[PATCH 10/15] staging: ath6kl: Convert (status != A_OK) to (status)

Joe Perches joe at perches.com
Wed Feb 2 22:05:56 UTC 2011


Just use the status variable as a test not a comparison.

Signed-off-by: Joe Perches <joe at perches.com>
---
 drivers/staging/ath6kl/bmi/src/bmi.c               |   52 ++++++++++----------
 .../staging/ath6kl/hif/sdio/linux_sdio/src/hif.c   |    2 +-
 drivers/staging/ath6kl/htc2/AR6000/ar6k.c          |   36 +++++++-------
 drivers/staging/ath6kl/htc2/htc.c                  |    2 +-
 drivers/staging/ath6kl/miscdrv/common_drv.c        |   22 ++++----
 drivers/staging/ath6kl/os/linux/ar6000_drv.c       |   26 +++++-----
 drivers/staging/ath6kl/os/linux/ar6000_pm.c        |   12 ++--
 drivers/staging/ath6kl/os/linux/cfg80211.c         |    8 ++--
 drivers/staging/ath6kl/os/linux/hci_bridge.c       |    2 +-
 drivers/staging/ath6kl/os/linux/ioctl.c            |    4 +-
 drivers/staging/ath6kl/os/linux/wireless_ext.c     |    6 +-
 drivers/staging/ath6kl/reorder/rcv_aggr.c          |    2 +-
 12 files changed, 87 insertions(+), 87 deletions(-)

diff --git a/drivers/staging/ath6kl/bmi/src/bmi.c b/drivers/staging/ath6kl/bmi/src/bmi.c
index 44add2d..104c53e 100644
--- a/drivers/staging/ath6kl/bmi/src/bmi.c
+++ b/drivers/staging/ath6kl/bmi/src/bmi.c
@@ -121,7 +121,7 @@ BMIDone(HIF_DEVICE *device)
     cid = BMI_DONE;
 
     status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
@@ -156,14 +156,14 @@ BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
     cid = BMI_GET_TARGET_INFO;
 
     status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
 
     status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
                                                 sizeof(targ_info->target_ver), true);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
         return A_ERROR;
     }
@@ -172,7 +172,7 @@ BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
         /* Determine how many bytes are in the Target's targ_info */
         status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
                                             sizeof(targ_info->target_info_byte_count), true);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
             return A_ERROR;
         }
@@ -187,7 +187,7 @@ BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
         status = bmiBufferReceive(device,
                         ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
                         sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count), true);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
                         					targ_info->target_info_byte_count));
             return A_ERROR;
@@ -239,12 +239,12 @@ BMIReadMemory(HIF_DEVICE *device,
         offset += sizeof(length);
 
         status = bmiBufferSend(device, pBMICmdBuf, offset);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
             return A_ERROR;
         }
         status = bmiBufferReceive(device, pBMICmdBuf, rxlen, true);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
             return A_ERROR;
         }
@@ -309,7 +309,7 @@ BMIWriteMemory(HIF_DEVICE *device,
         A_MEMCPY(&(pBMICmdBuf[offset]), src, txlen);
         offset += txlen;
         status = bmiBufferSend(device, pBMICmdBuf, offset);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
             return A_ERROR;
         }
@@ -352,13 +352,13 @@ BMIExecute(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), param, sizeof(*param));
     offset += sizeof(*param);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
 
     status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), false);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
         return A_ERROR;
     }
@@ -397,7 +397,7 @@ BMISetAppStart(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), &address, sizeof(address));
     offset += sizeof(address);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
@@ -436,13 +436,13 @@ BMIReadSOCRegister(HIF_DEVICE *device,
     offset += sizeof(address);
 
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
 
     status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*param), true);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
         return A_ERROR;
     }
@@ -483,7 +483,7 @@ BMIWriteSOCRegister(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), &param, sizeof(param));
     offset += sizeof(param);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
@@ -532,13 +532,13 @@ BMIrompatchInstall(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), &do_activate, sizeof(do_activate));
     offset += sizeof(do_activate);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
 
     status = bmiBufferReceive(device, pBMICmdBuf, sizeof(*rompatch_id), true);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
         return A_ERROR;
     }
@@ -576,7 +576,7 @@ BMIrompatchUninstall(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), &rompatch_id, sizeof(rompatch_id));
     offset += sizeof(rompatch_id);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
@@ -619,7 +619,7 @@ _BMIrompatchChangeActivation(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), rompatch_list, length);
     offset += length;
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
         return A_ERROR;
     }
@@ -683,7 +683,7 @@ BMILZData(HIF_DEVICE *device,
         A_MEMCPY(&(pBMICmdBuf[offset]), &buffer[length - remaining], txlen);
         offset += txlen;
         status = bmiBufferSend(device, pBMICmdBuf, offset);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
             return A_ERROR;
         }
@@ -722,7 +722,7 @@ BMILZStreamStart(HIF_DEVICE *device,
     A_MEMCPY(&(pBMICmdBuf[offset]), &address, sizeof(address));
     offset += sizeof(address);
     status = bmiBufferSend(device, pBMICmdBuf, offset);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to Start LZ Stream to the device\n"));
         return A_ERROR;
     }
@@ -757,7 +757,7 @@ bmiBufferSend(HIF_DEVICE *device,
          * make all HIF accesses 4-byte aligned */
         status = HIFReadWrite(device, address, (u8 *)pBMICmdCredits, 4,
             HIF_RD_SYNC_BYTE_INC, NULL);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
             return A_ERROR;
         }
@@ -769,7 +769,7 @@ bmiBufferSend(HIF_DEVICE *device,
         address = mboxAddress[ENDPOINT1];
         status = HIFReadWrite(device, address, buffer, length,
             HIF_WR_SYNC_BYTE_INC, NULL);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
             return A_ERROR;
         }
@@ -868,7 +868,7 @@ bmiBufferReceive(HIF_DEVICE *device,
                 status = getPendingEventsFunc(device,
                                               &hifPendingEvents,
                                               NULL);
-                if (status != A_OK) {
+                if (status) {
                     AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to get pending events \n"));
                     break;
                 }
@@ -881,7 +881,7 @@ bmiBufferReceive(HIF_DEVICE *device,
             
             status = HIFReadWrite(device, RX_LOOKAHEAD_VALID_ADDRESS, (u8 *)&word_available,
                 sizeof(word_available), HIF_RD_SYNC_BYTE_INC, NULL);
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read RX_LOOKAHEAD_VALID register\n"));
                 return A_ERROR;
             }
@@ -932,7 +932,7 @@ bmiBufferReceive(HIF_DEVICE *device,
              * The rationale here is to make all HIF accesses a multiple of 4 bytes */
             status = HIFReadWrite(device, address, (u8 *)pBMICmdCredits, sizeof(*pBMICmdCredits),
                 HIF_RD_SYNC_BYTE_FIX, NULL);
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
                 return A_ERROR;
             }
@@ -949,7 +949,7 @@ bmiBufferReceive(HIF_DEVICE *device,
 
     address = mboxAddress[ENDPOINT1];
     status = HIFReadWrite(device, address, buffer, length, HIF_RD_SYNC_BYTE_INC, NULL);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
         return A_ERROR;
     }
diff --git a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c b/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c
index 57cb1f7..773d134 100644
--- a/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c
+++ b/drivers/staging/ath6kl/hif/sdio/linux_sdio/src/hif.c
@@ -1088,7 +1088,7 @@ static int hifDeviceSuspend(struct device *dev)
     if (device && device->claimedContext && osdrvCallbacks.deviceSuspendHandler) {
         device->is_suspend = true; /* set true first for PowerStateChangeNotify(..) */
         status = osdrvCallbacks.deviceSuspendHandler(device->claimedContext);
-        if (status != A_OK) {
+        if (status) {
             device->is_suspend = false;
         }
     }
diff --git a/drivers/staging/ath6kl/htc2/AR6000/ar6k.c b/drivers/staging/ath6kl/htc2/AR6000/ar6k.c
index 0f57cfc..ed51a8d 100644
--- a/drivers/staging/ath6kl/htc2/AR6000/ar6k.c
+++ b/drivers/staging/ath6kl/htc2/AR6000/ar6k.c
@@ -106,7 +106,7 @@ int DevSetup(AR6K_DEVICE *pDev)
         status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
                                     &pDev->MailBoxInfo, sizeof(pDev->MailBoxInfo));
 
-        if (status != A_OK) {
+        if (status) {
             A_ASSERT(false);
             break;
         }
@@ -127,7 +127,7 @@ int DevSetup(AR6K_DEVICE *pDev)
         status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
                                     blocksizes, sizeof(blocksizes));
 
-        if (status != A_OK) {
+        if (status) {
             A_ASSERT(false);
             break;
         }
@@ -266,7 +266,7 @@ int DevEnableInterrupts(AR6K_DEVICE *pDev)
                           HIF_WR_SYNC_BYTE_INC,
                           NULL);
 
-    if (status != A_OK) {
+    if (status) {
         /* Can't write it for some reason */
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
                         ("Failed to update interrupt control registers err: %d\n", status));
@@ -510,7 +510,7 @@ int DevWaitForPendingRecv(AR6K_DEVICE *pDev,u32 TimeoutInMs,bool *pbIsRecvPendin
                               sizeof(A_UCHAR),
                               HIF_RD_SYNC_BYTE_INC,
                               NULL);
-        if(status)
+        if (status)
         {
             AR_DEBUG_PRINTF(ATH_LOG_ERR,("DevWaitForPendingRecv:Read HOST_INT_STATUS_ADDRESS Failed 0x%X\n",status));
             break;
@@ -1156,7 +1156,7 @@ static int SendBuffers(AR6K_DEVICE *pDev, int mbox)
                               paddedLength,
                               request,
                               NULL);
-        if (status != A_OK) {
+        if (status) {
             break;
         }
         totalBytes += sendList[i].length;
@@ -1182,7 +1182,7 @@ static int GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
         address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
         status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
                               HIF_RD_SYNC_BYTE_FIX, NULL);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
                 ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
             status = A_ERROR;
@@ -1244,7 +1244,7 @@ static int RecvBuffers(AR6K_DEVICE *pDev, int mbox)
              * until we get at least 1 credit or it times out */
         status = GetCredits(pDev, mbox, &credits);
 
-        if (status != A_OK) {
+        if (status) {
             break;
         }
 
@@ -1264,7 +1264,7 @@ static int RecvBuffers(AR6K_DEVICE *pDev, int mbox)
                                   paddedLength,
                                   request,
                                   NULL);
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
                         recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
                 break;
@@ -1275,7 +1275,7 @@ static int RecvBuffers(AR6K_DEVICE *pDev, int mbox)
             curBuffer++;
         }
 
-        if (status != A_OK) {
+        if (status) {
             break;
         }
             /* go back and get some more */
@@ -1302,7 +1302,7 @@ static int DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
             /* send out buffers */
         status = SendBuffers(pDev,mbox);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
             break;
         }
@@ -1310,7 +1310,7 @@ static int DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
             /* go get them, this will block */
         status =  RecvBuffers(pDev, mbox);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
             break;
         }
@@ -1348,7 +1348,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
         status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
                                     g_MailboxAddrs, sizeof(g_MailboxAddrs));
 
-        if (status != A_OK) {
+        if (status) {
             A_ASSERT(false);
             break;
         }
@@ -1357,7 +1357,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
         status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
                                     g_BlockSizes, sizeof(g_BlockSizes));
 
-        if (status != A_OK) {
+        if (status) {
             A_ASSERT(false);
             break;
         }
@@ -1380,7 +1380,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
              * mailbox 0 */
         status = GetCredits(pDev, 0, &credits);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
             break;
         }
@@ -1395,7 +1395,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
                               HIF_RD_SYNC_BYTE_INC,
                               NULL);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
             break;
         }
@@ -1423,7 +1423,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
                               HIF_WR_SYNC_BYTE_INC,
                               NULL);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
             break;
         }
@@ -1440,7 +1440,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
                               HIF_WR_SYNC_BYTE_INC,
                               NULL);
 
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
             break;
         }
@@ -1450,7 +1450,7 @@ int DoMboxHWTest(AR6K_DEVICE *pDev)
             /* execute the test on each mailbox */
         for (i = 0; i < AR6K_MAILBOXES; i++) {
             status = DoOneMboxHWTest(pDev, i);
-            if (status != A_OK) {
+            if (status) {
                 break;
             }
         }
diff --git a/drivers/staging/ath6kl/htc2/htc.c b/drivers/staging/ath6kl/htc2/htc.c
index afc523f..cf88a9a 100644
--- a/drivers/staging/ath6kl/htc2/htc.c
+++ b/drivers/staging/ath6kl/htc2/htc.c
@@ -240,7 +240,7 @@ int HTCWaitTarget(HTC_HANDLE HTCHandle)
 
         status = DoMboxHWTest(&target->Device);
 
-        if (status != A_OK) {
+        if (status) {
             break;
         }
 
diff --git a/drivers/staging/ath6kl/miscdrv/common_drv.c b/drivers/staging/ath6kl/miscdrv/common_drv.c
index 0c9c8a3..bf71f96 100644
--- a/drivers/staging/ath6kl/miscdrv/common_drv.c
+++ b/drivers/staging/ath6kl/miscdrv/common_drv.c
@@ -107,12 +107,12 @@ int ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, u32 RegisterAddr, u32
                               4,
                               HIF_WR_SYNC_BYTE_FIX,
                               NULL);
-        if (status != A_OK) {
+        if (status) {
             break;
         }
     }
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
             Address, RegisterAddr));
         return status;
@@ -128,7 +128,7 @@ int ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, u32 RegisterAddr, u32
                           HIF_WR_SYNC_BYTE_INC,
                           NULL);
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
             Address, RegisterAddr));
         return status;
@@ -157,7 +157,7 @@ int ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, u32 RegisterAddr, u32
                           HIF_WR_SYNC_BYTE_INC,
                           NULL);
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
              RegisterAddr, Address));
         return status;
@@ -171,7 +171,7 @@ int ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, u32 RegisterAddr, u32
                           HIF_WR_SYNC_BYTE_INC,
                           NULL);
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
             RegisterAddr, Address));
         return status;
@@ -196,7 +196,7 @@ ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, u32 *address, u32 *data)
                                              WINDOW_READ_ADDR_ADDRESS,
                                              *address);
 
-    if (status != A_OK) {
+    if (status) {
         return status;
     }
 
@@ -207,7 +207,7 @@ ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, u32 *address, u32 *data)
                           sizeof(u32),
                           HIF_RD_SYNC_BYTE_INC,
                           NULL);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
         return status;
     }
@@ -232,7 +232,7 @@ ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, u32 *address, u32 *data)
                           sizeof(u32),
                           HIF_WR_SYNC_BYTE_INC,
                           NULL);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
         return status;
     }
@@ -294,7 +294,7 @@ ar6k_ReadTargetRegister(HIF_DEVICE *hifDevice, int regsel, u32 *regval)
                           HIF_WR_SYNC_BYTE_FIX,
                           NULL);
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write CPU_DBG_SEL (%d)\n", regsel));
         return status;
     }
@@ -305,7 +305,7 @@ ar6k_ReadTargetRegister(HIF_DEVICE *hifDevice, int regsel, u32 *regval)
                           sizeof(vals),
                           HIF_RD_SYNC_BYTE_INC,
                           NULL);
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from CPU_DBG_ADDRESS\n"));
         return status;
     }
@@ -335,7 +335,7 @@ _do_write_diag(HIF_DEVICE *hifDevice, u32 addr, u32 value)
     int status;
 
     status = ar6000_WriteRegDiag(hifDevice, &addr, &value);
-    if (status != A_OK)
+    if (status)
     {
         AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
     }
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index ed82a3b..f08c08b 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -692,7 +692,7 @@ ar6000_init_module(void)
 #endif /* CONFIG_HOST_GPIO_SUPPORT */
 
     status = HIFInit(&osdrvCallbacks);
-    if(status != A_OK)
+    if (status)
         return -ENODEV;
 
     return 0;
@@ -1126,7 +1126,7 @@ ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, u32 address, bool c
 
             status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size);
 
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
                 A_RELEASE_FIRMWARE(fw_entry);
                 return A_ERROR;
@@ -1145,7 +1145,7 @@ ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, u32 address, bool c
         status = BMIWriteMemory(ar->arHifDevice, address, (A_UCHAR *)fw_entry->data, fw_entry_size);
     }
 
-    if (status != A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
         A_RELEASE_FIRMWARE(fw_entry);
         return A_ERROR;
@@ -1808,12 +1808,12 @@ ar6000_avail_ev(void *context, void *hif_handle)
                 rtnl_lock();
                 status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
                 rtnl_unlock();
-                if (status != A_OK) {
+                if (status) {
                     AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_init\n"));
                 }
             } while (false);
 
-            if (status != A_OK) {
+            if (status) {
                 init_status = status;
                 goto avail_ev_failed;
             }
@@ -1911,7 +1911,7 @@ ar6000_restart_endpoint(struct net_device *dev)
         status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
         rtnl_unlock();
 
-        if (status!=A_OK) {
+        if (status) {
             break;
         }
         if (ar->arSsidLen && ar->arWlanState == WLAN_ENABLED) {
@@ -2666,7 +2666,7 @@ int ar6000_init(struct net_device *dev)
     /* start HTC */
     status = HTCStart(ar->arHtcTarget);
 
-    if (status != A_OK) {
+    if (status) {
         if (ar->arWmiEnabled == true) {
             wmi_shutdown(ar->arWmi);
             ar->arWmiEnabled = false;
@@ -3575,13 +3575,13 @@ ar6000_rx(void *Context, HTC_PACKET *pPacket)
     int        status = pPacket->Status;
     HTC_ENDPOINT_ID   ept = pPacket->Endpoint;
 
-    A_ASSERT((status != A_OK) ||
+    A_ASSERT((status) ||
              (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
 
     AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx ar=0x%lx eid=%d, skb=0x%lx, data=0x%lx, len=0x%x status:%d",
                     (unsigned long)ar, ept, (unsigned long)skb, (unsigned long)pPacket->pBuffer,
                     pPacket->ActualLength, status));
-    if (status != A_OK) {
+    if (status) {
         if (status != A_ECANCELED) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("RX ERR (%d) \n",status));
         }
@@ -3612,7 +3612,7 @@ ar6000_rx(void *Context, HTC_PACKET *pPacket)
     AR6000_SPIN_UNLOCK(&ar->arLock, 0);
 
     skb->dev = ar->arNetDev;
-    if (status != A_OK) {
+    if (status) {
         AR6000_STAT_INC(ar, rx_errors);
         A_NETBUF_FREE(skb);
     } else if (ar->arWmiEnabled == true) {
@@ -3790,7 +3790,7 @@ ar6000_rx(void *Context, HTC_PACKET *pPacket)
                         status = wmi_dot3_2_dix(skb);
                     }
 
-                    if (status != A_OK) {
+                    if (status) {
                         /* Drop frames that could not be processed (lack of memory, etc.) */
                         A_NETBUF_FREE(skb);
                         goto rx_done;
@@ -5335,7 +5335,7 @@ ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid)
         status = A_OK;
     }
 
-    if (status != A_OK) {
+    if (status) {
         A_NETBUF_FREE(osbuf);
     }
     return status;
@@ -6141,7 +6141,7 @@ ar6000_connect_to_ap(struct ar6_softc *ar)
                                  ar->arSsidLen, ar->arSsid,
                                  ar->arReqBssid, ar->arChannelHint,
                                  ar->arConnectCtrlFlags);
-        if (status != A_OK) {
+        if (status) {
             wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB);
             if (!ar->arUserBssFilter) {
                 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_pm.c b/drivers/staging/ath6kl/os/linux/ar6000_pm.c
index 0995bbb..d2d18da 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_pm.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_pm.c
@@ -155,7 +155,7 @@ static void ar6000_wow_suspend(AR_SOFTC_T *ar)
             addWowCmd.filter_size = 6; /* MAC address */
             addWowCmd.filter_offset = 0;
             status = wmi_add_wow_pattern_cmd(ar->arWmi, &addWowCmd, ar->arNetDev->dev_addr, macMask, addWowCmd.filter_size);
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to add WoW pattern\n"));
             }
         }
@@ -172,7 +172,7 @@ static void ar6000_wow_suspend(AR_SOFTC_T *ar)
             memset(&ipCmd, 0, sizeof(ipCmd));
             ipCmd.ips[0] = ifa->ifa_local;
             status = wmi_set_ip_cmd(ar->arWmi, &ipCmd);
-            if (status != A_OK) {
+            if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup IP for ARP agent\n"));
             }
         }
@@ -182,13 +182,13 @@ static void ar6000_wow_suspend(AR_SOFTC_T *ar)
 #endif
 
         status = wmi_set_wow_mode_cmd(ar->arWmi, &wowMode);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to enable wow mode\n"));
         }
         ar6k_send_asleep_event_to_app(ar, true);
 
         status = wmi_set_host_sleep_mode_cmd(ar->arWmi, &hostSleepMode);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to set host asleep\n"));
         }
 
@@ -529,7 +529,7 @@ ar6000_setup_deep_sleep_state(struct ar6_softc *ar, AR6000_WLAN_STATE state)
         }
     } while (0);
 
-    if (status!=A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to enter/exit deep sleep %d\n", state));
     }
 
@@ -628,7 +628,7 @@ ar6000_update_wlan_pwr_state(struct ar6_softc *ar, AR6000_WLAN_STATE state, bool
 
     }
 
-    if (status!=A_OK) {
+    if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup WLAN state %d\n", ar->arWlanState));
         ar->arWlanState = oldstate;
     } else if (status == A_OK) {
diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
index dcbb062..92aeda6 100644
--- a/drivers/staging/ath6kl/os/linux/cfg80211.c
+++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
@@ -311,7 +311,7 @@ ar6k_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
                                    ar->arChannelHint);
 
         up(&ar->arSem);
-        if (status != A_OK) {
+        if (status) {
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_reconnect_cmd failed\n", __func__));
             return -EIO;
         }
@@ -410,7 +410,7 @@ ar6k_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
         ar->arSsidLen = 0;
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Invalid request\n", __func__));
         return -ENOENT;
-    } else if (status != A_OK) {
+    } else if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_connect_cmd failed\n", __func__));
         return -EIO;
     }
@@ -892,7 +892,7 @@ ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
                     (u8 *)mac_addr, SYNC_BOTH_WMIFLAG);
 
 
-    if(status != A_OK) {
+    if (status) {
         return -EIO;
     }
 
@@ -1015,7 +1015,7 @@ ar6k_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *ndev,
                             ar->arPairwiseCrypto, GROUP_USAGE | TX_USAGE,
                             key->key_len, key->seq, key->key, KEY_OP_INIT_VAL,
                             NULL, SYNC_BOTH_WMIFLAG);
-    if (status != A_OK) {
+    if (status) {
         return -EIO;
     }
 
diff --git a/drivers/staging/ath6kl/os/linux/hci_bridge.c b/drivers/staging/ath6kl/os/linux/hci_bridge.c
index f8ac5fc..82cf52f 100644
--- a/drivers/staging/ath6kl/os/linux/hci_bridge.c
+++ b/drivers/staging/ath6kl/os/linux/hci_bridge.c
@@ -1127,7 +1127,7 @@ hcibridge_init_module(void)
     hciTransCallbacks.cleanupTransport = ar6000_cleanup_hci;
 
     status = ar6000_register_hci_transport(&hciTransCallbacks);
-    if(status != A_OK)
+    if (status)
         return -ENODEV;
 
     return 0;
diff --git a/drivers/staging/ath6kl/os/linux/ioctl.c b/drivers/staging/ath6kl/os/linux/ioctl.c
index 8f7d20a..3463a50 100644
--- a/drivers/staging/ath6kl/os/linux/ioctl.c
+++ b/drivers/staging/ath6kl/os/linux/ioctl.c
@@ -1826,7 +1826,7 @@ ar6000_ioctl_setkey(AR_SOFTC_T *ar, struct ieee80211req_key *ik)
                                 ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr,
                                 SYNC_BOTH_WMIFLAG);
 
-        if (status != A_OK) {
+        if (status) {
             return -EIO;
         }
     } else {
@@ -2003,7 +2003,7 @@ int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
                 status = wmi_setPmkid_cmd(ar->arWmi, req.pi_bssid, req.pi_pmkid,
                               req.pi_enable);
 
-                if (status != A_OK) {
+                if (status) {
                     ret = -EIO;
                     goto ioctl_done;
                 }
diff --git a/drivers/staging/ath6kl/os/linux/wireless_ext.c b/drivers/staging/ath6kl/os/linux/wireless_ext.c
index 7cf4f62..6d3ae2c 100644
--- a/drivers/staging/ath6kl/os/linux/wireless_ext.c
+++ b/drivers/staging/ath6kl/os/linux/wireless_ext.c
@@ -622,7 +622,7 @@ ar6000_ioctl_siwessid(struct net_device *dev,
                 status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
                                            ar->arChannelHint);
                 up(&ar->arSem);
-                if (status != A_OK) {
+                if (status) {
                     return -EIO;
                 }
                 return 0;
@@ -1575,7 +1575,7 @@ ar6000_ioctl_siwpmksa(struct net_device *dev,
             ret=-1;
             break;
     }
-    if (status != A_OK) {
+    if (status) {
         ret = -1;
     }
 
@@ -1793,7 +1793,7 @@ ar6000_ioctl_siwencodeext(struct net_device *dev,
                             keyData, KEY_OP_INIT_VAL,
                             (u8 *)ext->addr.sa_data,
                             SYNC_BOTH_WMIFLAG);
-         if (status != A_OK) {
+         if (status) {
             return -EIO;
          }
 
diff --git a/drivers/staging/ath6kl/reorder/rcv_aggr.c b/drivers/staging/ath6kl/reorder/rcv_aggr.c
index 5eeb6e3..dc1ea55 100644
--- a/drivers/staging/ath6kl/reorder/rcv_aggr.c
+++ b/drivers/staging/ath6kl/reorder/rcv_aggr.c
@@ -92,7 +92,7 @@ aggr_init(ALLOC_NETBUFS netbuf_allocator)
     A_PRINTF("going out of aggr_init..status %s\n",
                     (status == A_OK) ? "OK":"Error");
 
-    if(status != A_OK) {
+    if (status) {
         /* Cleanup */
         aggr_module_destroy(p_aggr);
     }
-- 
1.7.4.rc3




More information about the devel mailing list