[PATCH RESEND 6/9] x86: OLPC: switch over to using new EC driver on x86
Andres Salomon
dilinger at queued.net
Thu Jul 19 04:42:11 UTC 2012
This uses the new EC driver framework in drivers/platform/olpc. The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.
Signed-off-by: Andres Salomon <dilinger at queued.net>
---
arch/x86/include/asm/olpc.h | 5 ---
arch/x86/platform/olpc/olpc.c | 53 ++++++++++++++++++++-------------------
drivers/platform/olpc/olpc-ec.c | 5 ---
3 files changed, 27 insertions(+), 36 deletions(-)
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 5b28f3e..72f9adf6 100644
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h
@@ -100,11 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value);
extern int pci_olpc_init(void);
-/* EC related functions */
-
-extern int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf,
- size_t inlen, unsigned char *outbuf, size_t outlen);
-
/* SCI source values */
#define EC_SCI_SRC_EMPTY 0x00
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index a3fa180..4590096 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/platform_device.h>
@@ -32,8 +31,6 @@
struct olpc_platform_t olpc_platform_info;
EXPORT_SYMBOL_GPL(olpc_platform_info);
-static DEFINE_SPINLOCK(ec_lock);
-
/* debugfs interface to EC commands */
#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
#define EC_MAX_CMD_REPLY (8)
@@ -126,16 +123,13 @@ static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
* <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while
* OpenFirmware's source is available, the EC's is not.
*/
-int olpc_ec_cmd_x86(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen)
+static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
+ size_t outlen, void *arg)
{
- unsigned long flags;
int ret = -EIO;
int i;
int restarts = 0;
- spin_lock_irqsave(&ec_lock, flags);
-
/* Clear OBF */
for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
inb(0x68);
@@ -199,10 +193,8 @@ restart:
ret = 0;
err:
- spin_unlock_irqrestore(&ec_lock, flags);
return ret;
}
-EXPORT_SYMBOL_GPL(olpc_ec_cmd_x86);
void olpc_ec_wakeup_set(u16 value)
{
@@ -366,7 +358,7 @@ static void setup_debugfs(void)
&ec_debugfs_genops);
}
-static int olpc_ec_suspend(void)
+static int olpc_ec_suspend(struct platform_device *pdev)
{
return olpc_ec_mask_write(ec_wakeup_mask);
}
@@ -425,8 +417,28 @@ static int __init add_xo1_platform_devices(void)
return 0;
}
-static struct syscore_ops olpc_syscore_ops = {
+static int olpc_xo1_ec_probe(struct platform_device *pdev)
+{
+ /* get the EC revision */
+ olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
+ (unsigned char *) &olpc_platform_info.ecver, 1);
+
+ /* EC version 0x5f adds support for wide SCI mask */
+ if (olpc_platform_info.ecver >= 0x5f)
+ olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
+
+ pr_info("OLPC board revision %s%X (EC=%x)\n",
+ ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
+ olpc_platform_info.boardrev >> 4,
+ olpc_platform_info.ecver);
+
+ return 0;
+}
+
+static struct olpc_ec_driver ec_xo1_driver = {
.suspend = olpc_ec_suspend,
+ .probe = olpc_xo1_ec_probe,
+ .ec_cmd = olpc_xo1_ec_cmd,
};
static int __init olpc_init(void)
@@ -436,16 +448,14 @@ static int __init olpc_init(void)
if (!olpc_ofw_present() || !platform_detect())
return 0;
- spin_lock_init(&ec_lock);
+ /* register the XO-1 and 1.5-specific EC handler */
+ olpc_ec_driver_register(&ec_xo1_driver, NULL);
+ platform_device_register_simple("olpc-ec", -1, NULL, 0);
/* assume B1 and above models always have a DCON */
if (olpc_board_at_least(olpc_board(0xb1)))
olpc_platform_info.flags |= OLPC_F_DCON;
- /* get the EC revision */
- olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
- (unsigned char *) &olpc_platform_info.ecver, 1);
-
#ifdef CONFIG_PCI_OLPC
/* If the VSA exists let it emulate PCI, if not emulate in kernel.
* XO-1 only. */
@@ -453,14 +463,6 @@ static int __init olpc_init(void)
!cs5535_has_vsa2())
x86_init.pci.arch_init = pci_olpc_init;
#endif
- /* EC version 0x5f adds support for wide SCI mask */
- if (olpc_platform_info.ecver >= 0x5f)
- olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
-
- printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
- ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
- olpc_platform_info.boardrev >> 4,
- olpc_platform_info.ecver);
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
r = add_xo1_platform_devices();
@@ -468,7 +470,6 @@ static int __init olpc_init(void)
return r;
}
- register_syscore_ops(&olpc_syscore_ops);
setup_debugfs();
return 0;
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
index cfba41f..a3d32c2 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -113,11 +113,6 @@ int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen)
struct olpc_ec_priv *ec = ec_priv;
struct ec_cmd_desc desc;
- /* XXX: this will be removed in later patches */
- /* Are we using old-style callers? */
- if (!ec_driver || !ec_driver->ec_cmd)
- return olpc_ec_cmd_x86(cmd, inbuf, inlen, outbuf, outlen);
-
/* Ensure a driver and ec hook have been registered */
if (WARN_ON(!ec_driver || !ec_driver->ec_cmd))
return -ENODEV;
--
1.7.2.5
More information about the devel
mailing list