[PATCH 27/38] staging: comedi: mite: replace printk() calls
Ian Abbott
abbotti at mev.co.uk
Fri Sep 14 16:34:24 UTC 2012
Replace the `printk()` calls in this module with `dev_...()` calls where
possible or `pr_...()` calls otherwise.
Rework the normally ifdefed out (by the `DEBUG_MITE` macro)
`mite_dump_regs()` to dump register offsets instead of remapped
addresses.
Signed-off-by: Ian Abbott <abbotti at mev.co.uk>
---
drivers/staging/comedi/drivers/mite.c | 180 ++++++++++++++++------------------
drivers/staging/comedi/drivers/mite.h | 4 +-
2 files changed, 89 insertions(+), 95 deletions(-)
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index c67a94d..b63f86c 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -49,6 +49,8 @@
/* #define USE_KMALLOC */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "mite.h"
#include "comedi_fc.h"
@@ -75,7 +77,7 @@ static void mite_init(void)
mite = kzalloc(sizeof(*mite), GFP_KERNEL);
if (!mite) {
- printk(KERN_ERR "mite: allocation failed\n");
+ pr_err("allocation failed\n");
pci_dev_put(pcidev);
return;
}
@@ -94,14 +96,12 @@ static void mite_init(void)
static void dump_chip_signature(u32 csigr_bits)
{
- printk(KERN_INFO "mite: version = %i, type = %i, mite mode = %i,"
- "interface mode = %i\n",
- mite_csigr_version(csigr_bits), mite_csigr_type(csigr_bits),
- mite_csigr_mmode(csigr_bits), mite_csigr_imode(csigr_bits));
- printk(KERN_INFO "mite: num channels = %i, write post fifo depth = %i,"
- "wins = %i, iowins = %i\n",
- mite_csigr_dmac(csigr_bits), mite_csigr_wpdep(csigr_bits),
- mite_csigr_wins(csigr_bits), mite_csigr_iowins(csigr_bits));
+ pr_info("version = %i, type = %i, mite mode = %i, interface mode = %i\n",
+ mite_csigr_version(csigr_bits), mite_csigr_type(csigr_bits),
+ mite_csigr_mmode(csigr_bits), mite_csigr_imode(csigr_bits));
+ pr_info("num channels = %i, write post fifo depth = %i, wins = %i, iowins = %i\n",
+ mite_csigr_dmac(csigr_bits), mite_csigr_wpdep(csigr_bits),
+ mite_csigr_wins(csigr_bits), mite_csigr_iowins(csigr_bits));
}
unsigned mite_fifo_size(struct mite_struct *mite, unsigned channel)
@@ -121,7 +121,8 @@ int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1)
unsigned unknown_dma_burst_bits;
if (comedi_pci_enable(mite->pcidev, "mite")) {
- printk(KERN_ERR "error enabling mite and requesting io regions\n");
+ dev_err(&mite->pcidev->dev,
+ "error enabling mite and requesting io regions\n");
return -EIO;
}
pci_set_master(mite->pcidev);
@@ -130,11 +131,10 @@ int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1)
mite->mite_phys_addr = addr;
mite->mite_io_addr = ioremap(addr, PCI_MITE_SIZE);
if (!mite->mite_io_addr) {
- printk(KERN_ERR "Failed to remap mite io memory address\n");
+ dev_err(&mite->pcidev->dev,
+ "Failed to remap mite io memory address\n");
return -ENOMEM;
}
- printk(KERN_INFO "MITE:0x%08llx mapped to %p ",
- (unsigned long long)mite->mite_phys_addr, mite->mite_io_addr);
addr = pci_resource_start(mite->pcidev, 1);
mite->daq_phys_addr = addr;
@@ -145,15 +145,15 @@ int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1)
*/
mite->daq_io_addr = ioremap(mite->daq_phys_addr, length);
if (!mite->daq_io_addr) {
- printk(KERN_ERR "Failed to remap daq io memory address\n");
+ dev_err(&mite->pcidev->dev,
+ "Failed to remap daq io memory address\n");
return -ENOMEM;
}
- printk(KERN_INFO "DAQ:0x%08llx mapped to %p\n",
- (unsigned long long)mite->daq_phys_addr, mite->daq_io_addr);
if (use_iodwbsr_1) {
writel(0, mite->mite_io_addr + MITE_IODWBSR);
- printk(KERN_INFO "mite: using I/O Window Base Size register 1\n");
+ dev_info(&mite->pcidev->dev,
+ "using I/O Window Base Size register 1\n");
writel(mite->daq_phys_addr | WENAB |
MITE_IODWBSR_1_WSIZE_bits(length),
mite->mite_io_addr + MITE_IODWBSR_1);
@@ -178,9 +178,9 @@ int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1)
csigr_bits = readl(mite->mite_io_addr + MITE_CSIGR);
mite->num_channels = mite_csigr_dmac(csigr_bits);
if (mite->num_channels > MAX_MITE_DMA_CHANNELS) {
- printk(KERN_WARNING "mite: bug? chip claims to have %i dma "
- "channels. Setting to %i.\n",
- mite->num_channels, MAX_MITE_DMA_CHANNELS);
+ dev_warn(&mite->pcidev->dev,
+ "mite: bug? chip claims to have %i dma channels. Setting to %i.\n",
+ mite->num_channels, MAX_MITE_DMA_CHANNELS);
mite->num_channels = MAX_MITE_DMA_CHANNELS;
}
dump_chip_signature(csigr_bits);
@@ -193,7 +193,7 @@ int mite_setup2(struct mite_struct *mite, unsigned use_iodwbsr_1)
mite->mite_io_addr + MITE_CHCR(i));
}
mite->fifo_size = mite_fifo_size(mite, 0);
- printk(KERN_INFO "mite: fifo size is %i.\n", mite->fifo_size);
+ dev_info(&mite->pcidev->dev, "fifo size is %i.\n", mite->fifo_size);
mite->used = 1;
return 0;
@@ -245,15 +245,13 @@ void mite_list_devices(void)
{
struct mite_struct *mite, *next;
- printk(KERN_INFO "Available NI device IDs:");
+ pr_info("Available NI device IDs:\n");
if (mite_devices)
for (mite = mite_devices; mite; mite = next) {
next = mite->next;
- printk(KERN_INFO " 0x%04x", mite_device_id(mite));
- if (mite->used)
- printk(KERN_INFO "(used)");
+ pr_info("0x%04x%s\n", mite_device_id(mite),
+ mite->used ? " (used)" : "");
}
- printk(KERN_INFO "\n");
}
EXPORT_SYMBOL(mite_list_devices);
@@ -352,7 +350,7 @@ void mite_dma_arm(struct mite_channel *mite_chan)
int chor;
unsigned long flags;
- MDPRINTK("mite_dma_arm ch%i\n", channel);
+ MDPRINTK("mite_dma_arm ch%i\n", mite_chan->channel);
/*
* memory barrier is intended to insure any twiddling with the buffer
* is done before writing to the mite to arm dma transfer
@@ -400,7 +398,8 @@ int mite_buf_change(struct mite_dma_descriptor_ring *ring,
n_links * sizeof(struct mite_dma_descriptor),
&ring->descriptors_dma_addr, GFP_KERNEL);
if (!ring->descriptors) {
- printk(KERN_ERR "mite: ring buffer allocation failed\n");
+ dev_err(async->subdevice->device->class_dev,
+ "mite: ring buffer allocation failed\n");
return -ENOMEM;
}
ring->n_links = n_links;
@@ -477,8 +476,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
mcr |= CR_PSIZE32;
break;
default:
- printk(KERN_WARNING "mite: bug! invalid mem bit width for dma "
- "transfer\n");
+ pr_warn("bug! invalid mem bit width for dma transfer\n");
break;
}
writel(mcr, mite->mite_io_addr + MITE_MCR(mite_chan->channel));
@@ -497,8 +495,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
dcr |= CR_PSIZE32;
break;
default:
- printk(KERN_WARNING "mite: bug! invalid dev bit width for dma "
- "transfer\n");
+ pr_warn("bug! invalid dev bit width for dma transfer\n");
break;
}
writel(dcr, mite->mite_io_addr + MITE_DCR(mite_chan->channel));
@@ -612,7 +609,8 @@ int mite_sync_input_dma(struct mite_channel *mite_chan,
nbytes = mite_bytes_written_to_memory_lb(mite_chan);
if ((int)(mite_bytes_written_to_memory_ub(mite_chan) -
old_alloc_count) > 0) {
- printk("mite: DMA overwrite of free area\n");
+ dev_warn(async->subdevice->device->class_dev,
+ "mite: DMA overwrite of free area\n");
async->events |= COMEDI_CB_OVERFLOW;
return -1;
}
@@ -656,7 +654,8 @@ int mite_sync_output_dma(struct mite_channel *mite_chan,
(int)(nbytes_ub - stop_count) > 0)
nbytes_ub = stop_count;
if ((int)(nbytes_ub - old_alloc_count) > 0) {
- printk(KERN_ERR "mite: DMA underrun\n");
+ dev_warn(async->subdevice->device->class_dev,
+ "mite: DMA underrun\n");
async->events |= COMEDI_CB_OVERFLOW;
return -1;
}
@@ -707,8 +706,6 @@ EXPORT_SYMBOL(mite_done);
#ifdef DEBUG_MITE
-static void mite_decode(char **bit_str, unsigned int bits);
-
/* names of bits in mite registers */
static const char *const mite_CHOR_strings[] = {
@@ -778,70 +775,67 @@ static const char *const mite_CHSR_strings[] = {
"28", "lpauses", "30", "int",
};
-void mite_dump_regs(struct mite_channel *mite_chan)
-{
- unsigned long mite_io_addr =
- (unsigned long)mite_chan->mite->mite_io_addr;
- unsigned long addr = 0;
- unsigned long temp = 0;
-
- printk(KERN_DEBUG "mite_dump_regs ch%i\n", mite_chan->channel);
- printk(KERN_DEBUG "mite address is =0x%08lx\n", mite_io_addr);
-
- addr = mite_io_addr + MITE_CHOR(channel);
- printk(KERN_DEBUG "mite status[CHOR]at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_CHOR_strings, temp);
- addr = mite_io_addr + MITE_CHCR(channel);
- printk(KERN_DEBUG "mite status[CHCR]at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_CHCR_strings, temp);
- addr = mite_io_addr + MITE_TCR(channel);
- printk(KERN_DEBUG "mite status[TCR] at 0x%08lx =0x%08x\n", addr,
- readl(addr));
- addr = mite_io_addr + MITE_MCR(channel);
- printk(KERN_DEBUG "mite status[MCR] at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_MCR_strings, temp);
-
- addr = mite_io_addr + MITE_MAR(channel);
- printk(KERN_DEBUG "mite status[MAR] at 0x%08lx =0x%08x\n", addr,
- readl(addr));
- addr = mite_io_addr + MITE_DCR(channel);
- printk(KERN_DEBUG "mite status[DCR] at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_DCR_strings, temp);
- addr = mite_io_addr + MITE_DAR(channel);
- printk(KERN_DEBUG "mite status[DAR] at 0x%08lx =0x%08x\n", addr,
- readl(addr));
- addr = mite_io_addr + MITE_LKCR(channel);
- printk(KERN_DEBUG "mite status[LKCR]at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_LKCR_strings, temp);
- addr = mite_io_addr + MITE_LKAR(channel);
- printk(KERN_DEBUG "mite status[LKAR]at 0x%08lx =0x%08x\n", addr,
- readl(addr));
- addr = mite_io_addr + MITE_CHSR(channel);
- printk(KERN_DEBUG "mite status[CHSR]at 0x%08lx =0x%08lx\n", addr,
- temp = readl(addr));
- mite_decode(mite_CHSR_strings, temp);
- addr = mite_io_addr + MITE_FCR(channel);
- printk(KERN_DEBUG "mite status[FCR] at 0x%08lx =0x%08x\n\n", addr,
- readl(addr));
-}
-EXPORT_SYMBOL(mite_dump_regs);
-
-static void mite_decode(char **bit_str, unsigned int bits)
+static void mite_decode(const char *const *bit_str, unsigned int bits)
{
int i;
for (i = 31; i >= 0; i--) {
if (bits & (1 << i))
- printk(KERN_DEBUG " %s", bit_str[i]);
+ pr_debug(" %s\n", bit_str[i]);
}
- printk(KERN_DEBUG "\n");
}
-EXPORT_SYMBOL(mite_decode);
+
+void mite_dump_regs(struct mite_channel *mite_chan)
+{
+ void __iomem *mite_io_addr = mite_chan->mite->mite_io_addr;
+ unsigned int offset;
+ unsigned int value;
+ int channel = mite_chan->channel;
+
+ pr_debug("mite_dump_regs ch%i\n", channel);
+ pr_debug("mite address is =%p\n", mite_io_addr);
+
+ offset = MITE_CHOR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[CHOR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_CHOR_strings, value);
+ offset = MITE_CHCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[CHCR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_CHCR_strings, value);
+ offset = MITE_TCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[TCR] at 0x%08x =0x%08x\n", offset, value);
+ offset = MITE_MCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[MCR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_MCR_strings, value);
+ offset = MITE_MAR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[MAR] at 0x%08x =0x%08x\n", offset, value);
+ offset = MITE_DCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[DCR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_DCR_strings, value);
+ offset = MITE_DAR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[DAR] at 0x%08x =0x%08x\n", offset, value);
+ offset = MITE_LKCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[LKCR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_LKCR_strings, value);
+ offset = MITE_LKAR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[LKAR] at 0x%08x =0x%08x\n", offset, value);
+ offset = MITE_CHSR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[CHSR] at 0x%08x =0x%08x\n", offset, value);
+ mite_decode(mite_CHSR_strings, value);
+ offset = MITE_FCR(channel);
+ value = readl(mite_io_addr + offset);
+ pr_debug("mite status[FCR] at 0x%08x =0x%08x\n", offset, value);
+}
+EXPORT_SYMBOL(mite_dump_regs);
#endif
#ifdef MODULE
diff --git a/drivers/staging/comedi/drivers/mite.h b/drivers/staging/comedi/drivers/mite.h
index 0c5736c..c5157c3 100644
--- a/drivers/staging/comedi/drivers/mite.h
+++ b/drivers/staging/comedi/drivers/mite.h
@@ -32,9 +32,9 @@
#define PCIMIO_COMPAT
#ifdef DEBUG_MITE
-#define MDPRINTK(format, args...) printk(format , ## args)
+#define MDPRINTK(format, args...) pr_debug(format , ## args)
#else
-#define MDPRINTK(format, args...)
+#define MDPRINTK(format, args...) do { } while (0)
#endif
#define MAX_MITE_DMA_CHANNELS 8
--
1.7.12
More information about the devel
mailing list