[PATCH 1/1] Staging: hv: Move the mouse driver out of staging

Dmitry Torokhov dmitry.torokhov at gmail.com
Sat Nov 5 06:47:39 UTC 2011


Hi KY,

On Fri, Oct 28, 2011 at 03:35:16PM -0700, K. Y. Srinivasan wrote:
> The hv_mouse.c implements a hid compliant mouse driver for use on a
> Hyper-V based system. This driver is currently in the staging area and
> as part of the effort to move this driver out of staging, I had posted
> the driver code for community review a few weeks ago. This current patch
> addresses all the review comments I have gotten to date. All the relevant
> patches have already been submitted to the staging tree as well.
> 
> As per Greg's suggestion, this patch does not get rid of the code from
> the staging area. Once the mouse driver lands under the hid directory,
> we will cleanup the staging directory.
> 
> Signed-off-by: K. Y. Srinivasan <kys at microsoft.com>
> ---
>  drivers/hid/Kconfig      |    6 +
>  drivers/hid/Makefile     |    1 +
>  drivers/hid/hid-hyperv.c |  600 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 607 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/hid/hid-hyperv.c
> 
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 1130a89..068dd97 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -613,6 +613,12 @@ config HID_ZYDACRON
>  	---help---
>  	Support for Zydacron remote control.
>  
> +config HYPERV_MOUSE
> +	tristate "Microsoft Hyper-V mouse driver"
> +	depends on HYPERV
> +	---help---
> +	  Select this option to enable the Hyper-V mouse driver.
> +
>  endmenu
>  
>  endif # HID_SUPPORT
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index 0a0a38e..e683b8c 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_HID_ZYDACRON)	+= hid-zydacron.o
>  obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o
>  obj-$(CONFIG_HID_WALTOP)	+= hid-waltop.o
>  obj-$(CONFIG_HID_WIIMOTE)	+= hid-wiimote.o
> +obj-$(CONFIG_HYPERV_MOUSE)	+= hid-hyperv.o
>  
>  obj-$(CONFIG_USB_HID)		+= usbhid/
>  obj-$(CONFIG_USB_MOUSE)		+= usbhid/
> diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
> new file mode 100644
> index 0000000..2c2e1b4
> --- /dev/null
> +++ b/drivers/hid/hid-hyperv.c
> @@ -0,0 +1,600 @@
> +/*
> + *  Copyright (c) 2009, Citrix Systems, Inc.
> + *  Copyright (c) 2010, Microsoft Corporation.
> + *  Copyright (c) 2011, Novell Inc.
> + *
> + *  This program is free software; you can redistribute it and/or modify it
> + *  under the terms and conditions of the GNU General Public License,
> + *  version 2, as published by the Free Software Foundation.
> + *
> + *  This program is distributed in the hope it will be useful, but WITHOUT
> + *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + *  more details.
> + */
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/completion.h>
> +#include <linux/input.h>
> +#include <linux/hid.h>
> +#include <linux/hiddev.h>
> +#include <linux/hyperv.h>
> +
> +
> +struct hv_input_dev_info {
> +	unsigned int size;
> +	unsigned short vendor;
> +	unsigned short product;
> +	unsigned short version;
> +	unsigned short reserved[11];
> +};
> +
> +/* The maximum size of a synthetic input message. */
> +#define SYNTHHID_MAX_INPUT_REPORT_SIZE 16
> +
> +/*
> + * Current version
> + *
> + * History:
> + * Beta, RC < 2008/1/22        1,0
> + * RC > 2008/1/22              2,0
> + */
> +#define SYNTHHID_INPUT_VERSION_MAJOR	2
> +#define SYNTHHID_INPUT_VERSION_MINOR	0
> +#define SYNTHHID_INPUT_VERSION		(SYNTHHID_INPUT_VERSION_MINOR | \
> +					 (SYNTHHID_INPUT_VERSION_MAJOR << 16))
> +
> +
> +#pragma pack(push, 1)
> +/*
> + * Message types in the synthetic input protocol
> + */
> +enum synthhid_msg_type {
> +	SYNTH_HID_PROTOCOL_REQUEST,
> +	SYNTH_HID_PROTOCOL_RESPONSE,
> +	SYNTH_HID_INITIAL_DEVICE_INFO,
> +	SYNTH_HID_INITIAL_DEVICE_INFO_ACK,
> +	SYNTH_HID_INPUT_REPORT,
> +	SYNTH_HID_MAX
> +};
> +
> +/*
> + * Basic message structures.
> + */
> +struct synthhid_msg_hdr {
> +	enum synthhid_msg_type type;
> +	u32 size;
> +};
> +
> +struct synthhid_msg {
> +	struct synthhid_msg_hdr header;
> +	char data[1]; /* Enclosed message */
> +};
> +
> +union synthhid_version {
> +	struct {
> +		u16 minor_version;
> +		u16 major_version;
> +	};
> +	u32 version;
> +};
> +
> +/*
> + * Protocol messages
> + */
> +struct synthhid_protocol_request {
> +	struct synthhid_msg_hdr header;
> +	union synthhid_version version_requested;
> +};
> +
> +struct synthhid_protocol_response {
> +	struct synthhid_msg_hdr header;
> +	union synthhid_version version_requested;
> +	unsigned char approved;
> +};
> +
> +struct synthhid_device_info {
> +	struct synthhid_msg_hdr header;
> +	struct hv_input_dev_info hid_dev_info;
> +	struct hid_descriptor hid_descriptor;
> +};
> +
> +struct synthhid_device_info_ack {
> +	struct synthhid_msg_hdr header;
> +	unsigned char reserved;
> +};
> +
> +struct synthhid_input_report {
> +	struct synthhid_msg_hdr header;
> +	char buffer[1];
> +};
> +
> +#pragma pack(pop)
> +
> +#define INPUTVSC_SEND_RING_BUFFER_SIZE		(10*PAGE_SIZE)
> +#define INPUTVSC_RECV_RING_BUFFER_SIZE		(10*PAGE_SIZE)
> +
> +
> +enum pipe_prot_msg_type {
> +	PIPE_MESSAGE_INVALID,
> +	PIPE_MESSAGE_DATA,
> +	PIPE_MESSAGE_MAXIMUM
> +};
> +
> +
> +struct pipe_prt_msg {
> +	enum pipe_prot_msg_type type;
> +	u32 size;
> +	char data[1];
> +};
> +
> +struct  mousevsc_prt_msg {
> +	enum pipe_prot_msg_type type;
> +	u32 size;
> +	union {
> +		struct synthhid_protocol_request request;
> +		struct synthhid_protocol_response response;
> +		struct synthhid_device_info_ack ack;
> +	};
> +};
> +
> +/*
> + * Represents an mousevsc device
> + */
> +struct mousevsc_dev {
> +	struct hv_device	*device;
> +	bool			init_complete;
> +	bool			connected;
> +	struct mousevsc_prt_msg	protocol_req;
> +	struct mousevsc_prt_msg	protocol_resp;
> +	/* Synchronize the request/response if needed */
> +	struct completion	wait_event;
> +	int			dev_info_status;
> +
> +	struct hid_descriptor	*hid_desc;
> +	unsigned char		*report_desc;
> +	u32			report_desc_size;
> +	struct hv_input_dev_info hid_dev_info;
> +	struct hid_device       *hid_device;
> +};
> +
> +
> +static struct mousevsc_dev *alloc_input_device(struct hv_device *device)

Can we call it mousevsc_alloc_device?

> +{
> +	struct mousevsc_dev *input_dev;
> +
> +	input_dev = kzalloc(sizeof(struct mousevsc_dev), GFP_KERNEL);
> +
> +	if (!input_dev)
> +		return NULL;
> +
> +	input_dev->device = device;
> +	hv_set_drvdata(device, input_dev);
> +	init_completion(&input_dev->wait_event);
> +
> +	return input_dev;
> +}
> +
> +static void free_input_device(struct mousevsc_dev *device)

Can we call it mousevsc_free_device?

> +{
> +	kfree(device->hid_desc);
> +	kfree(device->report_desc);
> +	hv_set_drvdata(device->device, NULL);
> +	kfree(device);
> +}
> +
> +
> +static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device,
> +				struct synthhid_device_info *device_info)
> +{
> +	int ret = 0;
> +	struct hid_descriptor *desc;
> +	struct mousevsc_prt_msg ack;

This could probably be:

	static const mousevsc_prt_msg ack = {
		.type = PIPE_MESSAGE_DATA,
		.size = sizeof(struct synthhid_device_info_ack),
		.ack = {
			.header = {
				.type = SYNTH_HID_INITIAL_DEVICE_INFO_ACK,
				.size = 1,
			},
			.reserved = 0,
		},
	};


> +
> +	/* Assume success for now */
> +	input_device->dev_info_status = 0;
> +
> +	memcpy(&input_device->hid_dev_info, &device_info->hid_dev_info,
> +		sizeof(struct hv_input_dev_info));
> +

or simply:

	input_device->hid_dev_info = device_info->hid_dev_info;

> +	desc = &device_info->hid_descriptor;
> +	WARN_ON(desc->bLength == 0);

Should also goto cleanup as such descriptor is not usable.

> +
> +	input_device->hid_desc = kzalloc(desc->bLength, GFP_ATOMIC);
> +
> +	if (!input_device->hid_desc)

if you do

		input_device->dev_info_status = -ENOMEM;

you could use it later instead of defaulting to -ENOMEM.

> +		goto cleanup;
> +
> +	memcpy(input_device->hid_desc, desc, desc->bLength);
> +
> +	input_device->report_desc_size = desc->desc[0].wDescriptorLength;
> +	if (input_device->report_desc_size == 0)

		input_device->dev_info_status = -EINVAL;

> +		goto cleanup;
> +	input_device->report_desc = kzalloc(input_device->report_desc_size,
> +					  GFP_ATOMIC);
> +
> +	if (!input_device->report_desc)

		input_device->dev_info_status = -ENOMEM;

> +		goto cleanup;
> +
> +	memcpy(input_device->report_desc,
> +	       ((unsigned char *)desc) + desc->bLength,
> +	       desc->desc[0].wDescriptorLength);
> +
> +	/* Send the ack */
> +	memset(&ack, 0, sizeof(struct mousevsc_prt_msg));
> +
> +	ack.type = PIPE_MESSAGE_DATA;
> +	ack.size = sizeof(struct synthhid_device_info_ack);
> +
> +	ack.ack.header.type = SYNTH_HID_INITIAL_DEVICE_INFO_ACK;
> +	ack.ack.header.size = 1;
> +	ack.ack.reserved = 0;
> +
> +	ret = vmbus_sendpacket(input_device->device->channel,
> +			&ack,
> +			sizeof(struct pipe_prt_msg) - sizeof(unsigned char) +
> +			sizeof(struct synthhid_device_info_ack),
> +			(unsigned long)&ack,
> +			VM_PKT_DATA_INBAND,
> +			VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
> +	if (ret != 0)

		input_device->dev_info_status = ret;

> +		goto cleanup;
> +
> +	complete(&input_device->wait_event);
> +
> +	return;
> +
> +cleanup:
> +	kfree(input_device->hid_desc);
> +	input_device->hid_desc = NULL;
> +
> +	kfree(input_device->report_desc);
> +	input_device->report_desc = NULL;

Do you have to clean it up here? You still need to clean it up in main
unwind path so consolidate both error and success path and just signal
completion and let main code figure it all out.

> +
> +	input_device->dev_info_status = -1;
> +	complete(&input_device->wait_event);
> +}
> +
> +static void mousevsc_on_receive(struct hv_device *device,
> +				struct vmpacket_descriptor *packet)
> +{
> +	struct pipe_prt_msg *pipe_msg;
> +	struct synthhid_msg *hid_msg;
> +	struct mousevsc_dev *input_dev = hv_get_drvdata(device);
> +	struct synthhid_input_report *input_report;
> +
> +	pipe_msg = (struct pipe_prt_msg *)((unsigned long)packet +
> +						(packet->offset8 << 3));
> +
> +	if (pipe_msg->type != PIPE_MESSAGE_DATA)
> +		return;
> +
> +	hid_msg = (struct synthhid_msg *)&pipe_msg->data[0];
> +
> +	switch (hid_msg->header.type) {
> +	case SYNTH_HID_PROTOCOL_RESPONSE:
> +		/*
> +		 * While it will be impossible for us to protect against
> +		 * malicious/buggy hypervisor/host, add a check here to
> +		 * ensure we don't corrupt memory.
> +		 */
> +		if ((pipe_msg->size + sizeof(struct pipe_prt_msg)
> +			- sizeof(unsigned char))
> +			> sizeof(struct mousevsc_prt_msg)) {
> +			WARN_ON(1);
> +			break;
> +		}
> +
> +		memcpy(&input_dev->protocol_resp, pipe_msg,
> +		       pipe_msg->size + sizeof(struct pipe_prt_msg) -
> +		       sizeof(unsigned char));
> +		complete(&input_dev->wait_event);
> +		break;
> +
> +	case SYNTH_HID_INITIAL_DEVICE_INFO:
> +		WARN_ON(pipe_msg->size < sizeof(struct hv_input_dev_info));
> +
> +		/*
> +		 * Parse out the device info into device attr,
> +		 * hid desc and report desc
> +		 */
> +		mousevsc_on_receive_device_info(input_dev,
> +			(struct synthhid_device_info *)&pipe_msg->data[0]);

&pipe_msg->data[0] is the same as pipe_msg->data, but the latter is
shorter and cleaner.

> +		break;
> +	case SYNTH_HID_INPUT_REPORT:
> +		input_report =
> +			(struct synthhid_input_report *)&pipe_msg->data[0];
> +		if (!input_dev->init_complete)
> +			break;
> +		hid_input_report(input_dev->hid_device,
> +				HID_INPUT_REPORT, input_report->buffer,
> +				input_report->header.size, 1);
> +		break;
> +	default:
> +		pr_err("unsupported hid msg type - type %d len %d",
> +		       hid_msg->header.type, hid_msg->header.size);
> +		break;
> +	}
> +
> +}
> +
> +static void mousevsc_on_channel_callback(void *context)
> +{
> +	const int packet_size = 0x100;
> +	int ret;
> +	struct hv_device *device = context;
> +	u32 bytes_recvd;
> +	u64 req_id;
> +	struct vmpacket_descriptor *desc;
> +	unsigned char	*buffer;
> +	int	bufferlen = packet_size;
> +
> +	buffer = kmalloc(bufferlen, GFP_ATOMIC);
> +	if (!buffer)
> +		return;
> +
> +	do {
> +		ret = vmbus_recvpacket_raw(device->channel, buffer,
> +					bufferlen, &bytes_recvd, &req_id);
> +
> +		switch (ret) {
> +		case 0:
> +			if (bytes_recvd <= 0) {
> +				kfree(buffer);
> +				return;
> +			}
> +			desc = (struct vmpacket_descriptor *)buffer;
> +
> +			switch (desc->type) {
> +			case VM_PKT_COMP:
> +				break;
> +
> +			case VM_PKT_DATA_INBAND:
> +				mousevsc_on_receive(device, desc);
> +				break;
> +
> +			default:
> +				pr_err("unhandled packet type %d, tid %llx len %d\n",
> +				   desc->type,
> +				   req_id,
> +				   bytes_recvd);
> +				break;
> +			}
> +
> +			break;
> +
> +		case -ENOBUFS:
> +			kfree(buffer);
> +			/* Handle large packet */
> +			bufferlen = bytes_recvd;
> +			buffer = kmalloc(bytes_recvd, GFP_ATOMIC);

Instead of potentially ever-increasing buffer that you also allocate
(and it looks like leaking on every callback invocation) can you just
repeat the read if you know that there are more data and use single
pre-allocated buffer?

> +
> +			if (!buffer)
> +				return;
> +
> +			break;
> +		}
> +	} while (1);
> +
> +}
> +
> +static int mousevsc_connect_to_vsp(struct hv_device *device)
> +{
> +	int ret = 0;
> +	int t;
> +	struct mousevsc_dev *input_dev = hv_get_drvdata(device);
> +	struct mousevsc_prt_msg *request;
> +	struct mousevsc_prt_msg *response;
> +
> +	request = &input_dev->protocol_req;
> +
> +	memset(request, 0, sizeof(struct mousevsc_prt_msg));
> +
> +	request->type = PIPE_MESSAGE_DATA;
> +	request->size = sizeof(struct synthhid_protocol_request);
> +
> +	request->request.header.type = SYNTH_HID_PROTOCOL_REQUEST;
> +	request->request.header.size = sizeof(unsigned int);
> +	request->request.version_requested.version = SYNTHHID_INPUT_VERSION;
> 

This is constant data; just do the same as with ack in
on_receive_device_info. It does not need to be a part of input_dev, does
it?

> +	ret = vmbus_sendpacket(device->channel, request,
> +				sizeof(struct pipe_prt_msg) -
> +				sizeof(unsigned char) +
> +				sizeof(struct synthhid_protocol_request),
> +				(unsigned long)request,
> +				VM_PKT_DATA_INBAND,
> +				VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
> +	if (ret)
> +		goto cleanup;
> +
> +	t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);
> +	if (!t) {
> +		ret = -ETIMEDOUT;
> +		goto cleanup;
> +	}
> +
> +	response = &input_dev->protocol_resp;
> +
> +	if (!response->response.approved) {
> +		pr_err("synthhid protocol request failed (version %d)\n",
> +		       SYNTHHID_INPUT_VERSION);
> +		ret = -ENODEV;
> +		goto cleanup;
> +	}
> +
> +	t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);

5 seconds? That's a long time of HV to respond...

> +	if (!t) {
> +		ret = -ETIMEDOUT;
> +		goto cleanup;
> +	}
> +
> +	/*
> +	 * We should have gotten the device attr, hid desc and report
> +	 * desc at this point
> +	 */
> +	if (input_dev->dev_info_status)
> +		ret = -ENOMEM;

Just do

	ret = input_dev->dev_info_status;

unconditionally.

> +
> +cleanup:
> +
> +	return ret;
> +}
> +
> +static int mousevsc_hid_open(struct hid_device *hid)
> +{
> +	return 0;
> +}
> +
> +static int mousevsc_hid_start(struct hid_device *hid)
> +{
> +	return 0;
> +}
> +
> +static void mousevsc_hid_close(struct hid_device *hid)
> +{
> +}
> +
> +static void mousevsc_hid_stop(struct hid_device *hid)
> +{
> +}
> +
> +static struct hid_ll_driver mousevsc_ll_driver = {
> +	.open = mousevsc_hid_open,
> +	.close = mousevsc_hid_close,
> +	.start = mousevsc_hid_start,
> +	.stop = mousevsc_hid_stop,
> +};
> +
> +static struct hid_driver mousevsc_hid_driver;
> +
> +static int mousevsc_probe(struct hv_device *device,
> +			const struct hv_vmbus_device_id *dev_id)
> +{
> +	int ret = 0;
> +	struct mousevsc_dev *input_dev;
> +	struct hid_device *hid_dev;
> +
> +	input_dev = alloc_input_device(device);
> +
> +	if (!input_dev)
> +		return -ENOMEM;
> +
> +	input_dev->init_complete = false;

Should this also be in alloc_input_device()? 

> +
> +	ret = vmbus_open(device->channel,
> +		INPUTVSC_SEND_RING_BUFFER_SIZE,
> +		INPUTVSC_RECV_RING_BUFFER_SIZE,
> +		NULL,
> +		0,
> +		mousevsc_on_channel_callback,
> +		device
> +		);
> +

This blank line is extra IMO.

> +	if (ret != 0) {
> +		free_input_device(input_dev);
> +		return ret;

Please do not mix error unwinding with gotos and unwinding in error
handling branches.

> +	}
> +
> +	ret = mousevsc_connect_to_vsp(device);
> +

This blank line is extra IMO.

> +	if (ret != 0)
> +		goto probe_err0;
> +
> +	/* workaround SA-167 */
> +	if (input_dev->report_desc[14] == 0x25)
> +		input_dev->report_desc[14] = 0x29;
> +
> +	hid_dev = hid_allocate_device();
> +	if (IS_ERR(hid_dev)) {
> +		ret = PTR_ERR(hid_dev);
> +		goto probe_err0;
> +	}
> +
> +	hid_dev->ll_driver = &mousevsc_ll_driver;
> +	hid_dev->driver = &mousevsc_hid_driver;

You are not really hid driver; you are more of a "provider" so why do
you need to set hid_dev->driver in addition to hid_dev->ll_driver?

> +	hid_dev->bus = BUS_VIRTUAL;
> +	hid_dev->vendor = input_dev->hid_dev_info.vendor;
> +	hid_dev->product = input_dev->hid_dev_info.product;
> +	hid_dev->version = input_dev->hid_dev_info.version;
> +	input_dev->hid_device = hid_dev;
> +
> +	sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");

strlcpy?

> +
> +	ret = hid_parse_report(hid_dev, input_dev->report_desc,
> +				input_dev->report_desc_size);
> +
> +	if (ret) {
> +		hid_err(hid_dev, "parse failed\n");
> +		goto probe_err1;
> +	}
> +
> +	ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV);

Why do you need to call hid_hw_start instead of letting HID core figure
it out for you?

> +
> +	if (ret) {
> +		hid_err(hid_dev, "hw start failed\n");
> +		goto probe_err1;
> +	}
> +
> +	input_dev->connected = true;
> +	input_dev->init_complete = true;
> +
> +	return ret;
> +
> +probe_err1:
> +	hid_destroy_device(hid_dev);
> +
> +probe_err0:
> +	vmbus_close(device->channel);
> +	free_input_device(input_dev);
> +	return ret;
> +}
> +
> +
> +static int mousevsc_remove(struct hv_device *dev)
> +{
> +	struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
> +
> +	vmbus_close(dev->channel);
> +
> +	if (input_dev->connected) {

Can we even get here if input_dev->connected == false?

> +		hidinput_disconnect(input_dev->hid_device);

You did not explicitly connect hidinput; leave disconnecting to the HID
core as well.

It looks like all that is needed is:

static int mousevsc_remove(struct hv_device *dev)
{
	struct mousevsc_dev *mouse = hv_get_drvdata(dev);

	vmbus_close(dev->channel);
	hid_destroy_device(mouse->hid_device);
	mousevcs_free_device(mouse);

	return 0;
}

> +		input_dev->connected = false;
> +		hid_destroy_device(input_dev->hid_device);
> +	}
> +
> +	free_input_device(input_dev);
> +
> +	return 0;
> +}
> +
> +static const struct hv_vmbus_device_id id_table[] = {
> +	/* Mouse guid */
> +	{ VMBUS_DEVICE(0x9E, 0xB6, 0xA8, 0xCF, 0x4A, 0x5B, 0xc0, 0x4c,
> +		       0xB9, 0x8B, 0x8B, 0xA1, 0xA1, 0xF3, 0xF9, 0x5A) },
> +	{ },
> +};
> +
> +MODULE_DEVICE_TABLE(vmbus, id_table);
> +
> +static struct  hv_driver mousevsc_drv = {
> +	.name = KBUILD_MODNAME,
> +	.id_table = id_table,
> +	.probe = mousevsc_probe,
> +	.remove = mousevsc_remove,
> +};
> +
> +static int __init mousevsc_init(void)
> +{
> +	return vmbus_driver_register(&mousevsc_drv);
> +}
> +
> +static void __exit mousevsc_exit(void)
> +{
> +	vmbus_driver_unregister(&mousevsc_drv);
> +}
> +
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION(HV_DRV_VERSION);
> +module_init(mousevsc_init);
> +module_exit(mousevsc_exit);
> -- 
> 1.7.4.1
> 

Thanks.

-- 
Dmitry



More information about the devel mailing list