define rTxAGC_A_Mcs07_Mcs04 0xe14
+#define rTxAGC_A_Mcs11_Mcs08 0xe18
+#define rTxAGC_A_Mcs15_Mcs12 0xe1c
+
+#define rTxAGC_B_Rate18_06 0x830
+#define rTxAGC_B_Rate54_24 0x834
+#define rTxAGC_B_CCK1_55_Mcs32 0x838
+#define rTxAGC_B_Mcs03_Mcs00 0x83c
+#define rTxAGC_B_Mcs07_Mcs04 0x848
+#define rTxAGC_B_Mcs11_Mcs08 0x84c
+#define rTxAGC_B_Mcs15_Mcs12 0x868
+#define rTxAGC_B_CCK11_A_CCK2_11 0x86c
+
+#define rFPGA0_IQK 0xe28
+#define rTx_IQK_Tone_A 0xe30
+#define rRx_IQK_Tone_A 0xe34
+#define rTx_IQK_PI_A 0xe38
+#define rRx_IQK_PI_A 0xe3c
+
+#define rTx_IQK 0xe40
+#define rRx_IQK 0xe44
+#define rIQK_AGC_Pts 0xe48
+#define rIQK_AGC_Rsp 0xe4c
+#define rTx_IQK_Tone_B 0xe50
+#define rRx_IQK_Tone_B 0xe54
+#define rTx_IQK_PI_B 0xe58
+#define rRx_IQK_PI_B 0xe5c
+#define rIQK_AGC_Cont 0xe60
+
+#define rBlue_Tooth 0xe6c
+#define rRx_Wait_CCA 0xe70
+#define rTx_CCK_RFON 0xe74
+#define rTx_CCK_BBON 0xe78
+#define rTx_OFDM_RFON 0xe7c
+#define rTx_OFDM_BBON 0xe80
+#define rTx_To_Rx 0xe84
+#define rTx_To_Tx 0xe88
+#define rRx_CCK 0xe8c
+
+#define rTx_Power_Before_IQK_A 0xe94
+#define rTx_Power_After_IQK_A 0xe9c
+
+#define rRx_Power_Before_IQK_A 0xea0
+#define rRx_Power_Before_IQK_A_2 0xea4
+#define rRx_Power_After_IQK_A 0xea8
+#define rRx_Power_After_IQK_A_2 0xeac
+
+#define rTx_Power_Before_IQK_B 0xeb4
+#define rTx_Power_After_IQK_B 0xebc
+
+#define rRx_Power_Before_IQK_B 0xec0
+#define rRx_Power_Before_IQK_B_2 0xec4
+#define rRx_Power_After_IQK_B 0xec8
+#define rRx_Power_After_IQK_B_2 0xecc
+
+#define rRx_OFDM 0xed0
+#define rRx_Wait_RIFS 0xed4
+#define rRx_TO_Rx 0xed8
+#define rStandby 0xedc
+#define rSleep 0xee0
+#define rPMPD_ANAEN 0xeec
+
+/* */
+/* 7. RF Register 0x00-0x2E (RF 8256) */
+/* RF-0222D 0x00-3F */
+/* */
+/* Zebra1 */
+#define rZebra1_HSSIEnable 0x0 /* Useless now */
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+#define rZebra1_Channel 0x7 /* RF channel switch */
+
+/* endif */
+#define rZebra1_TxGain 0x8 /* Useless now */
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+/* Zebra4 */
+#define rGlobalCtrl 0 /* Useless now */
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+/* RTL8258 */
+#define rRTL8258_TxLPF 0x11 /* Useless now */
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+/* */
+/* RL6052 Register definition */
+/* */
+#define RF_AC 0x00 /* */
+
+#define RF_IQADJ_G1 0x01 /* */
+#define RF_IQADJ_G2 0x02 /* */
+
+#define RF_POW_TRSW 0x05 /* */
+
+#define RF_GAIN_RX 0x06 /* */
+#define RF_GAIN_TX 0x07 /* */
+
+#define RF_TXM_IDAC 0x08 /* */
+#define RF_IPA_G 0x09 /* */
+#define RF_TXBIAS_G 0x0A
+#define RF_TXPA_AG 0x0B
+#define RF_IPA_A 0x0C /* */
+#define RF_TXBIAS_A 0x0D
+#define RF_BS_PA_APSET_G9_G11 0x0E
+#define RF_BS_IQGEN 0x0F /* */
+
+#define RF_MODE1 0x10 /* */
+#define RF_MODE2 0x11 /* */
+
+#define RF_RX_AGC_HP 0x12 /* */
+#define RF_TX_AGC 0x13 /* */
+#define RF_BIAS 0x14 /* */
+#define RF_IPA 0x15 /* */
+#define RF_TXBIAS 0x16
+#define RF_POW_ABILITY 0x17 /* */
+#define RF_CHNLBW 0x18 /* RF channel and BW switch */
+#define RF_TOP 0x19 /* */
+
+#define RF_RX_G1 0x1A /* */
+#define RF_RX_G2 0x1B /* */
+
+#define RF_RX_BB2 0x1C /* */
+#define RF_RX_BB1 0x1D /* */
+
+#define RF_RCK1 0x1E /* */
+#define RF_RCK2 0x1F /* */
+
+#define RF_TX_G1 0x20 /* */
+#define RF_TX_G2 0x21 /* */
+#define RF_TX_G3 0x22 /* */
+
+#define RF_TX_BB1 0x23 /* */
+
+#define RF_T_METER_92D 0x42 /* */
+#define RF_T_METER_88E 0x42 /* */
+#define RF_T_METER 0x24 /* */
+
+#define RF_SYN_G1 0x25 /* RF TX Power control */
+#define RF_SYN_G2 0x26 /* RF TX Power control */
+#define RF_SYN_G3 0x27 /* RF TX Power control */
+#define RF_SYN_G4 0x28 /* RF TX Power control */
+#define RF_SYN_G5 0x29 /* RF TX Power control */
+#define RF_SYN_G6 0x2A /* RF TX Power control */
+#define RF_SYN_G7 0x2B /* RF TX Power control */
+#define RF_SYN_G8 0x2C /* RF TX Power control */
+
+#define RF_RCK_OS 0x30 /* RF TX PA control */
+#define RF_TXPA_G1 0x31 /* RF TX PA control */
+#define RF_TXPA_G2 0x32 /* RF TX PA control */
+#define RF_TXPA_G3 0x33 /* RF TX PA control */
+#define RF_TX_BIAS_A 0x35
+#define RF_TX_BIAS_D 0x36
+#define RF_LOBF_9 0x38
+#define RF_RXRF_A3 0x3C /* */
+#define RF_TRSW 0x3F
+
+#define RF_TXRF_A2 0x41
+#define RF_TXPA_G4 0x46
+#define RF_TXPA_A4 0x4B
+#define RF_0x52 0x52
+#define RF_WE_LUT 0xEF
+
+
+/* */
+/* Bit Mask */
+/* */
+/* 1. Page1(0x100) */
+#define bBBResetB 0x100 /* Useless now? */
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) \
+ ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/* 2. Page8(0x800) */
+#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 /* Useless now */
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bAntennaSelect 0x0300
+
+#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 /* Useless now */
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf /* Reg0x814 */
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 /* T2R */
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 /* change gain at continue Tx */
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+/* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define b3WireDataLength 0x800
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 /* Useless now */
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define bRFSI_TRSW 0x20 /* Useless now */
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+
+#define bLSSIReadAddress 0x7f800000 /* T65 RF */
+
+#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
+
+#define bLSSIReadBackData 0xfffff /* T65 RF */
+
+#define bLSSIReadOKFlag 0x1000 /* Useless now */
+#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+/* Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+#define bADClkPhase 0x4000000
+
+#define b80MClkDelay 0x18000000 /* Useless */
+#define bAFEWatchDogEnable 0x20000000
+
+/* Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */
+#define bXtalCap01 0xc0000000
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 /* Useless */
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+/* 3. Page9(0x900) */
+#define bOFDMTxSC 0x30000000 /* Useless */
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff /* reset debug page and HWord, LWord */
+#define bDebugItem 0xff /* reset debug page and LWord */
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+/* 4. PageA(0xA00) */
+#define bCCKBBMode 0x3 /* Useless */
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0_System 20/40 */
+
+#define bCCKScramble 0x8 /* Useless */
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
+#define bCCKFixedRxAGC 0x8000
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+/* 5. PageC(0xC00) */
+#define bNumOfSTF 0x3 /* Useless */
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 /* threshold for high power */
+#define bRSSI_Gen 0x7f000000 /* threshold for ant diversity */
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+/* 6. PageE(0xE00) */
+#define bSTBCEn 0x4 /* Useless */
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 /* total */
+#define bShortCFOFLength 11 /* fraction */
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf /* Useless */
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 /* Useless */
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 /* Useless */
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+/* Rx Pseduo noise */
+#define bRxPesudoNoiseOn 0x20000000 /* Useless */
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define bZebra1_HSSIEnable 0x8 /* Useless */
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+/* Zebra4 */
+#define bRTL8256RegModeCtrl1 0x100 /* Useless */
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+/* RTL8258 */
+#define bRTL8258_TxLPFBW 0xc /* Useless */
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+
+/* */
+/* Other Definition */
+/* */
+
+/* byte endable for sb_write */
+#define bByte0 0x1 /* Useless */
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMask12Bits 0xfff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#define bRFRegOffsetMask 0xfffff
+
+#define bEnable 0x1 /* Useless */
+#define bDisable 0x0
+
+#define LeftAntenna 0x0 /* Useless */
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 /* 500ms Useless */
+#define tUpdateRxCounter 100 /* 100ms */
+
+#define rateCCK 0 /* Useless */
+#define rateOFDM 1
+#define rateHT 2
+
+/* define Register-End */
+#define bPMAC_End 0x1ff /* Useless */
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+#define bPMACControl 0x0 /* Useless */
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define PathA 0x0 /* Useless */
+#define PathB 0x1
+#define PathC 0x2
+#define PathD 0x3
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
new file mode 100644
index 0000000..20d0b3e
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
@@ -0,0 +1,176 @@
+
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL8188EPWRSEQ_H__
+#define __HAL8188EPWRSEQ_H__
+
+#include "HalPwrSeqCmd.h"
+
+/*
+ Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ There are 6 HW Power States:
+ 0: POFF--Power Off
+ 1: PDN--Power Down
+ 2: CARDEMU--Card Emulation
+ 3: ACT--Active Mode
+ 4: LPS--Low Power State
+ 5: SUS--Suspend
+
+ The transision from different states are defined below
+ TRANS_CARDEMU_TO_ACT
+ TRANS_ACT_TO_CARDEMU
+ TRANS_CARDEMU_TO_SUS
+ TRANS_SUS_TO_CARDEMU
+ TRANS_CARDEMU_TO_PDN
+ TRANS_ACT_TO_LPS
+ TRANS_LPS_TO_ACT
+
+ TRANS_END
+
+ PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+*/
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/ \
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+
+/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/ \
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*. 0x101[1] = 1*/\
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+#define RTL8188E_TRANS_END \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /* */
+
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+
+#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
new file mode 100644
index 0000000..21996a1
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
@@ -0,0 +1,75 @@
+#ifndef __INC_RA_H
+#define __INC_RA_H
+/*++
+Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+ RateAdaptive.h
+
+Abstract:
+ Prototype of RA and related data structure.
+
+Major Change History:
+ When Who What
+ ---------- --------------- -------------------------------
+ 2011-08-12 Page Create.
+--*/
+
+/* Rate adaptive define */
+#define PERENTRY 23
+#define RETRYSIZE 5
+#define RATESIZE 28
+#define TX_RPT2_ITEM_SIZE 8
+
+/* */
+/* TX report 2 format in Rx desc */
+/* */
+#define GET_TX_RPT2_DESC_PKT_LEN_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc, 0, 9)
+#define GET_TX_RPT2_DESC_MACID_VALID_1_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+16, 0, 32)
+#define GET_TX_RPT2_DESC_MACID_VALID_2_88E(__pRxStatusDesc) \
+ LE_BITS_TO_4BYTE(__pRxStatusDesc+20, 0, 32)
+
+#define GET_TX_REPORT_TYPE1_RERTY_0(__pAddr) \
+ LE_BITS_TO_4BYTE(__pAddr, 0, 16)
+#define GET_TX_REPORT_TYPE1_RERTY_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_2(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+3, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_3(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_4(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+1, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_0(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_1(__pAddr) \
+ LE_BITS_TO_1BYTE(__pAddr+4+3, 0, 8)
+
+/* End rate adaptive define */
+
+void ODM_RASupport_Init(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init_all(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetShortGI_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetDecisionRate_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetHwPwrStatus_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+void ODM_RA_UpdateRateInfo_8188E(struct odm_dm_struct *dm_odm, u8 MacID,
+ u8 RateID, u32 RateMask,
+ u8 SGIEnable);
+
+void ODM_RA_SetRSSI_8188E(struct odm_dm_struct *dm_odm, u8 macid,
+ u8 rssi);
+
+void ODM_RA_TxRPT2Handle_8188E(struct odm_dm_struct *dm_odm,
+ u8 *txrpt_buf, u16 txrpt_len,
+ u32 validentry0, u32 validentry1);
+
+void ODM_RA_Set_TxRPT_Time(struct odm_dm_struct *dm_odm, u16 minRptTime);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EReg.h b/drivers/staging/rtl8188eu/include/Hal8188EReg.h
new file mode 100644
index 0000000..d880b0c
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EReg.h
@@ -0,0 +1,46 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/* */
+/* File Name: Hal8188EReg.h */
+/* */
+/* Description: */
+/* */
+/* This file is for RTL8188E register definition. */
+/* */
+/* */
+/* */
+#ifndef __HAL_8188E_REG_H__
+#define __HAL_8188E_REG_H__
+
+/* */
+/* Register Definition */
+/* */
+#define TRX_ANTDIV_PATH 0x860
+#define RX_ANTDIV_PATH 0xb2c
+#define ODM_R_A_AGC_CORE1_8188E 0xc50
+
+
+/* */
+/* Bitmap Definition */
+/* */
+#define BIT_FA_RESET_8188E BIT0
+
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
new file mode 100644
index 0000000..e574521
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_BB_8188E_HW_IMG_H
+#define __INC_BB_8188E_HW_IMG_H
+
+/* static bool CheckCondition(const u32 Condition, const u32 Hex); */
+
+/******************************************************************************
+* AGC_TAB_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_AGC_TAB_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_PHY_REG_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+* PHY_REG_PG.TXT
+******************************************************************************/
+
+void ODM_ReadAndConfig_PHY_REG_PG_8188E(struct odm_dm_struct *dm_odm);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
new file mode 100644
index 0000000..1bf9bc7
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_FW_8188E_HW_IMG_H
+#define __INC_FW_8188E_HW_IMG_H
+
+
+/******************************************************************************
+* FW_AP.TXT
+******************************************************************************/
+/******************************************************************************
+* FW_WoWLAN.TXT
+******************************************************************************/
+#define ArrayLength_8188E_FW_WoWLAN 15764
+extern const u8 Array_8188E_FW_WoWLAN[ArrayLength_8188E_FW_WoWLAN];
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
new file mode 100644
index 0000000..acf78b9
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_MAC_8188E_HW_IMG_H
+#define __INC_MAC_8188E_HW_IMG_H
+
+/******************************************************************************
+* MAC_REG.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_MAC_REG_8188E(struct odm_dm_struct *pDM_Odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
new file mode 100644
index 0000000..8ecb40d
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_RF_8188E_HW_IMG_H
+#define __INC_RF_8188E_HW_IMG_H
+
+/******************************************************************************
+ * RadioA_1T.TXT
+ ******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_RadioA_1T_8188E(struct odm_dm_struct *odm);
+
+#endif /* end of HWIMG_SUPPORT */
diff --git a/drivers/staging/rtl8188eu/include/HalPhyRf.h b/drivers/staging/rtl8188eu/include/HalPhyRf.h
new file mode 100644
index 0000000..1ec4971
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPhyRf.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+ #ifndef __HAL_PHY_RF_H__
+ #define __HAL_PHY_RF_H__
+
+#define ODM_TARGET_CHNL_NUM_2G_5G 59
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+u8 ODM_GetRightChnlPlaceforIQK(u8 chnl);
+
+#endif /* #ifndef __HAL_PHY_RF_H__ */
diff --git a/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
new file mode 100644
index 0000000..fa583f2
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
@@ -0,0 +1,63 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL_PHY_RF_8188E_H__
+#define __HAL_PHY_RF_8188E_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define IQK_DELAY_TIME_88E 10 /* ms */
+#define index_mapping_NUM_88E 15
+#define AVG_THERMAL_NUM_88E 4
+
+
+void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *pDM_Odm,
+ u8 Type, /* 0 = OFDM, 1 = CCK */
+ u8 *pDirection,/* 1 = +(incr) 2 = -(decr) */
+ u32 *pOutWriteVal); /* Tx tracking CCK/OFDM BB
+ * swing index adjust */
+
+
+void odm_TXPowerTrackingCallback_ThermalMeter_8188E(struct adapter *Adapter);
+
+
+/* 1 7. IQK */
+
+void PHY_IQCalibrate_8188E(struct adapter *Adapter, bool ReCovery);
+
+/* LC calibrate */
+void PHY_LCCalibrate_8188E(struct adapter *pAdapter);
+
+/* AP calibrate */
+void PHY_APCalibrate_8188E(struct adapter *pAdapter, s8 delta);
+
+void PHY_DigitalPredistortion_8188E(struct adapter *pAdapter);
+
+void _PHY_SaveADDARegisters(struct adapter *pAdapter, u32 *ADDAReg,
+ u32 *ADDABackup, u32 RegisterNum);
+
+void _PHY_PathADDAOn(struct adapter *pAdapter, u32 *ADDAReg,
+ bool isPathAOn, bool is2T);
+
+void _PHY_MACSettingCalibration(struct adapter *pAdapter, u32 *MACReg,
+ u32 *MACBackup);
+
+void _PHY_PathAStandBy(struct adapter *pAdapter);
+
+#endif /* #ifndef __HAL_PHY_RF_8188E_H__ */
diff --git a/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h b/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
new file mode 100644
index 0000000..d945784
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
@@ -0,0 +1,128 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HALPWRSEQCMD_H__
+#define __HALPWRSEQCMD_H__
+
+#include <drv_types.h>
+
+/*---------------------------------------------*/
+/* 3 The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ 0x00
+ /* offset: the read register offset */
+ /* msk: the mask of the read value */
+ /* value: N/A, left by 0 */
+ /* note: dirver shall implement this function by read & msk */
+
+#define PWR_CMD_WRITE 0x01
+ /* offset: the read register offset */
+ /* msk: the mask of the write bits */
+ /* value: write value */
+ /* note: driver shall implement this cmd by read & msk after write */
+
+#define PWR_CMD_POLLING 0x02
+ /* offset: the read register offset */
+ /* msk: the mask of the polled value */
+ /* value: the value to be polled, masked by the msd field. */
+ /* note: driver shall implement this cmd by */
+ /* do{ */
+ /* if ( (Read(offset) & msk) == (value & msk) ) */
+ /* break; */
+ /* } while (not timeout); */
+
+#define PWR_CMD_DELAY 0x03
+ /* offset: the value to delay */
+ /* msk: N/A */
+ /* value: the unit of delay, 0: us, 1: ms */
+
+#define PWR_CMD_END 0x04
+ /* offset: N/A */
+ /* msk: N/A */
+ /* value: N/A */
+
+/*---------------------------------------------*/
+/* 3 The value of base: 4 bits */
+/*---------------------------------------------*/
+ /* define the base address of each block */
+#define PWR_BASEADDR_MAC 0x00
+#define PWR_BASEADDR_USB 0x01
+#define PWR_BASEADDR_PCIE 0x02
+#define PWR_BASEADDR_SDIO 0x03
+
+/*---------------------------------------------*/
+/* 3 The value of interface_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_INTF_SDIO_MSK BIT(0)
+#define PWR_INTF_USB_MSK BIT(1)
+#define PWR_INTF_PCI_MSK BIT(2)
+#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of fab_msk: 4 bits */
+/*---------------------------------------------*/
+#define PWR_FAB_TSMC_MSK BIT(0)
+#define PWR_FAB_UMC_MSK BIT(1)
+#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of cut_msk: 8 bits */
+/*---------------------------------------------*/
+#define PWR_CUT_TESTCHIP_MSK BIT(0)
+#define PWR_CUT_A_MSK BIT(1)
+#define PWR_CUT_B_MSK BIT(2)
+#define PWR_CUT_C_MSK BIT(3)
+#define PWR_CUT_D_MSK BIT(4)
+#define PWR_CUT_E_MSK BIT(5)
+#define PWR_CUT_F_MSK BIT(6)
+#define PWR_CUT_G_MSK BIT(7)
+#define PWR_CUT_ALL_MSK 0xFF
+
+
+enum pwrseq_cmd_delat_unit {
+ PWRSEQ_DELAY_US,
+ PWRSEQ_DELAY_MS,
+};
+
+struct wl_pwr_cfg {
+ u16 offset;
+ u8 cut_msk;
+ u8 fab_msk:4;
+ u8 interface_msk:4;
+ u8 base:4;
+ u8 cmd:4;
+ u8 msk;
+ u8 value;
+};
+
+#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
+#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
+#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
+#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
+#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
+#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
+#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
+#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
+
+
+/* Prototype of protected function. */
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 CutVersion, u8 FabVersion,
+ u8 InterfaceType, struct wl_pwr_cfg PwrCfgCmd[]);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalVerDef.h b/drivers/staging/rtl8188eu/include/HalVerDef.h
new file mode 100644
index 0000000..97047cf
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalVerDef.h
@@ -0,0 +1,167 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_VERSION_DEF_H__
+#define __HAL_VERSION_DEF_H__
+
+enum HAL_IC_TYPE {
+ CHIP_8192S = 0,
+ CHIP_8188C = 1,
+ CHIP_8192C = 2,
+ CHIP_8192D = 3,
+ CHIP_8723A = 4,
+ CHIP_8188E = 5,
+ CHIP_8881A = 6,
+ CHIP_8812A = 7,
+ CHIP_8821A = 8,
+ CHIP_8723B = 9,
+ CHIP_8192E = 10,
+};
+
+enum HAL_CHIP_TYPE {
+ TEST_CHIP = 0,
+ NORMAL_CHIP = 1,
+ FPGA = 2,
+};
+
+enum HAL_CUT_VERSION {
+ A_CUT_VERSION = 0,
+ B_CUT_VERSION = 1,
+ C_CUT_VERSION = 2,
+ D_CUT_VERSION = 3,
+ E_CUT_VERSION = 4,
+ F_CUT_VERSION = 5,
+ G_CUT_VERSION = 6,
+};
+
+enum HAL_VENDOR {
+ CHIP_VENDOR_TSMC = 0,
+ CHIP_VENDOR_UMC = 1,
+};
+
+enum HAL_RF_TYPE {
+ RF_TYPE_1T1R = 0,
+ RF_TYPE_1T2R = 1,
+ RF_TYPE_2T2R = 2,
+ RF_TYPE_2T3R = 3,
+ RF_TYPE_2T4R = 4,
+ RF_TYPE_3T3R = 5,
+ RF_TYPE_3T4R = 6,
+ RF_TYPE_4T4R = 7,
+};
+
+struct HAL_VERSION {
+ enum HAL_IC_TYPE ICType;
+ enum HAL_CHIP_TYPE ChipType;
+ enum HAL_CUT_VERSION CUTVersion;
+ enum HAL_VENDOR VendorType;
+ enum HAL_RF_TYPE RFType;
+ u8 ROMVer;
+};
+
+/* Get element */
+#define GET_CVID_IC_TYPE(version) (((version).ICType))
+#define GET_CVID_CHIP_TYPE(version) (((version).ChipType))
+#define GET_CVID_RF_TYPE(version) (((version).RFType))
+#define GET_CVID_MANUFACTUER(version) (((version).VendorType))
+#define GET_CVID_CUT_VERSION(version) (((version).CUTVersion))
+#define GET_CVID_ROM_VERSION(version) (((version).ROMVer) & ROM_VERSION_MASK)
+
+/* Common Macro. -- */
+/* HAL_VERSION VersionID */
+
+/* HAL_IC_TYPE_E */
+#define IS_81XXC(version) \
+ (((GET_CVID_IC_TYPE(version) == CHIP_8192C) || \
+ (GET_CVID_IC_TYPE(version) == CHIP_8188C)) ? true : false)
+#define IS_8723_SERIES(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8723A) ? true : false)
+#define IS_92D(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8192D) ? true : false)
+#define IS_8188E(version) \
+ ((GET_CVID_IC_TYPE(version) == CHIP_8188E) ? true : false)
+
+/* HAL_CHIP_TYPE_E */
+#define IS_TEST_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == TEST_CHIP) ? true : false)
+#define IS_NORMAL_CHIP(version) \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false)
+
+/* HAL_CUT_VERSION_E */
+#define IS_A_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == A_CUT_VERSION) ? true : false)
+#define IS_B_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? true : false)
+#define IS_C_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? true : false)
+#define IS_D_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? true : false)
+#define IS_E_CUT(version) \
+ ((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? true : false)
+
+
+/* HAL_VENDOR_E */
+#define IS_CHIP_VENDOR_TSMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_TSMC) ? true : false)
+#define IS_CHIP_VENDOR_UMC(version) \
+ ((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_UMC) ? true : false)
+
+/* HAL_RF_TYPE_E */
+#define IS_1T1R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T1R) ? true : false)
+#define IS_1T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
+#define IS_2T2R(version) \
+ ((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
+
+/* Chip version Macro. -- */
+#define IS_81XXC_TEST_CHIP(version) \
+ ((IS_81XXC(version) && (!IS_NORMAL_CHIP(version))) ? true : false)
+
+#define IS_92C_SERIAL(version) \
+ ((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
+#define IS_81xxC_VENDOR_UMC_A_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_A_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_B_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_B_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_C_CUT(version) \
+ (IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+ (IS_C_CUT(version) ? true : false) : false) : false)
+
+#define IS_NORMAL_CHIP92D(version) \
+ ((IS_92D(version)) ? \
+ ((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false) : false)
+
+#define IS_92D_SINGLEPHY(version) \
+ ((IS_92D(version)) ? (IS_2T2R(version) ? true : false) : false)
+#define IS_92D_C_CUT(version) \
+ ((IS_92D(version)) ? (IS_C_CUT(version) ? true : false) : false)
+#define IS_92D_D_CUT(version) \
+ ((IS_92D(version)) ? (IS_D_CUT(version) ? true : false) : false)
+#define IS_92D_E_CUT(version) \
+ ((IS_92D(version)) ? (IS_E_CUT(version) ? true : false) : false)
+
+#define IS_8723A_A_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_A_CUT(version) ? true : false) : false)
+#define IS_8723A_B_CUT(version) \
+ ((IS_8723_SERIES(version)) ? (IS_B_CUT(version) ? true : false) : false)
+
+#endif
--
1.8.1.4
More information about the devel
mailing list