[PATCH 2/2] Staging: comedi: fix code warnings in s626.c
John Sheehan
john.d.sheehan at gmail.com
Fri May 28 15:33:25 UTC 2010
From: John Sheehan <john.d.sheehan at gmail.com>
A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
printk() should include KERN_ facility level
unnecessary whitespace before a quoted newline
Signed-off-by: John Sheehan <john.d.sheehan at gmail.com>
---
drivers/staging/comedi/drivers/s626.c | 38 ++++++++++++++++----------------
1 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 83e1bb1..b63325c 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -543,13 +543,13 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
devpriv->pdev = pdev;
if (pdev == NULL) {
- printk("s626_attach: Board not present!!!\n");
+ printk(KERN_ERR "s626_attach: Board not present!!!\n");
return -ENODEV;
}
result = comedi_pci_enable(pdev, "s626");
if (result < 0) {
- printk("s626_attach: comedi_pci_enable fails\n");
+ printk(KERN_ERR "s626_attach: comedi_pci_enable fails\n");
return -ENODEV;
}
devpriv->got_regions = 1;
@@ -558,7 +558,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
devpriv->base_addr = ioremap(resourceStart, SIZEOF_ADDRESS_SPACE);
if (devpriv->base_addr == NULL) {
- printk("s626_attach: IOREMAP failed\n");
+ printk(KERN_ERR "s626_attach: IOREMAP failed\n");
return -ENODEV;
}
@@ -579,7 +579,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
if (devpriv->ANABuf.LogicalBase == NULL) {
- printk("s626_attach: DMA Memory mapping error\n");
+ printk(KERN_ERR "s626_attach: DMA Memory mapping error\n");
return -ENOMEM;
}
@@ -596,7 +596,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
if (devpriv->RPSBuf.LogicalBase == NULL) {
- printk("s626_attach: DMA Memory mapping error\n");
+ printk(KERN_ERR "s626_attach: DMA Memory mapping error\n");
return -ENOMEM;
}
@@ -622,18 +622,18 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* set up interrupt handler */
if (dev->irq == 0) {
- printk(" unknown irq (bad)\n");
+ printk(KERN_ERR " unknown irq (bad)\n");
} else {
ret = request_irq(dev->irq, s626_irq_handler, IRQF_SHARED,
"s626", dev);
if (ret < 0) {
- printk(" irq not available\n");
+ printk(KERN_ERR " irq not available\n");
dev->irq = 0;
}
}
- DEBUG("s626_attach: -- it opts %d,%d -- \n",
+ DEBUG("s626_attach: -- it opts %d,%d --\n",
it->options[0], it->options[1]);
s = dev->subdevices + 0;
@@ -1515,7 +1515,7 @@ void ResetADC(struct comedi_device *dev, uint8_t * ppl)
break; /* Exit poll list processing loop. */
}
}
- DEBUG("ResetADC: ADC items %d \n", devpriv->AdcItems);
+ DEBUG("ResetADC: ADC items %d\n", devpriv->AdcItems);
/* VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US. Allow the
* ADC to stabilize for 2 microseconds before starting the final
@@ -1576,7 +1576,7 @@ static int s626_ai_insn_config(struct comedi_device *dev,
/* register uint8_t i; */
/* register int32_t *readaddr; */
-/* DEBUG("as626_ai_rinsn: ai_rinsn enter \n"); */
+/* DEBUG("as626_ai_rinsn: ai_rinsn enter\n"); */
/* Trigger ADC scan loop start by setting RPS Signal 0. */
/* MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
@@ -1593,11 +1593,11 @@ static int s626_ai_insn_config(struct comedi_device *dev,
/* Convert ADC data to 16-bit integer values and copy to application buffer. */
/* for ( i = 0; i < devpriv->AdcItems; i++ ) { */
/* *data = s626_ai_reg_to_uint( *readaddr++ ); */
-/* DEBUG("s626_ai_rinsn: data %d \n",*data); */
+/* DEBUG("s626_ai_rinsn: data %d\n",*data); */
/* data++; */
/* } */
-/* DEBUG("s626_ai_rinsn: ai_rinsn escape \n"); */
+/* DEBUG("s626_ai_rinsn: ai_rinsn escape\n"); */
/* return i; */
/* } */
@@ -1747,7 +1747,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
DEBUG("s626_ai_cmd: entering command function\n");
if (devpriv->ai_cmd_running) {
- printk("s626_ai_cmd: Another ai_cmd is running %d\n",
+ printk(KERN_ERR "s626_ai_cmd: Another ai_cmd is running %d\n",
dev->minor);
return -EBUSY;
}
@@ -2151,7 +2151,7 @@ static void s626_dio_init(struct comedi_device *dev)
DEBIwrite(dev, diopriv->WRDOut, 0); /* Program all outputs */
/* to inactive state. */
}
- DEBUG("s626_dio_init: DIO initialized \n");
+ DEBUG("s626_dio_init: DIO initialized\n");
}
/* DIO devices are slightly special. Although it is possible to
@@ -2350,7 +2350,7 @@ static int s626_enc_insn_read(struct comedi_device *dev,
int n;
struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
- DEBUG("s626_enc_insn_read: encoder read channel %d \n",
+ DEBUG("s626_enc_insn_read: encoder read channel %d\n",
CR_CHAN(insn->chanspec));
for (n = 0; n < insn->n; n++)
@@ -2368,7 +2368,7 @@ static int s626_enc_insn_write(struct comedi_device *dev,
struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
- DEBUG("s626_enc_insn_write: encoder write channel %d \n",
+ DEBUG("s626_enc_insn_write: encoder write channel %d\n",
CR_CHAN(insn->chanspec));
/* Set the preload register */
@@ -3110,12 +3110,12 @@ static uint16_t GetEnable_B(struct comedi_device *dev, struct enc_private *k)
static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
uint16_t value)
{
- DEBUG("SetLatchSource: SetLatchSource enter 3550 \n");
+ DEBUG("SetLatchSource: SetLatchSource enter 3550\n");
DEBIreplace(dev, k->MyCRB,
(uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_LATCHSRC)),
(uint16_t) (value << CRBBIT_LATCHSRC));
- DEBUG("SetLatchSource: SetLatchSource exit \n");
+ DEBUG("SetLatchSource: SetLatchSource exit\n");
}
/*
@@ -3328,6 +3328,6 @@ static void CountersInit(struct comedi_device *dev)
k->ResetCapFlags(dev, k);
k->SetEnable(dev, k, CLKENAB_ALWAYS);
}
- DEBUG("CountersInit: counters initialized \n");
+ DEBUG("CountersInit: counters initialized\n");
}
--
1.7.0.4
More information about the devel
mailing list