[PATCH 10/18] rtl8192e: Remove unused members from r8192_priv

[Mike McCormack]

Signed-off-by: Mike McCormack <mikem at ring3k.org>
---
 drivers/staging/rtl8192e/r8192E.h      |   16 ----------------
 drivers/staging/rtl8192e/r8192E_core.c |   10 ----------
 drivers/staging/rtl8192e/r8192E_wx.c   |    2 --
 3 files changed, 0 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/rtl8192e/r8192E.h b/drivers/staging/rtl8192e/r8192E.h
index 2fa25ad..064ae0c 100644
--- a/drivers/staging/rtl8192e/r8192E.h
+++ b/drivers/staging/rtl8192e/r8192E.h
@@ -966,7 +966,6 @@ typedef struct r8192_priv
 	u16  eeprom_ChannelPlan;
 	RT_CUSTOMER_ID CustomerID;
 	LED_STRATEGY_8190	LedStrategy;
-	//bool bDcut;
 	u8	IC_Cut;
 	int irq;
 	short irq_enabled;
@@ -980,12 +979,6 @@ typedef struct r8192_priv
 	u8 Rf_Mode;
 	short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
 	u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
-//	short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
-	short enable_gpio0;
-	enum card_type {PCI,MINIPCI,CARDBUS,USB/*rtl8187*/}card_type;
-	short hw_plcp_len;
-	short plcp_preamble_mode;
-	u8 ScanDelay;
 	spinlock_t irq_th_lock;
 	spinlock_t tx_lock;
 	spinlock_t rf_ps_lock;
@@ -997,8 +990,6 @@ typedef struct r8192_priv
 //	struct net_device *dev; //comment this out.
 	short chan;
 	short sens;
-	short max_sens;
-	u32 rx_prevlen;
 /*RX stuff*/
         rx_desc_819x_pci *rx_ring;
         dma_addr_t rx_ring_dma;
@@ -1024,13 +1015,6 @@ typedef struct r8192_priv
 	struct tasklet_struct irq_rx_tasklet;
 	struct tasklet_struct irq_tx_tasklet;
         struct tasklet_struct irq_prepare_beacon_tasklet;
-	/* adhoc/master mode stuff */
-	ptx_ring txbeaconringtail;
-	dma_addr_t txbeaconringdma;
-	ptx_ring txbeaconring;
-	int txbeaconcount;
-	struct buffer *txbeaconbufs;
-	struct buffer *txbeaconbufstail;
 	//	u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
 //	u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
 //	u8 cck_txpwr_base;
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index cf5d828..441b50b 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -2151,8 +2151,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 
 	priv->being_init_adapter = false;
 	priv->txringcount = 64;//32;
-	//priv->txbeaconcount = priv->txringcount;
-	priv->txbeaconcount = 2;
 	priv->rxbuffersize = 9100;//2048;//1024;
 	priv->rxringcount = MAX_RX_COUNT;//64;
 	priv->irq_enabled=0;
@@ -2180,7 +2178,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->rfa_txpowertrackingindex = 0;
 	priv->rfc_txpowertrackingindex = 0;
 	priv->CckPwEnl = 6;
-	priv->ScanDelay = 50;//for Scan TODO
 	//added by amy for silent reset
 	priv->ResetProgress = RESET_TYPE_NORESET;
 	priv->bForcedSilentReset = 0;
@@ -2257,13 +2254,11 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->ieee80211->SetHwRegHandler = rtl8192e_SetHwReg;
 	priv->ieee80211->rtllib_ap_sec_type = rtl8192e_ap_sec_type;
 
-	priv->card_type = USB;
 	{
 		priv->ShortRetryLimit = 0x30;
 		priv->LongRetryLimit = 0x30;
 	}
 	priv->EarlyRxThreshold = 7;
-	priv->enable_gpio0 = 0;
 
 	priv->TransmitConfig = 0;
 
@@ -2773,7 +2768,6 @@ static void rtl8192_read_eeprom_info(struct net_device* dev)
 				priv->ChannelPlan);
 			break;
 		case EEPROM_CID_Nettronix:
-			priv->ScanDelay = 100;	//cosa add for scan
 			priv->CustomerID = RT_CID_Nettronix;
 			break;
 		case EEPROM_CID_Pronet:
@@ -6041,10 +6035,6 @@ static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev)
 
 		}
 
-
-
-	//	free_beacon_desc_ring(dev,priv->txbeaconcount);
-
 #ifdef CONFIG_RTL8180_IO_MAP
 
 		if( dev->base_addr != 0 ){
diff --git a/drivers/staging/rtl8192e/r8192E_wx.c b/drivers/staging/rtl8192e/r8192E_wx.c
index 5ae6516..15b0801 100644
--- a/drivers/staging/rtl8192e/r8192E_wx.c
+++ b/drivers/staging/rtl8192e/r8192E_wx.c
@@ -301,8 +301,6 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 //	range->old_num_channels;
 //	range->old_num_frequency;
 //	range->old_freq[6]; /* Filler to keep "version" at the same offset */
-	if(priv->rf_set_sens != NULL)
-		range->sensitivity = priv->max_sens;	/* signal level threshold range */
 
 	range->max_qual.qual = 100;
 	/* TODO: Find real max RSSI and stick here */
-- 
1.7.0.4