[PATCH 10/12] staging: comedi: dt3000: remove dev_dbg() noise
H Hartley Sweeten
hartleys at visionengravers.com
Fri Oct 26 00:26:40 UTC 2012
Remove most of the dev_dbg() output from this driver. Most of it
is just noise.
For now I have left the dev_dbg() in the dt3k_send_cmd() function.
I still have not quite figured out how the low-level i/o works in
this driver...
Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
drivers/staging/comedi/drivers/dt3000.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 347527f..dba5484 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -348,8 +348,6 @@ static void dt3k_ai_empty_fifo(struct comedi_device *dev,
if (count < 0)
count += AI_FIFO_DEPTH;
- dev_dbg(dev->class_dev, "reading %d samples\n", count);
-
rear = devpriv->ai_rear;
for (i = 0; i < count; i++) {
@@ -571,7 +569,6 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
int ret;
unsigned int mode;
- dev_dbg(dev->class_dev, "dt3k_ai_cmd:\n");
for (i = 0; i < cmd->chanlist_len; i++) {
chan = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
@@ -582,15 +579,12 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
aref = CR_AREF(cmd->chanlist[0]);
writew(cmd->scan_end_arg, devpriv->io_addr + DPR_Params(0));
- dev_dbg(dev->class_dev, "param[0]=0x%04x\n", cmd->scan_end_arg);
if (cmd->convert_src == TRIG_TIMER) {
divider = dt3k_ns_to_timer(50, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((divider >> 16), devpriv->io_addr + DPR_Params(1));
- dev_dbg(dev->class_dev, "param[1]=0x%04x\n", divider >> 16);
writew((divider & 0xffff), devpriv->io_addr + DPR_Params(2));
- dev_dbg(dev->class_dev, "param[2]=0x%04x\n", divider & 0xffff);
} else {
/* not supported */
}
@@ -599,21 +593,16 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
tscandiv = dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((tscandiv >> 16), devpriv->io_addr + DPR_Params(3));
- dev_dbg(dev->class_dev, "param[3]=0x%04x\n", tscandiv >> 16);
writew((tscandiv & 0xffff), devpriv->io_addr + DPR_Params(4));
- dev_dbg(dev->class_dev, "param[4]=0x%04x\n", tscandiv & 0xffff);
} else {
/* not supported */
}
mode = DT3000_AD_RETRIG_INTERNAL | 0 | 0;
writew(mode, devpriv->io_addr + DPR_Params(5));
- dev_dbg(dev->class_dev, "param[5]=0x%04x\n", mode);
writew(aref == AREF_DIFF, devpriv->io_addr + DPR_Params(6));
- dev_dbg(dev->class_dev, "param[6]=0x%04x\n", aref == AREF_DIFF);
writew(AI_FIFO_DEPTH / 2, devpriv->io_addr + DPR_Params(7));
- dev_dbg(dev->class_dev, "param[7]=0x%04x\n", AI_FIFO_DEPTH / 2);
writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
ret = dt3k_send_cmd(dev, CMD_CONFIG);
--
1.7.11
More information about the devel
mailing list