[PATCH v3 2/3] Staging: ipack: added support for the TEWS TPCI-200 carrier board

Samuel Iglesias Gonsalvez siglesias at igalia.com
Tue May 8 07:43:24 UTC 2012


Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias at igalia.com>
---
 drivers/staging/ipack/Kconfig           |    5 +
 drivers/staging/ipack/Makefile          |    1 +
 drivers/staging/ipack/TODO              |   10 +
 drivers/staging/ipack/bridges/Kconfig   |    7 +
 drivers/staging/ipack/bridges/Makefile  |    1 +
 drivers/staging/ipack/bridges/tpci200.c | 1176 +++++++++++++++++++++++++++++++
 drivers/staging/ipack/bridges/tpci200.h |  165 +++++
 7 files changed, 1365 insertions(+)
 create mode 100644 drivers/staging/ipack/bridges/Kconfig
 create mode 100644 drivers/staging/ipack/bridges/Makefile
 create mode 100644 drivers/staging/ipack/bridges/tpci200.c
 create mode 100644 drivers/staging/ipack/bridges/tpci200.h

diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
index c036b79..a3f5925 100644
--- a/drivers/staging/ipack/Kconfig
+++ b/drivers/staging/ipack/Kconfig
@@ -8,3 +8,8 @@ menuconfig IPACK_BUS
 	---help---
 	  If you say Y here you get support for the IndustryPack Framework.
 
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
index 56e2340..59b8762 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/staging/ipack/Makefile
@@ -2,3 +2,4 @@
 # Makefile for the IPACK bridge device drivers.
 #
 obj-$(CONFIG_IPACK_BUS)		+= ipack.o
+obj-y				+= bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
index 167ae4d..d5a5735 100644
--- a/drivers/staging/ipack/TODO
+++ b/drivers/staging/ipack/TODO
@@ -12,6 +12,16 @@ operations between the two kind of boards.
 TODO
 ====
 
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+  No autodetection supported yet, because the mezzanine driver could not be
+  loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+  and use driver_for_each_device() instead.
+
 Ipack
 -----
 
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
new file mode 100644
index 0000000..554302f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+	bool "TEWS TPCI-200 support for IndustryPack bus"
+	depends on IPACK_BUS
+	help
+	  This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+	default n
+
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile
new file mode 100644
index 0000000..d8b7645
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
new file mode 100644
index 0000000..dfa376f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -0,0 +1,1176 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia at cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias at igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "tpci200.h"
+
+struct ipack_bus_ops tpci200_bus_ops;
+
+/* TPCI200 controls registers */
+static int control_reg[] = {
+	TPCI200_CONTROL_A_REG,
+	TPCI200_CONTROL_B_REG,
+	TPCI200_CONTROL_C_REG,
+	TPCI200_CONTROL_D_REG
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(tpci200_list);
+
+static int tpci200_slot_unregister(struct ipack_device *dev);
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200;
+	int found = 0;
+
+	if (dev == NULL) {
+		pr_info("Slot doesn't exist.\n");
+		return NULL;
+	}
+
+	list_for_each_entry(tpci200, &tpci200_list, list) {
+		if (tpci200->number == dev->bus_nr) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found) {
+		pr_err("Carrier not found\n");
+		return NULL;
+	}
+
+	if (dev->slot >= TPCI200_NB_SLOT) {
+		pr_info("Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot,
+				TPCI200_NB_SLOT-1);
+		return NULL;
+	}
+
+	BUG_ON(tpci200->slots == NULL);
+	if (tpci200->slots[dev->slot].dev == NULL) {
+		pr_info("Slot [%s %d:%d] is not registered !\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot);
+		return NULL;
+	}
+
+	return tpci200;
+}
+
+static unsigned char __tpci200_read8(void *address, unsigned long offset)
+{
+	return ioread8(address + (offset^1));
+}
+
+static unsigned short __tpci200_read16(void *address, unsigned long offset)
+{
+	return ioread16(address + offset);
+}
+
+static unsigned int __tpci200_read32(void *address, unsigned long offset)
+{
+
+	return swahw32(ioread32(address + offset));
+}
+
+static void __tpci200_write8(unsigned char value, void *address, unsigned long offset)
+{
+	iowrite8(value, address+(offset^1));
+}
+
+static void __tpci200_write16(unsigned short value, void *address, unsigned long offset)
+{
+	iowrite16(value, address+offset);
+}
+
+static void __tpci200_write32(unsigned int value, void *address, unsigned long offset)
+{
+	iowrite32(swahw32(value), address+offset);
+}
+
+struct ipack_addr_space *get_slot_address_space(struct ipack_device *dev, int space)
+{
+	struct ipack_addr_space *addr;
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		addr = &dev->io_space;
+		break;
+	case IPACK_ID_SPACE:
+		addr = &dev->id_space;
+		break;
+	case IPACK_MEM_SPACE:
+		addr = &dev->mem_space;
+		break;
+	default:
+		pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot, space);
+		return NULL;
+		break;
+	}
+
+	if ((addr->size == 0) || (addr->address == NULL)) {
+		pr_err("Error, slot space not mapped !\n");
+		return NULL;
+	}
+
+	return addr;
+}
+
+/**
+ * tpci200_read8 - Read an unsigned char value on space with offset.
+ *
+ * @value	Read value
+ * @dev	Slot to read
+ * @space	Space of the slot to read
+ * @offset	Offset
+ *
+ */
+int tpci200_read8(struct ipack_device *dev, int space, unsigned long offset, unsigned char *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if (offset >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	*value = __tpci200_read8(addr->address, offset);
+
+	return 0;
+}
+
+int tpci200_read16(struct ipack_device *dev, int space, unsigned long offset, unsigned short *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+2) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+	*value = __tpci200_read16(addr->address, offset);
+
+	return 0;
+}
+
+int tpci200_read32(struct ipack_device *dev, int space, unsigned long offset, unsigned int *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+4) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	*value = __tpci200_read32(addr->address, offset);
+
+	return 0;
+}
+
+int tpci200_write8(struct ipack_device *dev, int space, unsigned long offset, unsigned char value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if (offset >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write8(value, addr->address, offset);
+
+	return 0;
+}
+
+int tpci200_write16(struct ipack_device *dev, int space, unsigned long offset, unsigned short value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+2) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write16(value, addr->address, offset);
+
+	return 0;
+}
+
+int tpci200_write32(struct ipack_device *dev, int space, unsigned long offset, unsigned int value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+4) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write32(value, addr->address, offset);
+
+	return 0;
+}
+
+void tpci200_unregister(struct tpci200_board *tpci200)
+{
+	int i;
+
+	free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+	pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+	pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
+	pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
+
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+	pci_disable_device(tpci200->info->pdev);
+	pci_dev_put(tpci200->info->pdev);
+
+	kfree(tpci200->info);
+
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		tpci200->slots[i].io_phys.address = NULL;
+		tpci200->slots[i].io_phys.size = 0;
+		tpci200->slots[i].id_phys.address = NULL;
+		tpci200->slots[i].id_phys.size = 0;
+		tpci200->slots[i].mem_phys.address = NULL;
+		tpci200->slots[i].mem_phys.size = 0;
+	}
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+	struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+	int i;
+	unsigned long flags;
+	unsigned short status_reg, reg_value;
+	unsigned short unhandled_ints = 0;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock_irqsave(&tpci200->info->access_lock, flags);
+
+	/* Read status register */
+	status_reg = readw((unsigned short *)
+			(tpci200->info->interface_regs + TPCI200_STATUS_REG));
+
+	if (status_reg & TPCI200_SLOT_INT_MASK) {
+		unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK;
+		/* callback to the IRQ handler for the corresponding slot */
+		for (i = 0; i < TPCI200_NB_SLOT; i++) {
+			if ((tpci200->slots[i].irq != NULL) &&
+					(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)))) {
+
+				ret = tpci200->slots[i].irq->handler(tpci200->slots[i].irq->arg);
+
+				/* Dummy reads */
+				readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC0));
+				readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC2));
+
+				unhandled_ints &= ~(((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)));
+			}
+		}
+	}
+	/* Interrupt not handled are disabled */
+	if (unhandled_ints) {
+		for (i = 0; i < TPCI200_NB_SLOT; i++) {
+			if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) {
+				pr_info("No registered ISR for slot [%s %d:%d]!. IRQ will be disabled.\n",
+						TPCI200_SHORTNAME,
+						tpci200->number, i);
+				reg_value = readw(
+					(unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+				reg_value &= ~(TPCI200_INT0_EN | TPCI200_INT1_EN);
+				writew(reg_value,
+				       (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&tpci200->info->access_lock, flags);
+	return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+struct ipack_device *tpci200_slot_register(const char *board_name, int size, unsigned int tpci200_number,
+		unsigned int slot_position)
+{
+	int found = 0;
+	struct ipack_device  *dev = NULL;
+	struct tpci200_board *tpci200;
+
+	list_for_each_entry(tpci200, &tpci200_list, list) {
+		if (tpci200->number == tpci200_number) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found) {
+		pr_err("carrier board not found for the device\n");
+		return NULL;
+	}
+
+	if (slot_position >= TPCI200_NB_SLOT) {
+		pr_info("Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+				TPCI200_SHORTNAME,
+				tpci200_number, slot_position,
+				TPCI200_NB_SLOT-1);
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		goto out;
+
+	if (tpci200->slots[slot_position].dev != NULL) {
+		pr_err("Slot [%s %d:%d] already installed !\n",
+				TPCI200_SHORTNAME,
+				tpci200_number, slot_position);
+		goto out_unlock;
+	}
+
+	dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+	if (dev == NULL) {
+		pr_info("Slot [%s %d:%d] Unable to allocate memory for new slot !\n",
+				TPCI200_SHORTNAME,
+				tpci200_number, slot_position);
+		goto out_unlock;
+	}
+
+	if (size > IPACK_BOARD_NAME_SIZE) {
+		pr_warning("Slot [%s %d:%d] name (%s) too long (%d > %d). Will be truncated!\n",
+				TPCI200_SHORTNAME,
+				tpci200_number, slot_position,
+				board_name, (int)strlen(board_name), IPACK_BOARD_NAME_SIZE);
+
+		size = IPACK_BOARD_NAME_SIZE;
+	}
+
+	strncpy(dev->board_name, board_name, size-1);
+	dev->board_name[size-1] = '\0';
+	dev->bus_nr = tpci200->info->drv.bus_nr;
+	dev->slot = slot_position;
+	/*
+	 * Give the same IRQ number as the slot number.
+	 * The TPCI200 has assigned his own two IRQ by PCI bus driver
+	 */
+	dev->irq = slot_position;
+
+	dev->id_space.address = NULL;
+	dev->id_space.size = 0;
+	dev->io_space.address = NULL;
+	dev->io_space.size = 0;
+	dev->mem_space.address = NULL;
+	dev->mem_space.size = 0;
+
+	/* Give the operations structure */
+	dev->ops = &tpci200_bus_ops;
+	tpci200->slots[slot_position].dev = dev;
+
+	if (ipack_device_register(dev) < 0) {
+		tpci200_slot_unregister(dev);
+		kfree(dev);
+	}
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return dev;
+}
+
+static ssize_t tpci200_store_board(struct device *pdev, const char *buf, size_t count, int slot)
+{
+	struct tpci200_board *card = dev_get_drvdata(pdev);
+	struct ipack_device *dev = card->slots[slot].dev;
+
+	if (dev != NULL)
+		return -EBUSY;
+
+	dev = tpci200_slot_register(buf, count, card->number, slot);
+	if (dev == NULL)
+		return -ENODEV;
+
+	return count;
+}
+
+static ssize_t tpci200_show_board(struct device *pdev, char *buf, int slot)
+{
+	struct tpci200_board *card = dev_get_drvdata(pdev);
+	struct ipack_device *dev = card->slots[slot].dev;
+
+	if (dev != NULL)
+		return snprintf(buf, PAGE_SIZE, "%s\n", dev->board_name);
+	else
+		return snprintf(buf, PAGE_SIZE, "none\n");
+}
+
+
+	static ssize_t
+tpci200_show_description(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "TEWS tpci200 carrier PCI for Industry-pack mezzanines.\n");
+}
+
+	static ssize_t
+tpci200_show_board_slot0(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	return tpci200_show_board(pdev, buf, 0);
+}
+
+	static ssize_t
+tpci200_store_board_slot0(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 0);
+}
+
+	static ssize_t
+tpci200_show_board_slot1(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	return tpci200_show_board(pdev, buf, 1);
+}
+
+	static ssize_t
+tpci200_store_board_slot1(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 1);
+}
+
+	static ssize_t
+tpci200_show_board_slot2(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	return tpci200_show_board(pdev, buf, 2);
+}
+
+	static ssize_t
+tpci200_store_board_slot2(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 2);
+}
+
+
+	static ssize_t
+tpci200_show_board_slot3(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	return tpci200_show_board(pdev, buf, 3);
+}
+
+	static ssize_t
+tpci200_store_board_slot3(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 3);
+}
+
+/* Declaration of the device attributes for the TPCI200 */
+static DEVICE_ATTR(description, S_IRUGO, tpci200_show_description, NULL);
+static DEVICE_ATTR(board_slot0, S_IRUGO | S_IWUSR, tpci200_show_board_slot0, tpci200_store_board_slot0);
+static DEVICE_ATTR(board_slot1, S_IRUGO | S_IWUSR, tpci200_show_board_slot1, tpci200_store_board_slot1);
+static DEVICE_ATTR(board_slot2, S_IRUGO | S_IWUSR, tpci200_show_board_slot2, tpci200_store_board_slot2);
+static DEVICE_ATTR(board_slot3, S_IRUGO | S_IWUSR, tpci200_show_board_slot3, tpci200_store_board_slot3);
+
+static struct attribute *tpci200_attrs[] = {
+	&dev_attr_description.attr,
+	&dev_attr_board_slot0.attr,
+	&dev_attr_board_slot1.attr,
+	&dev_attr_board_slot2.attr,
+	&dev_attr_board_slot3.attr,
+	NULL,
+};
+
+static struct attribute_group tpci200_attr_group = {
+	.attrs = tpci200_attrs,
+};
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+	return sysfs_create_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+	sysfs_remove_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+#else
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+	return 0;
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+}
+
+#endif /* CONFIG_SYSFS */
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+	int  i;
+	int res;
+	unsigned long ioidint_base;
+	unsigned long mem_base;
+	unsigned short slot_ctrl;
+
+	if (pci_enable_device(tpci200->info->pdev) < 0)
+		return -ENODEV;
+
+	if (tpci200_create_sysfs_files(tpci200) < 0) {
+		pr_err("failed creating sysfs files\n");
+		res = -EFAULT;
+		goto out_disable_pci;
+	}
+
+	/* Request IP interface register (Bar 2) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, "Carrier IP interface registers");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 2 !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn,
+		       tpci200->info->pdev->vendor,
+		       tpci200->info->pdev->device,
+		       tpci200->info->pdev->subsystem_vendor,
+		       tpci200->info->pdev->subsystem_device);
+		goto out_remove_sysfs;
+	}
+
+	/* Request IO ID INT space (Bar 3) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR, "Carrier IO ID INT space");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 3 !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn,
+		       tpci200->info->pdev->vendor,
+		       tpci200->info->pdev->device,
+		       tpci200->info->pdev->subsystem_vendor,
+		       tpci200->info->pdev->subsystem_device);
+		goto out_release_ip_space;
+	}
+
+	/* Request MEM space (Bar 4) */
+	res = pci_request_region(tpci200->info->pdev,
+				 TPCI200_MEM8_SPACE_BAR,
+				 "Carrier MEM space");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 4!",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn,
+		       tpci200->info->pdev->vendor,
+		       tpci200->info->pdev->device,
+		       tpci200->info->pdev->subsystem_vendor,
+		       tpci200->info->pdev->subsystem_device);
+		goto out_release_ioid_int_space;
+	}
+
+	/* Map internal tpci200 driver user space */
+	tpci200->info->interface_regs =
+		ioremap(
+			pci_resource_start(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR),
+			TPCI200_IFACE_SIZE);
+	tpci200->info->ioidint_space =
+		ioremap(
+			pci_resource_start(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR),
+			TPCI200_IOIDINT_SIZE);
+	tpci200->info->mem8_space =
+		ioremap(
+			pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR),
+			TPCI200_MEM8_SIZE);
+
+	spin_lock_init(&tpci200->info->access_lock);
+	ioidint_base = pci_resource_start(tpci200->info->pdev,
+					  TPCI200_IO_ID_INT_SPACES_BAR);
+	mem_base = pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+	/* Set the default parameters of the slot
+	 * INT0 disabled, level sensitive
+	 * INT1 disabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = 0;
+
+	/* Set all slot physical address space */
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		tpci200->slots[i].io_phys.address =
+			(void *)ioidint_base + TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
+		tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
+
+		tpci200->slots[i].id_phys.address =
+			(void *)ioidint_base + TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
+		tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
+
+		tpci200->slots[i].mem_phys.address = (void *)mem_base + TPCI200_MEM8_GAP*i;
+		tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
+
+		writew(slot_ctrl,
+		       (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+	}
+
+	res = request_irq(tpci200->info->pdev->irq,
+			  tpci200_interrupt, IRQF_SHARED,
+			  TPCI200_SHORTNAME,
+			  (void *) tpci200);
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) unable to register IRQ !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn,
+		       TPCI200_VENDOR_ID,
+		       TPCI200_DEVICE_ID,
+		       TPCI200_SUBVENDOR_ID,
+		       TPCI200_SUBDEVICE_ID);
+		tpci200_unregister(tpci200);
+		goto out_err;
+	}
+
+	return 0;
+
+out_release_ioid_int_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_remove_sysfs:
+	tpci200_remove_sysfs_files(tpci200);
+out_disable_pci:
+	pci_disable_device(tpci200->info->pdev);
+out_err:
+	return res;
+}
+
+static int __tpci200_request_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+	unsigned short slot_ctrl;
+
+	/* Set the default parameters of the slot
+	 * INT0 enabled, level sensitive
+	 * INT1 enabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN;
+	writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+
+	return 0;
+}
+
+static void __tpci200_free_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+	unsigned short slot_ctrl;
+
+	/* Set the default parameters of the slot
+	 * INT0 disabled, level sensitive
+	 * INT1 disabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = 0;
+	writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+}
+
+int tpci200_free_irq(struct ipack_device *dev)
+{
+	int res;
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	if (tpci200->slots[dev->slot].irq == NULL) {
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	__tpci200_free_irq(tpci200, dev);
+	slot_irq = tpci200->slots[dev->slot].irq;
+	tpci200->slots[dev->slot].irq = NULL;
+	kfree(slot_irq);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
+{
+	int res;
+	struct ipack_addr_space *virt_addr_space;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		if (dev->io_space.address == NULL) {
+			pr_info("Slot [%s %d:%d] IO space not mapped !\n",
+					TPCI200_SHORTNAME,
+					dev->bus_nr, dev->slot);
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->io_space;
+		break;
+	case IPACK_ID_SPACE:
+		if (dev->id_space.address == NULL) {
+			pr_info("Slot [%s %d:%d] ID space not mapped !\n",
+					TPCI200_SHORTNAME,
+					dev->bus_nr, dev->slot);
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->id_space;
+		break;
+	case IPACK_MEM_SPACE:
+		if (dev->mem_space.address == NULL) {
+			pr_info("Slot [%s %d:%d] MEM space not mapped !\n",
+					TPCI200_SHORTNAME,
+					dev->bus_nr, dev->slot);
+		goto out_unlock;
+		}
+		virt_addr_space = &dev->mem_space;
+		break;
+	default:
+		pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot, space);
+		res = -EINVAL;
+		goto out_unlock;
+		break;
+	}
+
+	iounmap(virt_addr_space->address);
+
+	virt_addr_space->address = NULL;
+	virt_addr_space->size = 0;
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+int tpci200_slot_unregister(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	tpci200_free_irq(dev);
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		return -ERESTARTSYS;
+
+	ipack_device_unregister(dev);
+	kfree(dev);
+	tpci200->slots[dev->slot].dev = NULL;
+	mutex_unlock(&tpci200->mutex);
+
+	return 0;
+}
+
+int tpci200_slot_map_space(struct ipack_device *dev, unsigned int memory_size, int space)
+{
+	int res;
+	unsigned int size_to_map;
+	void *phys_address;
+	struct ipack_addr_space *virt_addr_space;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		if (dev->io_space.address != NULL) {
+			pr_err("Slot [%s %d:%d] IO space already mapped !\n",
+					TPCI200_SHORTNAME,
+					tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->io_space;
+
+		phys_address = tpci200->slots[dev->slot].io_phys.address;
+		size_to_map = tpci200->slots[dev->slot].io_phys.size;
+		break;
+	case IPACK_ID_SPACE:
+		if (dev->id_space.address != NULL) {
+			pr_err("Slot [%s %d:%d] ID space already mapped !\n",
+					TPCI200_SHORTNAME,
+					tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->id_space;
+
+		phys_address = tpci200->slots[dev->slot].id_phys.address;
+		size_to_map = tpci200->slots[dev->slot].id_phys.size;
+		break;
+	case IPACK_MEM_SPACE:
+		if (dev->mem_space.address != NULL) {
+			pr_err("Slot [%s %d:%d] MEM space already mapped !\n",
+					TPCI200_SHORTNAME,
+					tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->mem_space;
+
+		if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
+			pr_err("Slot [%s %d:%d] request is 0x%X memory, only 0x%X available !\n",
+					TPCI200_SHORTNAME,
+					dev->bus_nr,
+					dev->slot,
+					memory_size,
+					tpci200->slots[dev->slot].mem_phys.size);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+
+		phys_address = tpci200->slots[dev->slot].mem_phys.address;
+		size_to_map = memory_size;
+		break;
+	default:
+		pr_err("Slot [%s %d:%d] space %d doesn't exist !\n",
+				TPCI200_SHORTNAME,
+				tpci200->number, dev->slot, space);
+		res = -EINVAL;
+		goto out_unlock;
+		break;
+	}
+
+	virt_addr_space->size = size_to_map;
+	virt_addr_space->address = ioremap((unsigned long)phys_address, size_to_map);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+int tpci200_request_irq(struct ipack_device *dev, int vector, int (*handler)(void *), void *arg)
+{
+	int res;
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	if (tpci200->slots[dev->slot].irq != NULL) {
+		pr_err("Slot [%s %d:%d] IRQ already registered !\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot);
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+	if (slot_irq == NULL) {
+		pr_err("Slot [%s %d:%d] unable to allocate memory for IRQ !\n",
+				TPCI200_SHORTNAME,
+				dev->bus_nr, dev->slot);
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	/*
+	 * WARNING: Setup Interrupt Vector in the IndustryPack device
+	 * before an IRQ request.
+	 * Read the User Manual of your IndustryPack device to know
+	 * where to write the vector in memory.
+	 */
+	slot_irq->vector = vector;
+	slot_irq->handler = handler;
+	slot_irq->arg = arg;
+	if (dev->board_name) {
+		if (strlen(dev->board_name) > IPACK_IRQ_NAME_SIZE) {
+			pr_warning("Slot [%s %d:%d] IRQ name too long (%d char > %d char MAX). Will be truncated!\n",
+					TPCI200_SHORTNAME,
+					dev->bus_nr, dev->slot,
+					(int)strlen(dev->board_name),
+					IPACK_IRQ_NAME_SIZE);
+		}
+		strncpy(slot_irq->name, dev->board_name, IPACK_IRQ_NAME_SIZE-1);
+	} else {
+		strcpy(slot_irq->name, "Unknown");
+	}
+
+	tpci200->slots[dev->slot].irq = slot_irq;
+	res = __tpci200_request_irq(tpci200, dev);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+	int i;
+
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		if (tpci200->slots[i].dev == NULL)
+			continue;
+		else
+			tpci200->slots[i].dev->driver->ops->remove(tpci200->slots[i].dev);
+	}
+
+	tpci200_unregister(tpci200);
+
+	if (tpci200->slots != NULL)
+		kfree(tpci200->slots);
+}
+
+struct ipack_bus_ops tpci200_bus_ops = {
+	.map_space = tpci200_slot_map_space,
+	.unmap_space = tpci200_slot_unmap_space,
+	.request_irq = tpci200_request_irq,
+	.free_irq = tpci200_free_irq,
+	.read8 = tpci200_read8,
+	.read16 = tpci200_read16,
+	.read32 = tpci200_read32,
+	.write8 = tpci200_write8,
+	.write16 = tpci200_write16,
+	.write32 = tpci200_write32,
+	.remove_device = tpci200_slot_unregister,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+	int res;
+
+	tpci200->slots = kzalloc(TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+	if (tpci200->slots == NULL) {
+		res = -ENOMEM;
+		goto out_err;
+	}
+
+	res = tpci200_register(tpci200);
+	if (res)
+		goto out_free;
+
+	mutex_init(&tpci200->mutex);
+	return 0;
+
+out_free:
+	kfree(tpci200->slots);
+	tpci200->slots = NULL;
+out_err:
+	return res;
+}
+
+static int tpci200_pciprobe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int ret;
+	struct tpci200_board *tpci200;
+
+	tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+	if (!tpci200)
+		return -ENOMEM;
+
+	tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+	if (!tpci200->info) {
+		kfree(tpci200);
+		return -ENOMEM;
+	}
+
+	/* Save struct pci_dev pointer */
+	tpci200->info->pdev = pdev;
+	tpci200->info->id_table = (struct pci_device_id *)id;
+
+	/* register the device and initialize it */
+	ret = tpci200_install(tpci200);
+	if (ret) {
+		pr_err("Error during tpci200 install !\n");
+		kfree(tpci200->info);
+		kfree(tpci200);
+		return -ENODEV;
+	}
+
+	tpci200->info->drv.dev = &pdev->dev;
+	tpci200->info->drv.slots = TPCI200_NB_SLOT;
+
+	/* Register the bus in the industry pack driver */
+	ret = ipack_bus_register(&tpci200->info->drv);
+	if (ret < 0) {
+		pr_err("error registering the carrier on ipack driver\n");
+		tpci200_uninstall(tpci200);
+		kfree(tpci200->info);
+		kfree(tpci200);
+		return -EFAULT;
+	}
+	/* save the bus number given by ipack to logging purpose */
+	tpci200->number = tpci200->info->drv.bus_nr;
+	dev_set_drvdata(&pdev->dev, tpci200);
+	/* add the registered device in an internal linked list */
+	list_add_tail(&tpci200->list, &tpci200_list);
+	return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+	tpci200_uninstall(tpci200);
+	tpci200_remove_sysfs_files(tpci200);
+	list_del(&tpci200->list);
+	ipack_bus_unregister(&tpci200->info->drv);
+	kfree(tpci200);
+}
+
+static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+{
+	struct tpci200_board *tpci200, *next;
+
+	/* Search the registered device to uninstall it */
+	list_for_each_entry_safe(tpci200, next, &tpci200_list, list) {
+		if (tpci200->info->pdev == dev) {
+			__tpci200_pci_remove(tpci200);
+			break;
+		}
+	}
+}
+
+static struct pci_device_id tpci200_idtable[2] = {
+	{ TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+	  TPCI200_SUBDEVICE_ID },
+	{ 0, },
+};
+
+static struct pci_driver tpci200_pci_drv = {
+	.name = "tpci200",
+	.id_table = tpci200_idtable,
+	.probe = tpci200_pciprobe,
+	.remove = __devexit_p(tpci200_pci_remove),
+};
+
+static int __init tpci200_drvr_init_module(void)
+{
+	return pci_register_driver(&tpci200_pci_drv);
+}
+
+static void __exit tpci200_drvr_exit_module(void)
+{
+	struct tpci200_board *tpci200, *next;
+
+	list_for_each_entry_safe(tpci200, next, &tpci200_list, list)
+		__tpci200_pci_remove(tpci200);
+
+	pci_unregister_driver(&tpci200_pci_drv);
+}
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
+module_init(tpci200_drvr_init_module);
+module_exit(tpci200_drvr_exit_module);
+
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h
new file mode 100644
index 0000000..e452da2
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.h
@@ -0,0 +1,165 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia at cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias at igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_SHORTNAME "TPCI200"
+
+#define TPCI200_NB_SLOT               0x4
+#define TPCI200_NB_BAR                0x6
+
+#define TPCI200_VENDOR_ID             0x1498
+#define TPCI200_DEVICE_ID             0x30C8
+#define TPCI200_SUBVENDOR_ID          0x1498
+#define TPCI200_SUBDEVICE_ID          0x300A
+
+#define TPCI200_IP_INTERFACE_BAR      2
+#define TPCI200_IO_ID_INT_SPACES_BAR  3
+#define TPCI200_MEM16_SPACE_BAR       4
+#define TPCI200_MEM8_SPACE_BAR        5
+
+#define TPCI200_REVISION_REG          0x00
+#define TPCI200_CONTROL_A_REG         0x02
+#define TPCI200_CONTROL_B_REG         0x04
+#define TPCI200_CONTROL_C_REG         0x06
+#define TPCI200_CONTROL_D_REG         0x08
+#define TPCI200_RESET_REG             0x0A
+#define TPCI200_STATUS_REG            0x0C
+
+#define TPCI200_IFACE_SIZE            0x100
+
+#define TPCI200_IO_SPACE_OFF          0x0000
+#define TPCI200_IO_SPACE_GAP          0x0100
+#define TPCI200_IO_SPACE_SIZE         0x0080
+#define TPCI200_ID_SPACE_OFF          0x0080
+#define TPCI200_ID_SPACE_GAP          0x0100
+#define TPCI200_ID_SPACE_SIZE         0x0040
+#define TPCI200_INT_SPACE_OFF         0x00C0
+#define TPCI200_INT_SPACE_GAP         0x0100
+#define TPCI200_INT_SPACE_SIZE        0x0040
+#define TPCI200_IOIDINT_SIZE          0x0400
+
+#define TPCI200_MEM8_GAP              0x00400000
+#define TPCI200_MEM8_SIZE             0x00400000
+#define TPCI200_MEM16_GAP             0x00800000
+#define TPCI200_MEM16_SIZE            0x00800000
+
+#define TPCI200_INT0_EN               0x0040
+#define TPCI200_INT1_EN               0x0080
+#define TPCI200_INT0_EDGE             0x0010
+#define TPCI200_INT1_EDGE             0x0020
+#define TPCI200_ERR_INT_EN            0x0008
+#define TPCI200_TIME_INT_EN           0x0004
+#define TPCI200_RECOVER_EN            0x0002
+#define TPCI200_CLK32                 0x0001
+
+#define TPCI200_A_RESET               0x0001
+#define TPCI200_B_RESET               0x0002
+#define TPCI200_C_RESET               0x0004
+#define TPCI200_D_RESET               0x0008
+
+#define TPCI200_A_TIMEOUT             0x1000
+#define TPCI200_B_TIMEOUT             0x2000
+#define TPCI200_C_TIMEOUT             0x4000
+#define TPCI200_D_TIMEOUT             0x8000
+
+#define TPCI200_A_ERROR               0x0100
+#define TPCI200_B_ERROR               0x0200
+#define TPCI200_C_ERROR               0x0400
+#define TPCI200_D_ERROR               0x0800
+
+#define TPCI200_A_INT0                0x0001
+#define TPCI200_A_INT1                0x0002
+#define TPCI200_B_INT0                0x0004
+#define TPCI200_B_INT1                0x0008
+#define TPCI200_C_INT0                0x0010
+#define TPCI200_C_INT1                0x0020
+#define TPCI200_D_INT0                0x0040
+#define TPCI200_D_INT1                0x0080
+
+#define TPCI200_SLOT_INT_MASK         0x00FF
+
+#define VME_IOID_SPACE  "IOID"
+#define VME_MEM_SPACE  "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector	Vector number
+ * @handler	Handler called when IRQ arrives
+ * @arg		Handler argument
+ * @name	IRQ name
+ *
+ */
+struct slot_irq {
+	int          vector;
+	int         (*handler)(void *);
+	void         *arg;
+	char         name[IPACK_IRQ_NAME_SIZE];
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id	Slot identification gived to external interface
+ * @irq		Slot IRQ infos
+ * @io_phys	IO physical base address register of the slot
+ * @id_phys	ID physical base address register of the slot
+ * @mem_phys	MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+	struct ipack_device	*dev;
+	struct slot_irq		*irq;
+	struct ipack_addr_space io_phys;
+	struct ipack_addr_space id_phys;
+	struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev		PCI device
+ * @interface_regs	Pointer to IP interface space (Bar 2)
+ * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space		Pointer to MEM space (Bar 4)
+ * @access_lock		Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+	struct pci_dev			*pdev;
+	struct pci_device_id		*id_table;
+	void				*interface_regs;
+	void				*ioidint_space;
+	void				*mem8_space;
+	spinlock_t			access_lock;
+	struct ipack_bus_device		drv;
+};
+struct tpci200_board {
+	struct list_head	list;
+	unsigned int		number;
+	struct mutex		mutex;
+	struct tpci200_slot	*slots;
+	struct tpci200_infos	*info;
+};
+
+#endif /* _TPCI200_H_ */
-- 
1.7.10




More information about the devel mailing list