[PATCH 16/29] staging: brcm80211: remove vendor and device id check from brcmfmac
Arend van Spriel
arend at broadcom.com
Fri Jul 22 18:57:03 UTC 2011
From: Franky Lin <frankyl at broadcom.com>
mmc core is handling the vendor/device id check and matching drivers
with devices. No need to do it again in driver.
Cc: devel at linuxdriverproject.org
Cc: linux-wireless at vger.kernel.org
Reviewed-by: Roland Vossen <rvossen at broadcom.com>
Signed-off-by: Arend van Spriel <arend at broadcom.com>
---
drivers/staging/brcm80211/brcmfmac/bcmsdh.c | 14 +------
drivers/staging/brcm80211/brcmfmac/dhd_bus.h | 5 +-
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c | 53 +++---------------------
drivers/staging/brcm80211/brcmfmac/sdio_host.h | 3 -
4 files changed, 9 insertions(+), 66 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
index 82d9d2c..3208a11 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
@@ -44,7 +44,6 @@
struct brcmf_sdio_card {
bool init_success; /* underlying driver successfully attached */
void *sdioh; /* handler for sdioh */
- u32 vendevid; /* Target Vendor and Device ID on SD bus */
bool regfail; /* Save status of last
reg_read/reg_write call */
u32 sbwad; /* Save backplane window address */
@@ -399,12 +398,6 @@ int brcmf_sdcard_abort(struct brcmf_sdio_card *card, uint fn)
return brcmf_sdioh_abort(card->sdioh, fn);
}
-int brcmf_sdcard_query_device(struct brcmf_sdio_card *card)
-{
- card->vendevid = (PCI_VENDOR_ID_BROADCOM << 16) | 0;
- return card->vendevid;
-}
-
u32 brcmf_sdcard_cur_sbwad(struct brcmf_sdio_card *card)
{
return card->sbwad;
@@ -413,7 +406,6 @@ u32 brcmf_sdcard_cur_sbwad(struct brcmf_sdio_card *card)
int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
{
u32 regs = 0;
- u32 vendevid;
int ret = 0;
sdiodev->card = kzalloc(sizeof(struct brcmf_sdio_card), GFP_ATOMIC);
@@ -436,12 +428,8 @@ int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
/* Report the BAR, to fix if needed */
sdiodev->card->sbwad = SI_ENUM_BASE;
- /* Read the vendor/device ID from the CIS */
- vendevid = brcmf_sdcard_query_device(sdiodev->card);
-
/* try to attach to the target device */
- sdiodev->bus = brcmf_sdbrcm_probe((vendevid >> 16), (vendevid & 0xFFFF),
- 0, 0, 0, 0, regs, sdiodev->card);
+ sdiodev->bus = brcmf_sdbrcm_probe(0, 0, 0, 0, regs, sdiodev->card);
if (!sdiodev->bus) {
BRCMF_ERROR(("%s: device attach failed\n", __func__));
ret = -ENODEV;
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_bus.h b/drivers/staging/brcm80211/brcmfmac/dhd_bus.h
index 0fb3250..4521fe5 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_bus.h
@@ -75,8 +75,7 @@ extern void brcmf_bus_clearcounts(struct brcmf_pub *drvr);
extern void brcmf_sdbrcm_wd_timer(struct brcmf_bus *bus, uint wdtick);
-extern void *brcmf_sdbrcm_probe(u16 venid, u16 devid, u16 bus_no,
- u16 slot, u16 func, uint bustype, u32 regsva,
- void *card);
+extern void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
+ u32 regsva, void *card);
extern void brcmf_sdbrcm_disconnect(void *ptr);
#endif /* _BRCMF_BUS_H_ */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 1b84767..bd83da3 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -625,8 +625,6 @@ struct brcmf_bus {
bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */
bool fcstate; /* State of dongle flow-control */
- u16 cl_devid; /* cached devid for brcmf_sdio_probe_attach() */
-
uint blocksize; /* Block size of SDIO transfers */
uint roundup; /* Max roundup limit */
@@ -964,7 +962,7 @@ static void brcmf_sdbrcm_release(struct brcmf_bus *bus);
static void brcmf_sdbrcm_release_malloc(struct brcmf_bus *bus);
static bool brcmf_sdbrcm_chipmatch(u16 chipid);
static bool brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, void *card,
- u32 regsva, u16 devid);
+ u32 regsva);
static bool brcmf_sdbrcm_probe_malloc(struct brcmf_bus *bus, void *card);
static bool brcmf_sdbrcm_probe_init(struct brcmf_bus *bus, void *card);
static void brcmf_sdbrcm_release_dongle(struct brcmf_bus *bus);
@@ -5430,9 +5428,8 @@ static bool brcmf_sdbrcm_chipmatch(u16 chipid)
return false;
}
-void *brcmf_sdbrcm_probe(u16 venid, u16 devid, u16 bus_no,
- u16 slot, u16 func, uint bustype, u32 regsva,
- void *card)
+void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
+ u32 regsva, void *card)
{
int ret;
struct brcmf_bus *bus;
@@ -5459,45 +5456,10 @@ void *brcmf_sdbrcm_probe(u16 venid, u16 devid, u16 bus_no,
brcmf_c_init();
BRCMF_TRACE(("%s: Enter\n", __func__));
- BRCMF_INFO(("%s: venid 0x%04x devid 0x%04x\n", __func__, venid, devid));
/* We make an assumption about address window mappings:
* regsva == SI_ENUM_BASE*/
- /* SDIO car passes venid and devid based on CIS parsing -- but
- * low-power start
- * means early parse could fail, so here we should get either an ID
- * we recognize OR (-1) indicating we must request power first.
- */
- /* Check the Vendor ID */
- switch (venid) {
- case 0x0000:
- case PCI_VENDOR_ID_BROADCOM:
- break;
- default:
- BRCMF_ERROR(("%s: unknown vendor: 0x%04x\n", __func__, venid));
- return NULL;
- }
-
- /* Check the Device ID and make sure it's one that we support */
- switch (devid) {
- case BCM4329_D11NDUAL_ID: /* 4329 802.11n dualband device */
- case BCM4329_D11N2G_ID: /* 4329 802.11n 2.4G device */
- case BCM4329_D11N5G_ID: /* 4329 802.11n 5G device */
- case 0x4329:
- BRCMF_INFO(("%s: found 4329 Dongle\n", __func__));
- break;
- case 0:
- BRCMF_INFO(("%s: allow device id 0, will check chip"
- " internals\n", __func__));
- break;
-
- default:
- BRCMF_ERROR(("%s: skipping 0x%04x/0x%04x, not a dongle\n",
- __func__, venid, devid));
- return NULL;
- }
-
/* Allocate private bus interface state */
bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
if (!bus) {
@@ -5506,14 +5468,13 @@ void *brcmf_sdbrcm_probe(u16 venid, u16 devid, u16 bus_no,
goto fail;
}
bus->card = card;
- bus->cl_devid = (u16) devid;
bus->bus = BRCMF_BUS;
bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
bus->usebufpool = false; /* Use bufpool if allocated,
else use locally malloced rxbuf */
/* attempt to attach to the dongle */
- if (!(brcmf_sdbrcm_probe_attach(bus, card, regsva, devid))) {
+ if (!(brcmf_sdbrcm_probe_attach(bus, card, regsva))) {
BRCMF_ERROR(("%s: brcmf_sdbrcm_probe_attach failed\n",
__func__));
goto fail;
@@ -5623,8 +5584,7 @@ fail:
}
static bool
-brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, void *card, u32 regsva,
- u16 devid)
+brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, void *card, u32 regsva)
{
u8 clkctl = 0;
int err = 0;
@@ -6170,8 +6130,7 @@ int brcmf_bus_devreset(struct brcmf_pub *drvr, u8 flag)
/* Attempt to re-attach & download */
if (brcmf_sdbrcm_probe_attach(bus, bus->card,
- SI_ENUM_BASE,
- bus->cl_devid)) {
+ SI_ENUM_BASE)) {
/* Attempt to download binary to the dongle */
if (brcmf_sdbrcm_probe_init(bus, bus->card)) {
/* Re-init bus, enable F2 transfer */
diff --git a/drivers/staging/brcm80211/brcmfmac/sdio_host.h b/drivers/staging/brcm80211/brcmfmac/sdio_host.h
index 3d6c261..22441e9 100644
--- a/drivers/staging/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/staging/brcm80211/brcmfmac/sdio_host.h
@@ -268,9 +268,6 @@ extern int brcmf_sdcard_rwdata(struct brcmf_sdio_card *card, uint rw, u32 addr,
/* Issue an abort to the specified function */
extern int brcmf_sdcard_abort(struct brcmf_sdio_card *card, uint fn);
-/* Returns the "Device ID" of target device on the SDIO bus. */
-extern int brcmf_sdcard_query_device(struct brcmf_sdio_card *card);
-
/* Miscellaneous knob tweaker. */
extern int brcmf_sdcard_iovar_op(struct brcmf_sdio_card *card, const char *name,
void *params, int plen, void *arg, int len,
--
1.7.4.1
More information about the devel
mailing list