[PATCH] usbip: handle length at sysfs show() functions

matt mooney mfm at muteddisk.com
Wed Jun 29 02:45:28 UTC 2011


On 18:28 Mon 27 Jun     , David Chang wrote:
> Hi,
> 
> 2011/6/9 Greg KH <greg at kroah.com>
> 
> > On Wed, Jun 08, 2011 at 11:27:20PM +0200, N?meth M?rton wrote:
> > > > Ick, I doubt it as there are lots of tools that parse that file
> > already.
> > >
> > > usbip is still part of the staging directory. In dmesg the following
> > appear:
> > >
> > > | usbip_common_mod: module is from the staging directory, the quality is
> > unknown, you have been warned.
> > > | usbip_common_mod: usbip common driver1.0
> > > | vhci_hcd: module is from the staging directory, the quality is unknown,
> > you have been warned.
> > >
> > > so this means that usbip is a work-in-progress, it might be changed
> > anytime. On
> > > the other hand we can do this nice way: a new entry in
> >  Documentation/feature-removal-schedule.txt
> > > for /sys/devices/platform/vhci_hcd/status file removal, let's say it will
> > be
> > > removed before the usbip goes to mainline. In parallel the new interface
> > > can be developed.
> >
> > Or we can just fix it properly, as we have the userspace tools in the
> > kernel now as well, and the interface is obviously broken.  That's what
> > being in the staging tree allows us to do.
> >
> >
> >
> > > But yes, you are correct, this should not be in sysfs at all.
> > > >
> > > > What's the use for this file?  Who uses it?  Is it just debugging
> > > > output?  Information for people to gaze at if they feel like it?
> > > > Something else?
> > >
> > > Based on the user space source code at drivers/staging/usbip/userspace/
> > > I can identify the following usages:
> > >
> > > libsrc/vhci_driver.c::get_nports():
> > >  - finding out how many ports the VHCI has
> >
> > Is that really necessary as they are just "virtual" ports :)
> > We can put that in a single sysfs file if needed.
> >
> > > libsrc/vhci_driver.c::parse_status():
> > >  - VHCI port number to identify virtual ports
> > >  - fetching the status of each VHCI ports whether it is
> > >      - vdev does not connect a remote device: (status = VDEV_ST_NULL =
> > 4):
> > >        "Port Available"
> > >      - vdev is used, but the USB address is not assigned yet (status =
> > >        VDEV_ST_NOTASSIGNED = 5): "Port Initializing"
> > >      - used (status = VDEV_ST_USED = 6): "Port in Use"
> > >      - error (VDEV_ST_ERROR = 7): "Port Error"
> > >  - the speed can be unknown/low/full/high/variable
> > >  - it looks like the bus column was merged with the device column but I
> > >    currently cannot find when
> > >  - the device ID is splited to the upper 16bits: bus number, and lower
> > >    16bits: device number
> > >  - based on local_busid the usb device file can be found in /sys using
> > >    sysfs_open_device()
> >
> > All of those can be placed in individual files under the different port
> > directories, so we should be fine.
> >
> 
> I would like to help on this. :)
> 
> And I just want to make sure that I understand your discussion.
> 
> 1. remove current port status table file (
> /sys/devices/platform/vhci_hcd/status )
> 2. create each port in path "/sys/devices/platform/vhci-hcd" as a directory
> ( /sys/devices/platform/vhci_hcd/ports/[0][0-7] )
> 3. put the port info/status files into each port directory (
> /sys/devices/platform/vhci_hcd/ports/*/status )
> 
> Any suggestions are welcome, thanks!
> 

I think it seems like ../ports/.. is unnecessary. We should use
../vhci_hcd/*-*/status as suggested by Nemeth. I do believe that we will
probably need to encode the vhci-hcd port number in there somewhere to allow
remote devices on different machines but same busid to be imported.

Nemeth are you already working on this?

I need to add the `usbip port' command. I will add a template with some basic
functionality but will wait on the actual port access.

-mfm

> Regards,
> David Chang
> 
> 
> >
> > > Note that the socket parameter is only printed out as a debug
> > information: it
> > > is not used anywhere.
> > >
> > > Maybe most of the file content is redundant, because:
> > >
> > >  - we have /sys/bus/usb/devices/usb*/maxchild which is "number of ports
> > if hub"
> > >    according to linux/usb.h:410 ;
> >
> > Yes.
> >
> > >  - we have /sys/bus/usb/devices/*-*/speed to identify the device speed;
> >
> > Yes.
> >
> > >  - We have already bus number at /sys/bus/usb/devices/usb*/busnum or at
> > >    /sys/bus/usb/devices/*-*/busnum ;
> >
> > Yes.
> >
> > >  - we also have /sys/bus/usb/devices/*-*/devnum ;
> > >  - it is possbile to collect all the devices from
> > /sys/bus/usb/devices/*-*
> > >    filtering to the first number to /sys/bus/usb/devices/usb*/busnum .
> > >
> > > The only thing which is special for VHCI is the status for each port:
> > > DEV_ST_NULL/VDEV_ST_NOTASSIGNED/VDEV_ST_USED/VDEV_ST_ERROR .
> >
> > So we add a status file and we are set.
> >
> > Anyone care to send patches to fix this all up?
> >
> > thanks,
> >
> > greg k-h
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >



More information about the devel mailing list