[PATCH 06/22] staging: comedi: das800: introduce das800_ind_{write, read}()
H Hartley Sweeten
hsweeten at visionengravers.com
Tue Apr 23 01:33:22 UTC 2013
The GAS800_GAIN register contains some bits that enable indirect
writing to additional registers on the board through iobase + 2
and indirect reading of addition registers through iobase + 7.
Introduce some helper functions to handle the indirect register
write/read.
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
drivers/staging/comedi/drivers/das800.c | 62 +++++++++++++++++++++------------
1 file changed, 39 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 18e2ac0..bc8a23e 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -228,6 +228,27 @@ struct das800_private {
volatile int do_bits; /* digital output bits */
};
+static void das800_ind_write(struct comedi_device *dev,
+ unsigned val, unsigned reg)
+{
+ /*
+ * Select dev->iobase + 2 to be desired register
+ * then write to that register.
+ */
+ outb(reg, dev->iobase + DAS800_GAIN);
+ outb(val, dev->iobase + 2);
+}
+
+static unsigned das800_ind_read(struct comedi_device *dev, unsigned reg)
+{
+ /*
+ * Select dev->iobase + 7 to be desired register
+ * then read from that register.
+ */
+ outb(reg, dev->iobase + DAS800_GAIN);
+ return inb(dev->iobase + 7);
+}
+
/* enable_das800 makes the card start taking hardware triggered conversions */
static void enable_das800(struct comedi_device *dev)
{
@@ -239,10 +260,10 @@ static void enable_das800(struct comedi_device *dev)
/* enable fifo-half full interrupts for cio-das802/16 */
if (thisboard->resolution == 16)
outb(CIO_ENHF, dev->iobase + DAS800_GAIN);
- outb(CONV_CONTROL, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be conversion control register */
- outb(CONV_HCEN, dev->iobase + DAS800_CONV_CONTROL); /* enable hardware triggering */
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
- outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1); /* enable card's interrupt */
+ /* enable hardware triggering */
+ das800_ind_write(dev, CONV_HCEN, CONV_CONTROL);
+ /* enable card's interrupt */
+ das800_ind_write(dev, CONTROL1_INTE | devpriv->do_bits, CONTROL1);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
}
@@ -250,9 +271,10 @@ static void enable_das800(struct comedi_device *dev)
static void disable_das800(struct comedi_device *dev)
{
unsigned long irq_flags;
+
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONV_CONTROL, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be conversion control register */
- outb(0x0, dev->iobase + DAS800_CONV_CONTROL); /* disable hardware triggering of conversions */
+ /* disable hardware triggering of conversions */
+ das800_ind_write(dev, 0x0, CONV_CONTROL);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
}
@@ -398,8 +420,8 @@ static int das800_ai_do_cmd(struct comedi_device *dev,
scan = (endChan << 3) | startChan;
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(SCAN_LIMITS, dev->iobase + DAS800_GAIN); /* select base address + 2 to be scan limits register */
- outb(scan, dev->iobase + DAS800_SCAN_LIMITS); /* set scan limits */
+ /* set scan limits */
+ das800_ind_write(dev, scan, SCAN_LIMITS);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* set gain */
@@ -450,9 +472,9 @@ static int das800_ai_do_cmd(struct comedi_device *dev,
}
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONV_CONTROL, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be conversion control register */
- outb(conv_bits, dev->iobase + DAS800_CONV_CONTROL);
+ das800_ind_write(dev, conv_bits, CONV_CONTROL);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+
async->events = 0;
enable_das800(dev);
return 0;
@@ -488,8 +510,7 @@ static irqreturn_t das800_interrupt(int irq, void *d)
/* if hardware conversions are not enabled, then quit */
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select base address + 7 to be STATUS2 register */
- status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
+ status = das800_ind_read(dev, CONTROL1) & STATUS2_HCEN;
/* don't release spinlock yet since we want to make sure no one else disables hardware conversions */
if (status == 0) {
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
@@ -542,9 +563,8 @@ static irqreturn_t das800_interrupt(int irq, void *d)
if (devpriv->count > 0 || devpriv->forever == 1) {
/* Re-enable card's interrupt.
* We already have spinlock, so indirect addressing is safe */
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
- outb(CONTROL1_INTE | devpriv->do_bits,
- dev->iobase + DAS800_CONTROL1);
+ das800_ind_write(dev, CONTROL1_INTE | devpriv->do_bits,
+ CONTROL1);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* otherwise, stop taking data */
} else {
@@ -576,8 +596,7 @@ static int das800_ai_rinsn(struct comedi_device *dev,
chan = CR_CHAN(insn->chanspec);
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
- outb(chan | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
+ das800_ind_write(dev, chan | devpriv->do_bits, CONTROL1);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* set gain / range */
@@ -644,8 +663,7 @@ static int das800_do_wbits(struct comedi_device *dev,
devpriv->do_bits = wbits << 4;
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
- outb(devpriv->do_bits | CONTROL1_INTE, dev->iobase + DAS800_CONTROL1);
+ das800_ind_write(dev, CONTROL1_INTE | devpriv->do_bits, CONTROL1);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
data[1] = wbits;
@@ -661,8 +679,7 @@ static int das800_probe(struct comedi_device *dev)
int board;
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(ID, dev->iobase + DAS800_GAIN);
- id_bits = inb(dev->iobase + DAS800_ID) & 0x3;
+ id_bits = das800_ind_read(dev, ID) & 0x3;
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
board = thisboard - das800_boards;
@@ -801,8 +818,7 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* initialize digital out channels */
spin_lock_irqsave(&dev->spinlock, irq_flags);
- outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
- outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
+ das800_ind_write(dev, CONTROL1_INTE | devpriv->do_bits, CONTROL1);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return 0;
--
1.8.1.4
More information about the devel
mailing list