[PATCH 4/5] Staging: bcm: Replace B_UINT32 with u32 in target_params.h

[Kevin McKinney]

This patch replace "B_UINT32" with "u32" in
target_params.h

Signed-off-by: Kevin McKinney <klmckinney1 at gmail.com>
---
 drivers/staging/bcm/target_params.h |   72 +++++++++++++++++------------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
index 86069ce..e416dac 100644
--- a/drivers/staging/bcm/target_params.h
+++ b/drivers/staging/bcm/target_params.h
@@ -2,56 +2,56 @@
 #define TARGET_PARAMS_H
 
 typedef struct _TARGET_PARAMS {
-	B_UINT32 m_u32CfgVersion;
-	B_UINT32 m_u32CenterFrequency;
-	B_UINT32 m_u32BandAScan;
-	B_UINT32 m_u32BandBScan;
-	B_UINT32 m_u32BandCScan;
-	B_UINT32 m_u32ErtpsOptions;
-	B_UINT32 m_u32PHSEnable;
-	B_UINT32 m_u32HoEnable;
-	B_UINT32 m_u32HoReserved1;
-	B_UINT32 m_u32HoReserved2;
-	B_UINT32 m_u32MimoEnable;
-	B_UINT32 m_u32SecurityEnable;
-	B_UINT32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
+	u32 m_u32CfgVersion;
+	u32 m_u32CenterFrequency;
+	u32 m_u32BandAScan;
+	u32 m_u32BandBScan;
+	u32 m_u32BandCScan;
+	u32 m_u32ErtpsOptions;
+	u32 m_u32PHSEnable;
+	u32 m_u32HoEnable;
+	u32 m_u32HoReserved1;
+	u32 m_u32HoReserved2;
+	u32 m_u32MimoEnable;
+	u32 m_u32SecurityEnable;
+	u32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
 	/* PowerSaving Mode Options:
 	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
 	 * bit 1 = 1: CINR reporting in Idlemode Msg
 	 * bit 2 = 1: Default PSC Enable in sleepmode
 	 */
-	B_UINT32 m_u32PowerSavingModeOptions;
-	B_UINT32 m_u32ArqEnable;
+	u32 m_u32PowerSavingModeOptions;
+	u32 m_u32ArqEnable;
 	/* From Version #3, the HARQ section renamed as general */
-	B_UINT32 m_u32HarqEnable;
-	B_UINT32  m_u32EEPROMFlag;
+	u32 m_u32HarqEnable;
+	u32 m_u32EEPROMFlag;
 	/* BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
 	 * Unused - LSByte
 	 */
-	B_UINT32 m_u32Customize;
-	B_UINT32 m_u32ConfigBW;  /* In Hz */
-	B_UINT32 m_u32ShutDownInitThresholdTimer;
-	B_UINT32 m_u32RadioParameter;
-	B_UINT32 m_u32PhyParameter1;
-	B_UINT32 m_u32PhyParameter2;
-	B_UINT32 m_u32PhyParameter3;
-	B_UINT32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
-	B_UINT32 m_u32MaxMACDataperDLFrame;
-	B_UINT32 m_u32MaxMACDataperULFrame;
-	B_UINT32 m_u32Corr2MacFlags;
-	B_UINT32 HostDrvrConfig1;
-	B_UINT32 HostDrvrConfig2;
-	B_UINT32 HostDrvrConfig3;
-	B_UINT32 HostDrvrConfig4;
-	B_UINT32 HostDrvrConfig5;
-	B_UINT32 HostDrvrConfig6;
-	B_UINT32 m_u32SegmentedPUSCenable;
+	u32 m_u32Customize;
+	u32 m_u32ConfigBW;  /* In Hz */
+	u32 m_u32ShutDownInitThresholdTimer;
+	u32 m_u32RadioParameter;
+	u32 m_u32PhyParameter1;
+	u32 m_u32PhyParameter2;
+	u32 m_u32PhyParameter3;
+	u32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
+	u32 m_u32MaxMACDataperDLFrame;
+	u32 m_u32MaxMACDataperULFrame;
+	u32 m_u32Corr2MacFlags;
+	u32 HostDrvrConfig1;
+	u32 HostDrvrConfig2;
+	u32 HostDrvrConfig3;
+	u32 HostDrvrConfig4;
+	u32 HostDrvrConfig5;
+	u32 HostDrvrConfig6;
+	u32 m_u32SegmentedPUSCenable;
 	/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
 	 * BAMC Related Parameters
 	 * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
 	 * bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
 	 */
-	B_UINT32 m_u32BandAMCEnable;
+	u32 m_u32BandAMCEnable;
 } stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
 
 #endif
-- 
1.7.9.5