[PATCH 02/19] staging: comedi: cb_pcidda: remove code in #if 0/#endif blocks

[H Hartley Sweeten]

The functions cb_pcidda_ai_cmd(), cb_pcidda_ai_cmdtest(), and
cb_pcidda_ns_to_timer() are all partially coded stubs for command
support with the analog output subdevice. Just remove the code
since it is #if 0'ed out. It can be added back later if command
support is completed.

Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
 drivers/staging/comedi/drivers/cb_pcidda.c | 168 -----------------------------
 1 file changed, 168 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 06e546f..5f3242c 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -217,170 +217,6 @@ struct cb_pcidda_private {
 	u16 eeprom_data[EEPROM_SIZE];	/*  software copy of board's eeprom */
 };
 
-/*
- * I will program this later... ;-)
- */
-#if 0
-static int cb_pcidda_ai_cmd(struct comedi_device *dev,
-			    struct comedi_subdevice *s)
-{
-	printk("cb_pcidda_ai_cmd\n");
-	printk("subdev: %d\n", cmd->subdev);
-	printk("flags: %d\n", cmd->flags);
-	printk("start_src: %d\n", cmd->start_src);
-	printk("start_arg: %d\n", cmd->start_arg);
-	printk("scan_begin_src: %d\n", cmd->scan_begin_src);
-	printk("convert_src: %d\n", cmd->convert_src);
-	printk("convert_arg: %d\n", cmd->convert_arg);
-	printk("scan_end_src: %d\n", cmd->scan_end_src);
-	printk("scan_end_arg: %d\n", cmd->scan_end_arg);
-	printk("stop_src: %d\n", cmd->stop_src);
-	printk("stop_arg: %d\n", cmd->stop_arg);
-	printk("chanlist_len: %d\n", cmd->chanlist_len);
-}
-#endif
-
-#if 0
-static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_cmd *cmd)
-{
-	int err = 0;
-	int tmp;
-
-	/* Step 1 : check if triggers are trivially valid */
-
-	err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
-	err |= cfc_check_trigger_src(&cmd->scan_begin_src,
-					TRIG_TIMER | TRIG_EXT);
-	err |= cfc_check_trigger_src(&cmd->convert_src,
-					TRIG_TIMER | TRIG_EXT);
-	err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
-	err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
-
-	if (err)
-		return 1;
-
-	/* Step 2a : make sure trigger sources are unique */
-
-	err |= cfc_check_trigger_is_unique(cmd->scan_begin_src);
-	err |= cfc_check_trigger_is_unique(cmd->convert_src);
-	err |= cfc_check_trigger_is_unique(cmd->stop_src);
-
-	/* Step 2b : and mutually compatible */
-
-	if (err)
-		return 2;
-
-	/* step 3: make sure arguments are trivially compatible */
-
-	if (cmd->start_arg != 0) {
-		cmd->start_arg = 0;
-		err++;
-	}
-#define MAX_SPEED	10000	/* in nanoseconds */
-#define MIN_SPEED	1000000000	/* in nanoseconds */
-
-	if (cmd->scan_begin_src == TRIG_TIMER) {
-		if (cmd->scan_begin_arg < MAX_SPEED) {
-			cmd->scan_begin_arg = MAX_SPEED;
-			err++;
-		}
-		if (cmd->scan_begin_arg > MIN_SPEED) {
-			cmd->scan_begin_arg = MIN_SPEED;
-			err++;
-		}
-	} else {
-		/* external trigger */
-		/* should be level/edge, hi/lo specification here */
-		/* should specify multiple external triggers */
-		if (cmd->scan_begin_arg > 9) {
-			cmd->scan_begin_arg = 9;
-			err++;
-		}
-	}
-	if (cmd->convert_src == TRIG_TIMER) {
-		if (cmd->convert_arg < MAX_SPEED) {
-			cmd->convert_arg = MAX_SPEED;
-			err++;
-		}
-		if (cmd->convert_arg > MIN_SPEED) {
-			cmd->convert_arg = MIN_SPEED;
-			err++;
-		}
-	} else {
-		/* external trigger */
-		/* see above */
-		if (cmd->convert_arg > 9) {
-			cmd->convert_arg = 9;
-			err++;
-		}
-	}
-
-	if (cmd->scan_end_arg != cmd->chanlist_len) {
-		cmd->scan_end_arg = cmd->chanlist_len;
-		err++;
-	}
-	if (cmd->stop_src == TRIG_COUNT) {
-		if (cmd->stop_arg > 0x00ffffff) {
-			cmd->stop_arg = 0x00ffffff;
-			err++;
-		}
-	} else {
-		/* TRIG_NONE */
-		if (cmd->stop_arg != 0) {
-			cmd->stop_arg = 0;
-			err++;
-		}
-	}
-
-	if (err)
-		return 3;
-
-	/* step 4: fix up any arguments */
-
-	if (cmd->scan_begin_src == TRIG_TIMER) {
-		tmp = cmd->scan_begin_arg;
-		cb_pcidda_ns_to_timer(&cmd->scan_begin_arg,
-				      cmd->flags & TRIG_ROUND_MASK);
-		if (tmp != cmd->scan_begin_arg)
-			err++;
-	}
-	if (cmd->convert_src == TRIG_TIMER) {
-		tmp = cmd->convert_arg;
-		cb_pcidda_ns_to_timer(&cmd->convert_arg,
-				      cmd->flags & TRIG_ROUND_MASK);
-		if (tmp != cmd->convert_arg)
-			err++;
-		if (cmd->scan_begin_src == TRIG_TIMER &&
-		    cmd->scan_begin_arg <
-		    cmd->convert_arg * cmd->scan_end_arg) {
-			cmd->scan_begin_arg =
-			    cmd->convert_arg * cmd->scan_end_arg;
-			err++;
-		}
-	}
-
-	if (err)
-		return 4;
-
-	return 0;
-}
-#endif
-
-/* This function doesn't require a particular form, this is just
- * what happens to be used in some of the drivers.  It should
- * convert ns nanoseconds to a counter value suitable for programming
- * the device.  Also, it should adjust ns so that it cooresponds to
- * the actual time that the device will use. */
-#if 0
-static int cb_pcidda_ns_to_timer(unsigned int *ns, int round)
-{
-	/* trivial timer */
-	return *ns;
-}
-#endif
-
 /* lowlevel read from eeprom */
 static unsigned int cb_pcidda_serial_in(struct comedi_device *dev)
 {
@@ -694,10 +530,6 @@ static int cb_pcidda_attach_pci(struct comedi_device *dev,
 	s->range_table = thisboard->ranges;
 	s->insn_write = cb_pcidda_ao_winsn;
 
-	/* s->subdev_flags |= SDF_CMD_READ; */
-	/* s->do_cmd = cb_pcidda_ai_cmd; */
-	/* s->do_cmdtest = cb_pcidda_ai_cmdtest; */
-
 	/*  two 8255 digital io subdevices */
 	s = &dev->subdevices[1];
 	subdev_8255_init(dev, s, NULL, devpriv->digitalio);
-- 
1.7.11