[PATCH] [ar5523] add-Gigaset-108.patch
alwin
adr at deds.nl
Wed Nov 10 17:54:11 UTC 2010
Added ar5523 in Subject.
On Wed, 10 Nov 2010 09:56:41 +0100 I wrote:
> Hi,
>
> Thanks for this great piece of work! I recently got a "Siemens Gigaset
> USB Adapter 108" and it works with this driver.
> I had to make a small change to the USB device id, so it was detected.
>
> There's something strange with this adapter. Without the driver, lsusb
> identifies it as:
> "Bus 001 Device 004: ID 129b:160c CyberTAN Technology". If I put 160c
> into ar5523.c, the driver loads automagically when plugging in the
> adapter, but there will be an initialization timeout, and the device
> can't initialize. After the driver is loaded, lsusb identifies it as:
> "Bus 001 Device 006: ID 129b:160b CyberTAN Technology". Everything works
> fine if I put 160b into ar5523.c . I guess this must be somekind of
> harware bug/feature, because something similar happened using
> ndiswrapper (couldn't get that working anyway). There also is an "160d"
> around according to Google. I guess these are all slight variations of
> the same piece of hardware, and all are reported to work with this
> driver, so I would suggest to replace the add-Gigaset-108.patch into
> this, to cover them all:
>
> --- a/ar5523.c
> +++ b/ar5523.c
> @@ -1623,6 +1623,9 @@ static struct usb_device_id ar5523_id_ta
> AR5523_DEVICE_UX(0x0cf3, 0x0005), /* Atheros2 / AR5523_3 */
> AR5523_DEVICE_UG(0x0d8e, 0x7801), /* Conceptronic / AR5523_1 */
> AR5523_DEVICE_UX(0x0d8e, 0x7811), /* Conceptronic / AR5523_2 */
> + AR5523_DEVICE_UG(0x129b, 0x160b), /* Cybertan / GIGASET108_1 */
> + AR5523_DEVICE_UG(0x129b, 0x160c), /* Cybertan / GIGASET108_2 */
> + AR5523_DEVICE_UG(0x129b, 0x160d), /* Cybertan / GIGASET108_3 */
> AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */
> AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */
> AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */
>
>
> Kind regards,
>
>
--
[alwin]
More information about the devel
mailing list