[PATCH 3/3] staging: et131x: Remove USE_FBR0 define and #ifdefs
Mark Einon
mark.einon at gmail.com
Fri Oct 19 22:08:16 UTC 2012
USE_FBR0 has always been defined, even in the original driver code.
Remove the define and #ifdef code to leave the code in the same state.
Signed-off-by: Mark Einon <mark.einon at gmail.com>
---
drivers/staging/et131x/et131x.c | 58 +++++----------------------------------
1 file changed, 7 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 32f909a..c33cafd 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -176,20 +176,13 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere S
#define PARM_DMA_CACHE_DEF 0
/* RX defines */
-#define USE_FBR0 1
#define FBR_CHUNKS 32
#define MAX_DESC_PER_RING_RX 1024
/* number of RFDs - default and min */
-#ifdef USE_FBR0
#define RFD_LOW_WATER_MARK 40
#define NIC_DEFAULT_NUM_RFD 1024
#define NUM_FBRS 2
-#else
-#define RFD_LOW_WATER_MARK 20
-#define NIC_DEFAULT_NUM_RFD 256
-#define NUM_FBRS 1
-#endif
#define NIC_MIN_NUM_RFD 64
#define NUM_PACKETS_HANDLED 256
@@ -871,7 +864,7 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter)
csr |= 0x1000;
else if (adapter->rx_ring.fbr[0]->buffsize == 16384)
csr |= 0x1800;
-#ifdef USE_FBR0
+
csr |= 0x0400; /* FBR0 enable */
if (adapter->rx_ring.fbr[1]->buffsize == 256)
csr |= 0x0100;
@@ -879,7 +872,6 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter)
csr |= 0x0200;
else if (adapter->rx_ring.fbr[1]->buffsize == 1024)
csr |= 0x0300;
-#endif
writel(csr, &adapter->regs->rxdma.csr);
csr = readl(&adapter->regs->rxdma.csr);
@@ -1909,7 +1901,6 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
&rx_dma->fbr1_min_des);
-#ifdef USE_FBR0
/* Now's the best time to initialize FBR0 contents */
fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
@@ -1933,7 +1924,6 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
writel(
((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
&rx_dma->fbr0_min_des);
-#endif
/* Program the number of packets we will receive before generating an
* interrupt.
@@ -2305,9 +2295,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
rx_ring = &adapter->rx_ring;
/* Alloc memory for the lookup table */
-#ifdef USE_FBR0
rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
-#endif
rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
/* The first thing we will do is configure the sizes of the buffer
@@ -2329,35 +2317,25 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
*/
if (adapter->registry_jumbo_packet < 2048) {
-#ifdef USE_FBR0
rx_ring->fbr[1]->buffsize = 256;
rx_ring->fbr[1]->num_entries = 512;
-#endif
rx_ring->fbr[0]->buffsize = 2048;
rx_ring->fbr[0]->num_entries = 512;
} else if (adapter->registry_jumbo_packet < 4096) {
-#ifdef USE_FBR0
rx_ring->fbr[1]->buffsize = 512;
rx_ring->fbr[1]->num_entries = 1024;
-#endif
rx_ring->fbr[0]->buffsize = 4096;
rx_ring->fbr[0]->num_entries = 512;
} else {
-#ifdef USE_FBR0
rx_ring->fbr[1]->buffsize = 1024;
rx_ring->fbr[1]->num_entries = 768;
-#endif
rx_ring->fbr[0]->buffsize = 16384;
rx_ring->fbr[0]->num_entries = 128;
}
-#ifdef USE_FBR0
adapter->rx_ring.psr_num_entries =
adapter->rx_ring.fbr[1]->num_entries +
adapter->rx_ring.fbr[0]->num_entries;
-#else
- adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[0]->num_entries;
-#endif
/* Allocate an area of memory for Free Buffer Ring 1 */
bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
@@ -2381,7 +2359,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
(void *)((u8 *) rx_ring->fbr[0]->ring_virtaddr +
rx_ring->fbr[0]->offset);
-#ifdef USE_FBR0
/* Allocate an area of memory for Free Buffer Ring 0 */
bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
0xfff;
@@ -2403,7 +2380,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
rx_ring->fbr[1]->ring_virtaddr =
(void *)((u8 *) rx_ring->fbr[1]->ring_virtaddr +
rx_ring->fbr[1]->offset);
-#endif
+
for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) {
u64 fbr1_tmp_physaddr;
u64 fbr1_offset;
@@ -2468,7 +2445,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
}
}
-#ifdef USE_FBR0
/* Same for FBR0 (if in use) */
for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) {
u64 fbr0_tmp_physaddr;
@@ -2515,7 +2491,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
rx_ring->fbr[1]->virt[index] - 4;
}
}
-#endif
/* Allocate an area of memory for FIFO of Packet Status ring entries */
pktstat_ringsize =
@@ -2644,7 +2619,6 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
rx_ring->fbr[0]->ring_virtaddr = NULL;
}
-#ifdef USE_FBR0
/* Now the same for Free Buffer Ring 0 */
if (rx_ring->fbr[1]->ring_virtaddr) {
/* First the packet memory */
@@ -2679,7 +2653,6 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
rx_ring->fbr[1]->ring_virtaddr = NULL;
}
-#endif
/* Free Packet Status Ring */
if (rx_ring->ps_ring_virtaddr) {
@@ -2709,10 +2682,7 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
}
/* Free the FBR Lookup Table */
-#ifdef USE_FBR0
kfree(rx_ring->fbr[1]);
-#endif
-
kfree(rx_ring->fbr[0]);
/* Reset Counters */
@@ -2808,9 +2778,7 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
* need to clean up OOB data
*/
if (
-#ifdef USE_FBR0
(ring_index == 0 && buff_index < rx_local->fbr[1]->num_entries) ||
-#endif
(ring_index == 1 && buff_index < rx_local->fbr[0]->num_entries)) {
spin_lock_irqsave(&adapter->fbr_lock, flags);
@@ -2831,9 +2799,7 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
&rx_local->fbr[0]->local_full,
rx_local->fbr[0]->num_entries - 1),
&rx_dma->fbr1_full_offset);
- }
-#ifdef USE_FBR0
- else {
+ } else {
struct fbr_desc *next = (struct fbr_desc *)
rx_local->fbr[1]->ring_virtaddr +
INDEX10(rx_local->fbr[1]->local_full);
@@ -2851,7 +2817,6 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
rx_local->fbr[1]->num_entries - 1),
&rx_dma->fbr0_full_offset);
}
-#endif
spin_unlock_irqrestore(&adapter->fbr_lock, flags);
} else {
dev_err(&adapter->pdev->dev,
@@ -2934,20 +2899,11 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter)
writel(rx_local->local_psr_full,
&adapter->regs->rxdma.psr_full_offset);
-#ifndef USE_FBR0
- if (ring_index != 1)
- return NULL;
-#endif
-
-#ifdef USE_FBR0
if (ring_index > 1 ||
- (ring_index == 0 &&
- buff_index > rx_local->fbr[1]->num_entries - 1) ||
- (ring_index == 1 &&
- buff_index > rx_local->fbr[0]->num_entries - 1)) {
-#else
- if (ring_index != 1 || buff_index > rx_local->fbr[0]->num_entries - 1) {
-#endif
+ (ring_index == 0 &&
+ buff_index > rx_local->fbr[1]->num_entries - 1) ||
+ (ring_index == 1 &&
+ buff_index > rx_local->fbr[0]->num_entries - 1)) {
/* Illegal buffer or ring index cannot be used by S/W*/
dev_err(&adapter->pdev->dev,
"NICRxPkts PSR Entry %d indicates "
--
1.7.9.5
More information about the devel
mailing list