[PATCH 4/4] staging: brcm80211: delete unused sbpcmcia.h file
Arend van Spriel
arend at broadcom.com
Mon May 9 14:32:56 UTC 2011
From: Henry Ptasinski <henryp at broadcom.com>
This include file is no longer needed.
Cc: devel at linuxdriverproject.org
Cc: linux-wireless at vger.kernel.org
Reviewed-by: Roland Vossen <rvossen at broadcoom.com>
Reviewed-by: Brett Rudley <brudley at broadcom.com>
Signed-off-by: Arend van Spriel <arend at broadcom.com>
---
drivers/staging/brcm80211/util/sbpcmcia.h | 217 -----------------------------
1 files changed, 0 insertions(+), 217 deletions(-)
delete mode 100644 drivers/staging/brcm80211/util/sbpcmcia.h
diff --git a/drivers/staging/brcm80211/util/sbpcmcia.h b/drivers/staging/brcm80211/util/sbpcmcia.h
deleted file mode 100644
index d4c1565..0000000
--- a/drivers/staging/brcm80211/util/sbpcmcia.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _SBPCMCIA_H
-#define _SBPCMCIA_H
-
-/* All the addresses that are offsets in attribute space are divided
- * by two to account for the fact that odd bytes are invalid in
- * attribute space and our read/write routines make the space appear
- * as if they didn't exist. Still we want to show the original numbers
- * as documented in the hnd_pcmcia core manual.
- */
-
-/* PCMCIA Function Configuration Registers */
-#define PCMCIA_FCR (0x700 / 2)
-
-#define FCR0_OFF 0
-#define FCR1_OFF (0x40 / 2)
-#define FCR2_OFF (0x80 / 2)
-#define FCR3_OFF (0xc0 / 2)
-
-#define PCMCIA_FCR0 (0x700 / 2)
-#define PCMCIA_FCR1 (0x740 / 2)
-#define PCMCIA_FCR2 (0x780 / 2)
-#define PCMCIA_FCR3 (0x7c0 / 2)
-
-/* Standard PCMCIA FCR registers */
-
-#define PCMCIA_COR 0
-
-#define COR_RST 0x80
-#define COR_LEV 0x40
-#define COR_IRQEN 0x04
-#define COR_BLREN 0x01
-#define COR_FUNEN 0x01
-
-#define PCICIA_FCSR (2 / 2)
-#define PCICIA_PRR (4 / 2)
-#define PCICIA_SCR (6 / 2)
-#define PCICIA_ESR (8 / 2)
-
-#define PCM_MEMOFF 0x0000
-#define F0_MEMOFF 0x1000
-#define F1_MEMOFF 0x2000
-#define F2_MEMOFF 0x3000
-#define F3_MEMOFF 0x4000
-
-/* Memory base in the function fcr's */
-#define MEM_ADDR0 (0x728 / 2)
-#define MEM_ADDR1 (0x72a / 2)
-#define MEM_ADDR2 (0x72c / 2)
-
-/* PCMCIA base plus Srom access in fcr0: */
-#define PCMCIA_ADDR0 (0x072e / 2)
-#define PCMCIA_ADDR1 (0x0730 / 2)
-#define PCMCIA_ADDR2 (0x0732 / 2)
-
-#define MEM_SEG (0x0734 / 2)
-#define SROM_CS (0x0736 / 2)
-#define SROM_DATAL (0x0738 / 2)
-#define SROM_DATAH (0x073a / 2)
-#define SROM_ADDRL (0x073c / 2)
-#define SROM_ADDRH (0x073e / 2)
-#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */
-#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */
-
-/* Values for srom_cs: */
-#define SROM_IDLE 0
-#define SROM_WRITE 1
-#define SROM_READ 2
-#define SROM_WEN 4
-#define SROM_WDS 7
-#define SROM_DONE 8
-
-/* Fields in srom_info: */
-#define SRI_SZ_MASK 0x03
-#define SRI_BLANK 0x04
-#define SRI_OTP 0x80
-
-#if !defined(ESTA_POSTMOGRIFY_REMOVAL)
-/* CIS stuff */
-
-/* The CIS stops where the FCRs start */
-#define CIS_SIZE PCMCIA_FCR
-
-/* CIS tuple length field max */
-#define CIS_TUPLE_LEN_MAX 0xff
-
-/* Standard tuples we know about */
-
-#define CISTPL_NULL 0x00
-#define CISTPL_VERS_1 0x15 /* CIS ver, manf, dev & ver strings */
-#define CISTPL_MANFID 0x20 /* Manufacturer and device id */
-#define CISTPL_FUNCID 0x21 /* Function identification */
-#define CISTPL_FUNCE 0x22 /* Function extensions */
-#define CISTPL_CFTABLE 0x1b /* Config table entry */
-#define CISTPL_END 0xff /* End of the CIS tuple chain */
-
-/* Function identifier provides context for the function extensions tuple */
-#define CISTPL_FID_SDIO 0x0c /* Extensions defined by SDIO spec */
-
-/* Function extensions for LANs (assumed for extensions other than SDIO) */
-#define LAN_TECH 1 /* Technology type */
-#define LAN_SPEED 2 /* Raw bit rate */
-#define LAN_MEDIA 3 /* Transmission media */
-#define LAN_NID 4 /* Node identification (aka MAC addr) */
-#define LAN_CONN 5 /* Connector standard */
-
-/* CFTable */
-#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */
-#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */
-#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */
-
-/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
- * take one for HNBU, and use "extensions" (a la FUNCE) within it.
- */
-
-#define CISTPL_BRCM_HNBU 0x80
-
-/* Subtypes of BRCM_HNBU: */
-
-#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */
-#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */
-#define HNBU_BOARDREV 0x02 /* One byte board revision */
-#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1)
- * or 9 (sromrev > 1) bytes
- */
-#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */
-#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */
-#define HNBU_AA 0x06 /* Antennas available */
-#define HNBU_AG 0x07 /* Antenna gain */
-#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */
-#define HNBU_LEDS 0x09 /* LED set */
-#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl)
- * in rev 2
- */
-#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */
-#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */
-#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */
-#define HNBU_PAPARMS5G 0x0e /* 5G PA params */
-#define HNBU_ANT5G 0x0f /* 4328 5G antennas available/gain */
-#define HNBU_RDLID 0x10 /* 2 byte USB remote downloader (RDL) product Id */
-#define HNBU_RSSISMBXA2G 0x11 /* 4328 2G RSSI mid pt sel & board switch arch,
- * 2 bytes, rev 3.
- */
-#define HNBU_RSSISMBXA5G 0x12 /* 4328 5G RSSI mid pt sel & board switch arch,
- * 2 bytes, rev 3.
- */
-#define HNBU_XTALFREQ 0x13 /* 4 byte Crystal frequency in kilohertz */
-#define HNBU_TRI2G 0x14 /* 4328 2G TR isolation, 1 byte */
-#define HNBU_TRI5G 0x15 /* 4328 5G TR isolation, 3 bytes */
-#define HNBU_RXPO2G 0x16 /* 4328 2G RX power offset, 1 byte */
-#define HNBU_RXPO5G 0x17 /* 4328 5G RX power offset, 1 byte */
-#define HNBU_BOARDNUM 0x18 /* board serial number, independent of mac addr */
-#define HNBU_MACADDR 0x19 /* mac addr override for the standard CIS LAN_NID */
-#define HNBU_RDLSN 0x1a /* 2 bytes; serial # advertised in USB descriptor */
-#define HNBU_BOARDTYPE 0x1b /* 2 bytes; boardtype */
-#define HNBU_LEDDC 0x1c /* 2 bytes; LED duty cycle */
-#define HNBU_HNBUCIS 0x1d /* what follows is proprietary HNBU CIS format */
-#define HNBU_PAPARMS_SSLPNPHY 0x1e /* SSLPNPHY PA params */
-#define HNBU_RSSISMBXA2G_SSLPNPHY 0x1f /* SSLPNPHY RSSI mid pt sel & board switch arch */
-#define HNBU_RDLRNDIS 0x20 /* 1 byte; 1 = RDL advertises RNDIS config */
-#define HNBU_CHAINSWITCH 0x21 /* 2 byte; txchain, rxchain */
-#define HNBU_REGREV 0x22 /* 1 byte; */
-#define HNBU_FEM 0x23 /* 2 or 4 byte: 11n frontend specification */
-#define HNBU_PAPARMS_C0 0x24 /* 8 or 30 bytes: 11n pa paramater for chain 0 */
-#define HNBU_PAPARMS_C1 0x25 /* 8 or 30 bytes: 11n pa paramater for chain 1 */
-#define HNBU_PAPARMS_C2 0x26 /* 8 or 30 bytes: 11n pa paramater for chain 2 */
-#define HNBU_PAPARMS_C3 0x27 /* 8 or 30 bytes: 11n pa paramater for chain 3 */
-#define HNBU_PO_CCKOFDM 0x28 /* 6 or 18 bytes: cck2g/ofdm2g/ofdm5g power offset */
-#define HNBU_PO_MCS2G 0x29 /* 8 bytes: mcs2g power offset */
-#define HNBU_PO_MCS5GM 0x2a /* 8 bytes: mcs5g mid band power offset */
-#define HNBU_PO_MCS5GLH 0x2b /* 16 bytes: mcs5g low-high band power offset */
-#define HNBU_PO_CDD 0x2c /* 2 bytes: cdd2g/5g power offset */
-#define HNBU_PO_STBC 0x2d /* 2 bytes: stbc2g/5g power offset */
-#define HNBU_PO_40M 0x2e /* 2 bytes: 40Mhz channel 2g/5g power offset */
-#define HNBU_PO_40MDUP 0x2f /* 2 bytes: 40Mhz channel dup 2g/5g power offset */
-
-#define HNBU_RDLRWU 0x30 /* 1 byte; 1 = RDL advertises Remote Wake-up */
-#define HNBU_WPS 0x31 /* 1 byte; GPIO pin for WPS button */
-#define HNBU_USBFS 0x32 /* 1 byte; 1 = USB advertises FS mode only */
-#define HNBU_BRMIN 0x33 /* 4 byte bootloader min resource mask */
-#define HNBU_BRMAX 0x34 /* 4 byte bootloader max resource mask */
-#define HNBU_PATCH 0x35 /* bootloader patch addr(2b) & data(4b) pair */
-#define HNBU_CCKFILTTYPE 0x36 /* CCK digital filter selection options */
-#define HNBU_OFDMPO5G 0x37 /* 4 * 3 = 12 byte 11a ofdm power offsets in rev 3 */
-
-#define HNBU_USBEPNUM 0x40 /* USB endpoint numbers */
-#define HNBU_SROM3SWRGN 0x80 /* 78 bytes; srom rev 3 s/w region without crc8
- * plus extra info appended.
- */
-#define HNBU_RESERVED 0x81 /* Reserved for non-BRCM post-mfg additions */
-#define HNBU_CUSTOM1 0x82 /* 4 byte; For non-BRCM post-mfg additions */
-#define HNBU_CUSTOM2 0x83 /* Reserved; For non-BRCM post-mfg additions */
-#endif /* !defined(ESTA_POSTMOGRIFY_REMOVAL) */
-
-/* sbtmstatelow */
-#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
-#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
-
-/* sbtmstatehigh */
-#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
-
-#endif /* _SBPCMCIA_H */
--
1.7.4.1
More information about the devel
mailing list