[PATCH 6/7] rtl8192e: Make RT_TRACE use consistent
Mike McCormack
mikem at ring3k.org
Sun Feb 20 15:04:54 UTC 2011
Signed-off-by: Mike McCormack <mikem at ring3k.org>
---
drivers/staging/rtl8192e/r8192E.h | 2 +-
drivers/staging/rtl8192e/r8192E_core.c | 52 ++++++++++++++++----------------
drivers/staging/rtl8192e/r8192E_dm.c | 8 ++--
drivers/staging/rtl8192e/r8192E_wx.c | 2 +-
drivers/staging/rtl8192e/r8192_pm.c | 2 +-
drivers/staging/rtl8192e/r819xE_phy.c | 22 +++++++-------
6 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/staging/rtl8192e/r8192E.h b/drivers/staging/rtl8192e/r8192E.h
index c8df912..0330686 100644
--- a/drivers/staging/rtl8192e/r8192E.h
+++ b/drivers/staging/rtl8192e/r8192E.h
@@ -97,7 +97,7 @@
extern u32 rt_global_debug_component;
#define RT_TRACE(component, x, args...) \
do { if(rt_global_debug_component & component) \
- printk(KERN_DEBUG RTL819xE_MODULE_NAME ":" x "\n" , \
+ printk(KERN_DEBUG RTL819xE_MODULE_NAME ":" x , \
##args);\
}while(0);
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index f02ec61..9a88f49 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -518,7 +518,7 @@ static int proc_get_stats_rx(char *page, char **start,
static void rtl8192_proc_module_init(void)
{
- RT_TRACE(COMP_INIT, "Initializing proc filesystem");
+ RT_TRACE(COMP_INIT, "Initializing proc filesystem\n");
rtl8192_proc=create_proc_entry(RTL819xE_MODULE_NAME, S_IFDIR, init_net.proc_net);
}
@@ -1297,7 +1297,7 @@ static short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
pdesc = &ring->desc[idx];
if ((pdesc->OWN == 1) && (tcb_desc->queue_index != BEACON_QUEUE)) {
- RT_TRACE(COMP_ERR, "No more TX desc@%d, ring->idx = %d,idx = %d,%x",
+ RT_TRACE(COMP_ERR, "No more TX desc@%d, ring->idx = %d,idx = %d,%x\n",
tcb_desc->queue_index, ring->idx, idx, skb->len);
spin_unlock_irqrestore(&priv->irq_th_lock, flags);
return skb->len;
@@ -1615,7 +1615,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
if ((network->qos_data.active == 1) && (active_network == 1)) {
queue_work(priv->priv_wq, &priv->qos_activate);
- RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate \n");
+ RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate\n");
}
network->qos_data.active = 0;
network->qos_data.supported = 0;
@@ -1847,7 +1847,7 @@ static void rtl8192_hw_sleep_down(struct net_device *dev)
spin_lock(&priv->rf_ps_lock);
if (priv->RFChangeInProgress) {
spin_unlock(&priv->rf_ps_lock);
- RT_TRACE(COMP_RF, "rtl8192_hw_sleep_down(): RF Change in progress! \n");
+ RT_TRACE(COMP_RF, "rtl8192_hw_sleep_down(): RF Change in progress!\n");
printk("rtl8192_hw_sleep_down(): RF Change in progress!\n");
return;
}
@@ -1872,7 +1872,7 @@ static void rtl8192_hw_wakeup(struct net_device* dev)
spin_lock(&priv->rf_ps_lock);
if (priv->RFChangeInProgress) {
spin_unlock(&priv->rf_ps_lock);
- RT_TRACE(COMP_RF, "rtl8192_hw_wakeup(): RF Change in progress! \n");
+ RT_TRACE(COMP_RF, "rtl8192_hw_wakeup(): RF Change in progress!\n");
printk("rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again\n");
queue_delayed_work(priv->ieee80211->wq,&priv->ieee80211->hw_wakeup_wq,MSECS(10));//PowerSave is not supported if kernel version is below 2.6.20
return;
@@ -2160,8 +2160,8 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
ICVer8192 = (IC_Version&0xf); //bit0~3; 1:A cut, 2:B cut, 3:C cut...
ICVer8256 = ((IC_Version&0xf0)>>4);//bit4~6, bit7 reserved for other RF chip; 1:A cut, 2:B cut, 3:C cut...
- RT_TRACE(COMP_INIT, "\nICVer8192 = 0x%x\n", ICVer8192);
- RT_TRACE(COMP_INIT, "\nICVer8256 = 0x%x\n", ICVer8256);
+ RT_TRACE(COMP_INIT, "ICVer8192 = 0x%x\n", ICVer8192);
+ RT_TRACE(COMP_INIT, "ICVer8256 = 0x%x\n", ICVer8256);
if(ICVer8192 == 0x2) //B-cut
{
if(ICVer8256 == 0x5) //E-cut
@@ -2186,7 +2186,7 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
priv->eeprom_did = 0;
priv->eeprom_CustomerID = 0;
priv->eeprom_ChannelPlan = 0;
- RT_TRACE(COMP_INIT, "\nIC Version = 0x%x\n", 0xff);
+ RT_TRACE(COMP_INIT, "IC Version = 0x%x\n", 0xff);
}
RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
@@ -2369,11 +2369,11 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
if(priv->rf_type == RF_1T2R)
{
- RT_TRACE(COMP_INIT, "\n1T2R config\n");
+ RT_TRACE(COMP_INIT, "1T2R config\n");
}
else if (priv->rf_type == RF_2T4R)
{
- RT_TRACE(COMP_INIT, "\n2T4R config\n");
+ RT_TRACE(COMP_INIT, "2T4R config\n");
}
// 2008/01/16 MH We can only know RF type in the function. So we have to init
@@ -2486,8 +2486,8 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
RT_TRACE(COMP_INIT, "RegChannelPlan(%d)\n", priv->RegChannelPlan);
- RT_TRACE(COMP_INIT, "ChannelPlan = %d \n", priv->ChannelPlan);
- RT_TRACE(COMP_INIT, "LedStrategy = %d \n", priv->LedStrategy);
+ RT_TRACE(COMP_INIT, "ChannelPlan = %d\n", priv->ChannelPlan);
+ RT_TRACE(COMP_INIT, "LedStrategy = %d\n", priv->LedStrategy);
RT_TRACE(COMP_TRACE, "<==== ReadAdapterInfo\n");
return ;
@@ -2875,12 +2875,12 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
{
if(priv->ieee80211->RfOffReason > RF_CHANGE_BY_PS)
{ // H/W or S/W RF OFF before sleep.
- RT_TRACE((COMP_INIT|COMP_RF|COMP_POWER), "%s(): Turn off RF for RfOffReason(%d) ----------\n", __FUNCTION__,priv->ieee80211->RfOffReason);
+ RT_TRACE((COMP_INIT|COMP_RF|COMP_POWER), "%s(): Turn off RF for RfOffReason(%d)\n", __FUNCTION__,priv->ieee80211->RfOffReason);
MgntActSet_RF_State(dev, eRfOff, priv->ieee80211->RfOffReason);
}
else if(priv->ieee80211->RfOffReason >= RF_CHANGE_BY_IPS)
{ // H/W or S/W RF OFF before sleep.
- RT_TRACE((COMP_INIT|COMP_RF|COMP_POWER), "%s(): Turn off RF for RfOffReason(%d) ----------\n", __FUNCTION__,priv->ieee80211->RfOffReason);
+ RT_TRACE((COMP_INIT|COMP_RF|COMP_POWER), "%s(): Turn off RF for RfOffReason(%d)\n", __FUNCTION__,priv->ieee80211->RfOffReason);
MgntActSet_RF_State(dev, eRfOff, priv->ieee80211->RfOffReason);
}
else
@@ -3131,7 +3131,7 @@ void InactivePsWorkItemCallback(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
PRT_POWER_SAVE_CONTROL pPSC = (PRT_POWER_SAVE_CONTROL)(&(priv->ieee80211->PowerSaveControl));
- RT_TRACE(COMP_POWER, "InactivePsWorkItemCallback() ---------> \n");
+ RT_TRACE(COMP_POWER, "InactivePsWorkItemCallback() --------->\n");
//
// This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
// is really scheduled.
@@ -3152,7 +3152,7 @@ void InactivePsWorkItemCallback(struct net_device *dev)
// To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
//
pPSC->bSwRfProcessing = FALSE;
- RT_TRACE(COMP_POWER, "InactivePsWorkItemCallback() <--------- \n");
+ RT_TRACE(COMP_POWER, "InactivePsWorkItemCallback() <---------\n");
}
#ifdef ENABLE_LPS
@@ -3507,7 +3507,7 @@ static int _rtl8192_up(struct net_device *dev)
priv->up=1;
priv->ieee80211->ieee_up=1;
priv->bdisable_nic = false; //YJ,add,091111
- RT_TRACE(COMP_INIT, "Bringing up iface");
+ RT_TRACE(COMP_INIT, "Bringing up iface\n");
init_status = rtl8192_adapter_start(dev);
if(init_status != RT_STATUS_SUCCESS)
@@ -3914,7 +3914,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
{
if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
continue;
- RT_TRACE(COMP_DBG,"Jacken -> pPreviousstats->RxMIMOSignalStrength[rfpath] = %d \n" ,pprevious_stats->RxMIMOSignalStrength[rfpath] );
+ RT_TRACE(COMP_DBG, "pPreviousstats->RxMIMOSignalStrength[rfpath] = %d\n", pprevious_stats->RxMIMOSignalStrength[rfpath]);
//Fixed by Jacken 2008-03-20
if(priv->stats.rx_rssi_percentage[rfpath] == 0)
{
@@ -3933,7 +3933,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
}
- RT_TRACE(COMP_DBG,"Jacken -> priv->RxStats.RxRSSIPercentage[rfPath] = %d \n" ,priv->stats.rx_rssi_percentage[rfpath] );
+ RT_TRACE(COMP_DBG, "priv->RxStats.RxRSSIPercentage[rfPath] = %d \n" , priv->stats.rx_rssi_percentage[rfpath]);
}
}
@@ -4697,7 +4697,7 @@ static int __devinit rtl8192_pci_probe(struct pci_dev *pdev,
int ret = -ENODEV;
unsigned long pmem_start, pmem_len, pmem_flags;
- RT_TRACE(COMP_INIT,"Configuring chip resources");
+ RT_TRACE(COMP_INIT,"Configuring chip resources\n");
if( pci_enable_device (pdev) ){
RT_TRACE(COMP_ERR,"Failed to enable PCI device");
@@ -4731,20 +4731,20 @@ static int __devinit rtl8192_pci_probe(struct pci_dev *pdev,
pmem_flags = pci_resource_flags (pdev, 1);
if (!(pmem_flags & IORESOURCE_MEM)) {
- RT_TRACE(COMP_ERR,"region #1 not a MMIO resource, aborting");
+ RT_TRACE(COMP_ERR, "region #1 not a MMIO resource, aborting\n");
goto fail;
}
//DMESG("Memory mapped space @ 0x%08lx ", pmem_start);
if( ! request_mem_region(pmem_start, pmem_len, RTL819xE_MODULE_NAME)) {
- RT_TRACE(COMP_ERR,"request_mem_region failed!");
+ RT_TRACE(COMP_ERR,"request_mem_region failed!\n");
goto fail;
}
ioaddr = (unsigned long)ioremap_nocache( pmem_start, pmem_len);
if( ioaddr == (unsigned long)NULL ){
- RT_TRACE(COMP_ERR,"ioremap failed!");
+ RT_TRACE(COMP_ERR,"ioremap failed!\n");
// release_mem_region( pmem_start, pmem_len );
goto fail1;
}
@@ -4778,7 +4778,7 @@ static int __devinit rtl8192_pci_probe(struct pci_dev *pdev,
RT_TRACE(COMP_INIT, "Driver probe completed1\n");
if(rtl8192_init(dev)!=0){
- RT_TRACE(COMP_ERR, "Initialization failed");
+ RT_TRACE(COMP_ERR, "Initialization failed\n");
goto fail;
}
@@ -4896,7 +4896,7 @@ static int __init rtl8192_pci_module_init(void)
printk(KERN_INFO "\nLinux kernel driver for RTL8192 based WLAN cards\n");
printk(KERN_INFO "Copyright (c) 2007-2008, Realsil Wlan\n");
- RT_TRACE(COMP_INIT, "Initializing module");
+ RT_TRACE(COMP_INIT, "Initializing module\n");
rtl8192_proc_module_init();
if(0!=pci_register_driver(&rtl8192_pci_driver))
{
@@ -4912,7 +4912,7 @@ static void __exit rtl8192_pci_module_exit(void)
{
pci_unregister_driver(&rtl8192_pci_driver);
- RT_TRACE(COMP_DOWN, "Exiting");
+ RT_TRACE(COMP_DOWN, "Exiting\n");
rtl8192_proc_module_remove();
ieee80211_rtl_exit();
}
diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c
index 20b201d..330e9d9 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.c
+++ b/drivers/staging/rtl8192e/r8192E_dm.c
@@ -751,12 +751,12 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
// read and filter out unreasonable value
tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
- RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
+ RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d\n", tmpRegA);
if(tmpRegA < 3 || tmpRegA > 13)
return;
if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature
tmpRegA = 12;
- RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
+ RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d\n", tmpRegA);
priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
@@ -2656,7 +2656,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
}
- RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" , priv->undecorated_smoothed_pwdb);
+ RT_TRACE(COMP_TXAGC, "priv->undecorated_smoothed_pwdb = %ld\n" , priv->undecorated_smoothed_pwdb);
if(priv->ieee80211->state == IEEE80211_LINKED)
{
@@ -2693,7 +2693,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
if( (priv->bDynamicTxHighPower != priv->bLastDTPFlag_High ) ||
(priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low ) )
{
- RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190() channel = %d \n" , priv->ieee80211->current_network.channel);
+ RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
diff --git a/drivers/staging/rtl8192e/r8192E_wx.c b/drivers/staging/rtl8192e/r8192E_wx.c
index 529929c..bd89bb0 100644
--- a/drivers/staging/rtl8192e/r8192E_wx.c
+++ b/drivers/staging/rtl8192e/r8192E_wx.c
@@ -653,7 +653,7 @@ static int r8192_wx_set_enc(struct net_device *dev,
down(&priv->wx_sem);
- RT_TRACE(COMP_SEC, "Setting SW wep key");
+ RT_TRACE(COMP_SEC, "Setting SW wep key\n");
ret = ieee80211_wx_set_encode(priv->ieee80211,info,wrqu,key);
up(&priv->wx_sem);
diff --git a/drivers/staging/rtl8192e/r8192_pm.c b/drivers/staging/rtl8192e/r8192_pm.c
index 5679c8b..a762c2c 100644
--- a/drivers/staging/rtl8192e/r8192_pm.c
+++ b/drivers/staging/rtl8192e/r8192_pm.c
@@ -73,7 +73,7 @@ int rtl8192E_resume (struct pci_dev *pdev)
int err;
u32 val;
- RT_TRACE(COMP_POWER, "================>r8192E resume call.");
+ RT_TRACE(COMP_POWER, "================>r8192E resume call.\n");
pci_set_power_state(pdev, PCI_D0);
diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c
index ef23b0e..f4d220a 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.c
+++ b/drivers/staging/rtl8192e/r819xE_phy.c
@@ -1099,7 +1099,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
for (i=0; i<PHY_REGArrayLen; i+=2)
{
rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
- RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n",i, Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
+ RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x\n",i, Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
}
}
else if (ConfigType == BaseBand_Config_AGC_TAB)
@@ -1107,7 +1107,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
for (i=0; i<AGCTAB_ArrayLen; i+=2)
{
rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
- RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n",i, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]);
+ RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x\n",i, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]);
}
}
}
@@ -1257,7 +1257,7 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo
switch(CheckBlock)
{
case HW90_BLOCK_MAC:
- RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
+ RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!\n");
break;
case HW90_BLOCK_PHY0:
@@ -1286,7 +1286,7 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo
//
if(dwRegRead != WriteData[i])
{
- RT_TRACE(COMP_ERR, "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]);
+ RT_TRACE(COMP_ERR, "====>error=====dwRegRead: %x, WriteData: %x\n", dwRegRead, WriteData[i]);
ret = RT_STATUS_FAILURE;
break;
}
@@ -1416,14 +1416,14 @@ void rtl8192_phy_getTxPower(struct net_device* dev)
priv->DefaultInitialGain[1] = read_nic_byte(priv, rOFDM0_XBAGCCore1);
priv->DefaultInitialGain[2] = read_nic_byte(priv, rOFDM0_XCAGCCore1);
priv->DefaultInitialGain[3] = read_nic_byte(priv, rOFDM0_XDAGCCore1);
- RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n",
+ RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
// read framesync
priv->framesync = read_nic_byte(priv, rOFDM0_RxDetector3);
priv->framesyncC34 = read_nic_dword(priv, rOFDM0_RxDetector2);
- RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
+ RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x\n",
rOFDM0_RxDetector3, priv->framesync);
// read SIFS (save the value read fome MACPHY_REG.txt)
priv->SifsTime = read_nic_word(priv, SIFS);
@@ -1888,20 +1888,20 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
case WIRELESS_MODE_A:
case WIRELESS_MODE_N_5G:
if (channel<=14){
- RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14");
+ RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14\n");
return false;
}
break;
case WIRELESS_MODE_B:
if (channel>14){
- RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14");
+ RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14\n");
return false;
}
break;
case WIRELESS_MODE_G:
case WIRELESS_MODE_N_24G:
if (channel>14){
- RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14");
+ RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14\n");
return false;
}
break;
@@ -2141,7 +2141,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
atomic_dec(&(priv->ieee80211->atm_swbw));
priv->SetBWModeInProgress= false;
- RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb()");
+ RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb()\n");
}
/******************************************************************************
@@ -2246,7 +2246,7 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
break;
default:
- RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
+ RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n");
break;
}
}
--
1.7.0.4
More information about the devel
mailing list