[PATCH 1/4] drivers:staging:ti-st: remove TI_ST from staging
pavan_savoy at ti.com
pavan_savoy at ti.com
Wed Oct 6 00:08:34 UTC 2010
From: Pavan Savoy <pavan_savoy at ti.com>
remove the 3 source files st_core.c, st_kim.c and st_ll.c
from staging, also modify the Kconfig and Makefile to not
to include them in build.
Signed-off-by: Pavan Savoy <pavan_savoy at ti.com>
---
drivers/staging/ti-st/Kconfig | 11 -
drivers/staging/ti-st/Makefile | 2 -
drivers/staging/ti-st/st_core.c | 1030 ---------------------------------------
drivers/staging/ti-st/st_kim.c | 797 ------------------------------
drivers/staging/ti-st/st_ll.c | 149 ------
5 files changed, 0 insertions(+), 1989 deletions(-)
delete mode 100644 drivers/staging/ti-st/st_core.c
delete mode 100644 drivers/staging/ti-st/st_kim.c
delete mode 100644 drivers/staging/ti-st/st_ll.c
diff --git a/drivers/staging/ti-st/Kconfig b/drivers/staging/ti-st/Kconfig
index 858062d..074b8e8 100644
--- a/drivers/staging/ti-st/Kconfig
+++ b/drivers/staging/ti-st/Kconfig
@@ -3,17 +3,6 @@
# drivers (BT, FM and GPS)
#
menu "Texas Instruments shared transport line discipline"
-config TI_ST
- tristate "Shared transport core driver"
- depends on RFKILL
- select FW_LOADER
- help
- This enables the shared transport core driver for TI
- BT / FM and GPS combo chips. This enables protocol drivers
- to register themselves with core and send data, the responses
- are returned to relevant protocol drivers based on their
- packet types.
-
config ST_BT
tristate "BlueZ bluetooth driver for ST"
depends on BT && RFKILL
diff --git a/drivers/staging/ti-st/Makefile b/drivers/staging/ti-st/Makefile
index 0167d1d..5f11b82 100644
--- a/drivers/staging/ti-st/Makefile
+++ b/drivers/staging/ti-st/Makefile
@@ -2,6 +2,4 @@
# Makefile for TI's shared transport line discipline
# and its protocol drivers (BT, FM, GPS)
#
-obj-$(CONFIG_TI_ST) += st_drv.o
-st_drv-objs := st_core.o st_kim.o st_ll.o
obj-$(CONFIG_ST_BT) += bt_drv.o
diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c
deleted file mode 100644
index 5bef61e..0000000
--- a/drivers/staging/ti-st/st_core.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-/*
- * Shared Transport Line discipline driver Core
- * This hooks up ST KIM driver and ST LL driver
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#define pr_fmt(fmt) "(stc): " fmt
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-#include <linux/ti_wilink_st.h>
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name) name
-const unsigned char *protocol_strngs[] = {
- PROTO_ENTRY(ST_BT, "Bluetooth"),
- PROTO_ENTRY(ST_FM, "FM"),
- PROTO_ENTRY(ST_GPS, "GPS"),
-};
-/* function pointer pointing to either,
- * st_kim_recv during registration to receive fw download responses
- * st_int_recv after registration to receive proto stack responses
- */
-void (*st_recv) (void*, const unsigned char*, long);
-
-/********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
-{
- unsigned char i = 0;
- pr_debug(" %s ", __func__);
- for (i = 0; i < ST_MAX; i++) {
- if (st_gdata->list[i] != NULL)
- return ST_NOTEMPTY;
- /* not empty */
- }
- /* list empty */
- return ST_EMPTY;
-}
-#endif
-
-/* can be called in from
- * -- KIM (during fw download)
- * -- ST Core (during st_write)
- *
- * This is the internal write function - a wrapper
- * to tty->ops->write
- */
-int st_int_write(struct st_data_s *st_gdata,
- const unsigned char *data, int count)
-{
- struct tty_struct *tty;
- if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
- pr_err("tty unavailable to perform write");
- return -1;
- }
- tty = st_gdata->tty;
-#ifdef VERBOSE
- print_hex_dump(KERN_DEBUG, "<out<", DUMP_PREFIX_NONE,
- 16, 1, data, count, 0);
-#endif
- return tty->ops->write(tty, data, count);
-
-}
-
-/*
- * push the skb received to relevant
- * protocol stacks
- */
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
-{
- pr_info(" %s(prot:%d) ", __func__, protoid);
-
- if (unlikely
- (st_gdata == NULL || st_gdata->rx_skb == NULL
- || st_gdata->list[protoid] == NULL)) {
- pr_err("protocol %d not registered, no data to send?",
- protoid);
- kfree_skb(st_gdata->rx_skb);
- return;
- }
- /* this cannot fail
- * this shouldn't take long
- * - should be just skb_queue_tail for the
- * protocol stack driver
- */
- if (likely(st_gdata->list[protoid]->recv != NULL)) {
- if (unlikely
- (st_gdata->list[protoid]->recv
- (st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
- != 0)) {
- pr_err(" proto stack %d's ->recv failed", protoid);
- kfree_skb(st_gdata->rx_skb);
- return;
- }
- } else {
- pr_err(" proto stack %d's ->recv null", protoid);
- kfree_skb(st_gdata->rx_skb);
- }
- return;
-}
-
-/**
- * st_reg_complete -
- * to call registration complete callbacks
- * of all protocol stack drivers
- */
-void st_reg_complete(struct st_data_s *st_gdata, char err)
-{
- unsigned char i = 0;
- pr_info(" %s ", __func__);
- for (i = 0; i < ST_MAX; i++) {
- if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
- st_gdata->list[i]->reg_complete_cb != NULL))
- st_gdata->list[i]->reg_complete_cb
- (st_gdata->list[i]->priv_data, err);
- }
-}
-
-static inline int st_check_data_len(struct st_data_s *st_gdata,
- int protoid, int len)
-{
- register int room = skb_tailroom(st_gdata->rx_skb);
-
- pr_debug("len %d room %d", len, room);
-
- if (!len) {
- /* Received packet has only packet header and
- * has zero length payload. So, ask ST CORE to
- * forward the packet to protocol driver (BT/FM/GPS)
- */
- st_send_frame(protoid, st_gdata);
-
- } else if (len > room) {
- /* Received packet's payload length is larger.
- * We can't accommodate it in created skb.
- */
- pr_err("Data length is too large len %d room %d", len,
- room);
- kfree_skb(st_gdata->rx_skb);
- } else {
- /* Packet header has non-zero payload length and
- * we have enough space in created skb. Lets read
- * payload data */
- st_gdata->rx_state = ST_BT_W4_DATA;
- st_gdata->rx_count = len;
- return len;
- }
-
- /* Change ST state to continue to process next
- * packet */
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_skb = NULL;
- st_gdata->rx_count = 0;
-
- return 0;
-}
-
-/**
- * st_wakeup_ack - internal function for action when wake-up ack
- * received
- */
-static inline void st_wakeup_ack(struct st_data_s *st_gdata,
- unsigned char cmd)
-{
- register struct sk_buff *waiting_skb;
- unsigned long flags = 0;
-
- spin_lock_irqsave(&st_gdata->lock, flags);
- /* de-Q from waitQ and Q in txQ now that the
- * chip is awake
- */
- while ((waiting_skb = skb_dequeue(&st_gdata->tx_waitq)))
- skb_queue_tail(&st_gdata->txq, waiting_skb);
-
- /* state forwarded to ST LL */
- st_ll_sleep_state(st_gdata, (unsigned long)cmd);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
-
- /* wake up to send the recently copied skbs from waitQ */
- st_tx_wakeup(st_gdata);
-}
-
-/**
- * st_int_recv - ST's internal receive function.
- * Decodes received RAW data and forwards to corresponding
- * client drivers (Bluetooth,FM,GPS..etc).
- * This can receive various types of packets,
- * HCI-Events, ACL, SCO, 4 types of HCI-LL PM packets
- * CH-8 packets from FM, CH-9 packets from GPS cores.
- */
-void st_int_recv(void *disc_data,
- const unsigned char *data, long count)
-{
- register char *ptr;
- struct hci_event_hdr *eh;
- struct hci_acl_hdr *ah;
- struct hci_sco_hdr *sh;
- struct fm_event_hdr *fm;
- struct gps_event_hdr *gps;
- register int len = 0, type = 0, dlen = 0;
- static enum proto_type protoid = ST_MAX;
- struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
-
- ptr = (char *)data;
- /* tty_receive sent null ? */
- if (unlikely(ptr == NULL) || (st_gdata == NULL)) {
- pr_err(" received null from TTY ");
- return;
- }
-
- pr_info("count %ld rx_state %ld"
- "rx_count %ld", count, st_gdata->rx_state,
- st_gdata->rx_count);
-
- /* Decode received bytes here */
- while (count) {
- if (st_gdata->rx_count) {
- len = min_t(unsigned int, st_gdata->rx_count, count);
- memcpy(skb_put(st_gdata->rx_skb, len), ptr, len);
- st_gdata->rx_count -= len;
- count -= len;
- ptr += len;
-
- if (st_gdata->rx_count)
- continue;
-
- /* Check ST RX state machine , where are we? */
- switch (st_gdata->rx_state) {
-
- /* Waiting for complete packet ? */
- case ST_BT_W4_DATA:
- pr_debug("Complete pkt received");
-
- /* Ask ST CORE to forward
- * the packet to protocol driver */
- st_send_frame(protoid, st_gdata);
-
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_skb = NULL;
- protoid = ST_MAX; /* is this required ? */
- continue;
-
- /* Waiting for Bluetooth event header ? */
- case ST_BT_W4_EVENT_HDR:
- eh = (struct hci_event_hdr *)st_gdata->rx_skb->
- data;
-
- pr_debug("Event header: evt 0x%2.2x"
- "plen %d", eh->evt, eh->plen);
-
- st_check_data_len(st_gdata, protoid, eh->plen);
- continue;
-
- /* Waiting for Bluetooth acl header ? */
- case ST_BT_W4_ACL_HDR:
- ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
- data;
- dlen = __le16_to_cpu(ah->dlen);
-
- pr_info("ACL header: dlen %d", dlen);
-
- st_check_data_len(st_gdata, protoid, dlen);
- continue;
-
- /* Waiting for Bluetooth sco header ? */
- case ST_BT_W4_SCO_HDR:
- sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
- data;
-
- pr_info("SCO header: dlen %d", sh->dlen);
-
- st_check_data_len(st_gdata, protoid, sh->dlen);
- continue;
- case ST_FM_W4_EVENT_HDR:
- fm = (struct fm_event_hdr *)st_gdata->rx_skb->
- data;
- pr_info("FM Header: ");
- st_check_data_len(st_gdata, ST_FM, fm->plen);
- continue;
- /* TODO : Add GPS packet machine logic here */
- case ST_GPS_W4_EVENT_HDR:
- /* [0x09 pkt hdr][R/W byte][2 byte len] */
- gps = (struct gps_event_hdr *)st_gdata->rx_skb->
- data;
- pr_info("GPS Header: ");
- st_check_data_len(st_gdata, ST_GPS, gps->plen);
- continue;
- } /* end of switch rx_state */
- }
-
- /* end of if rx_count */
- /* Check first byte of packet and identify module
- * owner (BT/FM/GPS) */
- switch (*ptr) {
-
- /* Bluetooth event packet? */
- case HCI_EVENT_PKT:
- pr_info("Event packet");
- st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
- st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
- type = HCI_EVENT_PKT;
- protoid = ST_BT;
- break;
-
- /* Bluetooth acl packet? */
- case HCI_ACLDATA_PKT:
- pr_info("ACL packet");
- st_gdata->rx_state = ST_BT_W4_ACL_HDR;
- st_gdata->rx_count = HCI_ACL_HDR_SIZE;
- type = HCI_ACLDATA_PKT;
- protoid = ST_BT;
- break;
-
- /* Bluetooth sco packet? */
- case HCI_SCODATA_PKT:
- pr_info("SCO packet");
- st_gdata->rx_state = ST_BT_W4_SCO_HDR;
- st_gdata->rx_count = HCI_SCO_HDR_SIZE;
- type = HCI_SCODATA_PKT;
- protoid = ST_BT;
- break;
-
- /* Channel 8(FM) packet? */
- case ST_FM_CH8_PKT:
- pr_info("FM CH8 packet");
- type = ST_FM_CH8_PKT;
- st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
- st_gdata->rx_count = FM_EVENT_HDR_SIZE;
- protoid = ST_FM;
- break;
-
- /* Channel 9(GPS) packet? */
- case 0x9: /*ST_LL_GPS_CH9_PKT */
- pr_info("GPS CH9 packet");
- type = 0x9; /* ST_LL_GPS_CH9_PKT; */
- protoid = ST_GPS;
- st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
- st_gdata->rx_count = 3; /* GPS_EVENT_HDR_SIZE -1*/
- break;
- case LL_SLEEP_IND:
- case LL_SLEEP_ACK:
- case LL_WAKE_UP_IND:
- pr_info("PM packet");
- /* this takes appropriate action based on
- * sleep state received --
- */
- st_ll_sleep_state(st_gdata, *ptr);
- ptr++;
- count--;
- continue;
- case LL_WAKE_UP_ACK:
- pr_info("PM packet");
- /* wake up ack received */
- st_wakeup_ack(st_gdata, *ptr);
- ptr++;
- count--;
- continue;
- /* Unknow packet? */
- default:
- pr_err("Unknown packet type %2.2x", (__u8) *ptr);
- ptr++;
- count--;
- continue;
- };
- ptr++;
- count--;
-
- switch (protoid) {
- case ST_BT:
- /* Allocate new packet to hold received data */
- st_gdata->rx_skb =
- bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- bt_cb(st_gdata->rx_skb)->pkt_type = type;
- break;
- case ST_FM: /* for FM */
- st_gdata->rx_skb =
- alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- /* place holder 0x08 */
- skb_reserve(st_gdata->rx_skb, 1);
- st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
- break;
- case ST_GPS:
- /* for GPS */
- st_gdata->rx_skb =
- alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- /* place holder 0x09 */
- skb_reserve(st_gdata->rx_skb, 1);
- st_gdata->rx_skb->cb[0] = 0x09; /*ST_GPS_CH9_PKT; */
- break;
- case ST_MAX:
- break;
- }
- }
- pr_debug("done %s", __func__);
- return;
-}
-
-/**
- * st_int_dequeue - internal de-Q function.
- * If the previous data set was not written
- * completely, return that skb which has the pending data.
- * In normal cases, return top of txq.
- */
-struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
-{
- struct sk_buff *returning_skb;
-
- pr_debug("%s", __func__);
- if (st_gdata->tx_skb != NULL) {
- returning_skb = st_gdata->tx_skb;
- st_gdata->tx_skb = NULL;
- return returning_skb;
- }
- return skb_dequeue(&st_gdata->txq);
-}
-
-/**
- * st_int_enqueue - internal Q-ing function.
- * Will either Q the skb to txq or the tx_waitq
- * depending on the ST LL state.
- * If the chip is asleep, then Q it onto waitq and
- * wakeup the chip.
- * txq and waitq needs protection since the other contexts
- * may be sending data, waking up chip.
- */
-void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
-{
- unsigned long flags = 0;
-
- pr_debug("%s", __func__);
- spin_lock_irqsave(&st_gdata->lock, flags);
-
- switch (st_ll_getstate(st_gdata)) {
- case ST_LL_AWAKE:
- pr_info("ST LL is AWAKE, sending normally");
- skb_queue_tail(&st_gdata->txq, skb);
- break;
- case ST_LL_ASLEEP_TO_AWAKE:
- skb_queue_tail(&st_gdata->tx_waitq, skb);
- break;
- case ST_LL_AWAKE_TO_ASLEEP:
- pr_err("ST LL is illegal state(%ld),"
- "purging received skb.", st_ll_getstate(st_gdata));
- kfree_skb(skb);
- break;
- case ST_LL_ASLEEP:
- skb_queue_tail(&st_gdata->tx_waitq, skb);
- st_ll_wakeup(st_gdata);
- break;
- default:
- pr_err("ST LL is illegal state(%ld),"
- "purging received skb.", st_ll_getstate(st_gdata));
- kfree_skb(skb);
- break;
- }
-
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- pr_debug("done %s", __func__);
- return;
-}
-
-/*
- * internal wakeup function
- * called from either
- * - TTY layer when write's finished
- * - st_write (in context of the protocol stack)
- */
-void st_tx_wakeup(struct st_data_s *st_data)
-{
- struct sk_buff *skb;
- unsigned long flags; /* for irq save flags */
- pr_debug("%s", __func__);
- /* check for sending & set flag sending here */
- if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
- pr_info("ST already sending");
- /* keep sending */
- set_bit(ST_TX_WAKEUP, &st_data->tx_state);
- return;
- /* TX_WAKEUP will be checked in another
- * context
- */
- }
- do { /* come back if st_tx_wakeup is set */
- /* woke-up to write */
- clear_bit(ST_TX_WAKEUP, &st_data->tx_state);
- while ((skb = st_int_dequeue(st_data))) {
- int len;
- spin_lock_irqsave(&st_data->lock, flags);
- /* enable wake-up from TTY */
- set_bit(TTY_DO_WRITE_WAKEUP, &st_data->tty->flags);
- len = st_int_write(st_data, skb->data, skb->len);
- skb_pull(skb, len);
- /* if skb->len = len as expected, skb->len=0 */
- if (skb->len) {
- /* would be the next skb to be sent */
- st_data->tx_skb = skb;
- spin_unlock_irqrestore(&st_data->lock, flags);
- break;
- }
- kfree_skb(skb);
- spin_unlock_irqrestore(&st_data->lock, flags);
- }
- /* if wake-up is set in another context- restart sending */
- } while (test_bit(ST_TX_WAKEUP, &st_data->tx_state));
-
- /* clear flag sending */
- clear_bit(ST_TX_SENDING, &st_data->tx_state);
-}
-
-/********************************************************************/
-/* functions called from ST KIM
-*/
-void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
-{
- seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
- st_gdata->protos_registered,
- st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
- st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
- st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
-}
-
-/********************************************************************/
-/*
- * functions called from protocol stack drivers
- * to be EXPORT-ed
- */
-long st_register(struct st_proto_s *new_proto)
-{
- struct st_data_s *st_gdata;
- long err = 0;
- unsigned long flags = 0;
-
- st_kim_ref(&st_gdata, 0);
- pr_info("%s(%d) ", __func__, new_proto->type);
- if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
- || new_proto->reg_complete_cb == NULL) {
- pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
- return -1;
- }
-
- if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
- pr_err("protocol %d not supported", new_proto->type);
- return -EPROTONOSUPPORT;
- }
-
- if (st_gdata->list[new_proto->type] != NULL) {
- pr_err("protocol %d already registered", new_proto->type);
- return -EALREADY;
- }
-
- /* can be from process context only */
- spin_lock_irqsave(&st_gdata->lock, flags);
-
- if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
- pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
- /* fw download in progress */
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
- st_gdata->list[new_proto->type] = new_proto;
- st_gdata->protos_registered++;
- new_proto->write = st_write;
-
- set_bit(ST_REG_PENDING, &st_gdata->st_state);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return -EINPROGRESS;
- } else if (st_gdata->protos_registered == ST_EMPTY) {
- pr_info(" protocol list empty :%d ", new_proto->type);
- set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
- st_recv = st_kim_recv;
-
- /* release lock previously held - re-locked below */
- spin_unlock_irqrestore(&st_gdata->lock, flags);
-
- /* enable the ST LL - to set default chip state */
- st_ll_enable(st_gdata);
- /* this may take a while to complete
- * since it involves BT fw download
- */
- err = st_kim_start(st_gdata->kim_data);
- if (err != 0) {
- clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
- if ((st_gdata->protos_registered != ST_EMPTY) &&
- (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
- pr_err(" KIM failure complete callback ");
- st_reg_complete(st_gdata, -1);
- }
-
- return -1;
- }
-
- /* the protocol might require other gpios to be toggled
- */
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
- clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
- st_recv = st_int_recv;
-
- /* this is where all pending registration
- * are signalled to be complete by calling callback functions
- */
- if ((st_gdata->protos_registered != ST_EMPTY) &&
- (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
- pr_debug(" call reg complete callback ");
- st_reg_complete(st_gdata, 0);
- }
- clear_bit(ST_REG_PENDING, &st_gdata->st_state);
-
- /* check for already registered once more,
- * since the above check is old
- */
- if (st_gdata->list[new_proto->type] != NULL) {
- pr_err(" proto %d already registered ",
- new_proto->type);
- return -EALREADY;
- }
-
- spin_lock_irqsave(&st_gdata->lock, flags);
- st_gdata->list[new_proto->type] = new_proto;
- st_gdata->protos_registered++;
- new_proto->write = st_write;
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return err;
- }
- /* if fw is already downloaded & new stack registers protocol */
- else {
- switch (new_proto->type) {
- case ST_BT:
- /* do nothing */
- break;
- case ST_FM:
- case ST_GPS:
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
- break;
- case ST_MAX:
- default:
- pr_err("%d protocol not supported",
- new_proto->type);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return -EPROTONOSUPPORT;
- }
- st_gdata->list[new_proto->type] = new_proto;
- st_gdata->protos_registered++;
- new_proto->write = st_write;
-
- /* lock already held before entering else */
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return err;
- }
- pr_debug("done %s(%d) ", __func__, new_proto->type);
-}
-EXPORT_SYMBOL_GPL(st_register);
-
-/* to unregister a protocol -
- * to be called from protocol stack driver
- */
-long st_unregister(enum proto_type type)
-{
- long err = 0;
- unsigned long flags = 0;
- struct st_data_s *st_gdata;
-
- pr_debug("%s: %d ", __func__, type);
-
- st_kim_ref(&st_gdata, 0);
- if (type < ST_BT || type >= ST_MAX) {
- pr_err(" protocol %d not supported", type);
- return -EPROTONOSUPPORT;
- }
-
- spin_lock_irqsave(&st_gdata->lock, flags);
-
- if (st_gdata->list[type] == NULL) {
- pr_err(" protocol %d not registered", type);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return -EPROTONOSUPPORT;
- }
-
- st_gdata->protos_registered--;
- st_gdata->list[type] = NULL;
-
- /* kim ignores BT in the below function
- * and handles the rest, BT is toggled
- * only in kim_start and kim_stop
- */
- st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
-
- if ((st_gdata->protos_registered == ST_EMPTY) &&
- (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
- pr_info(" all protocols unregistered ");
-
- /* stop traffic on tty */
- if (st_gdata->tty) {
- tty_ldisc_flush(st_gdata->tty);
- stop_tty(st_gdata->tty);
- }
-
- /* all protocols now unregistered */
- st_kim_stop(st_gdata->kim_data);
- /* disable ST LL */
- st_ll_disable(st_gdata);
- }
- return err;
-}
-
-/*
- * called in protocol stack drivers
- * via the write function pointer
- */
-long st_write(struct sk_buff *skb)
-{
- struct st_data_s *st_gdata;
-#ifdef DEBUG
- enum proto_type protoid = ST_MAX;
-#endif
- long len;
-
- st_kim_ref(&st_gdata, 0);
- if (unlikely(skb == NULL || st_gdata == NULL
- || st_gdata->tty == NULL)) {
- pr_err("data/tty unavailable to perform write");
- return -1;
- }
-#ifdef DEBUG /* open-up skb to read the 1st byte */
- switch (skb->data[0]) {
- case HCI_COMMAND_PKT:
- case HCI_ACLDATA_PKT:
- case HCI_SCODATA_PKT:
- protoid = ST_BT;
- break;
- case ST_FM_CH8_PKT:
- protoid = ST_FM;
- break;
- case 0x09:
- protoid = ST_GPS;
- break;
- }
- if (unlikely(st_gdata->list[protoid] == NULL)) {
- pr_err(" protocol %d not registered, and writing? ",
- protoid);
- return -1;
- }
-#endif
- pr_debug("%d to be written", skb->len);
- len = skb->len;
-
- /* st_ll to decide where to enqueue the skb */
- st_int_enqueue(st_gdata, skb);
- /* wake up */
- st_tx_wakeup(st_gdata);
-
- /* return number of bytes written */
- return len;
-}
-
-/* for protocols making use of shared transport */
-EXPORT_SYMBOL_GPL(st_unregister);
-
-/********************************************************************/
-/*
- * functions called from TTY layer
- */
-static int st_tty_open(struct tty_struct *tty)
-{
- int err = 0;
- struct st_data_s *st_gdata;
- pr_info("%s ", __func__);
-
- st_kim_ref(&st_gdata, 0);
- st_gdata->tty = tty;
- tty->disc_data = st_gdata;
-
- /* don't do an wakeup for now */
- clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
- /* mem already allocated
- */
- tty->receive_room = 65536;
- /* Flush any pending characters in the driver and discipline. */
- tty_ldisc_flush(tty);
- tty_driver_flush_buffer(tty);
- /*
- * signal to UIM via KIM that -
- * installation of N_TI_WL ldisc is complete
- */
- st_kim_complete(st_gdata->kim_data);
- pr_debug("done %s", __func__);
- return err;
-}
-
-static void st_tty_close(struct tty_struct *tty)
-{
- unsigned char i = ST_MAX;
- unsigned long flags = 0;
- struct st_data_s *st_gdata = tty->disc_data;
-
- pr_info("%s ", __func__);
-
- /* TODO:
- * if a protocol has been registered & line discipline
- * un-installed for some reason - what should be done ?
- */
- spin_lock_irqsave(&st_gdata->lock, flags);
- for (i = ST_BT; i < ST_MAX; i++) {
- if (st_gdata->list[i] != NULL)
- pr_err("%d not un-registered", i);
- st_gdata->list[i] = NULL;
- }
- st_gdata->protos_registered = 0;
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- /*
- * signal to UIM via KIM that -
- * N_TI_WL ldisc is un-installed
- */
- st_kim_complete(st_gdata->kim_data);
- st_gdata->tty = NULL;
- /* Flush any pending characters in the driver and discipline. */
- tty_ldisc_flush(tty);
- tty_driver_flush_buffer(tty);
-
- spin_lock_irqsave(&st_gdata->lock, flags);
- /* empty out txq and tx_waitq */
- skb_queue_purge(&st_gdata->txq);
- skb_queue_purge(&st_gdata->tx_waitq);
- /* reset the TTY Rx states of ST */
- st_gdata->rx_count = 0;
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- kfree_skb(st_gdata->rx_skb);
- st_gdata->rx_skb = NULL;
- spin_unlock_irqrestore(&st_gdata->lock, flags);
-
- pr_debug("%s: done ", __func__);
-}
-
-static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
- char *tty_flags, int count)
-{
-
-#ifdef VERBOSE
- print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
- 16, 1, data, count, 0);
-#endif
-
- /*
- * if fw download is in progress then route incoming data
- * to KIM for validation
- */
- st_recv(tty->disc_data, data, count);
- pr_debug("done %s", __func__);
-}
-
-/* wake-up function called in from the TTY layer
- * inside the internal wakeup function will be called
- */
-static void st_tty_wakeup(struct tty_struct *tty)
-{
- struct st_data_s *st_gdata = tty->disc_data;
- pr_debug("%s ", __func__);
- /* don't do an wakeup for now */
- clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
- /* call our internal wakeup */
- st_tx_wakeup((void *)st_gdata);
-}
-
-static void st_tty_flush_buffer(struct tty_struct *tty)
-{
- struct st_data_s *st_gdata = tty->disc_data;
- pr_debug("%s ", __func__);
-
- kfree_skb(st_gdata->tx_skb);
- st_gdata->tx_skb = NULL;
-
- tty->ops->flush_buffer(tty);
- return;
-}
-
-/********************************************************************/
-int st_core_init(struct st_data_s **core_data)
-{
- struct st_data_s *st_gdata;
- long err;
- static struct tty_ldisc_ops *st_ldisc_ops;
-
- /* populate and register to TTY line discipline */
- st_ldisc_ops = kzalloc(sizeof(*st_ldisc_ops), GFP_KERNEL);
- if (!st_ldisc_ops) {
- pr_err("no mem to allocate");
- return -ENOMEM;
- }
-
- st_ldisc_ops->magic = TTY_LDISC_MAGIC;
- st_ldisc_ops->name = "n_st"; /*"n_hci"; */
- st_ldisc_ops->open = st_tty_open;
- st_ldisc_ops->close = st_tty_close;
- st_ldisc_ops->receive_buf = st_tty_receive;
- st_ldisc_ops->write_wakeup = st_tty_wakeup;
- st_ldisc_ops->flush_buffer = st_tty_flush_buffer;
- st_ldisc_ops->owner = THIS_MODULE;
-
- err = tty_register_ldisc(N_TI_WL, st_ldisc_ops);
- if (err) {
- pr_err("error registering %d line discipline %ld",
- N_TI_WL, err);
- kfree(st_ldisc_ops);
- return err;
- }
- pr_debug("registered n_shared line discipline");
-
- st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL);
- if (!st_gdata) {
- pr_err("memory allocation failed");
- err = tty_unregister_ldisc(N_TI_WL);
- if (err)
- pr_err("unable to un-register ldisc %ld", err);
- kfree(st_ldisc_ops);
- err = -ENOMEM;
- return err;
- }
-
- /* Initialize ST TxQ and Tx waitQ queue head. All BT/FM/GPS module skb's
- * will be pushed in this queue for actual transmission.
- */
- skb_queue_head_init(&st_gdata->txq);
- skb_queue_head_init(&st_gdata->tx_waitq);
-
- /* Locking used in st_int_enqueue() to avoid multiple execution */
- spin_lock_init(&st_gdata->lock);
-
- /* ldisc_ops ref to be only used in __exit of module */
- st_gdata->ldisc_ops = st_ldisc_ops;
-
-#if 0
- err = st_kim_init();
- if (err) {
- pr_err("error during kim initialization(%ld)", err);
- kfree(st_gdata);
- err = tty_unregister_ldisc(N_TI_WL);
- if (err)
- pr_err("unable to un-register ldisc");
- kfree(st_ldisc_ops);
- return -1;
- }
-#endif
-
- err = st_ll_init(st_gdata);
- if (err) {
- pr_err("error during st_ll initialization(%ld)", err);
- kfree(st_gdata);
- err = tty_unregister_ldisc(N_TI_WL);
- if (err)
- pr_err("unable to un-register ldisc");
- kfree(st_ldisc_ops);
- return -1;
- }
- *core_data = st_gdata;
- return 0;
-}
-
-void st_core_exit(struct st_data_s *st_gdata)
-{
- long err;
- /* internal module cleanup */
- err = st_ll_deinit(st_gdata);
- if (err)
- pr_err("error during deinit of ST LL %ld", err);
-#if 0
- err = st_kim_deinit();
- if (err)
- pr_err("error during deinit of ST KIM %ld", err);
-#endif
- if (st_gdata != NULL) {
- /* Free ST Tx Qs and skbs */
- skb_queue_purge(&st_gdata->txq);
- skb_queue_purge(&st_gdata->tx_waitq);
- kfree_skb(st_gdata->rx_skb);
- kfree_skb(st_gdata->tx_skb);
- /* TTY ldisc cleanup */
- err = tty_unregister_ldisc(N_TI_WL);
- if (err)
- pr_err("unable to un-register ldisc %ld", err);
- kfree(st_gdata->ldisc_ops);
- /* free the global data pointer */
- kfree(st_gdata);
- }
-}
-
-
diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c
deleted file mode 100644
index 372a996..0000000
--- a/drivers/staging/ti-st/st_kim.c
+++ /dev/null
@@ -1,797 +0,0 @@
-/*
- * Shared Transport Line discipline driver Core
- * Init Manager module responsible for GPIO control
- * and firmware download
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#define pr_fmt(fmt) "(stk) :" fmt
-#include <linux/platform_device.h>
-#include <linux/jiffies.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
-#include <linux/gpio.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/sched.h>
-#include <linux/rfkill.h>
-
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
-#include <linux/ti_wilink_st.h>
-
-
-static int kim_probe(struct platform_device *pdev);
-static int kim_remove(struct platform_device *pdev);
-
-/* KIM platform device driver structure */
-static struct platform_driver kim_platform_driver = {
- .probe = kim_probe,
- .remove = kim_remove,
- /* TODO: ST driver power management during suspend/resume ?
- */
-#if 0
- .suspend = kim_suspend,
- .resume = kim_resume,
-#endif
- .driver = {
- .name = "kim",
- .owner = THIS_MODULE,
- },
-};
-
-static int kim_toggle_radio(void*, bool);
-static const struct rfkill_ops kim_rfkill_ops = {
- .set_block = kim_toggle_radio,
-};
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name) name
-const unsigned char *protocol_names[] = {
- PROTO_ENTRY(ST_BT, "Bluetooth"),
- PROTO_ENTRY(ST_FM, "FM"),
- PROTO_ENTRY(ST_GPS, "GPS"),
-};
-
-#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
-struct platform_device *st_kim_devices[MAX_ST_DEVICES];
-
-/**********************************************************************/
-/* internal functions */
-
-/**
- * st_get_plat_device -
- * function which returns the reference to the platform device
- * requested by id. As of now only 1 such device exists (id=0)
- * the context requesting for reference can get the id to be
- * requested by a. The protocol driver which is registering or
- * b. the tty device which is opened.
- */
-static struct platform_device *st_get_plat_device(int id)
-{
- return st_kim_devices[id];
-}
-
-/**
- * validate_firmware_response -
- * function to return whether the firmware response was proper
- * in case of error don't complete so that waiting for proper
- * response times out
- */
-void validate_firmware_response(struct kim_data_s *kim_gdata)
-{
- struct sk_buff *skb = kim_gdata->rx_skb;
- if (unlikely(skb->data[5] != 0)) {
- pr_err("no proper response during fw download");
- pr_err("data6 %x", skb->data[5]);
- return; /* keep waiting for the proper response */
- }
- /* becos of all the script being downloaded */
- complete_all(&kim_gdata->kim_rcvd);
- kfree_skb(skb);
-}
-
-/* check for data len received inside kim_int_recv
- * most often hit the last case to update state to waiting for data
- */
-static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
-{
- register int room = skb_tailroom(kim_gdata->rx_skb);
-
- pr_debug("len %d room %d", len, room);
-
- if (!len) {
- validate_firmware_response(kim_gdata);
- } else if (len > room) {
- /* Received packet's payload length is larger.
- * We can't accommodate it in created skb.
- */
- pr_err("Data length is too large len %d room %d", len,
- room);
- kfree_skb(kim_gdata->rx_skb);
- } else {
- /* Packet header has non-zero payload length and
- * we have enough space in created skb. Lets read
- * payload data */
- kim_gdata->rx_state = ST_BT_W4_DATA;
- kim_gdata->rx_count = len;
- return len;
- }
-
- /* Change ST LL state to continue to process next
- * packet */
- kim_gdata->rx_state = ST_W4_PACKET_TYPE;
- kim_gdata->rx_skb = NULL;
- kim_gdata->rx_count = 0;
-
- return 0;
-}
-
-/**
- * kim_int_recv - receive function called during firmware download
- * firmware download responses on different UART drivers
- * have been observed to come in bursts of different
- * tty_receive and hence the logic
- */
-void kim_int_recv(struct kim_data_s *kim_gdata,
- const unsigned char *data, long count)
-{
- register char *ptr;
- struct hci_event_hdr *eh;
- register int len = 0, type = 0;
-
- pr_debug("%s", __func__);
- /* Decode received bytes here */
- ptr = (char *)data;
- if (unlikely(ptr == NULL)) {
- pr_err(" received null from TTY ");
- return;
- }
- while (count) {
- if (kim_gdata->rx_count) {
- len = min_t(unsigned int, kim_gdata->rx_count, count);
- memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
- kim_gdata->rx_count -= len;
- count -= len;
- ptr += len;
-
- if (kim_gdata->rx_count)
- continue;
-
- /* Check ST RX state machine , where are we? */
- switch (kim_gdata->rx_state) {
- /* Waiting for complete packet ? */
- case ST_BT_W4_DATA:
- pr_debug("Complete pkt received");
- validate_firmware_response(kim_gdata);
- kim_gdata->rx_state = ST_W4_PACKET_TYPE;
- kim_gdata->rx_skb = NULL;
- continue;
- /* Waiting for Bluetooth event header ? */
- case ST_BT_W4_EVENT_HDR:
- eh = (struct hci_event_hdr *)kim_gdata->
- rx_skb->data;
- pr_debug("Event header: evt 0x%2.2x"
- "plen %d", eh->evt, eh->plen);
- kim_check_data_len(kim_gdata, eh->plen);
- continue;
- } /* end of switch */
- } /* end of if rx_state */
- switch (*ptr) {
- /* Bluetooth event packet? */
- case HCI_EVENT_PKT:
- pr_info("Event packet");
- kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
- kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
- type = HCI_EVENT_PKT;
- break;
- default:
- pr_info("unknown packet");
- ptr++;
- count--;
- continue;
- }
- ptr++;
- count--;
- kim_gdata->rx_skb =
- bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!kim_gdata->rx_skb) {
- pr_err("can't allocate mem for new packet");
- kim_gdata->rx_state = ST_W4_PACKET_TYPE;
- kim_gdata->rx_count = 0;
- return;
- }
- bt_cb(kim_gdata->rx_skb)->pkt_type = type;
- }
- pr_info("done %s", __func__);
- return;
-}
-
-static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
-{
- unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
- char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
-
- pr_debug("%s", __func__);
-
- INIT_COMPLETION(kim_gdata->kim_rcvd);
- if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
- pr_err("kim: couldn't write 4 bytes");
- return -1;
- }
-
- if (!wait_for_completion_timeout
- (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
- pr_err(" waiting for ver info- timed out ");
- return -1;
- }
-
- version =
- MAKEWORD(kim_gdata->resp_buffer[13],
- kim_gdata->resp_buffer[14]);
- chip = (version & 0x7C00) >> 10;
- min_ver = (version & 0x007F);
- maj_ver = (version & 0x0380) >> 7;
-
- if (version & 0x8000)
- maj_ver |= 0x0008;
-
- sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
-
- /* to be accessed later via sysfs entry */
- kim_gdata->version.full = version;
- kim_gdata->version.chip = chip;
- kim_gdata->version.maj_ver = maj_ver;
- kim_gdata->version.min_ver = min_ver;
-
- pr_info("%s", bts_scr_name);
- return 0;
-}
-
-/**
- * download_firmware -
- * internal function which parses through the .bts firmware
- * script file intreprets SEND, DELAY actions only as of now
- */
-static long download_firmware(struct kim_data_s *kim_gdata)
-{
- long err = 0;
- long len = 0;
- register unsigned char *ptr = NULL;
- register unsigned char *action_ptr = NULL;
- unsigned char bts_scr_name[30] = { 0 }; /* 30 char long bts scr name? */
-
- err = read_local_version(kim_gdata, bts_scr_name);
- if (err != 0) {
- pr_err("kim: failed to read local ver");
- return err;
- }
- err =
- request_firmware(&kim_gdata->fw_entry, bts_scr_name,
- &kim_gdata->kim_pdev->dev);
- if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
- (kim_gdata->fw_entry->size == 0))) {
- pr_err(" request_firmware failed(errno %ld) for %s", err,
- bts_scr_name);
- return -1;
- }
- ptr = (void *)kim_gdata->fw_entry->data;
- len = kim_gdata->fw_entry->size;
- /* bts_header to remove out magic number and
- * version
- */
- ptr += sizeof(struct bts_header);
- len -= sizeof(struct bts_header);
-
- while (len > 0 && ptr) {
- pr_debug(" action size %d, type %d ",
- ((struct bts_action *)ptr)->size,
- ((struct bts_action *)ptr)->type);
-
- switch (((struct bts_action *)ptr)->type) {
- case ACTION_SEND_COMMAND: /* action send */
- action_ptr = &(((struct bts_action *)ptr)->data[0]);
- if (unlikely
- (((struct hci_command *)action_ptr)->opcode ==
- 0xFF36)) {
- /* ignore remote change
- * baud rate HCI VS command */
- pr_err
- (" change remote baud"
- " rate command in firmware");
- break;
- }
-
- INIT_COMPLETION(kim_gdata->kim_rcvd);
- err = st_int_write(kim_gdata->core_data,
- ((struct bts_action_send *)action_ptr)->data,
- ((struct bts_action *)ptr)->size);
- if (unlikely(err < 0)) {
- release_firmware(kim_gdata->fw_entry);
- return -1;
- }
- if (!wait_for_completion_timeout
- (&kim_gdata->kim_rcvd,
- msecs_to_jiffies(CMD_RESP_TIME))) {
- pr_err
- (" response timeout during fw download ");
- /* timed out */
- release_firmware(kim_gdata->fw_entry);
- return -1;
- }
- break;
- case ACTION_DELAY: /* sleep */
- pr_info("sleep command in scr");
- action_ptr = &(((struct bts_action *)ptr)->data[0]);
- mdelay(((struct bts_action_delay *)action_ptr)->msec);
- break;
- }
- len =
- len - (sizeof(struct bts_action) +
- ((struct bts_action *)ptr)->size);
- ptr =
- ptr + sizeof(struct bts_action) +
- ((struct bts_action *)ptr)->size;
- }
- /* fw download complete */
- release_firmware(kim_gdata->fw_entry);
- return 0;
-}
-
-/**********************************************************************/
-/* functions called from ST core */
-/* function to toggle the GPIO
- * needs to know whether the GPIO is active high or active low
- */
-void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
-{
- struct platform_device *kim_pdev;
- struct kim_data_s *kim_gdata;
- pr_info(" %s ", __func__);
-
- kim_pdev = st_get_plat_device(0);
- kim_gdata = dev_get_drvdata(&kim_pdev->dev);
-
- if (kim_gdata->gpios[type] == -1) {
- pr_info(" gpio not requested for protocol %s",
- protocol_names[type]);
- return;
- }
- switch (type) {
- case ST_BT:
- /*Do Nothing */
- break;
-
- case ST_FM:
- if (state == KIM_GPIO_ACTIVE)
- gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
- else
- gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
- break;
-
- case ST_GPS:
- if (state == KIM_GPIO_ACTIVE)
- gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
- else
- gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
- break;
-
- case ST_MAX:
- default:
- break;
- }
-
- return;
-}
-
-/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
- * can be because of
- * 1. response to read local version
- * 2. during send/recv's of firmware download
- */
-void st_kim_recv(void *disc_data, const unsigned char *data, long count)
-{
- struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
- struct kim_data_s *kim_gdata = st_gdata->kim_data;
-
- pr_info(" %s ", __func__);
- /* copy to local buffer */
- if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
- /* must be the read_ver_cmd */
- memcpy(kim_gdata->resp_buffer, data, count);
- complete_all(&kim_gdata->kim_rcvd);
- return;
- } else {
- kim_int_recv(kim_gdata, data, count);
- /* either completes or times out */
- }
- return;
-}
-
-/* to signal completion of line discipline installation
- * called from ST Core, upon tty_open
- */
-void st_kim_complete(void *kim_data)
-{
- struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
- complete(&kim_gdata->ldisc_installed);
-}
-
-/**
- * st_kim_start - called from ST Core upon 1st registration
- * This involves toggling the chip enable gpio, reading
- * the firmware version from chip, forming the fw file name
- * based on the chip version, requesting the fw, parsing it
- * and perform download(send/recv).
- */
-long st_kim_start(void *kim_data)
-{
- long err = 0;
- long retry = POR_RETRY_COUNT;
- struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
-
- pr_info(" %s", __func__);
-
- do {
- /* TODO: this is only because rfkill sub-system
- * doesn't send events to user-space if the state
- * isn't changed
- */
- rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
- /* Configure BT nShutdown to HIGH state */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
- mdelay(5); /* FIXME: a proper toggle */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
- mdelay(100);
- /* re-initialize the completion */
- INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
- /* send signal to UIM */
- err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
- if (err != 0) {
- pr_info(" sending SIGUSR2 to uim failed %ld", err);
- err = -1;
- continue;
- }
-#endif
- /* unblock and send event to UIM via /dev/rfkill */
- rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
- /* wait for ldisc to be installed */
- err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
- msecs_to_jiffies(LDISC_TIME));
- if (!err) { /* timeout */
- pr_err("line disc installation timed out ");
- err = -1;
- continue;
- } else {
- /* ldisc installed now */
- pr_info(" line discipline installed ");
- err = download_firmware(kim_gdata);
- if (err != 0) {
- pr_err("download firmware failed");
- continue;
- } else { /* on success don't retry */
- break;
- }
- }
- } while (retry--);
- return err;
-}
-
-/**
- * st_kim_stop - called from ST Core, on the last un-registration
- * toggle low the chip enable gpio
- */
-long st_kim_stop(void *kim_data)
-{
- long err = 0;
- struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
-
- INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
- /* send signal to UIM */
- err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
- if (err != 0) {
- pr_err("sending SIGUSR2 to uim failed %ld", err);
- return -1;
- }
-#endif
- /* set BT rfkill to be blocked */
- err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
-
- /* wait for ldisc to be un-installed */
- err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
- msecs_to_jiffies(LDISC_TIME));
- if (!err) { /* timeout */
- pr_err(" timed out waiting for ldisc to be un-installed");
- return -1;
- }
-
- /* By default configure BT nShutdown to LOW state */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
- mdelay(1);
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
- mdelay(1);
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
- return err;
-}
-
-/**********************************************************************/
-/* functions called from subsystems */
-/* called when debugfs entry is read from */
-
-static int show_version(struct seq_file *s, void *unused)
-{
- struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
- seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
- kim_gdata->version.chip, kim_gdata->version.maj_ver,
- kim_gdata->version.min_ver);
- return 0;
-}
-
-static int show_list(struct seq_file *s, void *unused)
-{
- struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
- kim_st_list_protocols(kim_gdata->core_data, s);
- return 0;
-}
-
-/* function called from rfkill subsystem, when someone from
- * user space would write 0/1 on the sysfs entry
- * /sys/class/rfkill/rfkill0,1,3/state
- */
-static int kim_toggle_radio(void *data, bool blocked)
-{
- enum proto_type type = *((enum proto_type *)data);
- pr_debug(" %s: %d ", __func__, type);
-
- switch (type) {
- case ST_BT:
- /* do nothing */
- break;
- case ST_FM:
- case ST_GPS:
- if (blocked)
- st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
- else
- st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
- break;
- case ST_MAX:
- pr_err(" wrong proto type ");
- break;
- }
- return 0;
-}
-
-/**
- * st_kim_ref - reference the core's data
- * This references the per-ST platform device in the arch/xx/
- * board-xx.c file.
- * This would enable multiple such platform devices to exist
- * on a given platform
- */
-void st_kim_ref(struct st_data_s **core_data, int id)
-{
- struct platform_device *pdev;
- struct kim_data_s *kim_gdata;
- /* get kim_gdata reference from platform device */
- pdev = st_get_plat_device(id);
- kim_gdata = dev_get_drvdata(&pdev->dev);
- *core_data = kim_gdata->core_data;
-}
-
-static int kim_version_open(struct inode *i, struct file *f)
-{
- return single_open(f, show_version, i->i_private);
-}
-
-static int kim_list_open(struct inode *i, struct file *f)
-{
- return single_open(f, show_list, i->i_private);
-}
-
-static const struct file_operations version_debugfs_fops = {
- /* version info */
- .open = kim_version_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-static const struct file_operations list_debugfs_fops = {
- /* protocols info */
- .open = kim_list_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/**********************************************************************/
-/* functions called from platform device driver subsystem
- * need to have a relevant platform device entry in the platform's
- * board-*.c file
- */
-
-struct dentry *kim_debugfs_dir;
-static int kim_probe(struct platform_device *pdev)
-{
- long status;
- long proto;
- long *gpios = pdev->dev.platform_data;
- struct kim_data_s *kim_gdata;
-
- if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
- /* multiple devices could exist */
- st_kim_devices[pdev->id] = pdev;
- } else {
- /* platform's sure about existance of 1 device */
- st_kim_devices[0] = pdev;
- }
-
- kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
- if (!kim_gdata) {
- pr_err("no mem to allocate");
- return -ENOMEM;
- }
- dev_set_drvdata(&pdev->dev, kim_gdata);
-
- status = st_core_init(&kim_gdata->core_data);
- if (status != 0) {
- pr_err(" ST core init failed");
- return -1;
- }
- /* refer to itself */
- kim_gdata->core_data->kim_data = kim_gdata;
-
- for (proto = 0; proto < ST_MAX; proto++) {
- kim_gdata->gpios[proto] = gpios[proto];
- pr_info(" %ld gpio to be requested", gpios[proto]);
- }
-
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* Claim the Bluetooth/FM/GPIO
- * nShutdown gpio from the system
- */
- status = gpio_request(gpios[proto], "kim");
- if (unlikely(status)) {
- pr_err(" gpio %ld request failed ", gpios[proto]);
- proto -= 1;
- while (proto >= 0) {
- if (gpios[proto] != -1)
- gpio_free(gpios[proto]);
- }
- return status;
- }
-
- /* Configure nShutdown GPIO as output=0 */
- status =
- gpio_direction_output(gpios[proto], 0);
- if (unlikely(status)) {
- pr_err(" unable to configure gpio %ld",
- gpios[proto]);
- proto -= 1;
- while (proto >= 0) {
- if (gpios[proto] != -1)
- gpio_free(gpios[proto]);
- }
- return status;
- }
- }
- /* get reference of pdev for request_firmware
- */
- kim_gdata->kim_pdev = pdev;
- init_completion(&kim_gdata->kim_rcvd);
- init_completion(&kim_gdata->ldisc_installed);
-
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* TODO: should all types be rfkill_type_bt ? */
- kim_gdata->rf_protos[proto] = proto;
- kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
- &pdev->dev, RFKILL_TYPE_BLUETOOTH,
- &kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
- if (kim_gdata->rfkill[proto] == NULL) {
- pr_err("cannot create rfkill entry for gpio %ld",
- gpios[proto]);
- continue;
- }
- /* block upon creation */
- rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
- status = rfkill_register(kim_gdata->rfkill[proto]);
- if (unlikely(status)) {
- pr_err("rfkill registration failed for gpio %ld",
- gpios[proto]);
- rfkill_unregister(kim_gdata->rfkill[proto]);
- continue;
- }
- pr_info("rfkill entry created for %ld", gpios[proto]);
- }
-
- kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
- if (IS_ERR(kim_debugfs_dir)) {
- pr_err(" debugfs entries creation failed ");
- kim_debugfs_dir = NULL;
- return -1;
- }
-
- debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
- kim_gdata, &version_debugfs_fops);
- debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
- kim_gdata, &list_debugfs_fops);
- pr_info(" debugfs entries created ");
- return 0;
-}
-
-static int kim_remove(struct platform_device *pdev)
-{
- /* free the GPIOs requested
- */
- long *gpios = pdev->dev.platform_data;
- long proto;
- struct kim_data_s *kim_gdata;
-
- kim_gdata = dev_get_drvdata(&pdev->dev);
-
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* Claim the Bluetooth/FM/GPIO
- * nShutdown gpio from the system
- */
- gpio_free(gpios[proto]);
- rfkill_unregister(kim_gdata->rfkill[proto]);
- rfkill_destroy(kim_gdata->rfkill[proto]);
- kim_gdata->rfkill[proto] = NULL;
- }
- pr_info("kim: GPIO Freed");
- debugfs_remove_recursive(kim_debugfs_dir);
- kim_gdata->kim_pdev = NULL;
- st_core_exit(kim_gdata->core_data);
-
- kfree(kim_gdata);
- kim_gdata = NULL;
- return 0;
-}
-
-/**********************************************************************/
-/* entry point for ST KIM module, called in from ST Core */
-
-static int __init st_kim_init(void)
-{
- long ret = 0;
- ret = platform_driver_register(&kim_platform_driver);
- if (ret != 0) {
- pr_err("platform drv registration failed");
- return -1;
- }
- return 0;
-}
-
-static void __exit st_kim_deinit(void)
-{
- /* the following returns void */
- platform_driver_unregister(&kim_platform_driver);
-}
-
-
-module_init(st_kim_init);
-module_exit(st_kim_deinit);
-MODULE_AUTHOR("Pavan Savoy <pavan_savoy at ti.com>");
-MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/ti-st/st_ll.c b/drivers/staging/ti-st/st_ll.c
deleted file mode 100644
index ed1e4bc..0000000
--- a/drivers/staging/ti-st/st_ll.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Shared Transport driver
- * HCI-LL module responsible for TI proprietary HCI_LL protocol
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#define pr_fmt(fmt) "(stll) :" fmt
-#include <linux/skbuff.h>
-#include <linux/module.h>
-#include <linux/ti_wilink_st.h>
-
-/**********************************************************************/
-/* internal functions */
-static void send_ll_cmd(struct st_data_s *st_data,
- unsigned char cmd)
-{
-
- pr_info("%s: writing %x", __func__, cmd);
- st_int_write(st_data, &cmd, 1);
- return;
-}
-
-static void ll_device_want_to_sleep(struct st_data_s *st_data)
-{
- pr_debug("%s", __func__);
- /* sanity check */
- if (st_data->ll_state != ST_LL_AWAKE)
- pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
- "in state %ld", st_data->ll_state);
-
- send_ll_cmd(st_data, LL_SLEEP_ACK);
- /* update state */
- st_data->ll_state = ST_LL_ASLEEP;
-}
-
-static void ll_device_want_to_wakeup(struct st_data_s *st_data)
-{
- /* diff actions in diff states */
- switch (st_data->ll_state) {
- case ST_LL_ASLEEP:
- send_ll_cmd(st_data, LL_WAKE_UP_ACK); /* send wake_ack */
- break;
- case ST_LL_ASLEEP_TO_AWAKE:
- /* duplicate wake_ind */
- pr_err("duplicate wake_ind while waiting for Wake ack");
- break;
- case ST_LL_AWAKE:
- /* duplicate wake_ind */
- pr_err("duplicate wake_ind already AWAKE");
- break;
- case ST_LL_AWAKE_TO_ASLEEP:
- /* duplicate wake_ind */
- pr_err("duplicate wake_ind");
- break;
- }
- /* update state */
- st_data->ll_state = ST_LL_AWAKE;
-}
-
-/**********************************************************************/
-/* functions invoked by ST Core */
-
-/* called when ST Core wants to
- * enable ST LL */
-void st_ll_enable(struct st_data_s *ll)
-{
- ll->ll_state = ST_LL_AWAKE;
-}
-
-/* called when ST Core /local module wants to
- * disable ST LL */
-void st_ll_disable(struct st_data_s *ll)
-{
- ll->ll_state = ST_LL_INVALID;
-}
-
-/* called when ST Core wants to update the state */
-void st_ll_wakeup(struct st_data_s *ll)
-{
- if (likely(ll->ll_state != ST_LL_AWAKE)) {
- send_ll_cmd(ll, LL_WAKE_UP_IND); /* WAKE_IND */
- ll->ll_state = ST_LL_ASLEEP_TO_AWAKE;
- } else {
- /* don't send the duplicate wake_indication */
- pr_err(" Chip already AWAKE ");
- }
-}
-
-/* called when ST Core wants the state */
-unsigned long st_ll_getstate(struct st_data_s *ll)
-{
- pr_debug(" returning state %ld", ll->ll_state);
- return ll->ll_state;
-}
-
-/* called from ST Core, when a PM related packet arrives */
-unsigned long st_ll_sleep_state(struct st_data_s *st_data,
- unsigned char cmd)
-{
- switch (cmd) {
- case LL_SLEEP_IND: /* sleep ind */
- pr_info("sleep indication recvd");
- ll_device_want_to_sleep(st_data);
- break;
- case LL_SLEEP_ACK: /* sleep ack */
- pr_err("sleep ack rcvd: host shouldn't");
- break;
- case LL_WAKE_UP_IND: /* wake ind */
- pr_info("wake indication recvd");
- ll_device_want_to_wakeup(st_data);
- break;
- case LL_WAKE_UP_ACK: /* wake ack */
- pr_info("wake ack rcvd");
- st_data->ll_state = ST_LL_AWAKE;
- break;
- default:
- pr_err(" unknown input/state ");
- return -1;
- }
- return 0;
-}
-
-/* Called from ST CORE to initialize ST LL */
-long st_ll_init(struct st_data_s *ll)
-{
- /* set state to invalid */
- ll->ll_state = ST_LL_INVALID;
- return 0;
-}
-
-/* Called from ST CORE to de-initialize ST LL */
-long st_ll_deinit(struct st_data_s *ll)
-{
- return 0;
-}
--
1.6.5
More information about the devel
mailing list