[PATCH 516/577] Staging: wlags49: build fixes

[Greg Kroah-Hartman]

Now that the code actually gets selected in the kernel config
properly, all of the build errors start showing up.

This patch papers over a few of them to get the code to build, I have
no idea if it actually works now or not...

Cc: Henk de Groot <pe1dnn at amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/staging/wlags49_h2/dhf.c   |   10 +++++-----
 drivers/staging/wlags49_h2/wl_cs.c |   14 +++++++-------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/wlags49_h2/dhf.c b/drivers/staging/wlags49_h2/dhf.c
index d5fb1a9..80a4707 100644
--- a/drivers/staging/wlags49_h2/dhf.c
+++ b/drivers/staging/wlags49_h2/dhf.c
@@ -286,14 +286,14 @@ int				i;
 		 fw->signature[i+1] != (/* HCF_BIG_ENDIAN ? 'B' : */ 'L'))
 		rc = DHF_ERR_INCOMP_FW;
 	else {					/* Little Endian Binary format */
-		fw->codep    = (CFG_PROG_STRCT FAR*)((PSEUDO_CHARP)fw->codep + (hcf_32)fw);
-		fw->identity = (CFG_IDENTITY_STRCT FAR*)((PSEUDO_CHARP)fw->identity + (hcf_32)fw);
-		fw->compat   = (CFG_RANGE20_STRCT FAR*)((PSEUDO_CHARP)fw->compat + (hcf_32)fw);
+		fw->codep    = (CFG_PROG_STRCT FAR*)((char *)fw->codep + (hcf_32)fw);
+		fw->identity = (CFG_IDENTITY_STRCT FAR*)((char *)fw->identity + (hcf_32)fw);
+		fw->compat   = (CFG_RANGE20_STRCT FAR*)((char *)fw->compat + (hcf_32)fw);
 		for (i = 0; fw->p[i]; i++)
-			fw->p[i] = ((PSEUDO_CHARP)fw->p[i] + (hcf_32)fw);
+			fw->p[i] = ((char *)fw->p[i] + (hcf_32)fw);
 		p = fw->codep;
 		while (p->len) {
-			p->host_addr = (PSEUDO_CHARP)p->host_addr + (hcf_32)fw;
+			p->host_addr = (char *)p->host_addr + (hcf_32)fw;
 			p++;
 		}
 	}
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 9da42e6..7c33ead 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -157,14 +157,14 @@ static int wl_adapter_attach(struct pcmcia_device *link)
     link->io.Attributes1    = IO_DATA_PATH_WIDTH_16;
     link->io.IOAddrLines    = 6;
     link->irq.Attributes    = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1      = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
+//    link->irq.IRQInfo1      = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
     link->irq.Handler       = &wl_isr;
     link->conf.Attributes   = CONF_ENABLE_IRQ;
     link->conf.IntType      = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex  = 5;
     link->conf.Present      = PRESENT_OPTION;
 
-    link->priv = link->irq.Instance = dev;
+    link->priv = dev;
     lp = wl_priv(dev);
     lp->link = link;
 
@@ -317,15 +317,15 @@ void wl_adapter_insert( struct pcmcia_device *link )
     /* Do we need to allocate an interrupt? */
     link->conf.Attributes |= CONF_ENABLE_IRQ;
 
-    CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+//    CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
+//    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+//    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
 
     dev->irq        = link->irq.AssignedIRQ;
     dev->base_addr  = link->io.BasePort1;
 
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
     if (register_netdev(dev) != 0) {
 	printk("%s: register_netdev() failed\n", MODULE_NAME);
 	goto failed;
@@ -345,7 +345,7 @@ void wl_adapter_insert( struct pcmcia_device *link )
 
 
 cs_failed:
-    cs_error( link, last_fn, last_ret );
+//    cs_error( link, last_fn, last_ret );
 
 
 failed:
-- 
1.7.0.3