[PATCH 17/25] Staging: silicom: checkpatch cleanup: header file whitespace
Daniel Cotey
puff65537 at bansheeslibrary.com
Sat Sep 15 13:09:00 UTC 2012
Whack all the line ending spaces so checkpatch.pl is happy.
Signed-off-by: Daniel Cotey <puff65537 at bansheeslibrary.com>
---
drivers/staging/silicom/libbp_sd.h | 142 ++++++++++++++++++-------------------
1 file changed, 71 insertions(+), 71 deletions(-)
diff --git a/drivers/staging/silicom/libbp_sd.h b/drivers/staging/silicom/libbp_sd.h
index 8fc4006..cba9ba6 100644
--- a/drivers/staging/silicom/libbp_sd.h
+++ b/drivers/staging/silicom/libbp_sd.h
@@ -118,12 +118,12 @@ int get_bypass_slave_sd(int if_index);
*
*13 WD_CTL_CAP The interface has watchdog capabilities to turn to Bypass mode when not reset
* for defined period of time.
- *
+ *
*14 WD_STATUS_CAP The interface can report on the watchdog status (Active/inactive)
- *
+ *
*15 WD_TIMEOUT_CAP The interface can report the time left till watchdog triggers to Bypass mode.
- *
- *16-31 RESERVED
+ *
+ *16-31 RESERVED
*
* **/
int get_bypass_caps_sd(int if_index);
@@ -133,34 +133,34 @@ int get_bypass_caps_sd(int if_index);
* @if_index: network device index
*
* Output:
- *
- * Set of numbers defining the various parameters of the watchdog capable
+ *
+ * Set of numbers defining the various parameters of the watchdog capable
* to be set to as described bellow.
* -1 - on failure (device not support Bypass or it's a slave device)
- *
+ *
* Bit feature description
- *
+ *
* 0-3 WD_MIN_TIME The interface WD minimal time period in 100mS units
- *
- * 4 WD_STEP_TIME The steps of the WD timer in
+ *
+ * 4 WD_STEP_TIME The steps of the WD timer in
* 0 - for linear steps (WD_MIN_TIME * X)
* 1 - for multiply by 2 from previous step (WD_MIN_TIME * 2^X)
- *
- * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X
+ *
+ * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X
* (X bit available for defining the value)
- *
- *
- *
+ *
+ *
+ *
**/
int get_wd_set_caps_sd(int if_index);
/**
* set_bypass - set Bypass state
* @if_index: network device index of the controlling device
- * @bypass_mode: bypass mode (1=on, 0=off)
+ * @bypass_mode: bypass mode (1=on, 0=off)
* Output:
* 0 - on success
- * -1 - on failure (device not support Bypass or it's a slave device)
+ * -1 - on failure (device not support Bypass or it's a slave device)
**/
int set_bypass_sd(int if_index, int bypass_mode);
@@ -169,7 +169,7 @@ int set_bypass_sd(int if_index, int bypass_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - (off/on) on success
- * -1 - on failure (device not support Bypass or it's a slave device)
+ * -1 - on failure (device not support Bypass or it's a slave device)
**/
int get_bypass_sd(int if_index);
@@ -178,7 +178,7 @@ int get_bypass_sd(int if_index);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - (off/on) on success
- * -1 - on failure (device not support Bypass or it's a slave device)
+ * -1 - on failure (device not support Bypass or it's a slave device)
**/
int get_bypass_change_sd(int if_index);
@@ -188,8 +188,8 @@ int get_bypass_change_sd(int if_index);
* @dis_bypass: disable bypass(1=dis, 0=en)
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int set_dis_bypass_sd(int if_index, int dis_bypass);
@@ -198,8 +198,8 @@ int set_dis_bypass_sd(int if_index, int dis_bypass);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (normal Bypass mode/ Disable bypass)
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int get_dis_bypass_sd(int if_index);
@@ -208,9 +208,9 @@ int get_dis_bypass_sd(int if_index);
* @if_index: network device index of the controlling device
* @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis)
* Output:
- * 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * 0 - on success
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int set_bypass_pwoff_sd(int if_index, int bypass_mode);
@@ -219,8 +219,8 @@ int set_bypass_pwoff_sd(int if_index, int bypass_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable bypass at power off state / normal Bypass mode)
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int get_bypass_pwoff_sd(int if_index);
@@ -229,9 +229,9 @@ int get_bypass_pwoff_sd(int if_index);
* @if_index: network device index of the controlling device
* @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis)
* Output:
- * 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * 0 - on success
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int set_bypass_pwup_sd(int if_index, int bypass_mode);
@@ -240,8 +240,8 @@ int set_bypass_pwup_sd(int if_index, int bypass_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable bypass at power up state / normal Bypass mode)
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int get_bypass_pwup_sd(int if_index);
@@ -249,50 +249,50 @@ int get_bypass_pwup_sd(int if_index);
* set_bypass_wd - Set watchdog state
* @if_index: network device index of the controlling device
* @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog timer
- * @ms_timeout_set(output): requested timeout (in ms units),
+ * @ms_timeout_set(output): requested timeout (in ms units),
* that the adapter supports and will be used by the watchdog
* Output:
- * 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * 0 - on success
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set);
/**
* get_bypass_wd - Get watchdog state
* @if_index: network device index of the controlling device
- * @ms_timeout (output): WDT timeout (in ms units),
+ * @ms_timeout (output): WDT timeout (in ms units),
* -1 for unknown wdt status
* 0 if WDT is disabled
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int get_bypass_wd_sd(int if_index, int *ms_timeout_set);
/**
* get_wd_expire_time - Get watchdog expire
* @if_index: network device index of the controlling device
- * @ms_time_left (output): time left till watchdog time expire,
+ * @ms_time_left (output): time left till watchdog time expire,
* -1 if WDT has expired
* 0 if WDT is disabled
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device or unknown wdt status)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device or unknown wdt status)
**/
int get_wd_expire_time_sd(int if_index, int *ms_time_left);
/**
* reset_bypass_wd_timer - Reset watchdog timer
* @if_index: network device index of the controlling device
- *
+ *
* Output:
* 1 - on success
* 0 - watchdog is not configured
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device or unknown wdt status)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device or unknown wdt status)
**/
int reset_bypass_wd_timer_sd(int if_index);
@@ -300,64 +300,64 @@ int reset_bypass_wd_timer_sd(int if_index);
* set_std_nic - Standard NIC mode of operation
* @if_index: network device index of the controlling device
* @nic_mode: 0/1 (Default Bypass mode / Standard NIC mode)
- *
+ *
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int set_std_nic_sd(int if_index, int nic_mode);
/**
* get_std_nic - Get Standard NIC mode setting
* @if_index: network device index of the controlling device
- *
+ *
* Output:
* 0/1 (Default Bypass mode / Standard NIC mode) on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass
+ * or it's a slave device)
**/
int get_std_nic_sd(int if_index);
/**
- * set_tx - set transmitter enable/disable
+ * set_tx - set transmitter enable/disable
* @if_index: network device index of the controlling device
* @tx_state: 0/1 (Transmit Disable / Transmit Enable)
- *
+ *
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation )
+ * -1 - on failure (device is not capable of the operation )
**/
int set_tx_sd(int if_index, int tx_state);
/**
* get_tx - get transmitter state (disable / enable)
* @if_index: network device index of the controlling device
- *
+ *
* Output:
* 0/1 (ransmit Disable / Transmit Enable) on success
- * -1 - on failure (device is not capable of the operation ordevice not support Bypass)
+ * -1 - on failure (device is not capable of the operation ordevice not support Bypass)
**/
int get_tx_sd(int if_index);
/**
- * set_tpl - set TPL enable/disable
+ * set_tpl - set TPL enable/disable
* @if_index: network device index of the controlling device
* @tx_state: 0/1 (TPL Disable / TPL Enable)
- *
+ *
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation )
+ * -1 - on failure (device is not capable of the operation )
**/
int set_tpl_sd(int if_index, int tpl_state);
/**
* get_tpl - get TPL state (disable / enable)
* @if_index: network device index of the controlling device
- *
+ *
* Output:
* 0/1 (TPL Disable / TPL Enable) on success
- * -1 - on failure (device is not capable of the operation)
+ * -1 - on failure (device is not capable of the operation)
**/
int get_tpl_sd(int if_index);
@@ -368,10 +368,10 @@ int set_bp_hw_reset_sd(int if_index, int status);
/**
* set_tap - set TAP state
* @if_index: network device index of the controlling device
- * @tap_mode: 1 tap mode , 0 normal nic mode
+ * @tap_mode: 1 tap mode , 0 normal nic mode
* Output:
* 0 - on success
- * -1 - on failure (device not support TAP or it's a slave device)
+ * -1 - on failure (device not support TAP or it's a slave device)
**/
int set_tap_sd(int if_index, int tap_mode);
@@ -380,7 +380,7 @@ int set_tap_sd(int if_index, int tap_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - (off/on) on success
- * -1 - on failure (device not support TAP or it's a slave device)
+ * -1 - on failure (device not support TAP or it's a slave device)
**/
int get_tap_sd(int if_index);
@@ -389,7 +389,7 @@ int get_tap_sd(int if_index);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - (off/on) on success
- * -1 - on failure (device not support TAP or it's a slave device)
+ * -1 - on failure (device not support TAP or it's a slave device)
**/
int get_tap_change_sd(int if_index);
@@ -399,8 +399,8 @@ int get_tap_change_sd(int if_index);
* @dis_tap: disable tap(1=dis, 0=en)
* Output:
* 0 - on success
- * -1 - on failure (device is not capable of the operation ordevice not support TAP
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support TAP
+ * or it's a slave device)
**/
int set_dis_tap_sd(int if_index, int dis_tap);
@@ -409,8 +409,8 @@ int set_dis_tap_sd(int if_index, int dis_tap);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (normal TAP mode/ Disable TAP)
- * -1 - on failure (device is not capable of the operation ordevice not support TAP
- * or it's a slave device)
+ * -1 - on failure (device is not capable of the operation ordevice not support TAP
+ * or it's a slave device)
**/
int get_dis_tap_sd(int if_index);
@@ -419,7 +419,7 @@ int get_dis_tap_sd(int if_index);
* @if_index: network device index of the controlling device
* @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis)
* Output:
- * 0 - on success
+ * 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
**/
--
1.7.11.4
More information about the devel
mailing list