[PATCHv2 2/4] staging: omap-thermal: common code to expose driver to thermal framework

Eduardo Valentin eduardo.valentin at ti.com
Sat Jul 7 07:57:50 UTC 2012


This patch has the common thermal framework support for OMAP
bandgap driver. It includes the zone registration and unregistration,
the cpu cooling and the trip definitions.

The trips definition is essentially one trip for passive cooling
using the generic cpu cooling device and another one for thermal
shutdown. The cpu cooling device is built based on the existing
cpu freq table. The build should be agnostic to omap version,
but relies that cpufreq is up and running by the time the driver
registers the cpu cooling, as it relies on the table walk api
from cpufreq.

Signed-off-by: Eduardo Valentin <eduardo.valentin at ti.com>
---
 drivers/staging/omap-thermal/Kconfig               |    8 +
 drivers/staging/omap-thermal/Makefile              |    1 +
 drivers/staging/omap-thermal/omap-thermal-common.c |  397 ++++++++++++++++++++
 drivers/staging/omap-thermal/omap-thermal.h        |  108 ++++++
 4 files changed, 514 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/omap-thermal/omap-thermal-common.c
 create mode 100644 drivers/staging/omap-thermal/omap-thermal.h

diff --git a/drivers/staging/omap-thermal/Kconfig b/drivers/staging/omap-thermal/Kconfig
index f3fd2ea..b3996cc 100644
--- a/drivers/staging/omap-thermal/Kconfig
+++ b/drivers/staging/omap-thermal/Kconfig
@@ -9,3 +9,11 @@ config OMAP_BANDGAP
 	  This includes alert interrupts generation and also the TSHUT
 	  support.
 
+config OMAP_THERMAL
+	bool "Texas Instruments OMAP4+ thermal framework support"
+	depends on OMAP_BANDGAP
+	depends on CPU_THERMAL
+	help
+	  If you say yes here you want to get support for generic thermal
+	  framework for the Texas Instruments OMAP4460+ on die bandgap
+	  temperature sensor.
diff --git a/drivers/staging/omap-thermal/Makefile b/drivers/staging/omap-thermal/Makefile
index c92a854..fcdf773 100644
--- a/drivers/staging/omap-thermal/Makefile
+++ b/drivers/staging/omap-thermal/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_OMAP_BANDGAP)	+= omap-thermal.o
 omap-thermal-y			:= omap-bandgap.o
+omap-thermal-$(CONFIG_OMAP_THERMAL)	+= omap-thermal-common.o
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c
new file mode 100644
index 0000000..a52caa4
--- /dev/null
+++ b/drivers/staging/omap-thermal/omap-thermal-common.c
@@ -0,0 +1,397 @@
+/*
+ * OMAP thermal driver interface
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/workqueue.h>
+#include <linux/thermal.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+
+#include "omap-thermal.h"
+#include "omap-bandgap.h"
+
+/* common data structures */
+struct omap_thermal_data {
+	struct thermal_zone_device *omap_thermal;
+	struct thermal_cooling_device *cool_dev;
+	struct omap_bandgap *bg_ptr;
+	enum thermal_device_mode mode;
+	struct work_struct thermal_wq;
+	int sensor_id;
+};
+
+static void omap_thermal_work(struct work_struct *work)
+{
+	struct omap_thermal_data *data = container_of(work,
+					struct omap_thermal_data, thermal_wq);
+
+	thermal_zone_device_update(data->omap_thermal);
+
+	dev_dbg(&data->omap_thermal->device, "updated thermal zone %s\n",
+		data->omap_thermal->type);
+}
+
+/**
+ * omap_thermal_hotspot_temperature - returns sensor extrapolated temperature
+ * @t:	omap sensor temperature
+ * @s:	omap sensor slope value
+ * @c:	omap sensor const value
+ */
+static inline int omap_thermal_hotspot_temperature(int t, int s, int c)
+{
+	int delta = t * s / 1000 + c;
+
+	if (delta < 0)
+		delta = 0;
+
+	return t + delta;
+}
+
+/* thermal zone ops */
+/* Get temperature callback function for thermal zone*/
+static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
+					 unsigned long *temp)
+{
+	struct omap_thermal_data *data = thermal->devdata;
+	struct omap_bandgap *bg_ptr = data->bg_ptr;
+	struct omap_temp_sensor *s = &bg_ptr->conf->sensors[data->sensor_id];
+	int ret, tmp, pcb_temp, slope, constant;
+
+	ret = omap_bandgap_read_temperature(bg_ptr, data->sensor_id, &tmp);
+	if (ret)
+		return ret;
+
+	pcb_temp = 0;
+	ret = thermal_zone_lookup_temperature("pcb", &pcb_temp);
+	if (ret) {
+		dev_dbg(bg_ptr->dev, "%s: failed to read pcb zone\n", __func__);
+		pcb_temp = 0;
+		ret = 0;
+	}
+
+	/* In case pcb zone is available, use the extrapolation rule with it */
+	if (pcb_temp) {
+		tmp -= pcb_temp;
+		slope = s->slope_pcb;
+		constant = s->constant_pcb;
+	} else {
+		slope = s->slope;
+		constant = s->constant;
+	}
+	*temp = omap_thermal_hotspot_temperature(tmp, slope, constant);
+
+	return ret;
+}
+
+/* simple trending callback function for thermal zone */
+static int omap_thermal_get_trend(struct thermal_zone_device *thermal,
+				  int trip, enum thermal_trend *trend)
+{
+	unsigned long trip_temp;
+	long t;
+
+	if (!omap_thermal_is_valid_trip(trip))
+		return -EINVAL;
+
+	if (trip != 0)
+		return -EINVAL;
+
+	trip_temp = omap_thermal_get_trip_value(trip);
+
+	/*
+	 * tz->temperature has already been updated by generic thermal layer,
+	 * before this callback being invoked
+	 * TODO: update this based on hw history buffer
+	 */
+	t = (thermal->temperature - thermal->last_temperature) +
+		2 * (thermal->temperature - trip_temp);
+
+	*trend = t > 0 ? THERMAL_TREND_RAISING :
+		(t < 0 ? THERMAL_TREND_DROPPING : THERMAL_TREND_NONE);
+
+	return 0;
+}
+
+/* Bind callback functions for thermal zone */
+static int omap_thermal_bind(struct thermal_zone_device *thermal,
+			      struct thermal_cooling_device *cdev)
+{
+	struct omap_thermal_data *data = thermal->devdata;
+	int max, id;
+
+	if (IS_ERR_OR_NULL(data))
+		return -ENODEV;
+
+	/* check if this is the cooling device we registered */
+	if (data->cool_dev != cdev)
+		return 0;
+
+	id = data->sensor_id;
+	max = data->bg_ptr->conf->sensors[id].cooling_data.freq_clip_count;
+
+	/* Simple thing, two trips, one passive another critical */
+	return thermal_zone_bind_cooling_device(thermal, 0, cdev, 0, max - 1);
+}
+
+/* Unbind callback functions for thermal zone */
+static int omap_thermal_unbind(struct thermal_zone_device *thermal,
+				struct thermal_cooling_device *cdev)
+{
+	struct omap_thermal_data *data = thermal->devdata;
+
+	if (IS_ERR_OR_NULL(data))
+		return -ENODEV;
+
+	/* check if this is the cooling device we registered */
+	if (data->cool_dev != cdev)
+		return 0;
+
+	/* Simple thing, two trips, one passive another critical */
+	return thermal_zone_unbind_cooling_device(thermal, 0, cdev);
+}
+
+/* Get mode callback functions for thermal zone */
+static int omap_thermal_get_mode(struct thermal_zone_device *thermal,
+				  enum thermal_device_mode *mode)
+{
+	struct omap_thermal_data *data = thermal->devdata;
+
+	if (data)
+		*mode = data->mode;
+
+	return 0;
+}
+
+/* Set mode callback functions for thermal zone */
+static int omap_thermal_set_mode(struct thermal_zone_device *thermal,
+				  enum thermal_device_mode mode)
+{
+	struct omap_thermal_data *data = thermal->devdata;
+
+	if (!data->omap_thermal) {
+		dev_notice(&thermal->device, "thermal zone not registered\n");
+		return 0;
+	}
+
+	mutex_lock(&data->omap_thermal->lock);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+	else
+		data->omap_thermal->polling_delay = 0;
+
+	mutex_unlock(&data->omap_thermal->lock);
+
+	data->mode = mode;
+	thermal_zone_device_update(data->omap_thermal);
+	dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
+		data->omap_thermal->polling_delay);
+
+	return 0;
+}
+
+/* Get trip type callback functions for thermal zone */
+static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal,
+				       int trip, enum thermal_trip_type *type)
+{
+	if (!omap_thermal_is_valid_trip(trip))
+		return -EINVAL;
+
+	if (trip + 1 == OMAP_TRIP_NUMBER)
+		*type = THERMAL_TRIP_CRITICAL;
+	else
+		*type = THERMAL_TRIP_PASSIVE;
+
+	return 0;
+}
+
+/* Get trip temperature callback functions for thermal zone */
+static int omap_thermal_get_trip_temp(struct thermal_zone_device *thermal,
+				       int trip, unsigned long *temp)
+{
+	if (!omap_thermal_is_valid_trip(trip))
+		return -EINVAL;
+
+	*temp = omap_thermal_get_trip_value(trip);
+
+	return 0;
+}
+
+/* Get critical temperature callback functions for thermal zone */
+static int omap_thermal_get_crit_temp(struct thermal_zone_device *thermal,
+				       unsigned long *temp)
+{
+	/* shutdown zone */
+	return omap_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
+}
+
+static struct thermal_zone_device_ops omap_thermal_ops = {
+	.get_temp = omap_thermal_get_temp,
+	.get_trend = omap_thermal_get_trend,
+	.bind = omap_thermal_bind,
+	.unbind = omap_thermal_unbind,
+	.get_mode = omap_thermal_get_mode,
+	.set_mode = omap_thermal_set_mode,
+	.get_trip_type = omap_thermal_get_trip_type,
+	.get_trip_temp = omap_thermal_get_trip_temp,
+	.get_crit_temp = omap_thermal_get_crit_temp,
+};
+
+int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+			       char *domain)
+{
+	struct omap_thermal_data *data;
+
+	data = devm_kzalloc(bg_ptr->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(bg_ptr->dev, "kzalloc fail\n");
+		return -ENOMEM;
+	}
+	data->sensor_id = id;
+	data->bg_ptr = bg_ptr;
+	data->mode = THERMAL_DEVICE_ENABLED;
+	INIT_WORK(&data->thermal_wq, omap_thermal_work);
+
+	/* Create thermal zone */
+	data->omap_thermal = thermal_zone_device_register(domain,
+				OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops,
+				0, FAST_TEMP_MONITORING_RATE);
+	if (IS_ERR_OR_NULL(data->omap_thermal)) {
+		dev_err(bg_ptr->dev, "thermal zone device is NULL\n");
+		return PTR_ERR(data->omap_thermal);
+	}
+	data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+	omap_bandgap_set_sensor_data(bg_ptr, id, data);
+
+	return 0;
+}
+
+int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+{
+	struct omap_thermal_data *data;
+
+	data = omap_bandgap_get_sensor_data(bg_ptr, id);
+
+	thermal_zone_device_unregister(data->omap_thermal);
+
+	return 0;
+}
+
+int omap_thermal_report_sensor_temperature(struct omap_bandgap *bg_ptr, int id)
+{
+	struct omap_thermal_data *data;
+
+	data = omap_bandgap_get_sensor_data(bg_ptr, id);
+
+	schedule_work(&data->thermal_wq);
+
+	return 0;
+}
+
+static int omap_thermal_build_cpufreq_clip(struct omap_bandgap *bg_ptr,
+					   struct freq_clip_table **tab_ptr,
+					   int *tab_size)
+{
+	struct cpufreq_frequency_table *freq_table;
+	struct freq_clip_table *tab;
+	int i, count = 0;
+
+	freq_table = cpufreq_frequency_get_table(0);
+	if (IS_ERR_OR_NULL(freq_table)) {
+		dev_err(bg_ptr->dev,
+			"%s: failed to get cpufreq table (%p)\n",
+			__func__, freq_table);
+		return -EINVAL;
+	}
+
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		unsigned int freq = freq_table[i].frequency;
+		if (freq == CPUFREQ_ENTRY_INVALID)
+			continue;
+		count++;
+	}
+
+	tab = devm_kzalloc(bg_ptr->dev, sizeof(*tab) * count, GFP_KERNEL);
+	if (!tab) {
+		dev_err(bg_ptr->dev,
+			"%s: no memory available\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		unsigned int freq = freq_table[i].frequency;
+
+		if (freq == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		tab[count - i - 1].freq_clip_max = freq;
+		tab[count - i - 1].temp_level = OMAP_TRIP_HOT;
+		tab[count - i - 1].mask_val = cpumask_of(0);
+	}
+
+	*tab_ptr = tab;
+	*tab_size = count;
+
+	return 0;
+}
+
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+{
+	struct omap_thermal_data *data;
+	struct freq_clip_table *tab_ptr;
+	int tab_size, ret;
+
+	data = omap_bandgap_get_sensor_data(bg_ptr, id);
+
+	ret = omap_thermal_build_cpufreq_clip(bg_ptr, &tab_ptr, &tab_size);
+	if (ret < 0) {
+		dev_err(bg_ptr->dev,
+			"%s: failed to build cpufreq clip table\n", __func__);
+		return ret;
+	}
+
+	/* Register cooling device */
+	data->cool_dev = cpufreq_cooling_register(tab_ptr, tab_size);
+	if (IS_ERR_OR_NULL(data->cool_dev)) {
+		dev_err(bg_ptr->dev,
+			"Failed to register cpufreq cooling device\n");
+		return PTR_ERR(data->cool_dev);
+	}
+	bg_ptr->conf->sensors[id].cooling_data.freq_clip_count = tab_size;
+
+	return 0;
+}
+
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+{
+	struct omap_thermal_data *data;
+
+	data = omap_bandgap_get_sensor_data(bg_ptr, id);
+	cpufreq_cooling_unregister(data->cool_dev);
+
+	return 0;
+}
diff --git a/drivers/staging/omap-thermal/omap-thermal.h b/drivers/staging/omap-thermal/omap-thermal.h
new file mode 100644
index 0000000..0dd2184
--- /dev/null
+++ b/drivers/staging/omap-thermal/omap-thermal.h
@@ -0,0 +1,108 @@
+/*
+ * OMAP thermal definitions
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __OMAP_THERMAL_H
+#define __OMAP_THERMAL_H
+
+#include "omap-bandgap.h"
+
+/* sensors gradient and offsets */
+#define OMAP_GRADIENT_SLOPE_4460				348
+#define OMAP_GRADIENT_CONST_4460				-9301
+#define OMAP_GRADIENT_SLOPE_4470				308
+#define OMAP_GRADIENT_CONST_4470				-7896
+
+#define OMAP_GRADIENT_SLOPE_5430_CPU				196
+#define OMAP_GRADIENT_CONST_5430_CPU				-6822
+#define OMAP_GRADIENT_SLOPE_5430_GPU				64
+#define OMAP_GRADIENT_CONST_5430_GPU				978
+
+/* PCB sensor calculation constants */
+#define OMAP_GRADIENT_SLOPE_W_PCB_4460				1142
+#define OMAP_GRADIENT_CONST_W_PCB_4460				-393
+#define OMAP_GRADIENT_SLOPE_W_PCB_4470				1063
+#define OMAP_GRADIENT_CONST_W_PCB_4470				-477
+
+#define OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU			469
+#define OMAP_GRADIENT_CONST_W_PCB_5430_CPU			-1272
+#define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU			378
+#define OMAP_GRADIENT_CONST_W_PCB_5430_GPU			154
+
+/* trip points of interest in milicelsius (at hotspot level) */
+#define OMAP_TRIP_COLD						100000
+#define OMAP_TRIP_HOT						110000
+#define OMAP_TRIP_SHUTDOWN					125000
+#define OMAP_TRIP_NUMBER					2
+#define OMAP_TRIP_STEP							\
+	((OMAP_TRIP_SHUTDOWN - OMAP_TRIP_HOT) / (OMAP_TRIP_NUMBER - 1))
+
+/* Update rates */
+#define FAST_TEMP_MONITORING_RATE				250
+
+/* helper macros */
+/**
+ * omap_thermal_get_trip_value - returns trip temperature based on index
+ * @i:	trip index
+ */
+#define omap_thermal_get_trip_value(i)					\
+	(OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP))
+
+/**
+ * omap_thermal_is_valid_trip - check for trip index
+ * @i:	trip index
+ */
+#define omap_thermal_is_valid_trip(trip)				\
+	((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
+
+#ifdef CONFIG_OMAP_THERMAL
+int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+			       char *domain);
+int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id);
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
+#else
+static inline
+int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+			       char *domain)
+{
+	return 0;
+}
+
+static inline
+int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+{
+	return 0;
+}
+
+static inline
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+{
+	return 0;
+}
+
+static inline
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+{
+	return 0;
+}
+#endif
+#endif
-- 
1.7.7.1.488.ge8e1c




More information about the devel mailing list