[PATCH 47/79] staging: comedi: mpc624: use comedi_request_region()
H Hartley Sweeten
hsweeten at visionengravers.com
Tue Apr 9 23:23:31 UTC 2013
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
drivers/staging/comedi/drivers/mpc624.c | 30 +++---------------------------
1 file changed, 3 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index 3b7a53f..8d4527e 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -285,17 +285,11 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
struct mpc624_private *devpriv;
struct comedi_subdevice *s;
- unsigned long iobase;
int ret;
- iobase = it->options[0];
- printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
- if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
- printk(KERN_ERR "I/O port(s) in use\n");
- return -EIO;
- }
-
- dev->iobase = iobase;
+ ret = comedi_request_region(dev, it->options[0], MPC624_SIZE);
+ if (ret)
+ return ret;
devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
if (!devpriv)
@@ -305,48 +299,35 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
switch (it->options[1]) {
case 0:
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
- printk(KERN_INFO "3.52 kHz, ");
break;
case 1:
devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
- printk(KERN_INFO "1.76 kHz, ");
break;
case 2:
devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
- printk(KERN_INFO "880 Hz, ");
break;
case 3:
devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
- printk(KERN_INFO "440 Hz, ");
break;
case 4:
devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
- printk(KERN_INFO "220 Hz, ");
break;
case 5:
devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
- printk(KERN_INFO "110 Hz, ");
break;
case 6:
devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
- printk(KERN_INFO "55 Hz, ");
break;
case 7:
devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
- printk(KERN_INFO "27.5 Hz, ");
break;
case 8:
devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
- printk(KERN_INFO "13.75 Hz, ");
break;
case 9:
devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
- printk(KERN_INFO "6.875 Hz, ");
break;
default:
- printk
- (KERN_ERR "illegal conversion rate setting!"
- " Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
}
@@ -361,23 +342,18 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
switch (it->options[1]) {
default:
s->maxdata = 0x3FFFFFFF;
- printk(KERN_INFO "30 bit, ");
}
switch (it->options[1]) {
case 0:
s->range_table = &range_mpc624_bipolar1;
- printk(KERN_INFO "1.01V]: ");
break;
default:
s->range_table = &range_mpc624_bipolar10;
- printk(KERN_INFO "10.1V]: ");
}
s->len_chanlist = 1;
s->insn_read = mpc624_ai_rinsn;
- printk(KERN_INFO "attached\n");
-
return 1;
}
--
1.8.1.4
More information about the devel
mailing list