[PATCH 03/12] rtl8192e: Delete dead code
Denis Kirjanov
kirjanov at gmail.com
Thu Jan 27 20:07:44 UTC 2011
On Thu, Jan 27, 2011 at 5:10 PM, Mike McCormack <mikem at ring3k.org> wrote:
> Signed-off-by: Mike McCormack <mikem at ring3k.org>
> ---
> drivers/staging/rtl8192e/r8190_rtl8256.c | 10 -----
> drivers/staging/rtl8192e/r8192E_core.c | 23 -----------
> drivers/staging/rtl8192e/r8192E_dm.c | 62 ++---------------------------
> 3 files changed, 5 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
> index 642f3bf..bad800a 100644
> --- a/drivers/staging/rtl8192e/r8190_rtl8256.c
> +++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
> @@ -432,7 +432,6 @@ SetRFPowerState8190(
>
> if(priv->SetRFPowerStateInProgress == true)
> return false;
> - //RT_TRACE(COMP_PS, "===========> SetRFPowerState8190()!\n");
> priv->SetRFPowerStateInProgress = true;
>
> switch(priv->rf_chip)
> @@ -441,7 +440,6 @@ SetRFPowerState8190(
> switch( eRFPowerState )
> {
> case eRfOn:
> - //RT_TRACE(COMP_PS, "SetRFPowerState8190() eRfOn !\n");
> //RXTX enable control: On
> //for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
> // PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
> @@ -620,7 +618,6 @@ SetRFPowerState8190(
> break;
>
> case eRfOff:
> - //RT_TRACE(COMP_PS, "SetRFPowerState8190() eRfOff/Sleep !\n");
>
> // Update current RF state variable.
> //priv->ieee80211->eRFPowerState = eRFPowerState;
> @@ -718,9 +715,7 @@ SetRFPowerState8190(
> priv->ieee80211->eRFPowerState = eRFPowerState;
> }
>
> - //printk("%s()priv->ieee80211->eRFPowerState:%s\n" ,__func__,priv->ieee80211->eRFPowerState == eRfOn ? "On" : "Off");
> priv->SetRFPowerStateInProgress = false;
> - //RT_TRACE(COMP_PS, "<=========== SetRFPowerState8190() bResult = %d!\n", bResult);
> return bResult;
> }
>
> @@ -774,8 +769,6 @@ MgntDisconnectIBSS(
> u8 i;
> bool bFilterOutNonAssociatedBSSID = false;
>
> - //IEEE80211_DEBUG(IEEE80211_DL_TRACE, "XXXXXXXXXX MgntDisconnect IBSS\n");
> -
> priv->ieee80211->state = IEEE80211_NOLINK;
>
> // PlatformZeroMemory( pMgntInfo->Bssid, 6 );
> @@ -1003,7 +996,6 @@ MgntDisconnect(
> {
> if( priv->ieee80211->iw_mode == IW_MODE_ADHOC )
> {
> - //RT_TRACE(COMP_MLME, "MgntDisconnect() ===> MgntDisconnectIBSS\n");
> MgntDisconnectIBSS(dev);
> }
> if( priv->ieee80211->iw_mode == IW_MODE_INFRA )
> @@ -1013,7 +1005,6 @@ MgntDisconnect(
> // e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
> // used to handle disassociation related things to AP, e.g. send Disassoc
> // frame to AP. 2005.01.27, by rcnjko.
> - //IEEE80211_DEBUG(IEEE80211_DL_TRACE,"MgntDisconnect() ===> MgntDisconnectAP\n");
> MgntDisconnectAP(dev, asRsn);
> }
>
> @@ -1145,7 +1136,6 @@ MgntActSet_RF_State(
>
> if(bActionAllowed)
> {
> - RT_TRACE(COMP_POWER, "MgntActSet_RF_State(): Action is allowed.... StateToSet(%d), RfOffReason(%#X)\n", StateToSet, priv->ieee80211->RfOffReason);
> // Config HW to the specified mode.
> SetRFPowerState(dev, StateToSet);
> // Turn on RF.
I think It is not the dead code :)
> diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
> index 2a7f19b..342ccb6 100644
> --- a/drivers/staging/rtl8192e/r8192E_core.c
> +++ b/drivers/staging/rtl8192e/r8192E_core.c
> @@ -1685,7 +1685,6 @@ static void rtl8192_qos_activate(struct work_struct * work)
> (((u32)(qos_parameters->cw_max[i]))<< AC_PARAM_ECW_MAX_OFFSET)|
> (((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)|
> ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
> - //printk("===>u4bAcParam:%x, ", u4bAcParam);
> write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
> //write_nic_dword(dev, WDCAPARA_ADD[i], 0x005e4332);
> }
> @@ -3529,26 +3528,22 @@ static bool HalRxCheckStuck8190Pci(struct net_device *dev)
> {
> if(rx_chk_cnt < 4)
> {
> - //DbgPrint("RSSI < %d && RSSI >= %d, no check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
> return bStuck;
> }
> else
> {
> rx_chk_cnt = 0;
> - //DbgPrint("RSSI < %d && RSSI >= %d, check this time \n", RateAdaptiveTH_Low, VeryLowRSSI);
> }
> }
> else
> {
> if(rx_chk_cnt < 8)
> {
> - //DbgPrint("RSSI <= %d, no check this time \n", VeryLowRSSI);
> return bStuck;
> }
> else
> {
> rx_chk_cnt = 0;
> - //DbgPrint("RSSI <= %d, check this time \n", VeryLowRSSI);
> }
> }
> if(priv->RxCounter==RegRxCounter)
> @@ -4033,7 +4028,6 @@ IPSEnter(struct net_device *dev)
> && (priv->ieee80211->state != IEEE80211_LINKED) )
> {
> RT_TRACE(COMP_RF,"IPSEnter(): Turn off RF.\n");
> - //printk("IPSEnter(): Turn off RF.\n");
> pPSC->eInactivePowerState = eRfOff;
> // queue_work(priv->priv_wq,&(pPSC->InactivePsWorkItem));
> InactivePsWorkItemCallback(dev);
> @@ -4059,7 +4053,6 @@ IPSLeave(struct net_device *dev)
> if (rtState != eRfOn && !pPSC->bSwRfProcessing && priv->ieee80211->RfOffReason <= RF_CHANGE_BY_IPS)
> {
> RT_TRACE(COMP_POWER, "IPSLeave(): Turn on RF.\n");
> - //printk("IPSLeave(): Turn on RF.\n");
> pPSC->eInactivePowerState = eRfOn;
> // queue_work(priv->priv_wq,&(pPSC->InactivePsWorkItem));
> InactivePsWorkItemCallback(dev);
> @@ -4150,14 +4143,11 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
> return;
> hal_dm_watchdog(dev);
> #ifdef ENABLE_IPS
> -// printk("watch_dog ENABLE_IPS\n");
> if(ieee->actscanning == false){
> - //printk("%d,%d,%d,%d\n", ieee->eRFPowerState, ieee->is_set_key, ieee->proto_stoppping, ieee->wx_set_enc);
> if((ieee->iw_mode == IW_MODE_INFRA) && (ieee->state == IEEE80211_NOLINK) &&
> (ieee->eRFPowerState == eRfOn)&&!ieee->is_set_key &&
> (!ieee->proto_stoppping) && !ieee->wx_set_enc){
> if(ieee->PowerSaveControl.ReturnPoint == IPS_CALLBACK_NONE){
> - //printk("====================>haha:IPSEnter()\n");
> IPSEnter(dev);
> //ieee80211_stop_scan(priv->ieee80211);
> }
> @@ -4177,8 +4167,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
> if( ((ieee->LinkDetectInfo.NumRxUnicastOkInPeriod + ieee->LinkDetectInfo.NumTxOkInPeriod) > 8 ) ||
> (ieee->LinkDetectInfo.NumRxUnicastOkInPeriod > 2) )
> {
> - //printk("ieee->LinkDetectInfo.NumRxUnicastOkInPeriod is %d,ieee->LinkDetectInfo.NumTxOkInPeriod is %d\n",
> - // ieee->LinkDetectInfo.NumRxUnicastOkInPeriod,ieee->LinkDetectInfo.NumTxOkInPeriod);
> bEnterPS= false;
> }
> else
> @@ -4186,7 +4174,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
> bEnterPS= true;
> }
>
> - //printk("***bEnterPS = %d\n", bEnterPS);
> // LeisurePS only work in infra mode.
> if(bEnterPS)
> {
> @@ -4248,7 +4235,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
> {
> ResetType = rtl819x_ifcheck_resetornot(dev);
> check_reset_cnt = 3;
> - //DbgPrint("Start to check silent reset\n");
> }
> spin_unlock_irqrestore(&priv->tx_lock,flags);
> if(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_NORMAL)
> @@ -4784,7 +4770,6 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
> if(priv->stats.rx_rssi_percentage[rfpath] == 0)
> {
> priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath];
> - //DbgPrint("MIMO RSSI initialize \n");
> }
> if(pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath])
> {
> @@ -4816,12 +4801,10 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
> slide_beacon_adc_pwdb_statistics = PHY_Beacon_RSSI_SLID_WIN_MAX;
> last_beacon_adc_pwdb = priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index];
> priv->stats.Slide_Beacon_Total -= last_beacon_adc_pwdb;
> - //DbgPrint("slide_beacon_adc_pwdb_index = %d, last_beacon_adc_pwdb = %d, Adapter->RxStats.Slide_Beacon_Total = %d\n",
> // slide_beacon_adc_pwdb_index, last_beacon_adc_pwdb, Adapter->RxStats.Slide_Beacon_Total);
> }
> priv->stats.Slide_Beacon_Total += pprevious_stats->RxPWDBAll;
> priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index] = pprevious_stats->RxPWDBAll;
> - //DbgPrint("slide_beacon_adc_pwdb_index = %d, pPreviousRfd->Status.RxPWDBAll = %d\n", slide_beacon_adc_pwdb_index, pPreviousRfd->Status.RxPWDBAll);
> slide_beacon_adc_pwdb_index++;
> if(slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX)
> slide_beacon_adc_pwdb_index = 0;
> @@ -4839,7 +4822,6 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
> if(priv->undecorated_smoothed_pwdb < 0) // initialize
> {
> priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
> - //DbgPrint("First pwdb initialize \n");
> }
> #if 1
> if(pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb)
> @@ -5094,7 +5076,6 @@ static void rtl8192_query_rxphystatus(
> cck_adc_pwdb[i] = (char)tmp_pwdb;
> cck_adc_pwdb[i] /= 2;
> pstats->cck_adc_pwdb[i] = precord_stats->cck_adc_pwdb[i] = cck_adc_pwdb[i];
> - //DbgPrint("RF-%d tmp_pwdb = 0x%x, cck_adc_pwdb = %d", i, tmp_pwdb, cck_adc_pwdb[i]);
> }
> }
> #endif
> @@ -5323,13 +5304,11 @@ static void TranslateRxSignalStuff819xpci(struct net_device *dev,
> if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
> {
> bPacketBeacon = true;
> - //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
> }
> if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
> {
> if((!compare_ether_addr(praddr,dev->dev_addr)))
> bToSelfBA = true;
> - //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
> }
>
> #endif
> @@ -6103,7 +6082,6 @@ void setKey( struct net_device *dev,
>
> write_nic_dword(dev, WCAMI, TargetContent);
> write_nic_dword(dev, RWCAM, TargetCommand);
> - // printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
> }
> else if(i==1){//MAC
> TargetContent = (u32)(*(MacAddr+2)) |
> @@ -6147,7 +6125,6 @@ bool NicIFEnableNIC(struct net_device* dev)
> priv->bdisable_nic = false; //YJ,add,091111
> return -1;
> }
> - //printk("start adapter finished\n");
> RT_CLEAR_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC);
> //priv->bfirst_init = false;
>
> diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c
> index 08275b3..55bdaeb 100644
> --- a/drivers/staging/rtl8192e/r8192E_dm.c
> +++ b/drivers/staging/rtl8192e/r8192E_dm.c
> @@ -406,20 +406,16 @@ static void dm_check_rate_adaptive(struct net_device * dev)
> (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
> }
>
> - //DbgPrint("[DM] Thresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);
> if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA)
> {
> - //DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);
> pra->ratr_state = DM_RATR_STA_HIGH;
> targetRATR = pra->upper_rssi_threshold_ratr;
> }else if(priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA)
> {
> - //DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);
> pra->ratr_state = DM_RATR_STA_MIDDLE;
> targetRATR = pra->middle_rssi_threshold_ratr;
> }else
> {
> - //DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);
> pra->ratr_state = DM_RATR_STA_LOW;
> targetRATR = pra->low_rssi_threshold_ratr;
> }
> @@ -433,17 +429,13 @@ static void dm_check_rate_adaptive(struct net_device * dev)
> if( (priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
> ping_rssi_state )
> {
> - //DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);
> pra->ratr_state = DM_RATR_STA_LOW;
> targetRATR = pra->ping_rssi_ratr;
> ping_rssi_state = 1;
> }
> - //else
> - // DbgPrint("TestRSSI is between the range. \n");
> }
> else
> {
> - //DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR);
> ping_rssi_state = 0;
> }
> }
> @@ -616,7 +608,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
> cmpk_message_handle_tx(dev, (u8*)&tx_cmd, DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
> #endif
> mdelay(1);
> - //DbgPrint("hi, vivi, strange\n");
> +
> for(i = 0;i <= 30; i++)
> {
> Pwr_Flag = read_nic_byte(dev, Pw_Track_Flag);
> @@ -910,9 +902,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
> tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
> tmpCCK40Mindex = 0;
> }
> - //DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
> - //((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
> - //tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
> +
> if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) //40M
> tmpCCKindex = tmpCCK40Mindex;
> else
> @@ -943,7 +933,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
>
> if(CCKSwingNeedUpdate)
> {
> - //DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);
> dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> }
> if(priv->OFDM_index != tmpOFDMindex)
> @@ -1143,7 +1132,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> struct r8192_priv *priv = ieee80211_priv(dev);
> static u8 TM_Trigger=0;
>
> - //DbgPrint("dm_CheckTXPowerTracking() \n");
> if(!priv->btxpower_tracking)
> return;
> else
> @@ -1159,7 +1147,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> {
> //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
> //actually write reg0x02 bit1=0, then bit1=1.
> - //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
> @@ -1168,8 +1155,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> return;
> }
> else {
> - //DbgPrint("Schedule TxPowerTrackingWorkItem\n");
> - queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
> + queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
> TM_Trigger = 0;
> }
> }
> @@ -1373,10 +1359,7 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev)
> if(priv->rf_type == RF_1T2R) // 1T2R, Spatial Stream 2 should be disabled
> {
> ratr_value &=~ (RATE_ALL_OFDM_2SS);
> - //DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);
> }
> - //DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);
> - //cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);
> write_nic_dword(dev, RATR0, ratr_value);
> write_nic_byte(dev, UFWP, 1);
> }
> @@ -1591,7 +1574,6 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
> if (dm_digtable.dig_enable_flag == false)
> return;
>
> - //DbgPrint("Dig by Sw Rssi \n");
> if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig.
> fw_dig = 0;
> if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled
> @@ -1607,12 +1589,9 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
> else
> dm_digtable.cur_connect_state = DIG_DISCONNECT;
>
> - //DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n",
> - //DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
> -
> if(dm_digtable.dbg_mode == DM_DBG_OFF)
> dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
> - //DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);
> +
> dm_initial_gain(dev);
> dm_pd_th(dev);
> dm_cs_ratio(dev);
> @@ -1650,11 +1629,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> {
> return;
> }
> - //DbgPrint("Dig by Fw False Alarm\n");
> - //if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)
> - /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
> - pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
> - DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
> +
> /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
> and then execute below step. */
> if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
> @@ -1736,7 +1711,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> }
>
> dm_digtable.dig_state = DM_STA_DIG_ON;
> - //DbgPrint("DIG ON\n\r");
>
> // 2.1 Set initial gain.
> // 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
> @@ -1906,7 +1880,6 @@ static void dm_initial_gain(
> dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
> dm_digtable.pre_ig_value = 0;
> }
> - //DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);
>
> // if silent reset happened, we should rewrite the values back
> if(priv->reset_count != reset_cnt)
> @@ -1923,7 +1896,6 @@ static void dm_initial_gain(
> || !initialized || force_write)
> {
> initial_gain = (u8)dm_digtable.cur_ig_value;
> - //DbgPrint("Write initial gain = 0x%x\n", initial_gain);
> // Set initial gain.
> write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
> write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
> @@ -1984,7 +1956,6 @@ static void dm_pd_th(
> if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
> (initialized<=3) || force_write)
> {
> - //DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);
> if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER)
> {
> // Lower PD_TH for OFDM.
> @@ -2093,7 +2064,6 @@ static void dm_cs_ratio(
> if((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
> !initialized || force_write)
> {
> - //DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);
> if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
> {
> // Lower CS ratio for CCK.
> @@ -2145,7 +2115,6 @@ static void dm_check_edca_turbo(
> if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
> goto dm_CheckEdcaTurbo_EXIT;
>
> -// printk("========>%s():bis_any_nonbepkts is %d\n",__FUNCTION__,priv->bis_any_nonbepkts);
> // Check the status for current condition.
> if(!priv->ieee80211->bis_any_nonbepkts)
> {
> @@ -2154,7 +2123,6 @@ static void dm_check_edca_turbo(
> // For RT-AP, we needs to turn it on when Rx>Tx
> if(curRxOkCnt > 4*curTxOkCnt)
> {
> - //printk("%s():curRxOkCnt > 4*curTxOkCnt\n");
> if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
> {
> write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
> @@ -2163,8 +2131,6 @@ static void dm_check_edca_turbo(
> }
> else
> {
> -
> - //printk("%s():curRxOkCnt < 4*curTxOkCnt\n");
> if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
> {
> write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
> @@ -2269,7 +2235,6 @@ static void dm_ctstoself(struct net_device *dev)
> if(curRxOkCnt > 4*curTxOkCnt) //downlink, disable CTS to self
> {
> pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
> - //DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");
> }
> else //uplink
> {
> @@ -2279,12 +2244,10 @@ static void dm_ctstoself(struct net_device *dev)
> if(priv->undecorated_smoothed_pwdb < priv->ieee80211->CTSToSelfTH) // disable CTS to self
> {
> pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
> - //DbgPrint("dm_CTSToSelf() ==> CTS to self disabled\n");
> }
> else if(priv->undecorated_smoothed_pwdb >= (priv->ieee80211->CTSToSelfTH+5)) // enable CTS to self
> {
> pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
> - //DbgPrint("dm_CTSToSelf() ==> CTS to self enabled\n");
> }
> #endif
> }
> @@ -2467,7 +2430,6 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
> if(priv->ieee80211->mode == WIRELESS_MODE_B)
> {
> DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; //pure B mode, fixed cck version2
> - //DbgPrint("Pure B mode, use cck rx version2 \n");
> }
>
> //decide max/sec/min rssi index
> @@ -2689,7 +2651,6 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
> if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
> {
> //enable the BB Rx path
> - //DbgPrint("RF-%d is enabled. \n", 0x1<<i);
> rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); // 0xc04[3:0]
> rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); // 0xd04[3:0]
> DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
> @@ -3053,12 +3014,6 @@ void dm_check_fsync(struct net_device *dev)
> #endif
>
> reg_c38_State = RegC38_NonFsync_Other_AP;
> - #if 0//cosa
> - if (Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
> - DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x10);
> - else
> - DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x90);
> - #endif
> }
> }
> else if(priv->undecorated_smoothed_pwdb >= (RegC38_TH+5))
> @@ -3067,7 +3022,6 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);
> }
> }
> }
> @@ -3077,7 +3031,6 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x \n", pHalData->framesync);
> }
> }
> }
> @@ -3089,7 +3042,6 @@ void dm_check_fsync(struct net_device *dev)
> write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
> reg_c38_State = RegC38_Default;
> reset_cnt = priv->reset_count;
> - //DbgPrint("reg_c38_State = 0 for silent reset. \n");
> }
> }
> else
> @@ -3098,7 +3050,6 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("framesync no monitor, write 0xc38 = 0x%x \n", pHalData->framesync);
> }
> }
> }
> @@ -3130,7 +3081,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
> priv->bDynamicTxLowPower = false;
> return;
> }
> - //printk("priv->ieee80211->current_network.unknown_cap_exist is %d ,priv->ieee80211->current_network.broadcom_cap_exist is %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);
> if((priv->ieee80211->current_network.atheros_cap_exist ) && (priv->ieee80211->mode == IEEE_G)){
> txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
> txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
> @@ -3141,8 +3091,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
> txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
> }
>
> -// printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold is %d\n",__FUNCTION__,txhipower_threshhold,txlowpower_threshold);
> -
> RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" , priv->undecorated_smoothed_pwdb);
>
> if(priv->ieee80211->state == IEEE80211_LINKED)
> --
> 1.7.0.4
>
>
> _______________________________________________
> devel mailing list
> devel at linuxdriverproject.org
> http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
>
--
Regards,
Denis
More information about the devel
mailing list