[PATCH 20/31] staging: brcm80211: deleted two fullmac source files
Arend van Spriel
arend at broadcom.com
Tue Jul 5 22:02:47 UTC 2011
From: Roland Vossen <rvossen at broadcom.com>
Having both a 'generic' as a 'linux' specific variant of a file makes
no sense in a Linux environment. Merged bcmsdh_sdmmc_linux.c into
bcmsdh_sdmmc.c, and bcmsdh_linux.c into bcmsdh.c.
Signed-off-by: Arend van Spriel <arend at broadcom.com>
---
drivers/staging/brcm80211/brcmfmac/Makefile | 4 +-
drivers/staging/brcm80211/brcmfmac/bcmsdh.c | 150 +++++++++++-
drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c | 178 -------------
drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 246 ++++++++++++++++++-
.../brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c | 260 --------------------
5 files changed, 394 insertions(+), 444 deletions(-)
delete mode 100644 drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
delete mode 100644 drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
diff --git a/drivers/staging/brcm80211/brcmfmac/Makefile b/drivers/staging/brcm80211/brcmfmac/Makefile
index c38fa55..da3c805 100644
--- a/drivers/staging/brcm80211/brcmfmac/Makefile
+++ b/drivers/staging/brcm80211/brcmfmac/Makefile
@@ -33,9 +33,7 @@ DHDOFILES = \
dhd_sdio.o \
dhd_linux.o \
bcmsdh.o \
- bcmsdh_linux.o \
- bcmsdh_sdmmc.o \
- bcmsdh_sdmmc_linux.o
+ bcmsdh_sdmmc.o
obj-$(CONFIG_BRCMFMAC) += brcmfmac.o
brcmfmac-objs += $(DHDOFILES)
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
index 97c0f9d..5fdeeaf 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
@@ -17,8 +17,10 @@
#include <linux/types.h>
#include <linux/netdevice.h>
+#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/sched.h>
+#include <linux/completion.h>
#include <defs.h>
#include <brcm_hw_ids.h>
@@ -29,12 +31,15 @@
#include "sbsdio.h" /* BRCM sdio device core */
#include "dngl_stats.h"
#include "dhd.h"
+#include "dhd_bus.h"
+#include "sdio_host.h"
#define SDIOH_API_ACCESS_RETRY_LIMIT 2
#define BRCMF_SD_ERROR_VAL 0x0001 /* Error */
#define BRCMF_SD_INFO_VAL 0x0002 /* Info */
+
#ifdef BCMDBG
#define BRCMF_SD_ERROR(x) \
do { \
@@ -53,7 +58,8 @@
#define BRCMF_SD_INFO(x)
#endif /* BCMDBG */
-const uint brcmf_sdio_msglevel = BRCMF_SD_ERROR_VAL;
+/* debugging macros */
+#define SDLX_MSG(x)
struct brcmf_sdio_card {
bool init_success; /* underlying driver successfully attached */
@@ -63,9 +69,46 @@ struct brcmf_sdio_card {
reg_read/reg_write call */
u32 sbwad; /* Save backplane window address */
};
+
+/**
+ * SDIO Host Controller info
+ */
+struct sdio_hc {
+ struct sdio_hc *next;
+ struct device *dev; /* platform device handle */
+ void *regs; /* SDIO Host Controller address */
+ struct brcmf_sdio_card *card;
+ void *ch;
+ unsigned int oob_irq;
+ unsigned long oob_flags; /* OOB Host specifiction
+ as edge and etc */
+ bool oob_irq_registered;
+};
+
/* local copy of bcm sd handler */
static struct brcmf_sdio_card *l_card;
+const uint brcmf_sdio_msglevel = BRCMF_SD_ERROR_VAL;
+
+static struct sdio_hc *sdhcinfo;
+
+/* driver info, initialized when brcmf_sdio_register is called */
+static struct brcmf_sdioh_driver drvinfo = { NULL, NULL };
+
+/* Module parameters specific to each host-controller driver */
+
+module_param(sd_msglevel, uint, 0);
+
+extern uint sd_f2_blocksize;
+module_param(sd_f2_blocksize, int, 0);
+
+/* forward declarations */
+int brcmf_sdio_probe(struct device *dev);
+EXPORT_SYMBOL(brcmf_sdio_probe);
+
+int brcmf_sdio_remove(struct device *dev);
+EXPORT_SYMBOL(brcmf_sdio_remove);
+
struct brcmf_sdio_card*
brcmf_sdcard_attach(void *cfghdl, u32 *regsva, uint irq)
{
@@ -500,3 +543,108 @@ u32 brcmf_sdcard_cur_sbwad(struct brcmf_sdio_card *card)
return card->sbwad;
}
+
+int brcmf_sdio_probe(struct device *dev)
+{
+ struct sdio_hc *sdhc = NULL;
+ u32 regs = 0;
+ struct brcmf_sdio_card *card = NULL;
+ int irq = 0;
+ u32 vendevid;
+ unsigned long irq_flags = 0;
+
+ /* allocate SDIO Host Controller state info */
+ sdhc = kzalloc(sizeof(struct sdio_hc), GFP_ATOMIC);
+ if (!sdhc) {
+ SDLX_MSG(("%s: out of memory\n", __func__));
+ goto err;
+ }
+ sdhc->dev = (void *)dev;
+
+ card = brcmf_sdcard_attach((void *)0, ®s, irq);
+ if (!card) {
+ SDLX_MSG(("%s: attach failed\n", __func__));
+ goto err;
+ }
+
+ sdhc->card = card;
+ sdhc->oob_irq = irq;
+ sdhc->oob_flags = irq_flags;
+ sdhc->oob_irq_registered = false; /* to make sure.. */
+
+ /* chain SDIO Host Controller info together */
+ sdhc->next = sdhcinfo;
+ sdhcinfo = sdhc;
+ /* Read the vendor/device ID from the CIS */
+ vendevid = brcmf_sdcard_query_device(card);
+
+ /* try to attach to the target device */
+ sdhc->ch = drvinfo.attach((vendevid >> 16), (vendevid & 0xFFFF),
+ 0, 0, 0, 0, regs, card);
+ if (!sdhc->ch) {
+ SDLX_MSG(("%s: device attach failed\n", __func__));
+ goto err;
+ }
+
+ return 0;
+
+ /* error handling */
+err:
+ if (sdhc) {
+ if (sdhc->card)
+ brcmf_sdcard_detach(sdhc->card);
+ kfree(sdhc);
+ }
+
+ return -ENODEV;
+}
+
+int brcmf_sdio_remove(struct device *dev)
+{
+ struct sdio_hc *sdhc, *prev;
+
+ sdhc = sdhcinfo;
+ drvinfo.detach(sdhc->ch);
+ brcmf_sdcard_detach(sdhc->card);
+ /* find the SDIO Host Controller state for this pdev
+ and take it out from the list */
+ for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
+ if (sdhc->dev == (void *)dev) {
+ if (prev)
+ prev->next = sdhc->next;
+ else
+ sdhcinfo = NULL;
+ break;
+ }
+ prev = sdhc;
+ }
+ if (!sdhc) {
+ SDLX_MSG(("%s: failed\n", __func__));
+ return 0;
+ }
+
+ /* release SDIO Host Controller info */
+ kfree(sdhc);
+ return 0;
+}
+
+int brcmf_sdio_register(struct brcmf_sdioh_driver *driver)
+{
+ drvinfo = *driver;
+
+ SDLX_MSG(("Linux Kernel SDIO/MMC Driver\n"));
+ return brcmf_sdio_function_init();
+}
+
+void brcmf_sdio_unregister(void)
+{
+ brcmf_sdio_function_cleanup();
+}
+
+void brcmf_sdio_wdtmr_enable(bool enable)
+{
+ if (enable)
+ brcmf_sdbrcm_wd_timer(sdhcinfo->ch, brcmf_watchdog_ms);
+ else
+ brcmf_sdbrcm_wd_timer(sdhcinfo->ch, 0);
+}
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
deleted file mode 100644
index ec7d79d..0000000
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-/**
- * @file bcmsdh_linux.c
- */
-
-#define __UNDEF_NO_VERSION__
-
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-
-#include <defs.h>
-#include <brcm_hw_ids.h>
-#include <brcmu_utils.h>
-#include <brcmu_wifi.h>
-#include "sdio_host.h"
-
-#include "dngl_stats.h"
-#include "dhd.h"
-#include "dhd_bus.h"
-#include "bcmsdbus.h"
-
-/**
- * SDIO Host Controller info
- */
-struct sdio_hc {
- struct sdio_hc *next;
- struct device *dev; /* platform device handle */
- void *regs; /* SDIO Host Controller address */
- struct brcmf_sdio_card *card;
- void *ch;
- unsigned int oob_irq;
- unsigned long oob_flags; /* OOB Host specifiction
- as edge and etc */
- bool oob_irq_registered;
-};
-static struct sdio_hc *sdhcinfo;
-
-/* driver info, initialized when brcmf_sdio_register is called */
-static struct brcmf_sdioh_driver drvinfo = { NULL, NULL };
-
-/* debugging macros */
-#define SDLX_MSG(x)
-
-/* forward declarations */
-int brcmf_sdio_probe(struct device *dev);
-EXPORT_SYMBOL(brcmf_sdio_probe);
-
-int brcmf_sdio_remove(struct device *dev);
-EXPORT_SYMBOL(brcmf_sdio_remove);
-
-int brcmf_sdio_probe(struct device *dev)
-{
- struct sdio_hc *sdhc = NULL;
- u32 regs = 0;
- struct brcmf_sdio_card *card = NULL;
- int irq = 0;
- u32 vendevid;
- unsigned long irq_flags = 0;
-
- /* allocate SDIO Host Controller state info */
- sdhc = kzalloc(sizeof(struct sdio_hc), GFP_ATOMIC);
- if (!sdhc) {
- SDLX_MSG(("%s: out of memory\n", __func__));
- goto err;
- }
- sdhc->dev = (void *)dev;
-
- card = brcmf_sdcard_attach((void *)0, ®s, irq);
- if (!card) {
- SDLX_MSG(("%s: attach failed\n", __func__));
- goto err;
- }
-
- sdhc->card = card;
- sdhc->oob_irq = irq;
- sdhc->oob_flags = irq_flags;
- sdhc->oob_irq_registered = false; /* to make sure.. */
-
- /* chain SDIO Host Controller info together */
- sdhc->next = sdhcinfo;
- sdhcinfo = sdhc;
- /* Read the vendor/device ID from the CIS */
- vendevid = brcmf_sdcard_query_device(card);
-
- /* try to attach to the target device */
- sdhc->ch = drvinfo.attach((vendevid >> 16), (vendevid & 0xFFFF),
- 0, 0, 0, 0, regs, card);
- if (!sdhc->ch) {
- SDLX_MSG(("%s: device attach failed\n", __func__));
- goto err;
- }
-
- return 0;
-
- /* error handling */
-err:
- if (sdhc) {
- if (sdhc->card)
- brcmf_sdcard_detach(sdhc->card);
- kfree(sdhc);
- }
-
- return -ENODEV;
-}
-
-int brcmf_sdio_remove(struct device *dev)
-{
- struct sdio_hc *sdhc, *prev;
-
- sdhc = sdhcinfo;
- drvinfo.detach(sdhc->ch);
- brcmf_sdcard_detach(sdhc->card);
- /* find the SDIO Host Controller state for this pdev
- and take it out from the list */
- for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
- if (sdhc->dev == (void *)dev) {
- if (prev)
- prev->next = sdhc->next;
- else
- sdhcinfo = NULL;
- break;
- }
- prev = sdhc;
- }
- if (!sdhc) {
- SDLX_MSG(("%s: failed\n", __func__));
- return 0;
- }
-
- /* release SDIO Host Controller info */
- kfree(sdhc);
- return 0;
-}
-
-int brcmf_sdio_register(struct brcmf_sdioh_driver *driver)
-{
- drvinfo = *driver;
-
- SDLX_MSG(("Linux Kernel SDIO/MMC Driver\n"));
- return brcmf_sdio_function_init();
-}
-
-void brcmf_sdio_unregister(void)
-{
- brcmf_sdio_function_cleanup();
-}
-
-/* Module parameters specific to each host-controller driver */
-
-module_param(sd_msglevel, uint, 0);
-
-extern uint sd_f2_blocksize;
-module_param(sd_f2_blocksize, int, 0);
-
-void brcmf_sdio_wdtmr_enable(bool enable)
-{
- if (enable)
- brcmf_sdbrcm_wd_timer(sdhcinfo->ch, brcmf_watchdog_ms);
- else
- brcmf_sdbrcm_wd_timer(sdhcinfo->ch, 0);
-}
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 76a2c8b..d4a380c 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -19,8 +19,11 @@
#include <linux/mmc/core.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/card.h>
#include <linux/suspend.h>
#include <linux/errno.h>
+#include <linux/sched.h> /* request_irq() */
+#include <net/cfg80211.h>
#include <defs.h>
#include <brcm_hw_ids.h>
@@ -30,6 +33,8 @@
#include "bcmsdbus.h"
#include "dngl_stats.h"
#include "dhd.h"
+#include "dhd_dbg.h"
+#include "wl_cfg80211.h"
#define BLOCK_SIZE_64 64
#define BLOCK_SIZE_512 512
@@ -41,20 +46,95 @@
#define CLIENT_INTR 0x100 /* Get rid of this! */
+#if !defined(SDIO_VENDOR_ID_BROADCOM)
+#define SDIO_VENDOR_ID_BROADCOM 0x02d0
+#endif /* !defined(SDIO_VENDOR_ID_BROADCOM) */
+
+#define SDIO_DEVICE_ID_BROADCOM_DEFAULT 0x0000
+
+#define DMA_ALIGN_MASK 0x03
+
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB)
+#define SDIO_DEVICE_ID_BROADCOM_4325_SDGWB 0x0492 /* BCM94325SDGWB */
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4325)
+#define SDIO_DEVICE_ID_BROADCOM_4325 0x0493
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4329)
+#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4319)
+#define SDIO_DEVICE_ID_BROADCOM_4319 0x4319
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
+
+struct sdos_info {
+ struct sdioh_info *sd;
+ spinlock_t lock;
+};
+
static void brcmf_sdioh_irqhandler(struct sdio_func *func);
static void brcmf_sdioh_irqhandler_f2(struct sdio_func *func);
static int brcmf_sdioh_get_cisaddr(struct sdioh_info *sd, u32 regaddr);
+static int brcmf_ops_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id);
+static void brcmf_ops_sdio_remove(struct sdio_func *func);
+
+#ifdef CONFIG_PM
+static int brcmf_sdio_suspend(struct device *dev);
+static int brcmf_sdio_resume(struct device *dev);
+#endif /* CONFIG_PM */
uint sd_f2_blocksize = 512; /* Default blocksize */
uint sd_msglevel = 0x01;
+
+/* module param defaults */
+static int clockoverride;
+
+module_param(clockoverride, int, 0644);
+MODULE_PARM_DESC(clockoverride, "SDIO card clock override");
+
+struct brcmf_sdmmc_instance *gInstance;
+
+struct device sdmmc_dev;
+
+/* devices we support, null terminated */
+static const struct sdio_device_id brcmf_sdmmc_ids[] = {
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_DEFAULT)},
+ {SDIO_DEVICE
+ (SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325_SDGWB)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4319)},
+ { /* end: all zeroes */ },
+};
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops brcmf_sdio_pm_ops = {
+ .suspend = brcmf_sdio_suspend,
+ .resume = brcmf_sdio_resume,
+};
+#endif /* CONFIG_PM */
+
+static struct sdio_driver brcmf_sdmmc_driver = {
+ .probe = brcmf_ops_sdio_probe,
+ .remove = brcmf_ops_sdio_remove,
+ .name = "brcmfmac",
+ .id_table = brcmf_sdmmc_ids,
+#ifdef CONFIG_PM
+ .drv = {
+ .pm = &brcmf_sdio_pm_ops,
+ },
+#endif /* CONFIG_PM */
+};
+
+MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
+
BRCMF_PM_RESUME_WAIT_INIT(sdioh_request_byte_wait);
BRCMF_PM_RESUME_WAIT_INIT(sdioh_request_word_wait);
BRCMF_PM_RESUME_WAIT_INIT(sdioh_request_packet_wait);
BRCMF_PM_RESUME_WAIT_INIT(sdioh_request_buffer_wait);
-#define DMA_ALIGN_MASK 0x03
-
static int
brcmf_sdioh_card_regread(struct sdioh_info *sd, int func, u32 regaddr,
int regsize, u32 *data);
@@ -904,3 +984,165 @@ static void brcmf_sdioh_irqhandler_f2(struct sdio_func *func)
sd = gInstance->sd;
}
+
+static int brcmf_ops_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ int ret = 0;
+ static struct sdio_func sdio_func_0;
+ sd_trace(("sdio_probe: %s Enter\n", __func__));
+ sd_trace(("sdio_probe: func->class=%x\n", func->class));
+ sd_trace(("sdio_vendor: 0x%04x\n", func->vendor));
+ sd_trace(("sdio_device: 0x%04x\n", func->device));
+ sd_trace(("Function#: 0x%04x\n", func->num));
+
+ if (func->num == 1) {
+ sdio_func_0.num = 0;
+ sdio_func_0.card = func->card;
+ gInstance->func[0] = &sdio_func_0;
+ if (func->device == 0x4) { /* 4318 */
+ gInstance->func[2] = NULL;
+ sd_trace(("NIC found, calling brcmf_sdio_probe...\n"));
+ ret = brcmf_sdio_probe(&sdmmc_dev);
+ }
+ }
+
+ gInstance->func[func->num] = func;
+
+ if (func->num == 2) {
+ brcmf_cfg80211_sdio_func(func);
+ sd_trace(("F2 found, calling brcmf_sdio_probe...\n"));
+ ret = brcmf_sdio_probe(&sdmmc_dev);
+ }
+
+ return ret;
+}
+
+static void brcmf_ops_sdio_remove(struct sdio_func *func)
+{
+ sd_trace(("%s Enter\n", __func__));
+ sd_info(("func->class=%x\n", func->class));
+ sd_info(("sdio_vendor: 0x%04x\n", func->vendor));
+ sd_info(("sdio_device: 0x%04x\n", func->device));
+ sd_info(("Function#: 0x%04x\n", func->num));
+
+ if (func->num == 2) {
+ sd_trace(("F2 found, calling brcmf_sdio_remove...\n"));
+ brcmf_sdio_remove(&sdmmc_dev);
+ }
+}
+
+
+#ifdef CONFIG_PM
+static int brcmf_sdio_suspend(struct device *dev)
+{
+ mmc_pm_flag_t sdio_flags;
+ int ret = 0;
+
+ sd_trace(("%s\n", __func__));
+
+ sdio_flags = sdio_get_host_pm_caps(gInstance->func[1]);
+ if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+ sd_err(("Host can't keep power while suspended\n"));
+ return -EINVAL;
+ }
+
+ ret = sdio_set_host_pm_flags(gInstance->func[1], MMC_PM_KEEP_POWER);
+ if (ret) {
+ sd_err(("Failed to set pm_flags\n"));
+ return ret;
+ }
+
+ brcmf_sdio_wdtmr_enable(false);
+
+ return ret;
+}
+
+static int brcmf_sdio_resume(struct device *dev)
+{
+ brcmf_sdio_wdtmr_enable(true);
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+int brcmf_sdioh_osinit(struct sdioh_info *sd)
+{
+ struct sdos_info *sdos;
+
+ sdos = kmalloc(sizeof(struct sdos_info), GFP_ATOMIC);
+ sd->sdos_info = (void *)sdos;
+ if (sdos == NULL)
+ return -ENOMEM;
+
+ sdos->sd = sd;
+ spin_lock_init(&sdos->lock);
+ return 0;
+}
+
+void brcmf_sdioh_osfree(struct sdioh_info *sd)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ kfree(sdos);
+}
+
+/* Interrupt enable/disable */
+int brcmf_sdioh_interrupt_set(struct sdioh_info *sd, bool enable)
+{
+ unsigned long flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %s\n", __func__, enable ? "Enabling" : "Disabling"));
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+
+ if (enable && !(sd->intr_handler && sd->intr_handler_arg)) {
+ sd_err(("%s: no handler registered, will not enable\n",
+ __func__));
+ return -EINVAL;
+ }
+
+ /* Ensure atomicity for enable/disable calls */
+ spin_lock_irqsave(&sdos->lock, flags);
+
+ sd->client_intr_enabled = enable;
+ if (enable)
+ brcmf_sdioh_dev_intr_on(sd);
+ else
+ brcmf_sdioh_dev_intr_off(sd);
+
+ spin_unlock_irqrestore(&sdos->lock, flags);
+
+ return 0;
+}
+
+/*
+ * module init
+*/
+int brcmf_sdio_function_init(void)
+{
+ int error = 0;
+ sd_trace(("brcmf_sdio_function_init: %s Enter\n", __func__));
+
+ gInstance = kzalloc(sizeof(struct brcmf_sdmmc_instance), GFP_KERNEL);
+ if (!gInstance)
+ return -ENOMEM;
+
+ memset(&sdmmc_dev, 0, sizeof(sdmmc_dev));
+ error = sdio_register_driver(&brcmf_sdmmc_driver);
+
+ return error;
+}
+
+/*
+ * module cleanup
+*/
+void brcmf_sdio_function_cleanup(void)
+{
+ sd_trace(("%s Enter\n", __func__));
+
+ sdio_unregister_driver(&brcmf_sdmmc_driver);
+
+ kfree(gInstance);
+}
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
deleted file mode 100644
index 7d4b2e3..0000000
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#include <linux/types.h>
-#include <linux/sched.h> /* request_irq() */
-#include <linux/netdevice.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/errno.h>
-#include <net/cfg80211.h>
-
-#include <defs.h>
-#include <brcmu_utils.h>
-#include <brcmu_wifi.h>
-#include "sdio_host.h"
-#include "bcmsdbus.h"
-#include "dngl_stats.h"
-#include "dhd.h"
-
-#if !defined(SDIO_VENDOR_ID_BROADCOM)
-#define SDIO_VENDOR_ID_BROADCOM 0x02d0
-#endif /* !defined(SDIO_VENDOR_ID_BROADCOM) */
-
-#define SDIO_DEVICE_ID_BROADCOM_DEFAULT 0x0000
-
-#if !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB)
-#define SDIO_DEVICE_ID_BROADCOM_4325_SDGWB 0x0492 /* BCM94325SDGWB */
-#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB) */
-#if !defined(SDIO_DEVICE_ID_BROADCOM_4325)
-#define SDIO_DEVICE_ID_BROADCOM_4325 0x0493
-#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325) */
-#if !defined(SDIO_DEVICE_ID_BROADCOM_4329)
-#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329
-#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
-#if !defined(SDIO_DEVICE_ID_BROADCOM_4319)
-#define SDIO_DEVICE_ID_BROADCOM_4319 0x4319
-#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
-
-#include "dhd_dbg.h"
-#include "wl_cfg80211.h"
-
-/* module param defaults */
-static int clockoverride;
-
-module_param(clockoverride, int, 0644);
-MODULE_PARM_DESC(clockoverride, "SDIO card clock override");
-
-struct brcmf_sdmmc_instance *gInstance;
-
-struct device sdmmc_dev;
-
-static int brcmf_ops_sdio_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
-{
- int ret = 0;
- static struct sdio_func sdio_func_0;
- sd_trace(("sdio_probe: %s Enter\n", __func__));
- sd_trace(("sdio_probe: func->class=%x\n", func->class));
- sd_trace(("sdio_vendor: 0x%04x\n", func->vendor));
- sd_trace(("sdio_device: 0x%04x\n", func->device));
- sd_trace(("Function#: 0x%04x\n", func->num));
-
- if (func->num == 1) {
- sdio_func_0.num = 0;
- sdio_func_0.card = func->card;
- gInstance->func[0] = &sdio_func_0;
- if (func->device == 0x4) { /* 4318 */
- gInstance->func[2] = NULL;
- sd_trace(("NIC found, calling brcmf_sdio_probe...\n"));
- ret = brcmf_sdio_probe(&sdmmc_dev);
- }
- }
-
- gInstance->func[func->num] = func;
-
- if (func->num == 2) {
- brcmf_cfg80211_sdio_func(func);
- sd_trace(("F2 found, calling brcmf_sdio_probe...\n"));
- ret = brcmf_sdio_probe(&sdmmc_dev);
- }
-
- return ret;
-}
-
-static void brcmf_ops_sdio_remove(struct sdio_func *func)
-{
- sd_trace(("%s Enter\n", __func__));
- sd_info(("func->class=%x\n", func->class));
- sd_info(("sdio_vendor: 0x%04x\n", func->vendor));
- sd_info(("sdio_device: 0x%04x\n", func->device));
- sd_info(("Function#: 0x%04x\n", func->num));
-
- if (func->num == 2) {
- sd_trace(("F2 found, calling brcmf_sdio_remove...\n"));
- brcmf_sdio_remove(&sdmmc_dev);
- }
-}
-
-/* devices we support, null terminated */
-static const struct sdio_device_id brcmf_sdmmc_ids[] = {
- {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_DEFAULT)},
- {SDIO_DEVICE
- (SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325_SDGWB)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4319)},
- { /* end: all zeroes */ },
-};
-
-MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
-
-#ifdef CONFIG_PM
-static int brcmf_sdio_suspend(struct device *dev)
-{
- mmc_pm_flag_t sdio_flags;
- int ret = 0;
-
- sd_trace(("%s\n", __func__));
-
- sdio_flags = sdio_get_host_pm_caps(gInstance->func[1]);
- if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
- sd_err(("Host can't keep power while suspended\n"));
- return -EINVAL;
- }
-
- ret = sdio_set_host_pm_flags(gInstance->func[1], MMC_PM_KEEP_POWER);
- if (ret) {
- sd_err(("Failed to set pm_flags\n"));
- return ret;
- }
-
- brcmf_sdio_wdtmr_enable(false);
-
- return ret;
-}
-
-static int brcmf_sdio_resume(struct device *dev)
-{
- brcmf_sdio_wdtmr_enable(true);
- return 0;
-}
-
-static const struct dev_pm_ops brcmf_sdio_pm_ops = {
- .suspend = brcmf_sdio_suspend,
- .resume = brcmf_sdio_resume,
-};
-#endif /* CONFIG_PM */
-
-static struct sdio_driver brcmf_sdmmc_driver = {
- .probe = brcmf_ops_sdio_probe,
- .remove = brcmf_ops_sdio_remove,
- .name = "brcmfmac",
- .id_table = brcmf_sdmmc_ids,
-#ifdef CONFIG_PM
- .drv = {
- .pm = &brcmf_sdio_pm_ops,
- },
-#endif /* CONFIG_PM */
-};
-
-struct sdos_info {
- struct sdioh_info *sd;
- spinlock_t lock;
-};
-
-int brcmf_sdioh_osinit(struct sdioh_info *sd)
-{
- struct sdos_info *sdos;
-
- sdos = kmalloc(sizeof(struct sdos_info), GFP_ATOMIC);
- sd->sdos_info = (void *)sdos;
- if (sdos == NULL)
- return -ENOMEM;
-
- sdos->sd = sd;
- spin_lock_init(&sdos->lock);
- return 0;
-}
-
-void brcmf_sdioh_osfree(struct sdioh_info *sd)
-{
- struct sdos_info *sdos;
-
- sdos = (struct sdos_info *)sd->sdos_info;
- kfree(sdos);
-}
-
-/* Interrupt enable/disable */
-int brcmf_sdioh_interrupt_set(struct sdioh_info *sd, bool enable)
-{
- unsigned long flags;
- struct sdos_info *sdos;
-
- sd_trace(("%s: %s\n", __func__, enable ? "Enabling" : "Disabling"));
-
- sdos = (struct sdos_info *)sd->sdos_info;
-
- if (enable && !(sd->intr_handler && sd->intr_handler_arg)) {
- sd_err(("%s: no handler registered, will not enable\n",
- __func__));
- return -EINVAL;
- }
-
- /* Ensure atomicity for enable/disable calls */
- spin_lock_irqsave(&sdos->lock, flags);
-
- sd->client_intr_enabled = enable;
- if (enable)
- brcmf_sdioh_dev_intr_on(sd);
- else
- brcmf_sdioh_dev_intr_off(sd);
-
- spin_unlock_irqrestore(&sdos->lock, flags);
-
- return 0;
-}
-
-/*
- * module init
-*/
-int brcmf_sdio_function_init(void)
-{
- int error = 0;
- sd_trace(("brcmf_sdio_function_init: %s Enter\n", __func__));
-
- gInstance = kzalloc(sizeof(struct brcmf_sdmmc_instance), GFP_KERNEL);
- if (!gInstance)
- return -ENOMEM;
-
- memset(&sdmmc_dev, 0, sizeof(sdmmc_dev));
- error = sdio_register_driver(&brcmf_sdmmc_driver);
-
- return error;
-}
-
-/*
- * module cleanup
-*/
-void brcmf_sdio_function_cleanup(void)
-{
- sd_trace(("%s Enter\n", __func__));
-
- sdio_unregister_driver(&brcmf_sdmmc_driver);
-
- kfree(gInstance);
-}
--
1.7.4.1
More information about the devel
mailing list