[PATCH] staging/comedi: fixing 8255 and DAS08 Kconfig dependancies.
Alexander Kurz
linux at blala.de
Wed May 19 19:13:19 UTC 2010
>From 64bc3d065d852f0aab308c37d7e8778f29e384f8 Mon Sep 17 00:00:00 2001
From: Alexander Kurz <linux at kbdbabel.org>
Date: Wed, 19 May 2010 20:31:20 +0200
Subject: [PATCH] staging/comedi: fixing 8255 and DAS08 Kconfig dependancies.
Both drivers support directly or indirectly multiple bus types,
hence both are listed independent of bus types.
Signed-off-by: Alexander Kurz <linux at kbdbabel.org>
---
drivers/staging/comedi/Kconfig | 78 ++++++++++++++++++++++--------
drivers/staging/comedi/drivers/Makefile | 4 +-
2 files changed, 59 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 75e060f..ebc68ee 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -100,15 +100,6 @@ menuconfig COMEDI_ISA_DRIVERS
if COMEDI_ISA_DRIVERS && ISA
-config COMEDI_8255
- tristate "Generic 8255 support"
- default N
- ---help---
- Enable generic 8255 support.
-
- To compile this driver as a module, choose M here: the module will be
- called 8255.
-
config COMEDI_ACL7225B
tristate "ADlink NuDAQ ACL-7225b and compatibles support"
default N
@@ -130,6 +121,7 @@ config COMEDI_PCL711
config COMEDI_PCL724
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCL-724, PCL-722, PCL-731 and
@@ -198,6 +190,7 @@ config COMEDI_PCL818
config COMEDI_PCM3724
tristate "Advantech PCM-3724 PC/104 card support"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCM-3724 PC/104 cards.
@@ -232,18 +225,9 @@ config COMEDI_RTI802
To compile this driver as a module, choose M here: the module will be
called rti802.
-config COMEDI_DAS08
- tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support"
- default N
- ---help---
- Enable support for Keithley Metrabyte/ComputerBoards DAS08
- and compatible ISA and PC/104 cards
-
- To compile this driver as a module, choose M here: the module will be
- called das08.
-
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -254,6 +238,7 @@ config COMEDI_DAS16M1
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -385,6 +370,7 @@ config COMEDI_FL512
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
+ select COMEDI_8255
default N
---help---
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -466,6 +452,7 @@ config COMEDI_NI_ATMIO
config COMEDI_NI_ATMIO16D
tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
depends on ISAPNP && COMEDI_NI_COMMON
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
@@ -667,6 +654,7 @@ config COMEDI_ADDI_APCI_3XXX
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
+ select COMEDI_8255
default N
---help---
Enable support for ADLink PCI-6208A cards
@@ -742,6 +730,7 @@ config COMEDI_ADV_PCI1723
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCI DIO cards
@@ -753,6 +742,7 @@ config COMEDI_ADV_PCI_DIO
config COMEDI_AMPLC_DIO200
tristate "Amplicon PC272E and PCI272 DIO board support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PC272E and PCI272 DIO boards
@@ -762,6 +752,7 @@ config COMEDI_AMPLC_DIO200
config COMEDI_AMPLC_PC236
tristate "Amplicon PC36AT and PCI236 DIO board support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PC36AT and PCI236 DIO boards
@@ -790,6 +781,7 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -860,6 +852,7 @@ config COMEDI_II_PCI20KC
config COMEDI_DAQBOARD2000
tristate "IOtech DAQboard/2000 support"
+ select COMEDI_8255
default N
---help---
Enable support for the IOtech DAQboard/2000
@@ -887,6 +880,7 @@ config COMEDI_KE_COUNTER
config COMEDI_CB_PCIDAS64
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -898,6 +892,7 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -911,6 +906,7 @@ config COMEDI_CB_PCIDAS
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -922,6 +918,7 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIDIO
tristate "MeasurementComputing PCI-DIO series support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
@@ -932,6 +929,7 @@ config COMEDI_CB_PCIDIO
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16 support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -942,6 +940,7 @@ config COMEDI_CB_PCIMDAS
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -1017,6 +1016,7 @@ config COMEDI_NI_670X
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
depends on COMEDI_MITE
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
@@ -1049,6 +1049,7 @@ config COMEDI_NI_PCIMIO
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
+ select COMEDI_8255
default N
---help---
Enable support for Real Time Devices PCI4520/DM7520
@@ -1088,7 +1089,7 @@ endif # COMEDI_PCI_DRIVERS
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
- depends on COMEDI && PCMCIA && PCCARD
+ depends on COMEDI && (PCMCIA || PCCARD)
default N
---help---
Enable comedi PCMCIA and PCCARD drivers to be built
@@ -1133,6 +1134,7 @@ config COMEDI_NI_DAQ_700_CS
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
depends on COMEDI_NI_COMMON
+ select COMEDI_8255
default N
---help---
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1153,8 +1155,8 @@ config COMEDI_NI_LABPC_CS
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
- default N
select COMEDI_FC
+ default N
---help---
Enable support for the National Instruments PCMCIA DAQCard E series
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
@@ -1256,6 +1258,7 @@ config COMEDI_MITE
config COMEDI_NI_TIO
tristate "NI general purpose counter support"
+ select COMEDI_8255
select COMEDI_MITE
default N
---help---
@@ -1269,6 +1272,7 @@ config COMEDI_NI_TIO
config COMEDI_NI_LABPC
tristate "NI Lab-PC and compatibles ISA and PCI support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -1282,8 +1286,40 @@ config COMEDI_NI_LABPC
endif # COMEDI_NI_COMMON
+config COMEDI_8255
+ tristate "Generic 8255 support"
+ depends on COMEDI
+ default N
+ ---help---
+ Enable generic 8255 support.
+
+ You should enable compilation this driver if you plan to use a board
+ that has an 8255 chip. For multifunction boards, the main driver will
+ configure the 8255 subdevice automatically.
+
+ Note that most PCI 8255 boards do NOT work with this driver, and
+ need a separate driver as a wrapper.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 8255.
+
+config COMEDI_DAS08
+ tristate "DAS-08 compatible support"
+ depends on COMEDI
+ select COMEDI_8255
+ default N
+ ---help---
+ Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
+
+ Note that PCMCIA DAS08 cards are not directly supported by this
+ driver, and need a separate driver as a wrapper.
+
+ To compile this driver as a module, choose M here: the module will be
+ called das08.
+
config COMEDI_FC
tristate "Comedi shared functions for low-level driver support"
+ depends on COMEDI
default N
---help---
Enable support for shared functions for low-level drivers.
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 3880b5a..1b58ed0 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_COMEDI_SERIAL2002) += serial2002.o
obj-$(CONFIG_COMEDI_SKEL) += skel.o
# Comedi ISA drivers
-obj-$(CONFIG_COMEDI_8255) += 8255.o
obj-$(CONFIG_COMEDI_ACL7225B) += acl7225b.o
obj-$(CONFIG_COMEDI_PCL711) += pcl711.o
obj-$(CONFIG_COMEDI_PCL724) += pcl724.o
@@ -26,7 +25,6 @@ obj-$(CONFIG_COMEDI_PCM3724) += pcm3724.o
obj-$(CONFIG_COMEDI_PCM3730) += pcm3730.o
obj-$(CONFIG_COMEDI_RTI800) += rti800.o
obj-$(CONFIG_COMEDI_RTI802) += rti802.o
-obj-$(CONFIG_COMEDI_DAS08) += das08.o
obj-$(CONFIG_COMEDI_DAS16M1) += das16m1.o
obj-$(CONFIG_COMEDI_DAS16) += das16.o
obj-$(CONFIG_COMEDI_DAS800) += das800.o
@@ -133,4 +131,6 @@ obj-$(CONFIG_COMEDI_NI_TIO) += ni_tio.o
obj-$(CONFIG_COMEDI_NI_TIO) += ni_tiocmd.o
obj-$(CONFIG_COMEDI_NI_LABPC) += ni_labpc.o
+obj-$(CONFIG_COMEDI_8255) += 8255.o
+obj-$(CONFIG_COMEDI_DAS08) += das08.o
obj-$(CONFIG_COMEDI_FC) += comedi_fc.o
--
1.7.1
More information about the devel
mailing list