[PATCH] Staging: olpc_dcon: replace some magic numbers

Andres Salomon dilinger at queued.net
Sat Aug 3 21:16:54 UTC 2013


Please Cc Daniel on these.  Cjb and myself are no longer at olpc. 



On Sat,  3 Aug 2013 22:44:35 +0200
Jens Frederich <jfrederich at gmail.com> wrote:

> This patch replace some magic numbers. I believe it makes
> the driver more readable.
> 
> The magic number 0x26 is the XO system embedded controller
> (EC) command 'DCON power enable/disable'.
> 
> Number 0x41, and 0x42 are special memory controller settings
> register.  The 0x41 initialize bit sequence 0x101 means:
> enable memory power down function and special SDRAM clock
> delay for synchronize SDRAM output and clock signal.
> 
> The 0x42 initialize squence 0x101 is wrong.  According to
> the specification Bit 8 is reserved, thus not in use.
> I removed it.
> 
> Signed-off-by: Jens Frederich <jfrederich at gmail.com>
> 
> diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c
> b/drivers/staging/olpc_dcon/olpc_dcon.c index 7c460f2..5ca4fa4 100644
> --- a/drivers/staging/olpc_dcon/olpc_dcon.c
> +++ b/drivers/staging/olpc_dcon/olpc_dcon.c
> @@ -90,9 +90,10 @@ static int dcon_hw_init(struct dcon_priv *dcon,
> int is_init) 
>  	/* SDRAM setup/hold time */
>  	dcon_write(dcon, 0x3a, 0xc040);
> -	dcon_write(dcon, 0x41, 0x0000);
> -	dcon_write(dcon, 0x41, 0x0101);
> -	dcon_write(dcon, 0x42, 0x0101);
> +	dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000);  /* clear
> option bits */
> +	dcon_write(dcon, DCON_REG_MEM_OPT_A,
> +				MEM_DLL_CLOCK_DELAY |
> MEM_POWER_DOWN);
> +	dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET);
>  
>  	/* Colour swizzle, AA, no passthrough, backlight */
>  	if (is_init) {
> @@ -126,7 +127,7 @@ static int dcon_bus_stabilize(struct dcon_priv
> *dcon, int is_powered_down) power_up:
>  	if (is_powered_down) {
>  		x = 1;
> -		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL,
> 0);
> +		x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1,
> NULL, 0); if (x) {
>  			pr_warn("unable to force dcon to power up:
> %d!\n", x); return x;
> @@ -144,7 +145,7 @@ power_up:
>  		pr_err("unable to stabilize dcon's smbus,
> reasserting power and praying.\n");
> BUG_ON(olpc_board_at_least(olpc_board(0xc2))); x = 0;
> -		olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
> +		olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL,
> 0); msleep(100);
>  		is_powered_down = 1;
>  		goto power_up;	/* argh, stupid hardware.. */
> @@ -208,7 +209,7 @@ static void dcon_sleep(struct dcon_priv *dcon,
> bool sleep) 
>  	if (sleep) {
>  		x = 0;
> -		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL,
> 0);
> +		x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1,
> NULL, 0); if (x)
>  			pr_warn("unable to force dcon to power down:
> %d!\n", x); else
> diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h
> b/drivers/staging/olpc_dcon/olpc_dcon.h index 997bded..524ee49 100644
> --- a/drivers/staging/olpc_dcon/olpc_dcon.h
> +++ b/drivers/staging/olpc_dcon/olpc_dcon.h
> @@ -22,15 +22,24 @@
>  #define MODE_DEBUG	(1<<14)
>  #define MODE_SELFTEST	(1<<15)
>  
> -#define DCON_REG_HRES		2
> -#define DCON_REG_HTOTAL		3
> -#define DCON_REG_HSYNC_WIDTH	4
> -#define DCON_REG_VRES		5
> -#define DCON_REG_VTOTAL		6
> -#define DCON_REG_VSYNC_WIDTH	7
> -#define DCON_REG_TIMEOUT	8
> -#define DCON_REG_SCAN_INT	9
> -#define DCON_REG_BRIGHT		10
> +#define DCON_REG_HRES		0x2
> +#define DCON_REG_HTOTAL		0x3
> +#define DCON_REG_HSYNC_WIDTH	0x4
> +#define DCON_REG_VRES		0x5
> +#define DCON_REG_VTOTAL		0x6
> +#define DCON_REG_VSYNC_WIDTH	0x7
> +#define DCON_REG_TIMEOUT	0x8
> +#define DCON_REG_SCAN_INT	0x9
> +#define DCON_REG_BRIGHT		0x10
> +#define DCON_REG_MEM_OPT_A	0x41
> +#define DCON_REG_MEM_OPT_B	0x42
> +
> +/* Load Delay Locked Loop (DLL) settings for clock delay */
> +#define MEM_DLL_CLOCK_DELAY	(1<<0)
> +/* Memory controller power down function */
> +#define MEM_POWER_DOWN  	(1<<8)
> +/* Memory controller software reset */
> +#define MEM_SOFT_RESET		(1<<0)
>  
>  /* Status values */
>  
> diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h
> index 5bb6e76..2925df3 100644
> --- a/include/linux/olpc-ec.h
> +++ b/include/linux/olpc-ec.h
> @@ -6,6 +6,7 @@
>  #define EC_WRITE_SCI_MASK		0x1b
>  #define EC_WAKE_UP_WLAN			0x24
>  #define EC_WLAN_LEAVE_RESET		0x25
> +#define EC_DCON_POWER_MODE		0x26
>  #define EC_READ_EB_MODE			0x2a
>  #define EC_SET_SCI_INHIBIT		0x32
>  #define EC_SET_SCI_INHIBIT_RELEASE	0x34


More information about the devel mailing list