[PATCHv4 1/4] staging: OMAP4+: thermal: introduce bandgap temperature sensor

[Greg Kroah-Hartman]

On Thu, Jul 12, 2012 at 07:02:29PM +0300, Eduardo Valentin wrote:
> In the System Control Module, OMAP supplies a voltage reference
> and a temperature sensor feature that are gathered in the band
> gap voltage and temperature sensor (VBGAPTS) module. The band
> gap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
> 
> This patch provides a platform driver which expose this feature.
> It is moduled as a MFD child of the System Control Module core
> MFD driver.
> 
> This driver provides only APIs to access the device properties,
> like temperature, thresholds and update rate.
> 
> Signed-off-by: Eduardo Valentin <eduardo.valentin at ti.com>
> Signed-off-by: J Keerthy <j-keerthy at ti.com>
> ---
>  drivers/staging/Kconfig                       |    2 +
>  drivers/staging/Makefile                      |    1 +
>  drivers/staging/omap-thermal/Kconfig          |   11 +
>  drivers/staging/omap-thermal/Makefile         |    2 +
>  drivers/staging/omap-thermal/TODO             |   28 +
>  drivers/staging/omap-thermal/omap-bandgap.c   | 1167 +++++++++++++++++++++++++
>  drivers/staging/omap-thermal/omap-bandgap.h   |  425 +++++++++
>  drivers/staging/omap-thermal/omap_bandgap.txt |   30 +
>  8 files changed, 1666 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/staging/omap-thermal/Kconfig
>  create mode 100644 drivers/staging/omap-thermal/Makefile
>  create mode 100644 drivers/staging/omap-thermal/TODO
>  create mode 100644 drivers/staging/omap-thermal/omap-bandgap.c
>  create mode 100644 drivers/staging/omap-thermal/omap-bandgap.h
>  create mode 100644 drivers/staging/omap-thermal/omap_bandgap.txt
> 
> Patch changelog:
> Change from V1 to V2:
> - Compilation fixes on Kconfig and Makefiles under drivers/staging
> Change from V2 to V3:
> - Removed empty line from end of Kconfig file, so git is happy while applying
> - Keerthy's SOB now matches Copyright notice found in files
> Change from V3 to V4:
> - Fixed -Werror-implicit-function-declaration compilation issues.
> - Limited driver compilation to OMAP4/5
> 
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index d3934d7..e3402d5 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -134,4 +134,6 @@ source "drivers/staging/gdm72xx/Kconfig"
>  
>  source "drivers/staging/csr/Kconfig"
>  
> +source "drivers/staging/omap-thermal/Kconfig"
> +
>  endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 5b2219a..dbbdbbc 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
>  obj-$(CONFIG_USB_G_CCG)		+= ccg/
>  obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
>  obj-$(CONFIG_CSR_WIFI)		+= csr/
> +obj-y				+= omap-thermal/

Ick, no, why did you do that?  This should only be entered if the config
entry is selected, right?

Did I just miss this on your previous patches?  Sorry about that.  I'll
see if I can fix it up by hand...

greg k-h