[PATCH 43/83] staging: brcm80211: remove pci core defintion files

Roland Vossen rvossen at broadcom.com
Wed Jun 1 11:45:28 UTC 2011


From: Arend van Spriel <arend at broadcom.com>

The source file nicpci.c is the only file left which needs the
pci core register definitions. These definitions have been added
to the source file so the include files can be removed.

Signed-off-by: Arend van Spriel <arend at broadcom.com>
Reviewed-by: Roland Vossen <rvossen at broadcom.com>
---
 drivers/staging/brcm80211/brcmsmac/nicpci.c   |  160 +++++++++++++-
 drivers/staging/brcm80211/brcmsmac/nicpci.h   |   12 +
 drivers/staging/brcm80211/brcmsmac/wlc_bmac.c |    1 -
 drivers/staging/brcm80211/include/pci_core.h  |  122 ----------
 drivers/staging/brcm80211/include/pcie_core.h |  299 -------------------------
 5 files changed, 170 insertions(+), 424 deletions(-)
 delete mode 100644 drivers/staging/brcm80211/include/pci_core.h
 delete mode 100644 drivers/staging/brcm80211/include/pcie_core.h

diff --git a/drivers/staging/brcm80211/brcmsmac/nicpci.c b/drivers/staging/brcm80211/brcmsmac/nicpci.c
index c509c9a..e1612ec 100644
--- a/drivers/staging/brcm80211/brcmsmac/nicpci.c
+++ b/drivers/staging/brcm80211/brcmsmac/nicpci.c
@@ -24,13 +24,169 @@
 #include <bcmsoc.h>
 #include <bcmdevs.h>
 #include <sbchipc.h>
-#include <pci_core.h>
-#include <pcie_core.h>
 #include <nicpci.h>
 
+/* SPROM offsets */
+#define SRSH_ASPM_OFFSET		4	/* word 4 */
+#define SRSH_ASPM_ENB			0x18	/* bit 3, 4 */
+#define SRSH_ASPM_L1_ENB		0x10	/* bit 4 */
+#define SRSH_ASPM_L0s_ENB		0x8	/* bit 3 */
+
+#define SRSH_PCIE_MISC_CONFIG		5	/* word 5 */
+#define SRSH_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
+#define SRSH_CLKREQ_OFFSET_REV5		20	/* word 20 for srom rev <= 5 */
+#define SRSH_CLKREQ_ENB			0x0800	/* bit 11 */
+#define SRSH_BD_OFFSET                  6	/* word 6 */
+
 /* chipcontrol */
 #define CHIPCTRL_4321_PLL_DOWN	0x800000	/* serdes PLL down override */
 
+/* MDIO control */
+#define MDIOCTL_DIVISOR_MASK		0x7f	/* clock to be used on MDIO */
+#define MDIOCTL_DIVISOR_VAL		0x2
+#define MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
+#define MDIOCTL_ACCESS_DONE		0x100	/* Tranaction complete */
+
+/* MDIO Data */
+#define MDIODATA_MASK			0x0000ffff	/* data 2 bytes */
+#define MDIODATA_TA			0x00020000	/* Turnaround */
+#define MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
+#define MDIODATA_REGADDR_MASK_OLD	0x003c0000	/* Regaddr Mask (rev < 10) */
+#define MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
+#define MDIODATA_DEVADDR_MASK_OLD	0x0fc00000	/* Physmedia devaddr Mask (rev < 10) */
+#define MDIODATA_REGADDR_SHF		18	/* Regaddr shift */
+#define MDIODATA_REGADDR_MASK		0x007c0000	/* Regaddr Mask */
+#define MDIODATA_DEVADDR_SHF		23	/* Physmedia devaddr shift */
+#define MDIODATA_DEVADDR_MASK		0x0f800000	/* Physmedia devaddr Mask */
+#define MDIODATA_WRITE			0x10000000	/* write Transaction */
+#define MDIODATA_READ			0x20000000	/* Read Transaction */
+#define MDIODATA_START			0x40000000	/* start of Transaction */
+
+#define MDIODATA_DEV_ADDR		0x0	/* dev address for serdes */
+#define	MDIODATA_BLK_ADDR		0x1F	/* blk address for serdes */
+
+/* serdes regs (rev < 10) */
+#define MDIODATA_DEV_PLL       		0x1d	/* SERDES PLL Dev */
+#define MDIODATA_DEV_TX        		0x1e	/* SERDES TX Dev */
+#define MDIODATA_DEV_RX        		0x1f	/* SERDES RX Dev */
+
+	/* SERDES RX registers */
+#define SERDES_RX_CTRL			1	/* Rx cntrl */
+#define SERDES_RX_TIMER1		2	/* Rx Timer1 */
+#define SERDES_RX_CDR			6	/* CDR */
+#define SERDES_RX_CDRBW			7	/* CDR BW */
+	/* SERDES RX control register */
+#define SERDES_RX_CTRL_FORCE		0x80	/* rxpolarity_force */
+#define SERDES_RX_CTRL_POLARITY		0x40	/* rxpolarity_value */
+
+	/* SERDES PLL registers */
+#define SERDES_PLL_CTRL                 1	/* PLL control reg */
+#define PLL_CTRL_FREQDET_EN             0x4000	/* bit 14 is FREQDET on */
+
+/* Linkcontrol reg offset in PCIE Cap */
+#define PCIE_CAP_LINKCTRL_OFFSET	16	/* linkctrl offset in pcie cap */
+#define PCIE_CAP_LCREG_ASPML0s		0x01	/* ASPM L0s in linkctrl */
+#define PCIE_CAP_LCREG_ASPML1		0x02	/* ASPM L1 in linkctrl */
+#define PCIE_CLKREQ_ENAB		0x100	/* CLKREQ Enab in linkctrl */
+
+#define PCIE_ASPM_ENAB			3	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_L1_ENAB		2	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_L0s_ENAB		1	/* ASPM L0s & L1 in linkctrl */
+#define PCIE_ASPM_DISAB			0	/* ASPM L0s & L1 in linkctrl */
+
+/* Power management threshold */
+#define PCIE_L1THRESHOLDTIME_MASK       0xFF00	/* bits 8 - 15 */
+#define PCIE_L1THRESHOLDTIME_SHIFT      8	/* PCIE_L1THRESHOLDTIME_SHIFT */
+#define PCIE_L1THRESHOLD_WARVAL         0x72	/* WAR value */
+#define PCIE_ASPMTIMER_EXTEND		0x01000000	/* > rev7: enable extend ASPM timer */
+
+/* different register spaces to access thr'u pcie indirect access */
+#define PCIE_CONFIGREGS 	1	/* Access to config space */
+#define PCIE_PCIEREGS 		2	/* Access to pcie registers */
+
+/* PCIE protocol PHY diagnostic registers */
+#define	PCIE_PLP_STATUSREG		0x204	/* Status */
+
+/* Status reg PCIE_PLP_STATUSREG */
+#define PCIE_PLP_POLARITYINV_STAT	0x10
+
+/* PCIE protocol DLLP diagnostic registers */
+#define PCIE_DLLP_LCREG			0x100	/* Link Control */
+#define PCIE_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
+
+/* PCIE protocol TLP diagnostic registers */
+#define PCIE_TLP_WORKAROUNDSREG		0x004	/* TLP Workarounds */
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/* Sonics side: PCI core and host control registers */
+struct sbpciregs {
+	u32 control;		/* PCI control */
+	u32 PAD[3];
+	u32 arbcontrol;	/* PCI arbiter control */
+	u32 clkrun;		/* Clkrun Control (>=rev11) */
+	u32 PAD[2];
+	u32 intstatus;	/* Interrupt status */
+	u32 intmask;		/* Interrupt mask */
+	u32 sbtopcimailbox;	/* Sonics to PCI mailbox */
+	u32 PAD[9];
+	u32 bcastaddr;	/* Sonics broadcast address */
+	u32 bcastdata;	/* Sonics broadcast data */
+	u32 PAD[2];
+	u32 gpioin;		/* ro: gpio input (>=rev2) */
+	u32 gpioout;		/* rw: gpio output (>=rev2) */
+	u32 gpioouten;	/* rw: gpio output enable (>= rev2) */
+	u32 gpiocontrol;	/* rw: gpio control (>= rev2) */
+	u32 PAD[36];
+	u32 sbtopci0;	/* Sonics to PCI translation 0 */
+	u32 sbtopci1;	/* Sonics to PCI translation 1 */
+	u32 sbtopci2;	/* Sonics to PCI translation 2 */
+	u32 PAD[189];
+	u32 pcicfg[4][64];	/* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
+	u16 sprom[36];	/* SPROM shadow Area */
+	u32 PAD[46];
+};
+
+/* SB side: PCIE core and host control registers */
+typedef struct sbpcieregs {
+	u32 control;		/* host mode only */
+	u32 PAD[2];
+	u32 biststatus;	/* bist Status: 0x00C */
+	u32 gpiosel;		/* PCIE gpio sel: 0x010 */
+	u32 gpioouten;	/* PCIE gpio outen: 0x14 */
+	u32 PAD[2];
+	u32 intstatus;	/* Interrupt status: 0x20 */
+	u32 intmask;		/* Interrupt mask: 0x24 */
+	u32 sbtopcimailbox;	/* sb to pcie mailbox: 0x028 */
+	u32 PAD[53];
+	u32 sbtopcie0;	/* sb to pcie translation 0: 0x100 */
+	u32 sbtopcie1;	/* sb to pcie translation 1: 0x104 */
+	u32 sbtopcie2;	/* sb to pcie translation 2: 0x108 */
+	u32 PAD[5];
+
+	/* pcie core supports in direct access to config space */
+	u32 configaddr;	/* pcie config space access: Address field: 0x120 */
+	u32 configdata;	/* pcie config space access: Data field: 0x124 */
+
+	/* mdio access to serdes */
+	u32 mdiocontrol;	/* controls the mdio access: 0x128 */
+	u32 mdiodata;	/* Data to the mdio access: 0x12c */
+
+	/* pcie protocol phy/dllp/tlp register indirect access mechanism */
+	u32 pcieindaddr;	/* indirect access to the internal register: 0x130 */
+	u32 pcieinddata;	/* Data to/from the internal regsiter: 0x134 */
+
+	u32 clkreqenctrl;	/* >= rev 6, Clkreq rdma control : 0x138 */
+	u32 PAD[177];
+	u32 pciecfg[4][64];	/* 0x400 - 0x7FF, PCIE Cfg Space */
+	u16 sprom[64];	/* SPROM shadow Area */
+} sbpcieregs_t;
+
 typedef struct {
 	union {
 		sbpcieregs_t *pcieregs;
diff --git a/drivers/staging/brcm80211/brcmsmac/nicpci.h b/drivers/staging/brcm80211/brcmsmac/nicpci.h
index f1441c5..0e65b11 100644
--- a/drivers/staging/brcm80211/brcmsmac/nicpci.h
+++ b/drivers/staging/brcm80211/brcmsmac/nicpci.h
@@ -56,6 +56,18 @@
 /* bar0 + 12K accesses chipc core registers */
 #define PCI_16KB0_CCREGS_OFFSET	(12 * 1024)
 
+#define PCI_CLKRUN_DSBL	0x8000	/* Bit 15 forceClkrun */
+
+/* Sonics to PCI translation types */
+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
+#define	SBTOPCI_BURST	0x8		/* burst enable */
+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
+
+/* PCI core index in SROM shadow area */
+#define SRSH_PI_OFFSET	0	/* first word */
+#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
+#define SRSH_PI_SHIFT	12	/* bit 15:12 */
+
 struct si_pub;
 
 extern void *pcicore_init(struct si_pub *sih, void *pdev, void *regs);
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
index 2ee0785..d069ebe 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
@@ -48,7 +48,6 @@
 #include "wl_export.h"
 #include "wl_ucode.h"
 #include "wlc_antsel.h"
-#include "pcie_core.h"
 #include "wlc_alloc.h"
 #include "wl_dbg.h"
 #include "wlc_bmac.h"
diff --git a/drivers/staging/brcm80211/include/pci_core.h b/drivers/staging/brcm80211/include/pci_core.h
deleted file mode 100644
index 9153dcb..0000000
--- a/drivers/staging/brcm80211/include/pci_core.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef	_PCI_CORE_H_
-#define	_PCI_CORE_H_
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define	_PADLINE(line)	pad ## line
-#define	_XSTR(line)	_PADLINE(line)
-#define	PAD		_XSTR(__LINE__)
-#endif
-
-/* Sonics side: PCI core and host control registers */
-struct sbpciregs {
-	u32 control;		/* PCI control */
-	u32 PAD[3];
-	u32 arbcontrol;	/* PCI arbiter control */
-	u32 clkrun;		/* Clkrun Control (>=rev11) */
-	u32 PAD[2];
-	u32 intstatus;	/* Interrupt status */
-	u32 intmask;		/* Interrupt mask */
-	u32 sbtopcimailbox;	/* Sonics to PCI mailbox */
-	u32 PAD[9];
-	u32 bcastaddr;	/* Sonics broadcast address */
-	u32 bcastdata;	/* Sonics broadcast data */
-	u32 PAD[2];
-	u32 gpioin;		/* ro: gpio input (>=rev2) */
-	u32 gpioout;		/* rw: gpio output (>=rev2) */
-	u32 gpioouten;	/* rw: gpio output enable (>= rev2) */
-	u32 gpiocontrol;	/* rw: gpio control (>= rev2) */
-	u32 PAD[36];
-	u32 sbtopci0;	/* Sonics to PCI translation 0 */
-	u32 sbtopci1;	/* Sonics to PCI translation 1 */
-	u32 sbtopci2;	/* Sonics to PCI translation 2 */
-	u32 PAD[189];
-	u32 pcicfg[4][64];	/* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
-	u16 sprom[36];	/* SPROM shadow Area */
-	u32 PAD[46];
-};
-
-#endif				/* _LANGUAGE_ASSEMBLY */
-
-/* PCI control */
-#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-#define PCI_RST		0x02	/* Value driven out to pin */
-#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
-#define PCI_CLK		0x08	/* Gate for clock driven out to pin */
-
-/* PCI arbiter control */
-#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
-#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
-/* ParkID - for PCI corerev >= 8 */
-#define PCI_PARKID_MASK		0x1c	/* Selects which agent is parked on an idle bus */
-#define PCI_PARKID_SHIFT	2
-#define PCI_PARKID_EXT0		0	/* External master 0 */
-#define PCI_PARKID_EXT1		1	/* External master 1 */
-#define PCI_PARKID_EXT2		2	/* External master 2 */
-#define PCI_PARKID_EXT3		3	/* External master 3 (rev >= 11) */
-#define PCI_PARKID_INT		3	/* Internal master (rev < 11) */
-#define PCI11_PARKID_INT	4	/* Internal master (rev >= 11) */
-#define PCI_PARKID_LAST		4	/* Last active master (rev < 11) */
-#define PCI11_PARKID_LAST	5	/* Last active master (rev >= 11) */
-
-#define PCI_CLKRUN_DSBL	0x8000	/* Bit 15 forceClkrun */
-
-/* Interrupt status/mask */
-#define PCI_INTA	0x01	/* PCI INTA# is asserted */
-#define PCI_INTB	0x02	/* PCI INTB# is asserted */
-#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
-#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
-#define PCI_PME		0x10	/* PCI PME# is asserted */
-
-/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
-#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
-#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
-#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
-#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
-#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
-#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
-#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
-
-/* Sonics broadcast address */
-#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
-
-/* Sonics to PCI translation types */
-#define SBTOPCI0_MASK	0xfc000000
-#define SBTOPCI1_MASK	0xfc000000
-#define SBTOPCI2_MASK	0xc0000000
-#define SBTOPCI_MEM	0
-#define SBTOPCI_IO	1
-#define SBTOPCI_CFG0	2
-#define SBTOPCI_CFG1	3
-#define	SBTOPCI_PREF	0x4	/* prefetch enable */
-#define	SBTOPCI_BURST	0x8	/* burst enable */
-#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
-#define	SBTOPCI_RC_READ		0x00	/* memory read */
-#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
-#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
-
-/* PCI core index in SROM shadow area */
-#define SRSH_PI_OFFSET	0	/* first word */
-#define SRSH_PI_MASK	0xf000	/* bit 15:12 */
-#define SRSH_PI_SHIFT	12	/* bit 15:12 */
-
-#endif				/* _PCI_CORE_H_ */
diff --git a/drivers/staging/brcm80211/include/pcie_core.h b/drivers/staging/brcm80211/include/pcie_core.h
deleted file mode 100644
index cd54ddc..0000000
--- a/drivers/staging/brcm80211/include/pcie_core.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef	_PCIE_CORE_H
-#define	_PCIE_CORE_H
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define	_PADLINE(line)	pad ## line
-#define	_XSTR(line)	_PADLINE(line)
-#define	PAD		_XSTR(__LINE__)
-#endif
-
-/* PCIE Enumeration space offsets */
-#define  PCIE_CORE_CONFIG_OFFSET	0x0
-#define  PCIE_FUNC0_CONFIG_OFFSET	0x400
-#define  PCIE_FUNC1_CONFIG_OFFSET	0x500
-#define  PCIE_FUNC2_CONFIG_OFFSET	0x600
-#define  PCIE_FUNC3_CONFIG_OFFSET	0x700
-#define  PCIE_SPROM_SHADOW_OFFSET	0x800
-#define  PCIE_SBCONFIG_OFFSET		0xE00
-
-/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
-#define PCIE_DEV_BAR0_SIZE		0x4000
-#define PCIE_BAR0_WINMAPCORE_OFFSET	0x0
-#define PCIE_BAR0_EXTSPROM_OFFSET	0x1000
-#define PCIE_BAR0_PCIECORE_OFFSET	0x2000
-#define PCIE_BAR0_CCCOREREG_OFFSET	0x3000
-
-/* different register spaces to access thr'u pcie indirect access */
-#define PCIE_CONFIGREGS 	1	/* Access to config space */
-#define PCIE_PCIEREGS 		2	/* Access to pcie registers */
-
-/* SB side: PCIE core and host control registers */
-typedef struct sbpcieregs {
-	u32 control;		/* host mode only */
-	u32 PAD[2];
-	u32 biststatus;	/* bist Status: 0x00C */
-	u32 gpiosel;		/* PCIE gpio sel: 0x010 */
-	u32 gpioouten;	/* PCIE gpio outen: 0x14 */
-	u32 PAD[2];
-	u32 intstatus;	/* Interrupt status: 0x20 */
-	u32 intmask;		/* Interrupt mask: 0x24 */
-	u32 sbtopcimailbox;	/* sb to pcie mailbox: 0x028 */
-	u32 PAD[53];
-	u32 sbtopcie0;	/* sb to pcie translation 0: 0x100 */
-	u32 sbtopcie1;	/* sb to pcie translation 1: 0x104 */
-	u32 sbtopcie2;	/* sb to pcie translation 2: 0x108 */
-	u32 PAD[5];
-
-	/* pcie core supports in direct access to config space */
-	u32 configaddr;	/* pcie config space access: Address field: 0x120 */
-	u32 configdata;	/* pcie config space access: Data field: 0x124 */
-
-	/* mdio access to serdes */
-	u32 mdiocontrol;	/* controls the mdio access: 0x128 */
-	u32 mdiodata;	/* Data to the mdio access: 0x12c */
-
-	/* pcie protocol phy/dllp/tlp register indirect access mechanism */
-	u32 pcieindaddr;	/* indirect access to the internal register: 0x130 */
-	u32 pcieinddata;	/* Data to/from the internal regsiter: 0x134 */
-
-	u32 clkreqenctrl;	/* >= rev 6, Clkreq rdma control : 0x138 */
-	u32 PAD[177];
-	u32 pciecfg[4][64];	/* 0x400 - 0x7FF, PCIE Cfg Space */
-	u16 sprom[64];	/* SPROM shadow Area */
-} sbpcieregs_t;
-
-/* PCI control */
-#define PCIE_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-#define PCIE_RST	0x02	/* Value driven out to pin */
-
-#define	PCIE_CFGADDR	0x120	/* offsetof(configaddr) */
-#define	PCIE_CFGDATA	0x124	/* offsetof(configdata) */
-
-/* Interrupt status/mask */
-#define PCIE_INTA	0x01	/* PCIE INTA message is received */
-#define PCIE_INTB	0x02	/* PCIE INTB message is received */
-#define PCIE_INTFATAL	0x04	/* PCIE INTFATAL message is received */
-#define PCIE_INTNFATAL	0x08	/* PCIE INTNONFATAL message is received */
-#define PCIE_INTCORR	0x10	/* PCIE INTCORR message is received */
-#define PCIE_INTPME	0x20	/* PCIE INTPME message is received */
-
-/* SB to PCIE translation masks */
-#define SBTOPCIE0_MASK	0xfc000000
-#define SBTOPCIE1_MASK	0xfc000000
-#define SBTOPCIE2_MASK	0xc0000000
-
-/* Access type bits (0:1) */
-#define SBTOPCIE_MEM	0
-#define SBTOPCIE_IO	1
-#define SBTOPCIE_CFG0	2
-#define SBTOPCIE_CFG1	3
-
-/* Prefetch enable bit 2 */
-#define SBTOPCIE_PF		4
-
-/* Write Burst enable for memory write bit 3 */
-#define SBTOPCIE_WR_BURST	8
-
-/* config access */
-#define CONFIGADDR_FUNC_MASK	0x7000
-#define CONFIGADDR_FUNC_SHF	12
-#define CONFIGADDR_REG_MASK	0x0FFF
-#define CONFIGADDR_REG_SHF	0
-
-#define PCIE_CONFIG_INDADDR(f, r)	\
-	((((f) & CONFIGADDR_FUNC_MASK) << CONFIGADDR_FUNC_SHF) | \
-	(((r) & CONFIGADDR_REG_MASK) << CONFIGADDR_REG_SHF))
-
-/* PCIE protocol regs Indirect Address */
-#define PCIEADDR_PROT_MASK	0x300
-#define PCIEADDR_PROT_SHF	8
-#define PCIEADDR_PL_TLP		0
-#define PCIEADDR_PL_DLLP	1
-#define PCIEADDR_PL_PLP		2
-
-/* PCIE protocol PHY diagnostic registers */
-#define	PCIE_PLP_MODEREG		0x200	/* Mode */
-#define	PCIE_PLP_STATUSREG		0x204	/* Status */
-#define PCIE_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
-#define PCIE_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
-#define PCIE_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
-#define PCIE_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
-#define PCIE_PLP_ATTNREG		0x218	/* Attention */
-#define PCIE_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
-#define PCIE_PLP_RXERRCTR		0x220	/* Rx Error */
-#define PCIE_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
-#define PCIE_PLP_RXERRTHRESHREG		0x228	/* Rx Error threshold */
-#define PCIE_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
-#define PCIE_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
-#define PCIE_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
-#define PCIE_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
-#define PCIE_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */
-
-/* PCIE protocol DLLP diagnostic registers */
-#define PCIE_DLLP_LCREG			0x100	/* Link Control */
-#define PCIE_DLLP_LSREG			0x104	/* Link Status */
-#define PCIE_DLLP_LAREG			0x108	/* Link Attention */
-#define PCIE_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
-#define PCIE_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
-#define PCIE_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
-#define PCIE_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
-#define PCIE_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
-#define PCIE_DLLP_LRREG			0x120	/* Link Replay */
-#define PCIE_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
-#define PCIE_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
-#define PCIE_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
-#define PCIE_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
-#define PCIE_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
-#define PCIE_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
-#define PCIE_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
-#define PCIE_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
-#define PCIE_DLLP_ERRCTRREG		0x144	/* Error Counter */
-#define PCIE_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
-#define PCIE_DLLP_TESTREG		0x14C	/* Test */
-#define PCIE_DLLP_PKTBIST		0x150	/* Packet BIST */
-#define PCIE_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */
-
-#define PCIE_DLLP_LSREG_LINKUP		(1 << 16)
-
-/* PCIE protocol TLP diagnostic registers */
-#define PCIE_TLP_CONFIGREG		0x000	/* Configuration */
-#define PCIE_TLP_WORKAROUNDSREG		0x004	/* TLP Workarounds */
-#define PCIE_TLP_WRDMAUPPER		0x010	/* Write DMA Upper Address */
-#define PCIE_TLP_WRDMALOWER		0x014	/* Write DMA Lower Address */
-#define PCIE_TLP_WRDMAREQ_LBEREG	0x018	/* Write DMA Len/ByteEn Req */
-#define PCIE_TLP_RDDMAUPPER		0x01C	/* Read DMA Upper Address */
-#define PCIE_TLP_RDDMALOWER		0x020	/* Read DMA Lower Address */
-#define PCIE_TLP_RDDMALENREG		0x024	/* Read DMA Len Req */
-#define PCIE_TLP_MSIDMAUPPER		0x028	/* MSI DMA Upper Address */
-#define PCIE_TLP_MSIDMALOWER		0x02C	/* MSI DMA Lower Address */
-#define PCIE_TLP_MSIDMALENREG		0x030	/* MSI DMA Len Req */
-#define PCIE_TLP_SLVREQLENREG		0x034	/* Slave Request Len */
-#define PCIE_TLP_FCINPUTSREQ		0x038	/* Flow Control Inputs */
-#define PCIE_TLP_TXSMGRSREQ		0x03C	/* Tx StateMachine and Gated Req */
-#define PCIE_TLP_ADRACKCNTARBLEN	0x040	/* Address Ack XferCnt and ARB Len */
-#define PCIE_TLP_DMACPLHDR0		0x044	/* DMA Completion Hdr 0 */
-#define PCIE_TLP_DMACPLHDR1		0x048	/* DMA Completion Hdr 1 */
-#define PCIE_TLP_DMACPLHDR2		0x04C	/* DMA Completion Hdr 2 */
-#define PCIE_TLP_DMACPLMISC0		0x050	/* DMA Completion Misc0 */
-#define PCIE_TLP_DMACPLMISC1		0x054	/* DMA Completion Misc1 */
-#define PCIE_TLP_DMACPLMISC2		0x058	/* DMA Completion Misc2 */
-#define PCIE_TLP_SPTCTRLLEN		0x05C	/* Split Controller Req len */
-#define PCIE_TLP_SPTCTRLMSIC0		0x060	/* Split Controller Misc 0 */
-#define PCIE_TLP_SPTCTRLMSIC1		0x064	/* Split Controller Misc 1 */
-#define PCIE_TLP_BUSDEVFUNC		0x068	/* Bus/Device/Func */
-#define PCIE_TLP_RESETCTR		0x06C	/* Reset Counter */
-#define PCIE_TLP_RTRYBUF		0x070	/* Retry Buffer value */
-#define PCIE_TLP_TGTDEBUG1		0x074	/* Target Debug Reg1 */
-#define PCIE_TLP_TGTDEBUG2		0x078	/* Target Debug Reg2 */
-#define PCIE_TLP_TGTDEBUG3		0x07C	/* Target Debug Reg3 */
-#define PCIE_TLP_TGTDEBUG4		0x080	/* Target Debug Reg4 */
-
-/* MDIO control */
-#define MDIOCTL_DIVISOR_MASK		0x7f	/* clock to be used on MDIO */
-#define MDIOCTL_DIVISOR_VAL		0x2
-#define MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
-#define MDIOCTL_ACCESS_DONE		0x100	/* Tranaction complete */
-
-/* MDIO Data */
-#define MDIODATA_MASK			0x0000ffff	/* data 2 bytes */
-#define MDIODATA_TA			0x00020000	/* Turnaround */
-#define MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
-#define MDIODATA_REGADDR_MASK_OLD	0x003c0000	/* Regaddr Mask (rev < 10) */
-#define MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
-#define MDIODATA_DEVADDR_MASK_OLD	0x0fc00000	/* Physmedia devaddr Mask (rev < 10) */
-#define MDIODATA_REGADDR_SHF		18	/* Regaddr shift */
-#define MDIODATA_REGADDR_MASK		0x007c0000	/* Regaddr Mask */
-#define MDIODATA_DEVADDR_SHF		23	/* Physmedia devaddr shift */
-#define MDIODATA_DEVADDR_MASK		0x0f800000	/* Physmedia devaddr Mask */
-#define MDIODATA_WRITE			0x10000000	/* write Transaction */
-#define MDIODATA_READ			0x20000000	/* Read Transaction */
-#define MDIODATA_START			0x40000000	/* start of Transaction */
-
-#define MDIODATA_DEV_ADDR		0x0	/* dev address for serdes */
-#define	MDIODATA_BLK_ADDR		0x1F	/* blk address for serdes */
-
-/* MDIO devices (SERDES modules)
- *  unlike old pcie cores (rev < 10), rev10 pcie serde organizes registers into a few blocks.
- *  two layers mapping (blockidx, register offset) is required
- */
-#define MDIO_DEV_IEEE0		0x000
-#define MDIO_DEV_IEEE1		0x001
-#define MDIO_DEV_BLK0		0x800
-#define MDIO_DEV_BLK1		0x801
-#define MDIO_DEV_BLK2		0x802
-#define MDIO_DEV_BLK3		0x803
-#define MDIO_DEV_BLK4		0x804
-#define MDIO_DEV_TXPLL		0x808	/* TXPLL register block idx */
-#define MDIO_DEV_TXCTRL0	0x820
-#define MDIO_DEV_SERDESID	0x831
-#define MDIO_DEV_RXCTRL0	0x840
-
-/* serdes regs (rev < 10) */
-#define MDIODATA_DEV_PLL       		0x1d	/* SERDES PLL Dev */
-#define MDIODATA_DEV_TX        		0x1e	/* SERDES TX Dev */
-#define MDIODATA_DEV_RX        		0x1f	/* SERDES RX Dev */
-	/* SERDES RX registers */
-#define SERDES_RX_CTRL			1	/* Rx cntrl */
-#define SERDES_RX_TIMER1		2	/* Rx Timer1 */
-#define SERDES_RX_CDR			6	/* CDR */
-#define SERDES_RX_CDRBW			7	/* CDR BW */
-
-	/* SERDES RX control register */
-#define SERDES_RX_CTRL_FORCE		0x80	/* rxpolarity_force */
-#define SERDES_RX_CTRL_POLARITY		0x40	/* rxpolarity_value */
-
-	/* SERDES PLL registers */
-#define SERDES_PLL_CTRL                 1	/* PLL control reg */
-#define PLL_CTRL_FREQDET_EN             0x4000	/* bit 14 is FREQDET on */
-
-/* Power management threshold */
-#define PCIE_L0THRESHOLDTIME_MASK       0xFF00	/* bits 0 - 7 */
-#define PCIE_L1THRESHOLDTIME_MASK       0xFF00	/* bits 8 - 15 */
-#define PCIE_L1THRESHOLDTIME_SHIFT      8	/* PCIE_L1THRESHOLDTIME_SHIFT */
-#define PCIE_L1THRESHOLD_WARVAL         0x72	/* WAR value */
-#define PCIE_ASPMTIMER_EXTEND		0x01000000	/* > rev7: enable extend ASPM timer */
-
-/* SPROM offsets */
-#define SRSH_ASPM_OFFSET		4	/* word 4 */
-#define SRSH_ASPM_ENB			0x18	/* bit 3, 4 */
-#define SRSH_ASPM_L1_ENB		0x10	/* bit 4 */
-#define SRSH_ASPM_L0s_ENB		0x8	/* bit 3 */
-#define SRSH_PCIE_MISC_CONFIG		5	/* word 5 */
-#define SRSH_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
-#define SRSH_CLKREQ_OFFSET_REV5		20	/* word 20 for srom rev <= 5 */
-#define SRSH_CLKREQ_OFFSET_REV8		52	/* word 52 for srom rev 8 */
-#define SRSH_CLKREQ_ENB			0x0800	/* bit 11 */
-#define SRSH_BD_OFFSET                  6	/* word 6 */
-#define SRSH_AUTOINIT_OFFSET            18	/* auto initialization enable */
-
-/* Linkcontrol reg offset in PCIE Cap */
-#define PCIE_CAP_LINKCTRL_OFFSET	16	/* linkctrl offset in pcie cap */
-#define PCIE_CAP_LCREG_ASPML0s		0x01	/* ASPM L0s in linkctrl */
-#define PCIE_CAP_LCREG_ASPML1		0x02	/* ASPM L1 in linkctrl */
-#define PCIE_CLKREQ_ENAB		0x100	/* CLKREQ Enab in linkctrl */
-
-#define PCIE_ASPM_ENAB			3	/* ASPM L0s & L1 in linkctrl */
-#define PCIE_ASPM_L1_ENAB		2	/* ASPM L0s & L1 in linkctrl */
-#define PCIE_ASPM_L0s_ENAB		1	/* ASPM L0s & L1 in linkctrl */
-#define PCIE_ASPM_DISAB			0	/* ASPM L0s & L1 in linkctrl */
-
-/* Status reg PCIE_PLP_STATUSREG */
-#define PCIE_PLP_POLARITYINV_STAT	0x10
-#endif				/* _PCIE_CORE_H */
-- 
1.7.4.1





More information about the devel mailing list