[PATCH 183/510] staging: Fix typos in rt2860
Greg Kroah-Hartman
gregkh at suse.de
Mon Jan 10 20:38:27 UTC 2011
From: Justin P. Mattock <justinmattock at gmail.com>
Here is a patch that fixes some typos, and comments in drivers/staging/rt2860
Signed-off-by: Justin P. Mattock <justinmattock at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/staging/rt2860/chip/mac_pci.h | 7 ++-
drivers/staging/rt2860/chip/mac_usb.h | 5 +-
drivers/staging/rt2860/chip/rtmp_mac.h | 19 +++++----
drivers/staging/rt2860/chips/rt3090.c | 5 +-
drivers/staging/rt2860/chips/rt30xx.c | 9 ++--
drivers/staging/rt2860/mlme.h | 41 ++++++++++---------
drivers/staging/rt2860/oid.h | 13 +++---
drivers/staging/rt2860/pci_main_dev.c | 17 ++++----
drivers/staging/rt2860/rt_linux.c | 12 +++---
drivers/staging/rt2860/rt_linux.h | 5 +-
drivers/staging/rt2860/rt_main_dev.c | 9 ++--
drivers/staging/rt2860/rt_pci_rbus.c | 7 ++-
drivers/staging/rt2860/rt_usb.c | 13 +++---
drivers/staging/rt2860/rtmp.h | 69 ++++++++++++++++----------------
drivers/staging/rt2860/rtmp_def.h | 37 +++++++++--------
drivers/staging/rt2860/rtmp_timer.h | 13 +++---
drivers/staging/rt2860/spectrum.h | 12 +++---
drivers/staging/rt2860/sta/assoc.c | 13 +++---
drivers/staging/rt2860/sta/auth.c | 7 ++-
drivers/staging/rt2860/sta/connect.c | 35 ++++++++--------
drivers/staging/rt2860/sta/rtmp_data.c | 33 ++++++++-------
drivers/staging/rt2860/sta/sanity.c | 5 +-
drivers/staging/rt2860/sta/sync.c | 19 +++++----
drivers/staging/rt2860/sta/wpa.c | 5 +-
drivers/staging/rt2860/sta_ioctl.c | 25 ++++++------
drivers/staging/rt2860/usb_main_dev.c | 8 ++--
drivers/staging/rt2860/wpa.h | 5 +-
27 files changed, 236 insertions(+), 212 deletions(-)
diff --git a/drivers/staging/rt2860/chip/mac_pci.h b/drivers/staging/rt2860/chip/mac_pci.h
index 9f25ef0..b8868a5 100644
--- a/drivers/staging/rt2860/chip/mac_pci.h
+++ b/drivers/staging/rt2860/chip/mac_pci.h
@@ -30,7 +30,8 @@
Abstract:
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix some typos
--------- ---------- ----------------------------------------------
*/
@@ -45,7 +46,7 @@
/* */
/* Device ID & Vendor ID related definitions, */
-/* NOTE: you should not add the new VendorID/DeviceID here unless you not sure it belongs to what chip. */
+/* NOTE: you should not add the new VendorID/DeviceID here unless you know for sure what chip it belongs too. */
/* */
#define NIC_PCI_VENDOR_ID 0x1814
#define PCIBUS_INTEL_VENDOR 0x8086
@@ -83,7 +84,7 @@ struct PACKED rt_txd {
u32 SDPtr1;
/*Word3 */
u32 rsv2:24;
- u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */
+ u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correct position */
u32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */
u32 rsv:2;
u32 TCO:1; /* */
diff --git a/drivers/staging/rt2860/chip/mac_usb.h b/drivers/staging/rt2860/chip/mac_usb.h
index ed0c0b4..e8158fb 100644
--- a/drivers/staging/rt2860/chip/mac_usb.h
+++ b/drivers/staging/rt2860/chip/mac_usb.h
@@ -30,7 +30,8 @@
Abstract:
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix a typo
--------- ---------- ----------------------------------------------
*/
@@ -93,7 +94,7 @@ struct rt_txinfo {
/* Word 0 */
u32 USBDMATxPktLen:16; /*used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame. */
u32 rsv:8;
- u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */
+ u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correct position */
u32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */
u32 SwUseLastRound:1; /* Software use. */
u32 rsv2:2; /* Software use. */
diff --git a/drivers/staging/rt2860/chip/rtmp_mac.h b/drivers/staging/rt2860/chip/rtmp_mac.h
index e8f7172..3d1e491 100644
--- a/drivers/staging/rt2860/chip/rtmp_mac.h
+++ b/drivers/staging/rt2860/chip/rtmp_mac.h
@@ -32,6 +32,7 @@
Revision History:
Who When What
+ Justin P. Mattock 11/07/2010 Fix a comments, and typos
-------- ---------- ----------------------------------------------
*/
@@ -43,7 +44,7 @@
/* ================================================================================= */
/* the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. */
-/* MAC block use this TXINFO to control the transmission behavior of this frame. */
+/* MAC block uses this TXINFO to control the transmission behavior of this frame. */
#define FIFO_MGMT 0
#define FIFO_HCCA 1
#define FIFO_EDCA 2
@@ -458,8 +459,8 @@ typedef union _BBP_CSR_CFG_STRUC {
/* */
typedef union _RF_CSR_CFG0_STRUC {
struct {
- u32 RegIdAndContent:24; /* Register value to program into BBP */
- u32 bitwidth:5; /* Selected BBP register */
+ u32 RegIdAndContent:24; /* Register value to program into BBP */
+ u32 bitwidth:5; /* Selected BBP register */
u32 StandbyMode:1; /* 0: high when stand by 1: low when standby */
u32 Sel:1; /* 0:RF_LE0 activate 1:RF_LE1 activate */
u32 Busy:1; /* 0: idle 1: 8busy */
@@ -469,7 +470,7 @@ typedef union _RF_CSR_CFG0_STRUC {
#define RF_CSR_CFG1 0x1024
typedef union _RF_CSR_CFG1_STRUC {
struct {
- u32 RegIdAndContent:24; /* Register value to program into BBP */
+ u32 RegIdAndContent:24; /* Register value to program into BBP */
u32 RFGap:5; /* Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) */
u32 rsv:7; /* 0: idle 1: 8busy */
} field;
@@ -478,7 +479,7 @@ typedef union _RF_CSR_CFG1_STRUC {
#define RF_CSR_CFG2 0x1028 /* */
typedef union _RF_CSR_CFG2_STRUC {
struct {
- u32 RegIdAndContent:24; /* Register value to program into BBP */
+ u32 RegIdAndContent:24; /* Register value to program into BBP */
u32 rsv:8; /* 0: idle 1: 8busy */
} field;
u32 word;
@@ -490,7 +491,7 @@ typedef union _LED_CFG_STRUC {
u32 OffPeriod:8; /* blinking off period unit 1ms */
u32 SlowBlinkPeriod:6; /* slow blinking period. unit:1ms */
u32 rsv:2;
- u32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */
+ u32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */
u32 GLedMode:2; /* green Led Mode */
u32 YLedMode:2; /* yellow Led Mode */
u32 LedPolar:1; /* Led Polarity. 0: active low1: active high */
@@ -621,9 +622,9 @@ typedef union _TX_TIMEOUT_CFG_STRUC {
#define TX_RTY_CFG 0x134c
typedef union PACKED _TX_RTY_CFG_STRUC {
struct {
- u32 ShortRtyLimit:8; /* short retry limit */
- u32 LongRtyLimit:8; /*long retry limit */
- u32 LongRtyThre:12; /* Long retry threshoold */
+ u32 ShortRtyLimit:8; /* short retry limit */
+ u32 LongRtyLimit:8; /* long retry limit */
+ u32 LongRtyThre:12; /* Long retry threshold */
u32 NonAggRtyMode:1; /* Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */
u32 AggRtyMode:1; /* Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */
u32 TxautoFBEnable:1; /* Tx retry PHY rate auto fallback enable */
diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c
index c2933c6..156eb36 100644
--- a/drivers/staging/rt2860/chips/rt3090.c
+++ b/drivers/staging/rt2860/chips/rt3090.c
@@ -28,10 +28,11 @@
rt3090.c
Abstract:
- Specific funcitons and variables for RT3070
+ Specific functions and variables for RT3070
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix a typo
-------- ---------- ----------------------------------------------
*/
diff --git a/drivers/staging/rt2860/chips/rt30xx.c b/drivers/staging/rt2860/chips/rt30xx.c
index 4367a19..c8f7282 100644
--- a/drivers/staging/rt2860/chips/rt30xx.c
+++ b/drivers/staging/rt2860/chips/rt30xx.c
@@ -28,10 +28,11 @@
rt30xx.c
Abstract:
- Specific funcitons and variables for RT30xx.
+ Specific functions and variables for RT30xx.
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix some typos
-------- ---------- ----------------------------------------------
*/
@@ -89,7 +90,7 @@ struct rt_reg_pair RT30xx_RFRegTable[] = {
u8 NUM_RF_REG_PARMS = (sizeof(RT30xx_RFRegTable) / sizeof(struct rt_reg_pair));
-/* Antenna divesity use GPIO3 and EESK pin for control */
+/* Antenna diversity use GPIO3 and EESK pin for control */
/* Antenna and EEPROM access are both using EESK pin, */
/* Therefor we should avoid accessing EESK at the same time */
/* Then restore antenna after EEPROM access */
@@ -243,7 +244,7 @@ void RTMPFilterCalibration(struct rt_rtmp_adapter *pAd)
break;
}
- /* prevent infinite loop cause driver hang. */
+ /* prevent infinite loop; causes driver hang. */
if (loopcnt++ > 100) {
DBGPRINT(RT_DEBUG_ERROR,
("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating",
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index 01414c3..cd1ee3d 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -32,8 +32,9 @@
Revision History:
Who When What
-------- ---------- ------------------------------
- John Chang 2003-08-28 Created
- John Chang 2004-09-06 modified for RT2600
+ John Chang 2003-08-28 Created
+ John Chang 2004-09-06 modified for RT2600
+ Justin P. Mattock 11/07/2010 Fix typos in comments
*/
#ifndef __MLME_H__
@@ -41,7 +42,7 @@
#include "rtmp_dot11.h"
-/* maximum supported capability information - */
+/* maximum supported capability information */
/* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */
#define SUPPORTED_CAPABILITY_INFO 0x0533
@@ -77,7 +78,7 @@
#define CW_MAX_IN_BITS 10 /* actual CwMax = 2^CW_MAX_IN_BITS - 1 */
/* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */
-/* SHould not refer to this constant anymore */
+/* Should not refer to this constant anymore */
/*#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm */
#define RSSI_FOR_MID_TX_POWER -55 /* -55 db is considered mid-distance */
#define RSSI_FOR_LOW_TX_POWER -45 /* -45 db is considered very short distance and */
@@ -123,7 +124,7 @@
#define TID_MAC_HASH_INDEX(Addr, TID) (TID_MAC_HASH(Addr, TID) % HASH_TABLE_SIZE)
/* LED Control */
-/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */
+/* association ON. one LED ON. another blinking when TX, OFF when idle */
/* no association, both LED off */
#define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
#define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
@@ -284,8 +285,8 @@ struct PACKED rt_ht_capability_ie {
/* 802.11n draft3 related structure definitions. */
/* 7.3.2.60 */
-#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */
-#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */
+#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continuously scans each channel when performing an active OBSS scan. */
+#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continuously scans each channel when performing an passive OBSS scan. */
#define dot11BSSWidthTriggerScanInterval 300 /* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */
#define dot11OBSSScanPassiveTotalPerChannel 200 /* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */
#define dot11OBSSScanActiveTotalPerChannel 20 /*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */
@@ -325,7 +326,7 @@ struct rt_trigger_eventa {
};
/* 20/40 trigger event table */
-/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */
+/* If one Event (A) is deleted or created, or if Event (B) is detected or not detected, STA should send 2040BSSCoexistence to AP. */
#define MAX_TRIGGER_EVENT 64
struct rt_trigger_event_tab {
u8 EventANo;
@@ -357,14 +358,14 @@ struct PACKED rt_bss_2040_intolerant_ch_report {
u8 ChList[0];
};
-/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
+/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */
struct PACKED rt_cha_switch_announce_ie {
u8 SwitchMode; /*channel switch mode */
u8 NewChannel; /* */
u8 SwitchCount; /* */
};
-/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
+/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */
struct PACKED rt_sec_cha_offset_ie {
u8 SecondaryChannelOffset; /* 1: Secondary above, 3: Secondary below, 0: no Secondary */
};
@@ -377,7 +378,7 @@ struct rt_ht_phy_info {
u8 MCSSet[16];
};
-/*This structure substracts ralink supports from all 802.11n-related features. */
+/*This structure subtracts ralink supports from all 802.11n-related features. */
/*Features not listed here but contained in 802.11n spec are not supported in rt2860. */
struct rt_ht_capability {
u16 ChannelWidth:1;
@@ -387,14 +388,14 @@ struct rt_ht_capability {
u16 ShortGIfor40:1; /*for40MHz */
u16 TxSTBC:1;
u16 RxSTBC:2; /* 2 bits */
- u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */
+ u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benefit of 802.11n */
u16 AmsduSize:1; /* Max receiving A-MSDU size */
u16 rsv:5;
/*Substract from Addiont HT INFO IE */
u8 MaxRAmpduFactor:2;
u8 MpduDensity:3;
- u8 ExtChanOffset:2; /* Please not the difference with following u8 NewExtChannelOffset; from 802.11n */
+ u8 ExtChanOffset:2; /* Please note the difference with following u8 NewExtChannelOffset; from 802.11n */
u8 RecomWidth:1;
u16 OperaionMode:2;
@@ -481,7 +482,7 @@ struct PACKED rt_ba_parm {
u16 AMSDUSupported:1; /* 0: not permitted 1: permitted */
u16 BAPolicy:1; /* 1: immediately BA 0:delayed BA */
u16 TID:4; /* value of TC os TS */
- u16 BufSize:10; /* number of buffe of size 2304 octetsr */
+ u16 BufSize:10; /* number of buffer of size 2304 octetsr */
};
/* 2-byte BA Starting Seq CONTROL field */
@@ -551,7 +552,7 @@ struct PACKED rt_frame_mtba_req {
BASEQ_CONTROL BAStartingSeq;
};
-/* Compressed format is mandantory in HT STA */
+/* Compressed format is mandatory in HT STA */
struct PACKED rt_frame_mtba {
struct rt_frame_control FC;
u16 Duration;
@@ -647,7 +648,7 @@ struct PACKED rt_frame_ba {
u8 bitmask[8];
};
-/* Radio Measuement Request Frame Format */
+/* Radio Measurement Request Frame Format */
struct PACKED rt_frame_rm_req_action {
struct rt_header_802_11 Hdr;
u8 Category;
@@ -709,7 +710,7 @@ struct rt_edca_parm {
u8 Cwmin[4];
u8 Cwmax[4];
u16 Txop[4]; /* in unit of 32-us */
- BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandattory */
+ BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandatory */
};
/* QBSS LOAD information from QAP's BEACON/ProbeRsp */
@@ -757,7 +758,7 @@ struct rt_wpa_ie {
struct rt_bss_entry {
u8 Bssid[MAC_ADDR_LEN];
u8 Channel;
- u8 CentralChannel; /*Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. */
+ u8 CentralChannel; /*Store the wide-band central channel for 40MHz. used in 40MHz AP. Or this is the same as Channel. */
u8 BssType;
u16 AtimWin;
u16 BeaconPeriod;
@@ -855,7 +856,7 @@ struct rt_state_machine {
STATE_MACHINE_FUNC *TransFunc;
};
-/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */
+/* MLME AUX data structure that holds temporarliy settings during a connection attempt. */
/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */
/* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */
/* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */
@@ -996,7 +997,7 @@ struct PACKED rt_rtmp_tx_rate_switch {
#define MAC_TABLE_ASSOC_TIMEOUT 5 /* unit: sec */
#define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE)
-/* AP shall drop the sta if contine Tx fail count reach it. */
+/* AP shall drop the sta if continue Tx fail count reach it. */
#define MAC_ENTRY_LIFE_CHECK_CNT 20 /* packet cnt. */
/* Value domain of pMacEntry->Sst */
diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h
index 1704c27..eaa3fe0 100644
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- Name Date Modification logs
+ Name Date Modification logs
+ Justin P. Mattock 11/07/2010 Fix typos in comments
*/
#ifndef _OID_H_
#define _OID_H_
@@ -78,7 +79,7 @@
#define NDIS_802_11_LENGTH_RATES 8
#define NDIS_802_11_LENGTH_RATES_EX 16
#define MAC_ADDR_LENGTH 6
-/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc */
+/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12 at UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
#define MAX_NUM_OF_CHS 54 /* 14 channels @2.4G + 12 at UNII(lower/middle) + 16 at HiperLAN2 + 11 at UNII(upper) + 0 @Japan + 1 as NULL termination */
#define MAX_NUMBER_OF_EVENT 10 /* entry # in EVENT table */
#define MAX_NUMBER_OF_MAC 32 /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
@@ -610,7 +611,7 @@ struct rt_802_11_event_log {
struct rt_802_11_event_table {
unsigned long Num;
- unsigned long Rsv; /* to align Log[] at LARGE_INEGER boundary */
+ unsigned long Rsv; /* to align Log[] at LARGE_INTEGER boundary */
struct rt_802_11_event_log Log[MAX_NUMBER_OF_EVENT];
};
@@ -721,9 +722,9 @@ struct rt_802_11_tx_rates {
#define AUTH_FAIL 0x4 /* Open authentication fail */
#define AUTH_FAIL_KEYS 0x5 /* Shared authentication fail */
#define ASSOC_FAIL 0x6 /* Association failed */
-#define EAP_MIC_FAILURE 0x7 /* Deauthencation because MIC failure */
-#define EAP_4WAY_TIMEOUT 0x8 /* Deauthencation on 4-way handshake timeout */
-#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthencation on group key handshake timeout */
+#define EAP_MIC_FAILURE 0x7 /* Deauthentication because MIC failure */
+#define EAP_4WAY_TIMEOUT 0x8 /* Deauthentication on 4-way handshake timeout */
+#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthentication on group key handshake timeout */
#define EAP_SUCCESS 0xa /* EAP succeed */
#define DETECT_RADAR_SIGNAL 0xb /* Radar signal occur in current channel */
#define EXTRA_INFO_MAX 0xb /* Indicate Last OID */
diff --git a/drivers/staging/rt2860/pci_main_dev.c b/drivers/staging/rt2860/pci_main_dev.c
index 321facd..c35c804 100644
--- a/drivers/staging/rt2860/pci_main_dev.c
+++ b/drivers/staging/rt2860/pci_main_dev.c
@@ -31,7 +31,8 @@
Create and register network interface for PCI based chipsets in Linux platform.
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix typos in some comments
-------- ---------- ----------------------------------------------
*/
@@ -40,8 +41,8 @@
#include <linux/slab.h>
/* Following information will be show when you run 'modinfo' */
-/* *** If you have a solution for the bug in current version of driver, please mail to me. */
-/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */
+/* If you have a solution for a bug in current version of driver, please e-mail me. */
+/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. */
MODULE_AUTHOR("Jett Chen <jett_chen at ralinktech.com>");
MODULE_DESCRIPTION("RT2860/RT3090 Wireless Lan Linux Driver");
MODULE_LICENSE("GPL");
@@ -599,7 +600,7 @@ void RTMPInitPCIeLinkCtrlValue(struct rt_rtmp_adapter *pAd)
DBGPRINT_RAW(RT_DEBUG_ERROR,
(" AUX_CTRL = 0x%32x\n", MacValue));
- /* for RT30xx F and after, PCIe infterface, and for power solution 3 */
+ /* for RT30xx F and after, PCIe interface, and for power solution 3 */
if ((IS_VERSION_AFTER_F(pAd))
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode >= 2)
&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode <= 3)) {
@@ -902,7 +903,7 @@ void RTMPPCIeLinkCtrlValueRestore(struct rt_rtmp_adapter *pAd, u8 Level)
Configuration);
if ((Configuration != 0) && (Configuration != 0xFFFF)) {
Configuration &= 0xfefc;
- /* If call from interface down, restore to orginial setting. */
+ /* If call from interface down, restore to original setting. */
if (Level == RESTORE_CLOSE)
Configuration |= pAd->HostLnkCtrlConfiguration;
else
@@ -924,7 +925,7 @@ void RTMPPCIeLinkCtrlValueRestore(struct rt_rtmp_adapter *pAd, u8 Level)
Configuration);
if ((Configuration != 0) && (Configuration != 0xFFFF)) {
Configuration &= 0xfefc;
- /* If call from interface down, restore to orginial setting. */
+ /* If call from interface down, restore to original setting. */
if (Level == RESTORE_CLOSE)
Configuration |= pAd->RLnkCtrlConfiguration;
else
@@ -1106,12 +1107,12 @@ void RTMPrt3xSetPCIePowerLinkCtrl(struct rt_rtmp_adapter *pAd)
if (pos != 0)
pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
- /* If configurared to turn on L1. */
+ /* If configured to turn on L1. */
HostConfiguration = 0;
if (pAd->StaCfg.PSControl.field.rt30xxForceASPMTest == 1) {
DBGPRINT(RT_DEBUG_TRACE, ("Enter,PSM : Force ASPM\n"));
- /* Skip non-exist deice right away */
+ /* Skip non-exist device right away */
if ((pAd->HostLnkCtrlOffset != 0)) {
PCI_REG_READ_WORD(pObj->parent_pci_dev,
pAd->HostLnkCtrlOffset,
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index abfeea1..e680b0d 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -767,13 +767,13 @@ void send_monitor_packets(struct rt_rtmp_adapter *pAd, struct rt_rx_blk *pRxBlk)
/* QOS */
if (pRxBlk->pHeader->FC.SubType & 0x08) {
header_len += 2;
- /* Data skip QOS contorl field */
+ /* Data skip QOS control field */
pRxBlk->DataSize -= 2;
}
/* Order bit: A-Ralink or HTC+ */
if (pRxBlk->pHeader->FC.Order) {
header_len += 4;
- /* Data skip HTC contorl field */
+ /* Data skip HTC control field */
pRxBlk->DataSize -= 4;
}
/* Copy Header */
@@ -1175,7 +1175,7 @@ int RtmpOSNetDevAddrSet(struct net_device *pNetDev, u8 *pMacAddr)
net_dev = pNetDev;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
- /* work-around for the SuSE due to it has it's own interface name management system. */
+ /* work-around for SuSE, due to them having their own interface name management system. */
{
NdisZeroMemory(pAd->StaCfg.dev_name, 16);
NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name,
@@ -1300,7 +1300,7 @@ int RtmpOSNetDevAttach(struct net_device *pNetDev,
int ret, rtnl_locked = FALSE;
DBGPRINT(RT_DEBUG_TRACE, ("RtmpOSNetDevAttach()--->\n"));
- /* If we need hook some callback function to the net device structrue, now do it. */
+ /* If we need hook some callback function to the net device structure, now do it. */
if (pDevOpHook) {
struct rt_rtmp_adapter *pAd = NULL;
@@ -1351,10 +1351,10 @@ struct net_device *RtmpOSNetDevCreate(struct rt_rtmp_adapter *pAd,
return NULL;
}
- /* find a available interface name, max 32 interfaces */
+ /* find an available interface name, max 32 interfaces */
status = RtmpOSNetDevRequestName(pAd, pNetDev, pNamePrefix, devNum);
if (status != NDIS_STATUS_SUCCESS) {
- /* error! no any available ra name can be used! */
+ /* error! no available ra name can be used! */
DBGPRINT(RT_DEBUG_ERROR,
("Assign interface name (%s with suffix 0~32) failed...\n",
pNamePrefix));
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 5acedf1..a449b0b 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -30,7 +30,8 @@
Abstract:
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix typo in a comment
--------- ---------- ----------------------------------------------
*/
@@ -726,7 +727,7 @@ void linux_pci_unmap_single(struct rt_rtmp_adapter *pAd, dma_addr_t dma_addr,
#define RTMP_GET_PACKET_MOREDATA(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
/* */
-/* Sepcific Pakcet Type definition */
+/* Specific Packet Type definition */
/* */
#define RTMP_PACKET_SPECIFIC_CB_OFFSET 11
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index ad60cea..19e9bc6 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -31,7 +31,8 @@
Create and register network interface.
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix typos in comments
-------- ---------- ----------------------------------------------
*/
@@ -234,7 +235,7 @@ int rt28xx_close(struct net_device *dev)
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* RTMP_MAC_PCI // */
- /* If dirver doesn't wake up firmware here, */
+ /* If driver doesn't wake up firmware here, */
/* NICLoadFirmware will hang forever when interface is up again. */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) {
AsicForceWakeup(pAd, TRUE);
@@ -310,8 +311,8 @@ int rt28xx_close(struct net_device *dev)
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
/* Receive packets to clear DMA index after disable interrupt. */
- /*RTMPHandleRxDoneInterrupt(pAd); */
- /* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */
+ /* RTMPHandleRxDoneInterrupt(pAd); */
+ /* put radio off to save power when driver unloads. After radiooff, can't write/read register, so need to finish all. */
/* register access before Radio off. */
brc = RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);
diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c
index 3004be6..e5fb67c 100644
--- a/drivers/staging/rt2860/rt_pci_rbus.c
+++ b/drivers/staging/rt2860/rt_pci_rbus.c
@@ -31,7 +31,8 @@
Create and register network interface.
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix a typo
-------- ---------- ----------------------------------------------
*/
@@ -356,7 +357,7 @@ static void mgmt_dma_done_tasklet(unsigned long data)
RTMPHandleMgmtRingDmaDoneInterrupt(pAd);
- /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any */
+ /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, without any */
/* bug report output */
RTMP_INT_LOCK(&pAd->irq_lock, flags);
/*
@@ -787,7 +788,7 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance)
}
/*
- * invaild or writeback cache
+ * invalid or writeback cache
* and convert virtual address to physical address
*/
dma_addr_t linux_pci_map_single(struct rt_rtmp_adapter *pAd, void *ptr,
diff --git a/drivers/staging/rt2860/rt_usb.c b/drivers/staging/rt2860/rt_usb.c
index bcfc0f5..580a20d 100644
--- a/drivers/staging/rt2860/rt_usb.c
+++ b/drivers/staging/rt2860/rt_usb.c
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- Name Date Modification logs
+ Name Date Modification logs
+ Justin P. Mattock 11/07/2010 Fix some typos.
*/
@@ -279,7 +280,7 @@ static void rtusb_dataout_complete(unsigned long data)
&& !RTUSB_TEST_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_FRAG <<
BulkOutPipeId))) {
- /* Indicate There is data avaliable */
+ /* Indicate There is data available */
RTUSB_SET_BULK_FLAG(pAd,
(fRTUSB_BULK_OUT_DATA_NORMAL <<
BulkOutPipeId));
@@ -335,7 +336,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data)
}
/* Always call Bulk routine, even reset bulk. */
- /* The protectioon of rest bulk should be in BulkOut routine */
+ /* The protection of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -383,7 +384,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data)
RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]);
/* Always call Bulk routine, even reset bulk. */
- /* The protectioon of rest bulk should be in BulkOut routine */
+ /* The protection of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -427,7 +428,7 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data)
RTMP_SEM_UNLOCK(&pAd->BulkOutLock[0]);
/* Always call Bulk routine, even reset bulk. */
- /* The protectioon of rest bulk should be in BulkOut routine */
+ /* The protection of rest bulk should be in BulkOut routine */
RTUSBKickBulkOut(pAd);
}
@@ -575,7 +576,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data)
} else {
/* Always call Bulk routine, even reset bulk. */
- /* The protectioon of rest bulk should be in BulkOut routine */
+ /* The protection of rest bulk should be in BulkOut routine */
if (pAd->MgmtRing.TxSwFreeIdx <
MGMT_RING_SIZE
/* pMLMEContext->bWaitingBulkOut == TRUE */) {
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index ca54e53..caf4662 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -31,11 +31,12 @@
Miniport generic portion header file
Revision History:
- Who When What
+ Who When What
-------- ---------- ----------------------------------------------
- Paul Lin 2002-08-01 created
- James Tan 2002-09-06 modified (Revise NTCRegTable)
- John Chang 2004-09-06 modified for RT2600
+ Paul Lin 2002-08-01 created
+ James Tan 2002-09-06 modified (Revise NTCRegTable)
+ John Chang 2004-09-06 modified for RT2600
+ Justin P. Mattock 11/07/2010 Fix some typos
*/
#ifndef __RTMP_H__
#define __RTMP_H__
@@ -337,7 +338,7 @@ struct rt_rtmp_sg_list {
#define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
#define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
+/* if original Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \
{ \
if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) { \
@@ -466,7 +467,7 @@ struct rt_rtmp_dmabuf {
/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */
/* contiguous physical memory. char stored the binding Rx packet descriptor */
/* which won't be released, driver has to wait until upper layer return the packet */
-/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */
+/* before giving up this rx ring descriptor to ASIC. NDIS_BUFFER is associated pair */
/* to describe the packet buffer. For Tx, char stored the tx packet descriptor */
/* which driver should ACK upper layer when the tx is physically done or failed. */
/* */
@@ -602,7 +603,7 @@ struct rt_counter_ralink {
};
struct rt_counter_drs {
- /* to record the each TX rate's quality. 0 is best, the bigger the worse. */
+ /* record each TX rate's quality. 0 is best, the bigger the worse. */
u16 TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
u8 PER[MAX_STEP_OF_TX_RATE_SWITCH];
u8 TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */
@@ -719,7 +720,7 @@ struct rt_fragment_frame {
/* Packet information for NdisQueryPacket */
/* */
struct rt_packet_info {
- u32 PhysicalBufferCount; /* Physical breaks of buffer descripor chained */
+ u32 PhysicalBufferCount; /* Physical breaks of buffer descriptor chained */
u32 BufferCount; /* Number of Buffer descriptor chained */
u32 TotalPacketLength; /* Self explained */
char *pFirstBuffer; /* Pointer to first buffer descriptor */
@@ -846,8 +847,8 @@ typedef enum _ABGBAND_STATE_ {
/* Power save method control */
typedef union _PS_CONTROL {
struct {
- unsigned long EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */
- unsigned long EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */
+ unsigned long EnablePSinIdle:1; /* Enable radio off when not connected to AP. radio on only when sitesurvey, */
+ unsigned long EnableNewPS:1; /* Enable new Chip power save function . New method can only be applied in chip version after 2872. and PCIe. */
unsigned long rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */
unsigned long rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */
unsigned long rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */
@@ -1117,8 +1118,8 @@ struct rt_beacon_sync {
unsigned long TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
unsigned long CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */
- u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
- u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
+ u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */
+ u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */
};
#endif /* RTMP_MAC_USB // */
@@ -1211,7 +1212,7 @@ struct rt_common_config {
/*BOOLEAN bAutoTxRateSwitch; */
u8 MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */
u8 RtsRate; /* RATE_xxx */
- HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
+ HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operation at Ht rate. */
u8 MlmeRate; /* RATE_xxx, used to send MLME frames */
u8 BasicMlmeRate; /* Default Rate for sending MLME frames */
@@ -1264,7 +1265,7 @@ struct rt_common_config {
struct rt_ht_capability_ie HtCapability;
struct rt_add_ht_info_ie AddHTInfo; /* Useful as AP. */
/*This IE is used with channel switch announcement element when changing to a new 40MHz. */
- /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */
+ /*This IE is included in channel switch announcement frames 7.4.1.5, beacons, probe Rsp. */
struct rt_new_ext_chan_ie NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */
BOOLEAN bHTProtect;
@@ -1329,7 +1330,7 @@ struct rt_sta_admin_config {
/* GROUP 1 - */
/* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
/* the user intended configuration, but not necessary fully equal to the final */
- /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */
+ /* settings in ACTIVE BSS after negotiation/compromise with the BSS holder (either */
/* AP or IBSS holder). */
/* Once initialized, user configuration can only be changed via OID_xxx */
u8 BssType; /* BSS_INFRA or BSS_ADHOC */
@@ -1386,12 +1387,12 @@ struct rt_sta_admin_config {
/* For WPA countermeasures */
unsigned long LastMicErrorTime; /* record last MIC error time */
- unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */
+ unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassociation). */
BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */
/* For WPA-PSK supplicant state */
WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */
u8 ReplayCounter[8];
- u8 ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */
+ u8 ANonce[32]; /* ANonce for WPA-PSK from auhenticator */
u8 SNonce[32]; /* SNonce for WPA-PSK */
u8 LastSNR0; /* last received BEACON's SNR */
@@ -1423,7 +1424,7 @@ struct rt_sta_admin_config {
u8 RSNIE_Len;
u8 RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */
- unsigned long CLBusyBytes; /* Save the total bytes received durning channel load scan time */
+ unsigned long CLBusyBytes; /* Save the total bytes received during channel load scan time */
u16 RPIDensity[8]; /* Array for RPI density collection */
u8 RMReqCnt; /* Number of measurement request saved. */
@@ -1489,9 +1490,9 @@ struct rt_sta_admin_config {
BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */
};
-/* This data structure keep the current active BSS/IBSS's configuration that this STA */
+/* This data structure keeps the current active BSS/IBSS's configuration that this STA */
/* had agreed upon joining the network. Which means these parameters are usually decided */
-/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */
+/* by the BSS/IBSS creator instead of user configuration. Data in this data structure */
/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */
/* Normally, after SCAN or failed roaming attempts, we need to recover back to */
/* the current active settings. */
@@ -1519,7 +1520,7 @@ struct rt_mac_table_entry {
/*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */
BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */
BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */
- BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
+ BOOLEAN ValidAsApCli; /* This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
BOOLEAN ValidAsMesh;
BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */
BOOLEAN isCached;
@@ -1527,7 +1528,7 @@ struct rt_mac_table_entry {
u8 EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */
/*jan for wpa */
- /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */
+ /* record which entry revoke MIC Failure, if it leaves the BSS itself, AP won't update aMICFailTime MIB */
u8 CMTimerRunning;
u8 apidx; /* MBSS number */
u8 RSNIE_Len;
@@ -1722,7 +1723,7 @@ struct rt_rtmp_adapter {
unsigned long Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */
u16 DeviceID; /* Read from PCI config */
unsigned long AccessBBPFailCount;
- BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */
+ BOOLEAN bPCIclkOff; /* flag that indicates if the PICE power status in Configuration Space.. */
BOOLEAN bPCIclkOffDisableTx; /* */
BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */
@@ -1871,9 +1872,9 @@ struct rt_rtmp_adapter {
/* ---------------------------- */
u8 RfIcType; /* RFIC_xxx */
unsigned long RfFreqOffset; /* Frequency offset for channel switching */
- struct rt_rtmp_rf_regs LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */
+ struct rt_rtmp_rf_regs LatchRfRegs; /* latch the latest RF programming value since RF IC doesn't support READ */
- EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */
+ EEPROM_ANTENNA_STRUC Antenna; /* Since Antenna definition is different for a & g. We need to save it for future reference. */
EEPROM_NIC_CONFIG2_STRUC NicConfig2;
/* This soft Rx Antenna Diversity mechanism is used only when user set */
@@ -1990,7 +1991,7 @@ struct rt_rtmp_adapter {
struct rt_common_config CommonCfg;
struct rt_mlme Mlme;
- /* AP needs those vaiables for site survey feature. */
+ /* AP needs those variables for site survey feature. */
struct rt_mlme_aux MlmeAux; /* temporary settings used during MLME state machine */
struct rt_bss_table ScanTab; /* store the latest SCAN result */
@@ -2012,7 +2013,7 @@ struct rt_rtmp_adapter {
/* various Counters */
struct rt_counter_802_3 Counters8023; /* 802.3 counters */
struct rt_counter_802_11 WlanCounters; /* 802.11 MIB counters */
- struct rt_counter_ralink RalinkCounters; /* Ralink propriety counters */
+ struct rt_counter_ralink RalinkCounters; /* Ralink proprietary counters */
struct rt_counter_drs DrsCounters; /* counters for Dynamic TX Rate Switching */
struct rt_private PrivateInfo; /* Private information & counters */
@@ -2024,7 +2025,7 @@ struct rt_rtmp_adapter {
u16 Sequence;
/* Control disconnect / connect event generation */
- /*+++Didn't used anymore */
+ /*+++Not used anymore */
unsigned long LinkDownTime;
/*--- */
unsigned long LastRxRate;
@@ -2036,7 +2037,7 @@ struct rt_rtmp_adapter {
unsigned long ExtraInfo; /* Extra information for displaying status */
unsigned long SystemErrorBitmap; /* b0: E2PROM version error */
- /*+++Didn't used anymore */
+ /*+++Not used anymore */
unsigned long MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */
/*--- */
@@ -2089,7 +2090,7 @@ struct rt_rtmp_adapter {
unsigned long BulkOutReq;
unsigned long BulkOutComplete;
unsigned long BulkOutCompleteOther;
- unsigned long BulkOutCompleteCancel; /* seems not use now? */
+ unsigned long BulkOutCompleteCancel; /* seems not used now? */
unsigned long BulkInReq;
unsigned long BulkInComplete;
unsigned long BulkInCompleteFail;
@@ -2196,9 +2197,9 @@ struct rt_rx_blk {
struct rt_tx_blk {
u8 QueIdx;
u8 TxFrameType; /* Indicate the Transmission type of the all frames in one batch */
- u8 TotalFrameNum; /* Total frame number want to send-out in one batch */
+ u8 TotalFrameNum; /* Total frame number that wants to send-out in one batch */
u16 TotalFragNum; /* Total frame fragments required in one batch */
- u16 TotalFrameLen; /* Total length of all frames want to send-out in one batch */
+ u16 TotalFrameLen; /* Total length of all frames that wants to send-out in one batch */
struct rt_queue_header TxPacketList;
struct rt_mac_table_entry *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */
@@ -2207,7 +2208,7 @@ struct rt_tx_blk {
/* Following structure used for the characteristics of a specific packet. */
void *pPacket;
u8 *pSrcBufHeader; /* Reference to the head of sk_buff->data */
- u8 *pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */
+ u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progresss */
u32 SrcBufLen; /* Length of packet payload which not including Layer 2 header */
u8 *pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */
u8 HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
@@ -2219,7 +2220,7 @@ struct rt_tx_blk {
u8 apidx; /* The interface associated to this packet */
u8 Wcid; /* The MAC entry associated to this packet */
u8 UserPriority; /* priority class of packet */
- u8 FrameGap; /* what kind of IFS this packet use */
+ u8 FrameGap; /* what kind of IFS does this packet use */
u8 MpduReqNum; /* number of fragments of this frame */
u8 TxRate; /* TODO: Obsoleted? Should change to MCS? */
u8 CipherAlg; /* cipher alogrithm */
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index 9c54bac..6ac617e 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -31,10 +31,11 @@
Miniport related definition header
Revision History:
- Who When What
+ Who When What
-------- ---------- ----------------------------------------------
- Paul Lin 08-01-2002 created
- John Chang 08-05-2003 add definition for 11g & other drafts
+ Paul Lin 08-01-2002 created
+ John Chang 08-05-2003 add definition for 11g & other drafts
+ Justin P. Mattock 11/07/2010 Fix some typos
*/
#ifndef __RTMP_DEF_H__
#define __RTMP_DEF_H__
@@ -111,11 +112,11 @@
WMM Note: If memory of your system is not much, please reduce the definition;
or when you do WMM test, the queue for low priority AC will be full, i.e.
TX_RING_SIZE + MAX_PACKETS_IN_QUEUE packets for the AC will be buffered in
- WLAN, maybe no any packet buffer can be got in Ethernet driver.
+ WLAN, maybe no packet buffers can get into the Ethernet driver.
- Sometimes no packet buffer can be got in Ethernet driver, the system will
+ Sometimes no packet buffer can be get into the Ethernet driver, the system will
send flow control packet to the sender to slow down its sending rate.
- So no WMM can be saw in the air.
+ So no WMM can be seen in the air.
*/
/*
@@ -125,7 +126,7 @@
And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to
clConfig.clNum = RX_RING_SIZE * 4;
*/
-/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */
+/* TODO: For VxWorks the size is 256. Shall we change the value as 256 for all OS? */
#define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */
#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
@@ -171,7 +172,7 @@
#define fRTMP_ADAPTER_SCAN_2040 0x04000000
#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
-#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */
+#define fRTMP_ADAPTER_START_UP 0x10000000 /*Device already initialized and enabled Tx/Rx. */
#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
@@ -205,8 +206,8 @@
#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002
/* Indicate driver should disable kick off hardware to send packets from now. */
#define fRTMP_PS_DISABLE_TX 0x00000004
-/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */
-/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */
+/* Indicate driver should IMMEDIATELY go to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */
+/* This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */
#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008
#define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */
@@ -303,7 +304,7 @@
/* WDS definition */
#define MAX_WDS_ENTRY 4
-#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
+#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links use pairwise key#60 ~ 63 in ASIC pairwise key table */
#define WDS_DISABLE_MODE 0
#define WDS_RESTRICT_MODE 1
@@ -559,7 +560,7 @@
#define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
/* For 802.11n D3.03 */
-/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */
+/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset element */
#define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */
#define IE_WAPI 68 /* WAPI information element */
#define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */
@@ -678,7 +679,7 @@
#define ACT_MACHINE_BASE 0
-/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */
+/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please do not modify it by your self. */
/*Category */
#define MT2_PEER_SPECTRUM_CATE 0
#define MT2_PEER_QOS_CATE 1
@@ -748,7 +749,7 @@
#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
/* */
-/* STA's AUTHENTICATION state machine: states, evvents, total function # */
+/* STA's AUTHENTICATION state machine: states, events, total function # */
/* */
#define AUTH_REQ_IDLE 0
#define AUTH_WAIT_SEQ2 1
@@ -948,7 +949,7 @@
#define BLOCK_ACK 0x60 /* b6:5 = 11 */
/* */
-/* rtmp_data.c use these definition */
+/* rtmp_data.c uses this definition */
/* */
#define LENGTH_802_11 24
#define LENGTH_802_11_AND_H 30
@@ -1288,7 +1289,7 @@
#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
-/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */
+/* if add new system event flag, please update the IW_SYS_EVENT_FLAG_END */
#define IW_SYS_EVENT_FLAG_END 0x0212
#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
/* For system event - end */
@@ -1305,7 +1306,7 @@
#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
-/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */
+/* if add new spoof attack event flag, please update the IW_SPOOF_EVENT_FLAG_END */
#define IW_SPOOF_EVENT_FLAG_END 0x0309
#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
/* For spoof attack event - end */
@@ -1319,7 +1320,7 @@
#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
-/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */
+/* if add new flooding attack event flag, please update the IW_FLOOD_EVENT_FLAG_END */
#define IW_FLOOD_EVENT_FLAG_END 0x0406
#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
/* For flooding attack - end */
diff --git a/drivers/staging/rt2860/rtmp_timer.h b/drivers/staging/rt2860/rtmp_timer.h
index 28b8ac6..15b6287 100644
--- a/drivers/staging/rt2860/rtmp_timer.h
+++ b/drivers/staging/rt2860/rtmp_timer.h
@@ -28,13 +28,14 @@
rtmp_timer.h
Abstract:
- Ralink Wireless Driver timer related data structures and delcarations
+ Ralink Wireless Driver timer related data structures and declarations
Revision History:
- Who When What
+ Who When What
-------- ---------- ----------------------------------------------
- Name Date Modification logs
- Shiang Tu Aug-28-2008 init version
+ Name Date Modification logs
+ Shiang Tu Aug-28-2008 init version
+ Justin P. Mattock 11/07/2010 Fix a typo
*/
@@ -51,8 +52,8 @@
/* ----------------- Timer Related MARCO ---------------*/
/* In some os or chipset, we have a lot of timer functions and will read/write register, */
-/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */
-/* submit to ctrl pipe). So we need a wrapper function to take care it. */
+/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */
+/* submit to ctrl pipe). So we need a wrapper function to take care it. */
#ifdef RTMP_TIMER_TASK_SUPPORT
typedef void(*RTMP_TIMER_TASK_HANDLE) (void *SystemSpecific1,
diff --git a/drivers/staging/rt2860/spectrum.h b/drivers/staging/rt2860/spectrum.h
index 648fd63..4c325ba 100644
--- a/drivers/staging/rt2860/spectrum.h
+++ b/drivers/staging/rt2860/spectrum.h
@@ -37,7 +37,7 @@ char RTMP_GetTxPwr(struct rt_rtmp_adapter *pAd, IN HTTRANSMIT_SETTING HTTxMode);
==========================================================================
Description:
Prepare Measurement request action frame and enqueue it into
- management queue waiting for transmition.
+ management queue waiting for transmission.
Parametrs:
1. the destination mac address of the frame.
@@ -60,7 +60,7 @@ void MakeMeasurementReqFrame(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
Prepare Measurement report action frame and enqueue it into
- management queue waiting for transmition.
+ management queue waiting for transmission.
Parametrs:
1. the destination mac address of the frame.
@@ -80,7 +80,7 @@ void EnqueueMeasurementRep(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
Prepare TPC Request action frame and enqueue it into
- management queue waiting for transmition.
+ management queue waiting for transmission.
Parametrs:
1. the destination mac address of the frame.
@@ -94,7 +94,7 @@ void EnqueueTPCReq(struct rt_rtmp_adapter *pAd, u8 *pDA, u8 DialogToken);
==========================================================================
Description:
Prepare TPC Report action frame and enqueue it into
- management queue waiting for transmition.
+ management queue waiting for transmission.
Parametrs:
1. the destination mac address of the frame.
@@ -110,7 +110,7 @@ void EnqueueTPCRep(struct rt_rtmp_adapter *pAd,
==========================================================================
Description:
Prepare Channel Switch Announcement action frame and enqueue it into
- management queue waiting for transmition.
+ management queue waiting for transmission.
Parametrs:
1. the destination mac address of the frame.
@@ -126,7 +126,7 @@ void EnqueueChSwAnn(struct rt_rtmp_adapter *pAd,
/*
==========================================================================
Description:
- Spectrun action frames Handler such as channel switch annoucement,
+ Spectrun action frames Handler such as channel switch announcement,
measurement report, measurement request actions frames.
Parametrs:
diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c
index b7efb0b..ab0a83b 100644
--- a/drivers/staging/rt2860/sta/assoc.c
+++ b/drivers/staging/rt2860/sta/assoc.c
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- John 2004-9-3 porting from RT2500
+ John 2004-9-3 porting from RT2500
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -277,10 +278,10 @@ void MlmeAssocReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *
u16 VarIesOffset;
u16 Status;
- /* Block all authentication request durning WPA block period */
+ /* Block all authentication request during WPA block period */
if (pAd->StaCfg.bBlockAssoc == TRUE) {
DBGPRINT(RT_DEBUG_TRACE,
- ("ASSOC - Block Assoc request durning WPA block period!\n"));
+ ("ASSOC - Block Assoc request during WPA block period!\n"));
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
Status = MLME_STATE_MACHINE_REJECT;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2,
@@ -605,10 +606,10 @@ void MlmeReassocReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem
u8 *pOutBuffer = NULL;
u16 Status;
- /* Block all authentication request durning WPA block period */
+ /* Block all authentication request during WPA block period */
if (pAd->StaCfg.bBlockAssoc == TRUE) {
DBGPRINT(RT_DEBUG_TRACE,
- ("ASSOC - Block ReAssoc request durning WPA block period!\n"));
+ ("ASSOC - Block ReAssoc request during WPA block period!\n"));
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
Status = MLME_STATE_MACHINE_REJECT;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2,
@@ -1001,7 +1002,7 @@ void AssocPostProc(struct rt_rtmp_adapter *pAd, u8 *pAddr2, u16 CapabilityInfo,
pAd->MlmeAux.CapabilityInfo =
CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
- /* Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on. */
+ /* Some HT AP might lost WMM IE. We add WMM ourselves. because HT requires QoS on. */
if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE)) {
pEdcaParm->bValid = TRUE;
pEdcaParm->Aifsn[0] = 3;
diff --git a/drivers/staging/rt2860/sta/auth.c b/drivers/staging/rt2860/sta/auth.c
index 404bd22..a2bfafd 100644
--- a/drivers/staging/rt2860/sta/auth.c
+++ b/drivers/staging/rt2860/sta/auth.c
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- John 2004-9-3 porting from RT2500
+ John 2004-9-3 porting from RT2500
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -455,10 +456,10 @@ BOOLEAN AUTH_ReqSend(struct rt_rtmp_adapter *pAd,
u8 *pOutBuffer = NULL;
unsigned long FrameLen = 0, tmp = 0;
- /* Block all authentication request durning WPA block period */
+ /* Block all authentication request during WPA block period */
if (pAd->StaCfg.bBlockAssoc == TRUE) {
DBGPRINT(RT_DEBUG_TRACE,
- ("%s - Block Auth request durning WPA block period!\n",
+ ("%s - Block Auth request during WPA block period!\n",
pSMName));
pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
Status = MLME_STATE_MACHINE_REJECT;
diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c
index c380551..4b2c84e 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- John 2004-08-08 Major modification from RT2560
+ John 2004-08-08 Major modification from RT2560
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -64,7 +65,7 @@ u8 CipherSuiteWpaNoneAesLen =
/* The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS, */
/* or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS */
-/* All settings successfuly negotiated furing MLME state machines become final settings */
+/* All settings successfuly negotiated firing MLME state machines become final settings */
/* and are copied to pAd->StaActive */
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
{ \
@@ -553,7 +554,7 @@ void CntlOidRTBssidProc(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *
NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0],
&pAd->ScanTab.BssEntry[BssIdx], sizeof(struct rt_bss_entry));
- /* Add SSID into MlmeAux for site surey joining hidden SSID */
+ /* Add SSID into MlmeAux for site survey joining hidden SSID */
pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid,
pAd->MlmeAux.SsidLen);
@@ -666,7 +667,7 @@ void CntlOidRTBssidProc(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *
}
/* Roaming is the only external request triggering CNTL state machine */
-/* despite of other "SET OID" operation. All "SET OID" related oerations */
+/* despite of other "SET OID" operation. All "SET OID" related operations */
/* happen in sequence, because no other SET OID will be sent to this device */
/* until the the previous SET operation is complete (successful o failed). */
/* So, how do we quarantee this ROAMING request won't corrupt other "SET OID"? */
@@ -1224,7 +1225,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
/* Change to AP channel */
if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) {
- /* Must using 40MHz. */
+ /* Must use 40MHz. */
pAd->CommonCfg.BBPCurrentBW = BW_40;
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
@@ -1259,7 +1260,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
} else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth ==
BW_40)) {
- /* Must using 40MHz. */
+ /* Must use 40MHz. */
pAd->CommonCfg.BBPCurrentBW = BW_40;
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
@@ -1343,12 +1344,12 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
AsicSetSlotTime(pAd, TRUE);
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
- /* Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit */
+ /* Call this for RTS protection for legacy rate, we will always enable RTS threshold, but normally it will not hit */
AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE,
FALSE);
if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) {
- /* Update HT protectionfor based on AP's operating mode. */
+ /* Update HT protection for based on AP's operating mode. */
if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1) {
AsicUpdateProtect(pAd,
pAd->MlmeAux.AddHtInfo.AddHtInfo2.
@@ -1530,7 +1531,7 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
/* Add BSSID to WCID search table */
AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid);
- /* If WEP is enabled, add paiewise and shared key */
+ /* If WEP is enabled, add pairwise and shared key */
if (((pAd->StaCfg.WpaSupplicantUP) &&
(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
@@ -1681,9 +1682,9 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
pAd->Mlme.PeriodicRound = 0;
pAd->Mlme.OneSecPeriodicRound = 0;
pAd->bConfigChanged = FALSE; /* Reset config flag */
- pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information to link is up */
+ pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information after link is up */
- /* Set asic auto fall back */
+ /* Set basic auto fall back */
{
u8 *pTable;
u8 TableSize = 0;
@@ -1854,8 +1855,8 @@ void LinkUp(struct rt_rtmp_adapter *pAd, u8 BssType)
Note:
We need more information to know it's this requst from AP.
If yes! we need to do extra handling, for example, remove the WPA key.
- Otherwise on 4-way handshaking will faied, since the WPA key didn't be
- remove while auto reconnect.
+ Otherwise on 4-way handshaking will fail, since the WPA key didn't get
+ removed while auto reconnect.
Disconnect request from AP, it means we will start afresh 4-way handshaking
on WPA mode.
@@ -1870,9 +1871,9 @@ void LinkDown(struct rt_rtmp_adapter *pAd, IN BOOLEAN IsReqFromAP)
return;
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
- /*Comment the codes, beasue the line 2291 call the same function. */
- /*RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); */
- /* Not allow go to sleep within linkdown function. */
+ /* Comment the codes, because the line 2291 call the same function. */
+ /* RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); */
+ /* Not allowed go to sleep within the linkdown function. */
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
if (pAd->CommonCfg.bWirelessEvent) {
@@ -1970,7 +1971,7 @@ void LinkDown(struct rt_rtmp_adapter *pAd, IN BOOLEAN IsReqFromAP)
/* Set LED */
RTMPSetLED(pAd, LED_LINK_DOWN);
pAd->LedIndicatorStrength = 0xF0;
- RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware is not done it. */
+ RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware has not done it. */
AsicDisableSync(pAd);
diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c
index 23879b7..d7c2012 100644
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -31,7 +31,8 @@
Data path subroutines
Revision History:
- Who When What
+ Who When What
+ Justin P. Mattock 11/07/2010 Fix typos
-------- ---------- ----------------------------------------------
*/
#include "../rt_config.h"
@@ -257,8 +258,8 @@ void STARxDataFrameAnnounce(struct rt_rtmp_adapter *pAd,
&& (pAd->CommonCfg.bDisableReordering == 0)) {
Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
} else {
- /* Determin the destination of the EAP frame */
- /* to WPA state machine or upper layer */
+ /* Determine the destination of the EAP frame */
+ /* to WPA state machine or upper layer */
STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk,
FromWhichBSSID);
}
@@ -853,7 +854,7 @@ Return Value:
NONE
Note:
- This function do early checking and classification for send-out packet.
+ This function does early checking and classification for send-out packet.
You only can put OS-depened & STA related code in here.
========================================================================
*/
@@ -943,7 +944,7 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket)
DBGPRINT(RT_DEBUG_ERROR,
("STASendPacket --> pSrcBufVA == NULL !SrcBufLen=%x\n",
SrcBufLen));
- /* Resourece is low, system did not allocate virtual address */
+ /* Resource is low, system did not allocate virtual address */
/* return NDIS_STATUS_FAILURE directly to upper layer */
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
return NDIS_STATUS_FAILURE;
@@ -979,7 +980,7 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket)
DBGPRINT(RT_DEBUG_ERROR,
("STASendPacket->Cannot find pEntry(%pM) in MacTab!\n",
pSrcBufVA));
- /* Resourece is low, system did not allocate virtual address */
+ /* Resource is low, system did not allocate virtual address */
/* return NDIS_STATUS_FAILURE directly to upper layer */
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
return NDIS_STATUS_FAILURE;
@@ -1057,9 +1058,9 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket)
/* STEP 2. Check the requirement of RTS: */
/* If multiple fragment required, RTS is required only for the first fragment */
- /* if the fragment size large than RTS threshold */
+ /* if the fragment size is larger than RTS threshold */
/* For RT28xx, Let ASIC send RTS/CTS */
-/* RTMP_SET_PACKET_RTS(pPacket, 0); */
+ /* RTMP_SET_PACKET_RTS(pPacket, 0); */
if (NumberOfFrag > 1)
RTSRequired =
(pAd->CommonCfg.FragmentThreshold >
@@ -1171,8 +1172,8 @@ int STASendPacket(struct rt_rtmp_adapter *pAd, void *pPacket)
========================================================================
Routine Description:
- This subroutine will scan through releative ring descriptor to find
- out avaliable free ring descriptor and compare with request size.
+ This subroutine will scan through relative ring descriptor to find
+ out available free ring descriptor and compare with request size.
Arguments:
pAd Pointer to our adapter
@@ -1588,7 +1589,7 @@ static inline u8 *STA_Build_ARalink_Frame_Header(struct rt_rtmp_adapter *pAd,
pHeaderBufPtr += 2;
pTxBlk->MpduHeaderLen += 2;
}
- /* padding at front of LLC header. LLC header should at 4-bytes aligment. */
+ /* padding at front of LLC header. LLC header should at 4-bytes alignment. */
pTxBlk->HdrPadLen = (unsigned long)pHeaderBufPtr;
pHeaderBufPtr = (u8 *)ROUND_UP(pHeaderBufPtr, 4);
pTxBlk->HdrPadLen = (unsigned long)(pHeaderBufPtr - pTxBlk->HdrPadLen);
@@ -2014,7 +2015,7 @@ void STA_Legacy_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk)
pHeaderBufPtr += 2;
pTxBlk->MpduHeaderLen += 2;
}
- /* The remaining content of MPDU header should locate at 4-octets aligment */
+ /* The remaining content of MPDU header should locate at 4-octets alignment */
pTxBlk->HdrPadLen = (unsigned long)pHeaderBufPtr;
pHeaderBufPtr = (u8 *)ROUND_UP(pHeaderBufPtr, 4);
pTxBlk->HdrPadLen = (unsigned long)(pHeaderBufPtr - pTxBlk->HdrPadLen);
@@ -2114,7 +2115,7 @@ void STA_ARalink_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk)
STA_Build_ARalink_Frame_Header(pAd, pTxBlk);
/* It's ok write the TxWI here, because the TxWI->MPDUtotalByteCount */
- /* will be updated after final frame was handled. */
+ /* will be updated after final frame was handled. */
RTMPWriteTxWI_Data(pAd,
(struct rt_txwi *) (&pTxBlk->
HeaderBuf
@@ -2291,8 +2292,8 @@ void STA_Fragment_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk
pTxBlk->pExtraLlcSnapEncap, pTxBlk->pKey,
0);
- /* NOTE: DON'T refer the skb->len directly after following copy. Becasue the length is not adjust */
- /* to correct lenght, refer to pTxBlk->SrcBufLen for the packet length in following progress. */
+ /* NOTE: DON'T refer the skb->len directly after following copy. Because the length is not adjusted */
+ /* to correct length, refer to pTxBlk->SrcBufLen for the packet length in following progress. */
NdisMoveMemory(pTxBlk->pSrcBufData + pTxBlk->SrcBufLen,
&pAd->PrivateInfo.Tx.MIC[0], 8);
/*skb_put((RTPKT_TO_OSPKT(pTxBlk->pPacket))->tail, 8); */
@@ -2301,7 +2302,7 @@ void STA_Fragment_Frame_Tx(struct rt_rtmp_adapter *pAd, struct rt_tx_blk *pTxBlk
pTxBlk->CipherAlg = CIPHER_TKIP_NO_MIC;
}
/* */
- /* calcuate the overhead bytes that encryption algorithm may add. This */
+ /* calculate the overhead bytes that encryption algorithm may add. This */
/* affects the calculate of "duration" field */
/* */
if ((pTxBlk->CipherAlg == CIPHER_WEP64)
diff --git a/drivers/staging/rt2860/sta/sanity.c b/drivers/staging/rt2860/sta/sanity.c
index 8f9fd19..0c32604 100644
--- a/drivers/staging/rt2860/sta/sanity.c
+++ b/drivers/staging/rt2860/sta/sanity.c
@@ -32,7 +32,8 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- John Chang 2004-09-01 add WMM support
+ John Chang 2004-09-01 add WMM support
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -118,7 +119,7 @@ BOOLEAN PeerAssocRspSanity(struct rt_rtmp_adapter *pAd, void * pMsg, unsigned lo
NdisMoveMemory(pAid, &pFrame->Octet[4], 2);
Length += 2;
- /* Aid already swaped byte order in RTMPFrameEndianChange() for big endian platform */
+ /* Aid already swapped byte order in RTMPFrameEndianChange() for big endian platform */
*pAid = (*pAid) & 0x3fff; /* AID is low 14-bit */
/* -- get supported rates from payload and advance the pointer */
diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c
index 747d3c6..05007d9 100644
--- a/drivers/staging/rt2860/sta/sync.c
+++ b/drivers/staging/rt2860/sta/sync.c
@@ -32,8 +32,9 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- John Chang 2004-09-01 modified for rt2561/2661
- Jan Lee 2006-08-01 modified for rt2860 for 802.11n
+ John Chang 2004-09-01 modified for rt2561/2661
+ Jan Lee 2006-08-01 modified for rt2860 for 802.11n
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -233,9 +234,9 @@ void MlmeScanReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *E
RTMPSuspendMsduTransmission(pAd);
/* */
- /* To prevent data lost. */
- /* Send an NULL data with turned PSM bit on to current associated AP before SCAN progress. */
- /* And should send an NULL data with turned PSM bit off to AP, when scan progress done */
+ /* To prevent data loss. */
+ /* Send a NULL data with turned PSM bit on to current associated AP before SCAN progress. */
+ /* And should send a NULL data with turned PSM bit off to AP, when scan progress done */
/* */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
&& (INFRA_ON(pAd))) {
@@ -750,9 +751,9 @@ void PeerBeaconAtJoinAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_el
/* BEACON from desired BSS/IBSS found. We should be able to decide most */
/* BSS parameters here. */
- /* Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION? */
- /* Do we need to receover back all parameters belonging to previous BSS? */
- /* A. Should be not. There's no back-door recover to previous AP. It still need */
+ /* Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATION? */
+ /* Do we need to recover back all parameters belonging to previous BSS? */
+ /* A. Should be not. There's no back-door recover to previous AP. It still needs */
/* a new JOIN-AUTH-ASSOC sequence. */
if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Bssid)) {
DBGPRINT(RT_DEBUG_TRACE,
@@ -876,7 +877,7 @@ void PeerBeaconAtJoinAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_el
pAd->MlmeAux.CfpMaxDuration = Cf.CfpMaxDuration;
pAd->MlmeAux.APRalinkIe = RalinkIe;
- /* Copy AP's supported rate to MlmeAux for creating assoication request */
+ /* Copy AP's supported rate to MlmeAux for creating association request */
/* Also filter out not supported rate */
pAd->MlmeAux.SupRateLen = SupRateLen;
NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate,
diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c
index 69b8a24..ff34832 100644
--- a/drivers/staging/rt2860/sta/wpa.c
+++ b/drivers/staging/rt2860/sta/wpa.c
@@ -33,7 +33,8 @@
Who When What
-------- ---------- ----------------------------------------------
Jan Lee 03-07-22 Initial
- Paul Lin 03-11-28 Modify for supplicant
+ Paul Lin 03-11-28 Modify for supplicant
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "../rt_config.h"
@@ -86,7 +87,7 @@ void RTMPReportMicError(struct rt_rtmp_adapter *pAd, struct rt_cipher_key *pWpaK
/* Violate MIC error counts, MIC countermeasures kicks in */
pAd->StaCfg.MicErrCnt++;
/* We shall block all reception */
- /* We shall clean all Tx ring and disassoicate from AP after next EAPOL frame */
+ /* We shall clean all Tx ring and disassociate from AP after next EAPOL frame */
/* */
/* No necessary to clean all Tx ring, on RTMPHardTransmit will stop sending non-802.1X EAPOL packets */
/* if pAd->StaCfg.MicErrCnt greater than 2. */
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index e095a44..5717e12 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -31,10 +31,11 @@
IOCTL related subroutines
Revision History:
- Who When What
+ Who When What
-------- ---------- ----------------------------------------------
- Rory Chen 01-03-2003 created
- Rory Chen 02-14-2005 modify to support RT61
+ Rory Chen 01-03-2003 created
+ Rory Chen 02-14-2005 modify to support RT61
+ Justin P. Mattock 11/07/2010 Fix typos
*/
#include "rt_config.h"
@@ -851,7 +852,7 @@ int rt_ioctl_giwscan(struct net_device *dev,
/*
Protocol:
- it will show scanned AP's WirelessMode .
+ it will show scanned AP's WirelessMode.
it might be
802.11a
802.11a/n
@@ -875,13 +876,13 @@ int rt_ioctl_giwscan(struct net_device *dev,
strcpy(iwe.u.name, "802.11a");
} else {
/*
- if one of non B mode rate is set supported rate . it mean G only.
+ if one of non B mode rate is set supported rate, it means G only.
*/
for (rateCnt = 0;
rateCnt < pBssEntry->SupRateLen;
rateCnt++) {
/*
- 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only.
+ 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate, it means G only.
*/
if (pBssEntry->SupRate[rateCnt] == 140
|| pBssEntry->SupRate[rateCnt] ==
@@ -1417,7 +1418,7 @@ int rt_ioctl_siwencode(struct net_device *dev,
if ((index >= 0) && (index < 4)) {
pAdapter->StaCfg.DefaultKeyId = index;
} else
- /* Don't complain if only change the mode */
+ /* Don't complain if the mode is only changed */
if (!(erq->flags & IW_ENCODE_MODE))
return -EINVAL;
}
@@ -2732,8 +2733,8 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg)
}
if (INFRA_ON(pAdapter)) {
/*BOOLEAN Cancelled; */
- /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
- /* Since calling this indicate user don't want to connect to that SSID anymore. */
+ /* Set the AutoReconnectSsid to prevent it from reconnecting to the old SSID */
+ /* Since calling this indicates users don't want to connect to that SSID anymore. */
pAdapter->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAdapter->MlmeAux.
AutoReconnectSsid,
@@ -2766,8 +2767,8 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg)
LinkDown(pAdapter, FALSE);
}
if (ADHOC_ON(pAdapter)) {
- /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
- /* Since calling this indicate user don't want to connect to that SSID anymore. */
+ /* Set the AutoReconnectSsid to prevent it from reconnecting to the old SSID */
+ /* Since calling this indicates users don't want to connect to that SSID anymore. */
pAdapter->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAdapter->MlmeAux.
AutoReconnectSsid,
@@ -2884,7 +2885,7 @@ int Set_NetworkType_Proc(struct rt_rtmp_adapter *pAdapter, char *arg)
}
/* Enable Rx with promiscuous reception */
RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
- /* ASIC supporsts sniffer function with replacing RSSI with timestamp. */
+ /* ASIC supports sniffer function with replacing RSSI with timestamp. */
/*RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value); */
/*Value |= (0x80); */
/*RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value); */
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ebf9074..a8820d3 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -27,8 +27,8 @@
#include "rt_config.h"
/* Following information will be show when you run 'modinfo' */
-/* *** If you have a solution for the bug in current version of driver, please mail to me. */
-/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */
+/* If you have a solution for the bug in current version of driver, please e-mail me. */
+/* Otherwise post to the forum at ralinktech's web site(www.ralinktech.com) and let all users help you. */
MODULE_AUTHOR("Paul Lin <paul_lin at ralinktech.com>");
MODULE_DESCRIPTION("RT2870/RT3070 Wireless Lan Linux Driver");
MODULE_LICENSE("GPL");
@@ -882,8 +882,8 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf,
if (net_dev == NULL)
goto err_out_free_radev;
- /* Here are the net_device structure with usb specific parameters. */
- /* for supporting Network Manager.
+ /* Here are the net_device structure with usb specific parameters.
+ * for supporting Network Manager.
* Set the sysfs physical device reference for the network logical device if set prior to registration will
* cause a symlink during initialization.
*/
diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h
index 6199ae6..116fc2c 100644
--- a/drivers/staging/rt2860/wpa.h
+++ b/drivers/staging/rt2860/wpa.h
@@ -32,13 +32,14 @@
Revision History:
Who When What
-------- ---------- ----------------------------------------------
- Name Date Modification logs
+ Name Date Modification logs
+ Justin P. Mattock 11/07/2010 Fix a typo
*/
#ifndef __WPA_H__
#define __WPA_H__
-/* EAPOL Key descripter frame format related length */
+/* EAPOL Key descriptor frame format related length */
#define LEN_KEY_DESC_NONCE 32
#define LEN_KEY_DESC_IV 16
#define LEN_KEY_DESC_RSC 8
--
1.7.3.2
More information about the devel
mailing list