[PATCH] staging: winbond: reg.c Coding style fixes version 2.
Lars Lindley
lindley at coyote.org
Sun Mar 21 16:50:42 UTC 2010
New patch against master with the fix for a mistake in
the first version.
I fixed all problems reported by checkpatch.pl except some
(a lot of) long lines and some printk:s.
I removed "commented away" code and version comments.
Signed-off-by: Lars Lindley <lindley at coyote.org>
Acked-by: Pekka Enberg <penberg at cs.helsinki.fi>
Acked-by: Pavel Machek <pavel at ucw.cz>
Acked-by: Dan Carpenter <error27 at gmail.com>
---
drivers/staging/winbond/reg.c | 3985 +++++++++++++++++++----------------------
1 files changed, 1847 insertions(+), 2138 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 5f5048a..d9a8128 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1,514 +1,452 @@
#include "sysdef.h"
#include "wbhal_f.h"
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// Original Phy.h
-//*****************************************************************************
-
-/*****************************************************************************
-; For MAXIM2825/6/7 Ver. 331 or more
-; Edited by Tiger, Sep-17-2003
-; revised by Ben, Sep-18-2003
-
-0x00 0x000a2
-0x01 0x21cc0
-;0x02 0x13802
-0x02 0x1383a
-
-;channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
-;channe1 02 ;0x03 0x32141 ;0x04 0x08444;
-;channe1 03 ;0x03 0x32143 ;0x04 0x0aeee;
-;channe1 04 ;0x03 0x32142 ;0x04 0x0b333;
-;channe1 05 ;0x03 0x31141 ;0x04 0x08444;
-;channe1 06 ;
-0x03 0x31143;
-0x04 0x0aeee;
-;channe1 07 ;0x03 0x31142 ;0x04 0x0b333;
-;channe1 08 ;0x03 0x33141 ;0x04 0x08444;
-;channe1 09 ;0x03 0x33143 ;0x04 0x0aeee;
-;channe1 10 ;0x03 0x33142 ;0x04 0x0b333;
-;channe1 11 ;0x03 0x30941 ;0x04 0x08444;
-;channe1 12 ;0x03 0x30943 ;0x04 0x0aeee;
-;channe1 13 ;0x03 0x30942 ;0x04 0x0b333;
-
-0x05 0x28986
-0x06 0x18008
-0x07 0x38400
-0x08 0x05100; 100 Hz DC
-;0x08 0x05900; 30 KHz DC
-0x09 0x24f08
-0x0a 0x17e00, 0x17ea0
-0x0b 0x37d80
-0x0c 0x0c900 // 0x0ca00 (lager power 9db than 0x0c000), 0x0c000
-*****************************************************************************/
-// MAX2825 (pure b/g)
-u32 max2825_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
-};
+/*
+ * ====================================================
+ * Original Phy.h
+ * ====================================================
+ */
-u32 max2825_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+/*
+ * ====================================================
+ * For MAXIM2825/6/7 Ver. 331 or more
+ *
+ * 0x00 0x000a2
+ * 0x01 0x21cc0
+ * 0x02 0x13802
+ * 0x02 0x1383a
+ *
+ * channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
+ * channe1 02 ; 0x03 0x32141 ; 0x04 0x08444;
+ * channe1 03 ; 0x03 0x32143 ; 0x04 0x0aeee;
+ * channe1 04 ; 0x03 0x32142 ; 0x04 0x0b333;
+ * channe1 05 ; 0x03 0x31141 ; 0x04 0x08444;
+ * channe1 06 ; 0x03 0x31143 ; 0x04 0x0aeee;
+ * channe1 07 ; 0x03 0x31142 ; 0x04 0x0b333;
+ * channe1 08 ; 0x03 0x33141 ; 0x04 0x08444;
+ * channe1 09 ; 0x03 0x33143 ; 0x04 0x0aeee;
+ * channe1 10 ; 0x03 0x33142 ; 0x04 0x0b333;
+ * channe1 11 ; 0x03 0x30941 ; 0x04 0x08444;
+ * channe1 12 ; 0x03 0x30943 ; 0x04 0x0aeee;
+ * channe1 13 ; 0x03 0x30942 ; 0x04 0x0b333;
+ *
+ * 0x05 0x28986
+ * 0x06 0x18008
+ * 0x07 0x38400
+ * 0x08 0x05100; 100 Hz DC
+ * 0x08 0x05900; 30 KHz DC
+ * 0x09 0x24f08
+ * 0x0a 0x17e00, 0x17ea0
+ * 0x0b 0x37d80
+ * 0x0c 0x0c900 -- 0x0ca00 (lager power 9db than 0x0c000), 0x0c000
+ */
+
+/* MAX2825 (pure b/g) */
+u32 max2825_rf_data[] = {
+ (0x00<<18) | 0x000a2,
+ (0x01<<18) | 0x21cc0,
+ (0x02<<18) | 0x13806,
+ (0x03<<18) | 0x30142,
+ (0x04<<18) | 0x0b333,
+ (0x05<<18) | 0x289A6,
+ (0x06<<18) | 0x18008,
+ (0x07<<18) | 0x38000,
+ (0x08<<18) | 0x05100,
+ (0x09<<18) | 0x24f08,
+ (0x0A<<18) | 0x14000,
+ (0x0B<<18) | 0x37d80,
+ (0x0C<<18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2825_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/****************************************************************************/
-// MAX2827 (a/b/g)
-u32 max2827_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
+u32 max2825_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2827_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/* ========================================== */
+/* MAX2827 (a/b/g) */
+u32 max2827_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x21cc0,
+ (0x02 << 18) | 0x13806,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x289A6,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38000,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2827_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 40
- {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x2A9A6}, // channel 48
- {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x2A9A6}, // channel 52
- {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 60
- {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6} // channel 64
+u32 max2827_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2827_power_data_24[] = {(0x0C<<18)|0x0C000, (0x0C<<18)|0x0D600, (0x0C<<18)|0x0C100};
-u32 max2827_power_data_50[] = {(0x0C<<18)|0x0C400, (0x0C<<18)|0x0D500, (0x0C<<18)|0x0C300};
-
-/****************************************************************************/
-// MAX2828 (a/b/g)
-u32 max2828_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
+u32 max2827_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 40 */
+ {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2A9A6}, /* channel 48 */
+ {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x2A9A6}, /* channel 52 */
+ {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6} /* channel 64 */
};
-u32 max2828_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100};
+u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300};
+
+/* ======================================================= */
+/* MAX2828 (a/b/g) */
+u32 max2828_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x21cc0,
+ (0x02 << 18) | 0x13806,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x289A6,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38000,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2828_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 40
- {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x289A6}, // channel 48
- {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x289A6}, // channel 52
- {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 60
- {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6} // channel 64
+u32 max2828_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2828_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-u32 max2828_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/****************************************************************************/
-// LA20040728 kevin
-// MAX2829 (a/b/g)
-u32 max2829_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x23520,
- (0x02<<18)|0x13802,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x28906,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x3B500,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0F300 //TXVGA=51, (MAX-6 dB)
+u32 max2828_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 40 */
+ {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}, /* channel 48 */
+ {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x289A6}, /* channel 52 */
+ {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6} /* channel 64 */
};
-u32 max2829_channel_data_24[][3] =
-{
- {(3<<18)|0x30142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 01 (2412MHz)
- {(3<<18)|0x32141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 02 (2417MHz)
- {(3<<18)|0x32143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 03 (2422MHz)
- {(3<<18)|0x32142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 04 (2427MHz)
- {(3<<18)|0x31141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 05 (2432MHz)
- {(3<<18)|0x31143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 06 (2437MHz)
- {(3<<18)|0x31142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 07 (2442MHz)
- {(3<<18)|0x33141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 08 (2447MHz)
- {(3<<18)|0x33143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 09 (2452MHz)
- {(3<<18)|0x33142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 10 (2457MHz)
- {(3<<18)|0x30941, (4<<18)|0x08444, (5<<18)|0x289C6}, // 11 (2462MHz)
- {(3<<18)|0x30943, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 12 (2467MHz)
- {(3<<18)|0x30942, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 13 (2472MHz)
- {(3<<18)|0x32941, (4<<18)|0x09999, (5<<18)|0x289C6}, // 14 (2484MHz) hh-modify
+u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/* ========================================================== */
+/* MAX2829 (a/b/g) */
+u32 max2829_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x23520,
+ (0x02 << 18) | 0x13802,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x28906,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x3B500,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0F300 /* TXVGA=51, (MAX-6 dB) */
};
-u32 max2829_channel_data_50[][4] =
-{
- {36, (3<<18)|0x33cc3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 36 (5.180GHz)
- {40, (3<<18)|0x302c0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 40 (5.200GHz)
- {44, (3<<18)|0x302c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 44 (5.220GHz)
- {48, (3<<18)|0x322c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 48 (5.240GHz)
- {52, (3<<18)|0x312c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 52 (5.260GHz)
- {56, (3<<18)|0x332c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 56 (5.280GHz)
- {60, (3<<18)|0x30ac0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 60 (5.300GHz)
- {64, (3<<18)|0x30ac2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 64 (5.320GHz)
-
- {100, (3<<18)|0x30ec0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 100 (5.500GHz)
- {104, (3<<18)|0x30ec2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 104 (5.520GHz)
- {108, (3<<18)|0x32ec1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 108 (5.540GHz)
- {112, (3<<18)|0x31ec1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 112 (5.560GHz)
- {116, (3<<18)|0x33ec3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 116 (5.580GHz)
- {120, (3<<18)|0x301c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 120 (5.600GHz)
- {124, (3<<18)|0x301c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 124 (5.620GHz)
- {128, (3<<18)|0x321c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 128 (5.640GHz)
- {132, (3<<18)|0x311c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 132 (5.660GHz)
- {136, (3<<18)|0x331c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 136 (5.680GHz)
- {140, (3<<18)|0x309c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 140 (5.700GHz)
-
- {149, (3<<18)|0x329c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 149 (5.745GHz)
- {153, (3<<18)|0x319c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 153 (5.765GHz)
- {157, (3<<18)|0x339c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 157 (5.785GHz)
- {161, (3<<18)|0x305c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 161 (5.805GHz)
-
- // Japan
- { 184, (3<<18)|0x308c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 184 (4.920GHz)
- { 188, (3<<18)|0x328c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 188 (4.940GHz)
- { 192, (3<<18)|0x318c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 192 (4.960GHz)
- { 196, (3<<18)|0x338c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 196 (4.980GHz)
- { 8, (3<<18)|0x324c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 8 (5.040GHz)
- { 12, (3<<18)|0x314c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 12 (5.060GHz)
- { 16, (3<<18)|0x334c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 16 (5.080GHz)
- { 34, (3<<18)|0x31cc2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 34 (5.170GHz)
- { 38, (3<<18)|0x33cc1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 38 (5.190GHz)
- { 42, (3<<18)|0x302c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 42 (5.210GHz)
- { 46, (3<<18)|0x322c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 46 (5.230GHz)
+u32 max2829_channel_data_24[][3] = {
+ {(3 << 18) | 0x30142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 01 (2412MHz) */
+ {(3 << 18) | 0x32141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 02 (2417MHz) */
+ {(3 << 18) | 0x32143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 03 (2422MHz) */
+ {(3 << 18) | 0x32142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 04 (2427MHz) */
+ {(3 << 18) | 0x31141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 05 (2432MHz) */
+ {(3 << 18) | 0x31143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 06 (2437MHz) */
+ {(3 << 18) | 0x31142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 07 (2442MHz) */
+ {(3 << 18) | 0x33141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 08 (2447MHz) */
+ {(3 << 18) | 0x33143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 09 (2452MHz) */
+ {(3 << 18) | 0x33142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 10 (2457MHz) */
+ {(3 << 18) | 0x30941, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 11 (2462MHz) */
+ {(3 << 18) | 0x30943, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 12 (2467MHz) */
+ {(3 << 18) | 0x30942, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 13 (2472MHz) */
+ {(3 << 18) | 0x32941, (4 << 18) | 0x09999, (5 << 18) | 0x289C6}, /* 14 (2484MHz) */
};
-/*****************************************************************************
-; For MAXIM2825/6/7 Ver. 317 or less
-; Edited by Tiger, Sep-17-2003 for 2.4Ghz channels
-; Updated by Tiger, Sep-22-2003 for 5.0Ghz channels
-; Corrected by Tiger, Sep-23-2003, for 0x03 and 0x04 of 5.0Ghz channels
-
-0x00 0x00080
-0x01 0x214c0
-0x02 0x13802
-
-;2.4GHz Channels
-;channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
-;channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
-;channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
-;channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
-;channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
-;channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
-;channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
-;channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
-;channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
-;channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
-;channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
-;channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
-;channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
-
-;5.0Ghz Channels
-;channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
-;channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
-;channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
-;channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
-;channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
-;channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
-;channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
-;channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
-
-;2.4GHz band ;0x05 0x28986;
-;5.0GHz band
-0x05 0x2a986
-
-0x06 0x18008
-0x07 0x38400
-0x08 0x05108
-0x09 0x27ff8
-0x0a 0x14000
-0x0b 0x37f99
-0x0c 0x0c000
-*****************************************************************************/
-u32 maxim_317_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x214c0,
- (0x02<<18)|0x13802,
- (0x03<<18)|0x30143,
- (0x04<<18)|0x0accc,
- (0x05<<18)|0x28986,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38400,
- (0x08<<18)|0x05108,
- (0x09<<18)|0x27ff8,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37f99,
- (0x0C<<18)|0x0c000
+u32 max2829_channel_data_50[][4] = {
+ {36, (3 << 18) | 0x33cc3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 36 (5.180GHz) */
+ {40, (3 << 18) | 0x302c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 40 (5.200GHz) */
+ {44, (3 << 18) | 0x302c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 44 (5.220GHz) */
+ {48, (3 << 18) | 0x322c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 48 (5.240GHz) */
+ {52, (3 << 18) | 0x312c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 52 (5.260GHz) */
+ {56, (3 << 18) | 0x332c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 56 (5.280GHz) */
+ {60, (3 << 18) | 0x30ac0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 60 (5.300GHz) */
+ {64, (3 << 18) | 0x30ac2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 64 (5.320GHz) */
+
+ {100, (3 << 18) | 0x30ec0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 100 (5.500GHz) */
+ {104, (3 << 18) | 0x30ec2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 104 (5.520GHz) */
+ {108, (3 << 18) | 0x32ec1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 108 (5.540GHz) */
+ {112, (3 << 18) | 0x31ec1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 112 (5.560GHz) */
+ {116, (3 << 18) | 0x33ec3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 116 (5.580GHz) */
+ {120, (3 << 18) | 0x301c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 120 (5.600GHz) */
+ {124, (3 << 18) | 0x301c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 124 (5.620GHz) */
+ {128, (3 << 18) | 0x321c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 128 (5.640GHz) */
+ {132, (3 << 18) | 0x311c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 132 (5.660GHz) */
+ {136, (3 << 18) | 0x331c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 136 (5.680GHz) */
+ {140, (3 << 18) | 0x309c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 140 (5.700GHz) */
+
+ {149, (3 << 18) | 0x329c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 149 (5.745GHz) */
+ {153, (3 << 18) | 0x319c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 153 (5.765GHz) */
+ {157, (3 << 18) | 0x339c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 157 (5.785GHz) */
+ {161, (3 << 18) | 0x305c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 161 (5.805GHz) */
+
+ /* Japan */
+ { 184, (3 << 18) | 0x308c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 184 (4.920GHz) */
+ { 188, (3 << 18) | 0x328c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 188 (4.940GHz) */
+ { 192, (3 << 18) | 0x318c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 192 (4.960GHz) */
+ { 196, (3 << 18) | 0x338c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 196 (4.980GHz) */
+ { 8, (3 << 18) | 0x324c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 8 (5.040GHz) */
+ { 12, (3 << 18) | 0x314c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 12 (5.060GHz) */
+ { 16, (3 << 18) | 0x334c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 16 (5.080GHz) */
+ { 34, (3 << 18) | 0x31cc2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 34 (5.170GHz) */
+ { 38, (3 << 18) | 0x33cc1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 38 (5.190GHz) */
+ { 42, (3 << 18) | 0x302c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 42 (5.210GHz) */
+ { 46, (3 << 18) | 0x322c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 46 (5.230GHz) */
};
-u32 maxim_317_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 01
- {(0x03<<18)|0x32140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 02
- {(0x03<<18)|0x32142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 03
- {(0x03<<18)|0x32143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 04
- {(0x03<<18)|0x31140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 05
- {(0x03<<18)|0x31142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 06
- {(0x03<<18)|0x31143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 07
- {(0x03<<18)|0x33140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 08
- {(0x03<<18)|0x33142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 09
- {(0x03<<18)|0x33143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 10
- {(0x03<<18)|0x30940, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 11
- {(0x03<<18)|0x30942, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 12
- {(0x03<<18)|0x30943, (0x04<<18)|0x0accc, (0x05<<18)|0x28986} // channe1 13
+/*
+ * ====================================================================
+ * For MAXIM2825/6/7 Ver. 317 or less
+ *
+ * 0x00 0x00080
+ * 0x01 0x214c0
+ * 0x02 0x13802
+ *
+ * 2.4GHz Channels
+ * channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
+ * channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
+ * channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
+ * channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
+ * channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
+ * channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
+ * channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
+ * channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
+ * channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
+ * channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
+ * channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
+ * channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
+ * channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
+ *
+ * 5.0Ghz Channels
+ * channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
+ * channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
+ * channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
+ * channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
+ * channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
+ * channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
+ * channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
+ * channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
+ *
+ * 2.4GHz band ; 0x05 0x28986;
+ * 5.0GHz band ; 0x05 0x2a986
+ * 0x06 0x18008
+ * 0x07 0x38400
+ * 0x08 0x05108
+ * 0x09 0x27ff8
+ * 0x0a 0x14000
+ * 0x0b 0x37f99
+ * 0x0c 0x0c000
+ * ====================================================================
+ */
+u32 maxim_317_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x214c0,
+ (0x02 << 18) | 0x13802,
+ (0x03 << 18) | 0x30143,
+ (0x04 << 18) | 0x0accc,
+ (0x05 << 18) | 0x28986,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38400,
+ (0x08 << 18) | 0x05108,
+ (0x09 << 18) | 0x27ff8,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37f99,
+ (0x0C << 18) | 0x0c000
};
-u32 maxim_317_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a986}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2a986}, // channel 40
- {(0x03<<18)|0x302c3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a986}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09666, (0x05<<18)|0x2a986}, // channel 48
- {(0x03<<18)|0x312c2, (0x04<<18)|0x09999, (0x05<<18)|0x2a986}, // channel 52
- {(0x03<<18)|0x332c0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a99e}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2a99e}, // channel 60
- {(0x03<<18)|0x30ac3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a99e} // channel 64
+u32 maxim_317_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 01 */
+ {(0x03 << 18) | 0x32140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 02 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 03 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 04 */
+ {(0x03 << 18) | 0x31140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 05 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 06 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 07 */
+ {(0x03 << 18) | 0x33140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 08 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 09 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 10 */
+ {(0x03 << 18) | 0x30940, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 11 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 12 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986} /* channe1 13 */
};
-u32 maxim_317_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-u32 maxim_317_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/*****************************************************************************
-;;AL2230 MP (Mass Production Version)
-;;RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
-;;Updated by Tiger Huang (June 1st, 2004)
-;;20-bit length and LSB first
-
-;;Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
-;;Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
-;;Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
-;;Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
-;;Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
-;;Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
-;;Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
-;;Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
-;;Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
-;;Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
-;;Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
-;;Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
-;;Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
-;;Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
-
-0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
-;;0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
-
-0x03 0xCFFF0
-0x04 0x23800
-0x05 0xA3B72
-0x06 0x6DA01
-0x07 0xE1688
-0x08 0x11600
-0x09 0x99E02
-0x0A 0x5DDB0
-0x0B 0xD9900
-0x0C 0x3FFBD
-0x0D 0xB0000
-0x0F 0xF00A0
-
-;RF Calibration for Airoha AL2230
-;Edit by Ben Chang (01/30/04)
-;Updated by Tiger Huang (03/03/04)
-0x0f 0xf00a0 ; Initial Setting
-0x0f 0xf00b0 ; Activate TX DCC
-0x0f 0xf02a0 ; Activate Phase Calibration
-0x0f 0xf00e0 ; Activate Filter RC Calibration
-0x0f 0xf00a0 ; Restore Initial Setting
-*****************************************************************************/
-
-u32 al2230_rf_data[] =
-{
- (0x00<<20)|0x09EFC,
- (0x01<<20)|0x8CCCC,
- (0x02<<20)|0x40058,// 20060627 Anson 0x401D8,
- (0x03<<20)|0xCFFF0,
- (0x04<<20)|0x24100,// 20060627 Anson 0x23800,
- (0x05<<20)|0xA3B2F,// 20060627 Anson 0xA3B72
- (0x06<<20)|0x6DA01,
- (0x07<<20)|0xE3628,// 20060627 Anson 0xE1688,
- (0x08<<20)|0x11600,
- (0x09<<20)|0x9DC02,// 20060627 Anosn 0x97602,//0x99E02, //0x9AE02
- (0x0A<<20)|0x5ddb0, // 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
- (0x0B<<20)|0xD9900,
- (0x0C<<20)|0x3FFBD,
- (0x0D<<20)|0xB0000,
- (0x0F<<20)|0xF01A0 // 20060627 Anson 0xF00A0
+u32 maxim_317_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a986}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a986}, /* channel 40 */
+ {(0x03 << 18) | 0x302c3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a986}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09666, (0x05 << 18) | 0x2a986}, /* channel 48 */
+ {(0x03 << 18) | 0x312c2, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2a986}, /* channel 52 */
+ {(0x03 << 18) | 0x332c0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a99e}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a99e}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a99e} /* channel 64 */
};
-u32 al2230s_rf_data[] =
-{
- (0x00<<20)|0x09EFC,
- (0x01<<20)|0x8CCCC,
- (0x02<<20)|0x40058,// 20060419 0x401D8,
- (0x03<<20)|0xCFFF0,
- (0x04<<20)|0x24100,// 20060419 0x23800,
- (0x05<<20)|0xA3B2F,// 20060419 0xA3B72,
- (0x06<<20)|0x6DA01,
- (0x07<<20)|0xE3628,// 20060419 0xE1688,
- (0x08<<20)|0x11600,
- (0x09<<20)|0x9DC02,// 20060419 0x97602,//0x99E02, //0x9AE02
- (0x0A<<20)|0x5DDB0,// 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
- (0x0B<<20)|0xD9900,
- (0x0C<<20)|0x3FFBD,
- (0x0D<<20)|0xB0000,
- (0x0F<<20)|0xF01A0 // 20060419 0xF00A0
+u32 maxim_317_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+u32 maxim_317_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/*
+ * ===================================================================
+ * AL2230 MP (Mass Production Version)
+ * RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
+ * 20-bit length and LSB first
+ *
+ * Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
+ * Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
+ * Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
+ * Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
+ * Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
+ * Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
+ * Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
+ * Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
+ * Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
+ * Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
+ * Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
+ * Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
+ * Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
+ * Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
+ *
+ * 0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
+ * 0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
+ *
+ * 0x03 0xCFFF0
+ * 0x04 0x23800
+ * 0x05 0xA3B72
+ * 0x06 0x6DA01
+ * 0x07 0xE1688
+ * 0x08 0x11600
+ * 0x09 0x99E02
+ * 0x0A 0x5DDB0
+ * 0x0B 0xD9900
+ * 0x0C 0x3FFBD
+ * 0x0D 0xB0000
+ * 0x0F 0xF00A0
+ *
+ * RF Calibration for Airoha AL2230
+ *
+ * 0x0f 0xf00a0 ; Initial Setting
+ * 0x0f 0xf00b0 ; Activate TX DCC
+ * 0x0f 0xf02a0 ; Activate Phase Calibration
+ * 0x0f 0xf00e0 ; Activate Filter RC Calibration
+ * 0x0f 0xf00a0 ; Restore Initial Setting
+ * ==================================================================
+ */
+u32 al2230_rf_data[] = {
+ (0x00 << 20) | 0x09EFC,
+ (0x01 << 20) | 0x8CCCC,
+ (0x02 << 20) | 0x40058,
+ (0x03 << 20) | 0xCFFF0,
+ (0x04 << 20) | 0x24100,
+ (0x05 << 20) | 0xA3B2F,
+ (0x06 << 20) | 0x6DA01,
+ (0x07 << 20) | 0xE3628,
+ (0x08 << 20) | 0x11600,
+ (0x09 << 20) | 0x9DC02,
+ (0x0A << 20) | 0x5ddb0,
+ (0x0B << 20) | 0xD9900,
+ (0x0C << 20) | 0x3FFBD,
+ (0x0D << 20) | 0xB0000,
+ (0x0F << 20) | 0xF01A0
};
-u32 al2230_channel_data_24[][2] =
-{
- {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCC}, // channe1 01
- {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCD}, // channe1 02
- {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCC}, // channe1 03
- {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCD}, // channe1 04
- {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCC}, // channe1 05
- {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCD}, // channe1 06
- {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCC}, // channe1 07
- {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCD}, // channe1 08
- {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCC}, // channe1 09
- {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCD}, // channe1 10
- {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCC}, // channe1 11
- {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCD}, // channe1 12
- {(0x00<<20)|0x03EFC, (0x01<<20)|0x8CCCC}, // channe1 13
- {(0x00<<20)|0x03E7C, (0x01<<20)|0x86666} // channe1 14
+u32 al2230s_rf_data[] = {
+ (0x00 << 20) | 0x09EFC,
+ (0x01 << 20) | 0x8CCCC,
+ (0x02 << 20) | 0x40058,
+ (0x03 << 20) | 0xCFFF0,
+ (0x04 << 20) | 0x24100,
+ (0x05 << 20) | 0xA3B2F,
+ (0x06 << 20) | 0x6DA01,
+ (0x07 << 20) | 0xE3628,
+ (0x08 << 20) | 0x11600,
+ (0x09 << 20) | 0x9DC02,
+ (0x0A << 20) | 0x5DDB0,
+ (0x0B << 20) | 0xD9900,
+ (0x0C << 20) | 0x3FFBD,
+ (0x0D << 20) | 0xB0000,
+ (0x0F << 20) | 0xF01A0
};
-// Current setting. u32 airoha_power_data_24[] = {(0x09<<20)|0x90202, (0x09<<20)|0x96602, (0x09<<20)|0x97602};
-#define AIROHA_TXVGA_LOW_INDEX 31 // Index for 0x90202
-#define AIROHA_TXVGA_MIDDLE_INDEX 12 // Index for 0x96602
-#define AIROHA_TXVGA_HIGH_INDEX 8 // Index for 0x97602 1.0.24.0 1.0.28.0
-/*
-u32 airoha_power_data_24[] =
-{
- 0x9FE02, // Max - 0 dB
- 0x9BE02, // Max - 1 dB
- 0x9DE02, // Max - 2 dB
- 0x99E02, // Max - 3 dB
- 0x9EE02, // Max - 4 dB
- 0x9AE02, // Max - 5 dB
- 0x9CE02, // Max - 6 dB
- 0x98E02, // Max - 7 dB
- 0x97602, // Max - 8 dB
- 0x93602, // Max - 9 dB
- 0x95602, // Max - 10 dB
- 0x91602, // Max - 11 dB
- 0x96602, // Max - 12 dB
- 0x92602, // Max - 13 dB
- 0x94602, // Max - 14 dB
- 0x90602, // Max - 15 dB
- 0x97A02, // Max - 16 dB
- 0x93A02, // Max - 17 dB
- 0x95A02, // Max - 18 dB
- 0x91A02, // Max - 19 dB
- 0x96A02, // Max - 20 dB
- 0x92A02, // Max - 21 dB
- 0x94A02, // Max - 22 dB
- 0x90A02, // Max - 23 dB
- 0x97202, // Max - 24 dB
- 0x93202, // Max - 25 dB
- 0x95202, // Max - 26 dB
- 0x91202, // Max - 27 dB
- 0x96202, // Max - 28 dB
- 0x92202, // Max - 29 dB
- 0x94202, // Max - 30 dB
- 0x90202 // Max - 31 dB
+u32 al2230_channel_data_24[][2] = {
+ {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 01 */
+ {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 02 */
+ {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 03 */
+ {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 04 */
+ {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 05 */
+ {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 06 */
+ {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 07 */
+ {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 08 */
+ {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCC}, /* channe1 09 */
+ {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCD}, /* channe1 10 */
+ {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCC}, /* channe1 11 */
+ {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCD}, /* channe1 12 */
+ {(0x00 << 20) | 0x03EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 13 */
+ {(0x00 << 20) | 0x03E7C, (0x01 << 20) | 0x86666} /* channe1 14 */
};
-*/
-// 20040927 1.1.69.1000 ybjiang
-// from John
-u32 al2230_txvga_data[][2] =
-{
- //value , index
+/* Current setting. u32 airoha_power_data_24[] = {(0x09 << 20) | 0x90202, (0x09 << 20) | 0x96602, (0x09 << 20) | 0x97602}; */
+#define AIROHA_TXVGA_LOW_INDEX 31 /* Index for 0x90202 */
+#define AIROHA_TXVGA_MIDDLE_INDEX 12 /* Index for 0x96602 */
+#define AIROHA_TXVGA_HIGH_INDEX 8 /* Index for 0x97602 1.0.24.0 1.0.28.0 */
+
+u32 al2230_txvga_data[][2] = {
+ /* value , index */
{0x090202, 0},
{0x094202, 2},
{0x092202, 4},
@@ -551,263 +489,242 @@ u32 al2230_txvga_data[][2] =
{0x09FE02, 63}
};
-//--------------------------------
-// For Airoha AL7230, 2.4Ghz band
-// Edit by Tiger, (March, 9, 2005)
-// 24bit, MSB first
-
-//channel independent registers:
-u32 al7230_rf_data_24[] =
-{
- (0x00<<24)|0x003790,
- (0x01<<24)|0x133331,
- (0x02<<24)|0x841FF2,
- (0x03<<24)|0x3FDFA3,
- (0x04<<24)|0x7FD784,
- (0x05<<24)|0x802B55,
- (0x06<<24)|0x56AF36,
- (0x07<<24)|0xCE0207,
- (0x08<<24)|0x6EBC08,
- (0x09<<24)|0x221BB9,
- (0x0A<<24)|0xE0000A,
- (0x0B<<24)|0x08071B,
- (0x0C<<24)|0x000A3C,
- (0x0D<<24)|0xFFFFFD,
- (0x0E<<24)|0x00000E,
- (0x0F<<24)|0x1ABA8F
+/*
+ * ==========================================
+ * For Airoha AL7230, 2.4Ghz band
+ * 24bit, MSB first
+ */
+
+/* channel independent registers: */
+u32 al7230_rf_data_24[] = {
+ (0x00 << 24) | 0x003790,
+ (0x01 << 24) | 0x133331,
+ (0x02 << 24) | 0x841FF2,
+ (0x03 << 24) | 0x3FDFA3,
+ (0x04 << 24) | 0x7FD784,
+ (0x05 << 24) | 0x802B55,
+ (0x06 << 24) | 0x56AF36,
+ (0x07 << 24) | 0xCE0207,
+ (0x08 << 24) | 0x6EBC08,
+ (0x09 << 24) | 0x221BB9,
+ (0x0A << 24) | 0xE0000A,
+ (0x0B << 24) | 0x08071B,
+ (0x0C << 24) | 0x000A3C,
+ (0x0D << 24) | 0xFFFFFD,
+ (0x0E << 24) | 0x00000E,
+ (0x0F << 24) | 0x1ABA8F
};
-u32 al7230_channel_data_24[][2] =
-{
- {(0x00<<24)|0x003790, (0x01<<24)|0x133331}, // channe1 01
- {(0x00<<24)|0x003790, (0x01<<24)|0x1B3331}, // channe1 02
- {(0x00<<24)|0x003790, (0x01<<24)|0x033331}, // channe1 03
- {(0x00<<24)|0x003790, (0x01<<24)|0x0B3331}, // channe1 04
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x133331}, // channe1 05
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x1B3331}, // channe1 06
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x033331}, // channe1 07
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x0B3331}, // channe1 08
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x133331}, // channe1 09
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x1B3331}, // channe1 10
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x033331}, // channe1 11
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x0B3331}, // channe1 12
- {(0x00<<24)|0x0037C0, (0x01<<24)|0x133331}, // channe1 13
- {(0x00<<24)|0x0037C0, (0x01<<24)|0x066661} // channel 14
+u32 al7230_channel_data_24[][2] = {
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x133331}, /* channe1 01 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x1B3331}, /* channe1 02 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x033331}, /* channe1 03 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x0B3331}, /* channe1 04 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x133331}, /* channe1 05 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x1B3331}, /* channe1 06 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x033331}, /* channe1 07 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x0B3331}, /* channe1 08 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x133331}, /* channe1 09 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x1B3331}, /* channe1 10 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x033331}, /* channe1 11 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x0B3331}, /* channe1 12 */
+ {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x133331}, /* channe1 13 */
+ {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x066661} /* channel 14 */
};
-//channel independent registers:
-u32 al7230_rf_data_50[] =
-{
- (0x00<<24)|0x0FF520,
- (0x01<<24)|0x000001,
- (0x02<<24)|0x451FE2,
- (0x03<<24)|0x5FDFA3,
- (0x04<<24)|0x6FD784,
- (0x05<<24)|0x853F55,
- (0x06<<24)|0x56AF36,
- (0x07<<24)|0xCE0207,
- (0x08<<24)|0x6EBC08,
- (0x09<<24)|0x221BB9,
- (0x0A<<24)|0xE0600A,
- (0x0B<<24)|0x08044B,
- (0x0C<<24)|0x00143C,
- (0x0D<<24)|0xFFFFFD,
- (0x0E<<24)|0x00000E,
- (0x0F<<24)|0x12BACF //5Ghz default state
+/* channel independent registers: */
+u32 al7230_rf_data_50[] = {
+ (0x00 << 24) | 0x0FF520,
+ (0x01 << 24) | 0x000001,
+ (0x02 << 24) | 0x451FE2,
+ (0x03 << 24) | 0x5FDFA3,
+ (0x04 << 24) | 0x6FD784,
+ (0x05 << 24) | 0x853F55,
+ (0x06 << 24) | 0x56AF36,
+ (0x07 << 24) | 0xCE0207,
+ (0x08 << 24) | 0x6EBC08,
+ (0x09 << 24) | 0x221BB9,
+ (0x0A << 24) | 0xE0600A,
+ (0x0B << 24) | 0x08044B,
+ (0x0C << 24) | 0x00143C,
+ (0x0D << 24) | 0xFFFFFD,
+ (0x0E << 24) | 0x00000E,
+ (0x0F << 24) | 0x12BACF /* 5Ghz default state */
};
-u32 al7230_channel_data_5[][4] =
-{
- //channel dependent registers: 0x00, 0x01 and 0x04
- //11J ===========
- {184, (0x00<<24)|0x0FF520, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 184
- {188, (0x00<<24)|0x0FF520, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 188
- {192, (0x00<<24)|0x0FF530, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 192
- {196, (0x00<<24)|0x0FF530, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 196
- {8, (0x00<<24)|0x0FF540, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 008
- {12, (0x00<<24)|0x0FF540, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 012
- {16, (0x00<<24)|0x0FF550, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 016
- {34, (0x00<<24)|0x0FF560, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 034
- {38, (0x00<<24)|0x0FF570, (0x01<<24)|0x100001, (0x04<<24)|0x77F784}, // channel 038
- {42, (0x00<<24)|0x0FF570, (0x01<<24)|0x1AAAA1, (0x04<<24)|0x77F784}, // channel 042
- {46, (0x00<<24)|0x0FF570, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 046
- //11 A/H =========
- {36, (0x00<<24)|0x0FF560, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 036
- {40, (0x00<<24)|0x0FF570, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 040
- {44, (0x00<<24)|0x0FF570, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 044
- {48, (0x00<<24)|0x0FF570, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 048
- {52, (0x00<<24)|0x0FF580, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 052
- {56, (0x00<<24)|0x0FF580, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 056
- {60, (0x00<<24)|0x0FF580, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 060
- {64, (0x00<<24)|0x0FF590, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 064
- {100, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 100
- {104, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 104
- {108, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 108
- {112, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 112
- {116, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 116
- {120, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 120
- {124, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 124
- {128, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 128
- {132, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 132
- {136, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 136
- {140, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 140
- {149, (0x00<<24)|0x0FF600, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 149
- {153, (0x00<<24)|0x0FF600, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784}, // channel 153
- {157, (0x00<<24)|0x0FF600, (0x01<<24)|0x0D5551, (0x04<<24)|0x77F784}, // channel 157
- {161, (0x00<<24)|0x0FF610, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 161
- {165, (0x00<<24)|0x0FF610, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784} // channel 165
+u32 al7230_channel_data_5[][4] = {
+ /* channel dependent registers: 0x00, 0x01 and 0x04 */
+ /* 11J =========== */
+ {184, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 184 */
+ {188, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 188 */
+ {192, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 192 */
+ {196, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 196 */
+ {8, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 008 */
+ {12, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 012 */
+ {16, (0x00 << 24) | 0x0FF550, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 016 */
+ {34, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 034 */
+ {38, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x100001, (0x04 << 24) | 0x77F784}, /* channel 038 */
+ {42, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x1AAAA1, (0x04 << 24) | 0x77F784}, /* channel 042 */
+ {46, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 046 */
+ /* 11 A/H ========= */
+ {36, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 036 */
+ {40, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 040 */
+ {44, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 044 */
+ {48, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 048 */
+ {52, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 052 */
+ {56, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 056 */
+ {60, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 060 */
+ {64, (0x00 << 24) | 0x0FF590, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 064 */
+ {100, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 100 */
+ {104, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 104 */
+ {108, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 108 */
+ {112, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 112 */
+ {116, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 116 */
+ {120, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 120 */
+ {124, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 124 */
+ {128, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 128 */
+ {132, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 132 */
+ {136, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 136 */
+ {140, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 140 */
+ {149, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 149 */
+ {153, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784}, /* channel 153 */
+ {157, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x0D5551, (0x04 << 24) | 0x77F784}, /* channel 157 */
+ {161, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 161 */
+ {165, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784} /* channel 165 */
};
-//; RF Calibration <=== Register 0x0F
-//0x0F 0x1ABA8F; start from 2.4Ghz default state
-//0x0F 0x9ABA8F; TXDC compensation
-//0x0F 0x3ABA8F; RXFIL adjustment
-//0x0F 0x1ABA8F; restore 2.4Ghz default state
-
-//;TXVGA Mapping Table <=== Register 0x0B
-u32 al7230_txvga_data[][2] =
-{
- {0x08040B, 0}, //TXVGA=0;
- {0x08041B, 1}, //TXVGA=1;
- {0x08042B, 2}, //TXVGA=2;
- {0x08043B, 3}, //TXVGA=3;
- {0x08044B, 4}, //TXVGA=4;
- {0x08045B, 5}, //TXVGA=5;
- {0x08046B, 6}, //TXVGA=6;
- {0x08047B, 7}, //TXVGA=7;
- {0x08048B, 8}, //TXVGA=8;
- {0x08049B, 9}, //TXVGA=9;
- {0x0804AB, 10}, //TXVGA=10;
- {0x0804BB, 11}, //TXVGA=11;
- {0x0804CB, 12}, //TXVGA=12;
- {0x0804DB, 13}, //TXVGA=13;
- {0x0804EB, 14}, //TXVGA=14;
- {0x0804FB, 15}, //TXVGA=15;
- {0x08050B, 16}, //TXVGA=16;
- {0x08051B, 17}, //TXVGA=17;
- {0x08052B, 18}, //TXVGA=18;
- {0x08053B, 19}, //TXVGA=19;
- {0x08054B, 20}, //TXVGA=20;
- {0x08055B, 21}, //TXVGA=21;
- {0x08056B, 22}, //TXVGA=22;
- {0x08057B, 23}, //TXVGA=23;
- {0x08058B, 24}, //TXVGA=24;
- {0x08059B, 25}, //TXVGA=25;
- {0x0805AB, 26}, //TXVGA=26;
- {0x0805BB, 27}, //TXVGA=27;
- {0x0805CB, 28}, //TXVGA=28;
- {0x0805DB, 29}, //TXVGA=29;
- {0x0805EB, 30}, //TXVGA=30;
- {0x0805FB, 31}, //TXVGA=31;
- {0x08060B, 32}, //TXVGA=32;
- {0x08061B, 33}, //TXVGA=33;
- {0x08062B, 34}, //TXVGA=34;
- {0x08063B, 35}, //TXVGA=35;
- {0x08064B, 36}, //TXVGA=36;
- {0x08065B, 37}, //TXVGA=37;
- {0x08066B, 38}, //TXVGA=38;
- {0x08067B, 39}, //TXVGA=39;
- {0x08068B, 40}, //TXVGA=40;
- {0x08069B, 41}, //TXVGA=41;
- {0x0806AB, 42}, //TXVGA=42;
- {0x0806BB, 43}, //TXVGA=43;
- {0x0806CB, 44}, //TXVGA=44;
- {0x0806DB, 45}, //TXVGA=45;
- {0x0806EB, 46}, //TXVGA=46;
- {0x0806FB, 47}, //TXVGA=47;
- {0x08070B, 48}, //TXVGA=48;
- {0x08071B, 49}, //TXVGA=49;
- {0x08072B, 50}, //TXVGA=50;
- {0x08073B, 51}, //TXVGA=51;
- {0x08074B, 52}, //TXVGA=52;
- {0x08075B, 53}, //TXVGA=53;
- {0x08076B, 54}, //TXVGA=54;
- {0x08077B, 55}, //TXVGA=55;
- {0x08078B, 56}, //TXVGA=56;
- {0x08079B, 57}, //TXVGA=57;
- {0x0807AB, 58}, //TXVGA=58;
- {0x0807BB, 59}, //TXVGA=59;
- {0x0807CB, 60}, //TXVGA=60;
- {0x0807DB, 61}, //TXVGA=61;
- {0x0807EB, 62}, //TXVGA=62;
- {0x0807FB, 63}, //TXVGA=63;
+/*
+ * RF Calibration <=== Register 0x0F
+ * 0x0F 0x1ABA8F; start from 2.4Ghz default state
+ * 0x0F 0x9ABA8F; TXDC compensation
+ * 0x0F 0x3ABA8F; RXFIL adjustment
+ * 0x0F 0x1ABA8F; restore 2.4Ghz default state
+ */
+
+/* TXVGA Mapping Table <=== Register 0x0B */
+u32 al7230_txvga_data[][2] = {
+ {0x08040B, 0}, /* TXVGA = 0; */
+ {0x08041B, 1}, /* TXVGA = 1; */
+ {0x08042B, 2}, /* TXVGA = 2; */
+ {0x08043B, 3}, /* TXVGA = 3; */
+ {0x08044B, 4}, /* TXVGA = 4; */
+ {0x08045B, 5}, /* TXVGA = 5; */
+ {0x08046B, 6}, /* TXVGA = 6; */
+ {0x08047B, 7}, /* TXVGA = 7; */
+ {0x08048B, 8}, /* TXVGA = 8; */
+ {0x08049B, 9}, /* TXVGA = 9; */
+ {0x0804AB, 10}, /* TXVGA = 10; */
+ {0x0804BB, 11}, /* TXVGA = 11; */
+ {0x0804CB, 12}, /* TXVGA = 12; */
+ {0x0804DB, 13}, /* TXVGA = 13; */
+ {0x0804EB, 14}, /* TXVGA = 14; */
+ {0x0804FB, 15}, /* TXVGA = 15; */
+ {0x08050B, 16}, /* TXVGA = 16; */
+ {0x08051B, 17}, /* TXVGA = 17; */
+ {0x08052B, 18}, /* TXVGA = 18; */
+ {0x08053B, 19}, /* TXVGA = 19; */
+ {0x08054B, 20}, /* TXVGA = 20; */
+ {0x08055B, 21}, /* TXVGA = 21; */
+ {0x08056B, 22}, /* TXVGA = 22; */
+ {0x08057B, 23}, /* TXVGA = 23; */
+ {0x08058B, 24}, /* TXVGA = 24; */
+ {0x08059B, 25}, /* TXVGA = 25; */
+ {0x0805AB, 26}, /* TXVGA = 26; */
+ {0x0805BB, 27}, /* TXVGA = 27; */
+ {0x0805CB, 28}, /* TXVGA = 28; */
+ {0x0805DB, 29}, /* TXVGA = 29; */
+ {0x0805EB, 30}, /* TXVGA = 30; */
+ {0x0805FB, 31}, /* TXVGA = 31; */
+ {0x08060B, 32}, /* TXVGA = 32; */
+ {0x08061B, 33}, /* TXVGA = 33; */
+ {0x08062B, 34}, /* TXVGA = 34; */
+ {0x08063B, 35}, /* TXVGA = 35; */
+ {0x08064B, 36}, /* TXVGA = 36; */
+ {0x08065B, 37}, /* TXVGA = 37; */
+ {0x08066B, 38}, /* TXVGA = 38; */
+ {0x08067B, 39}, /* TXVGA = 39; */
+ {0x08068B, 40}, /* TXVGA = 40; */
+ {0x08069B, 41}, /* TXVGA = 41; */
+ {0x0806AB, 42}, /* TXVGA = 42; */
+ {0x0806BB, 43}, /* TXVGA = 43; */
+ {0x0806CB, 44}, /* TXVGA = 44; */
+ {0x0806DB, 45}, /* TXVGA = 45; */
+ {0x0806EB, 46}, /* TXVGA = 46; */
+ {0x0806FB, 47}, /* TXVGA = 47; */
+ {0x08070B, 48}, /* TXVGA = 48; */
+ {0x08071B, 49}, /* TXVGA = 49; */
+ {0x08072B, 50}, /* TXVGA = 50; */
+ {0x08073B, 51}, /* TXVGA = 51; */
+ {0x08074B, 52}, /* TXVGA = 52; */
+ {0x08075B, 53}, /* TXVGA = 53; */
+ {0x08076B, 54}, /* TXVGA = 54; */
+ {0x08077B, 55}, /* TXVGA = 55; */
+ {0x08078B, 56}, /* TXVGA = 56; */
+ {0x08079B, 57}, /* TXVGA = 57; */
+ {0x0807AB, 58}, /* TXVGA = 58; */
+ {0x0807BB, 59}, /* TXVGA = 59; */
+ {0x0807CB, 60}, /* TXVGA = 60; */
+ {0x0807DB, 61}, /* TXVGA = 61; */
+ {0x0807EB, 62}, /* TXVGA = 62; */
+ {0x0807FB, 63}, /* TXVGA = 63; */
};
-//--------------------------------
-
+/* ============================================= */
-//; W89RF242 RFIC SPI programming initial data
-//; Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
-//; Update Date: Ocotber 3, 2005 by PP10 Hsiang-Te Ho
-//;
-//; Version 1.3b revision items: (Oct. 1, 2005 by HTHo) for FA5976A
-u32 w89rf242_rf_data[] =
-{
- (0x00<<24)|0xF86100, // 20060721 0xF86100, //; 3E184; MODA (0x00) -- Normal mode ; calibration off
- (0x01<<24)|0xEFFFC2, //; 3BFFF; MODB (0x01) -- turn off RSSI, and other circuits are turned on
- (0x02<<24)|0x102504, //; 04094; FSET (0x02) -- default 20MHz crystal ; Icmp=1.5mA
- (0x03<<24)|0x026286, //; 0098A; FCHN (0x03) -- default CH7, 2442MHz
- (0x04<<24)|0x000208, // 20060612.1.a 0x0002C8, // 20050818 // 20050816 0x000388
- //; 02008; FCAL (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C
- (0x05<<24)|0x24C60A, // 20060612.1.a 0x24C58A, // 941003 0x24C48A, // 20050818.2 0x24848A, // 20050818 // 20050816 0x24C48A
- //; 09316; GANA (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D
- (0x06<<24)|0x3432CC, // 941003 0x26C34C, // 20050818 0x06B40C
- //; 0D0CB; GANB (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input
- (0x07<<24)|0x0C68CE, // 20050818.2 0x0C66CE, // 20050818 // 20050816 0x0C68CE
- //; 031A3; FILT (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100
- (0x08<<24)|0x100010, //; 04000; TCAL (0x08) -- //for LO
- (0x09<<24)|0x004012, // 20060612.1.a 0x6E4012, // 0x004012,
- //; 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C)
- (0x0A<<24)|0x704014, //; 1C100; RCALB (0x0A)
- (0x0B<<24)|0x18BDD6, // 941003 0x1805D6, // 20050818.2 0x1801D6, // 20050818 // 20050816 0x1805D6
- //; 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B (2005/09/29)
- (0x0C<<24)|0x575558, // 20050818.2 0x555558, // 20050818 // 20050816 0x575558
- //; 15D55 ; IBSA (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner
- (0x0D<<24)|0x55545A, // 20060612.1.a 0x55555A,
- //; 15555 ; IBSB (0x0D)
- (0x0E<<24)|0x5557DC, // 20060612.1.a 0x55555C, // 941003 0x5557DC,
- //; 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F (2005/11/25)
- (0x10<<24)|0x000C20, // 941003 0x000020, // 20050818
- //; 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB
- (0x11<<24)|0x0C0022, // 941003 0x030022 // 20050818.2 0x030022 // 20050818 // 20050816 0x0C0022
- //; 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C)
- (0x12<<24)|0x000024 // 20060612.1.a 0x001824 // 941003 add
- //; TMODC (0x12) -- Turn OFF Tempearure sensor
+/*
+ * W89RF242 RFIC SPI programming initial data
+ * Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
+ */
+u32 w89rf242_rf_data[] = {
+ (0x00 << 24) | 0xF86100, /* 3E184; MODA (0x00) -- Normal mode ; calibration off */
+ (0x01 << 24) | 0xEFFFC2, /* 3BFFF; MODB (0x01) -- turn off RSSI, and other circuits are turned on */
+ (0x02 << 24) | 0x102504, /* 04094; FSET (0x02) -- default 20MHz crystal ; Icmp=1.5mA */
+ (0x03 << 24) | 0x026286, /* 0098A; FCHN (0x03) -- default CH7, 2442MHz */
+ (0x04 << 24) | 0x000208, /* 02008; FCAL (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C */
+ (0x05 << 24) | 0x24C60A, /* 09316; GANA (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D */
+ (0x06 << 24) | 0x3432CC, /* 0D0CB; GANB (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input */
+ (0x07 << 24) | 0x0C68CE, /* 031A3; FILT (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100 */
+ (0x08 << 24) | 0x100010, /* 04000; TCAL (0x08) -- for LO */
+ (0x09 << 24) | 0x004012, /* 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C) */
+ (0x0A << 24) | 0x704014, /* 1C100; RCALB (0x0A) */
+ (0x0B << 24) | 0x18BDD6, /* 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B */
+ (0x0C << 24) | 0x575558, /* 15D55 ; IBSA (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner */
+ (0x0D << 24) | 0x55545A, /* 15555 ; IBSB (0x0D) */
+ (0x0E << 24) | 0x5557DC, /* 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */
+ (0x10 << 24) | 0x000C20, /* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */
+ (0x11 << 24) | 0x0C0022, /* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */
+ (0x12 << 24) | 0x000024 /* TMODC (0x12) -- Turn OFF Tempearure sensor */
};
-u32 w89rf242_channel_data_24[][2] =
-{
- {(0x03<<24)|0x025B06, (0x04<<24)|0x080408}, // channe1 01
- {(0x03<<24)|0x025C46, (0x04<<24)|0x080408}, // channe1 02
- {(0x03<<24)|0x025D86, (0x04<<24)|0x080408}, // channe1 03
- {(0x03<<24)|0x025EC6, (0x04<<24)|0x080408}, // channe1 04
- {(0x03<<24)|0x026006, (0x04<<24)|0x080408}, // channe1 05
- {(0x03<<24)|0x026146, (0x04<<24)|0x080408}, // channe1 06
- {(0x03<<24)|0x026286, (0x04<<24)|0x080408}, // channe1 07
- {(0x03<<24)|0x0263C6, (0x04<<24)|0x080408}, // channe1 08
- {(0x03<<24)|0x026506, (0x04<<24)|0x080408}, // channe1 09
- {(0x03<<24)|0x026646, (0x04<<24)|0x080408}, // channe1 10
- {(0x03<<24)|0x026786, (0x04<<24)|0x080408}, // channe1 11
- {(0x03<<24)|0x0268C6, (0x04<<24)|0x080408}, // channe1 12
- {(0x03<<24)|0x026A06, (0x04<<24)|0x080408}, // channe1 13
- {(0x03<<24)|0x026D06, (0x04<<24)|0x080408} // channe1 14
+u32 w89rf242_channel_data_24[][2] = {
+ {(0x03 << 24) | 0x025B06, (0x04 << 24) | 0x080408}, /* channe1 01 */
+ {(0x03 << 24) | 0x025C46, (0x04 << 24) | 0x080408}, /* channe1 02 */
+ {(0x03 << 24) | 0x025D86, (0x04 << 24) | 0x080408}, /* channe1 03 */
+ {(0x03 << 24) | 0x025EC6, (0x04 << 24) | 0x080408}, /* channe1 04 */
+ {(0x03 << 24) | 0x026006, (0x04 << 24) | 0x080408}, /* channe1 05 */
+ {(0x03 << 24) | 0x026146, (0x04 << 24) | 0x080408}, /* channe1 06 */
+ {(0x03 << 24) | 0x026286, (0x04 << 24) | 0x080408}, /* channe1 07 */
+ {(0x03 << 24) | 0x0263C6, (0x04 << 24) | 0x080408}, /* channe1 08 */
+ {(0x03 << 24) | 0x026506, (0x04 << 24) | 0x080408}, /* channe1 09 */
+ {(0x03 << 24) | 0x026646, (0x04 << 24) | 0x080408}, /* channe1 10 */
+ {(0x03 << 24) | 0x026786, (0x04 << 24) | 0x080408}, /* channe1 11 */
+ {(0x03 << 24) | 0x0268C6, (0x04 << 24) | 0x080408}, /* channe1 12 */
+ {(0x03 << 24) | 0x026A06, (0x04 << 24) | 0x080408}, /* channe1 13 */
+ {(0x03 << 24) | 0x026D06, (0x04 << 24) | 0x080408} /* channe1 14 */
};
-u32 w89rf242_power_data_24[] = {(0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A};
+u32 w89rf242_power_data_24[] = {(0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A};
-// 20060315.6 Enlarge for new scale
-// 20060316.6 20060619.2.a add mapping array
-u32 w89rf242_txvga_old_mapping[][2] =
-{
- {0, 0} , // New <-> Old
+u32 w89rf242_txvga_old_mapping[][2] = {
+ {0, 0} , /* New <-> Old */
{1, 1} ,
{2, 2} ,
{3, 3} ,
{4, 4} ,
{6, 5} ,
- {8, 6 },
- {10, 7 },
- {12, 8 },
- {14, 9 },
+ {8, 6},
+ {10, 7},
+ {12, 8},
+ {14, 9},
{16, 10},
{18, 11},
{20, 12},
@@ -818,1704 +735,1514 @@ u32 w89rf242_txvga_old_mapping[][2] =
{30, 17},
{32, 18},
{34, 19},
+};
+u32 w89rf242_txvga_data[][5] = {
+ /* low gain mode */
+ {(0x05 << 24) | 0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131}, /* min gain */
+ {(0x05 << 24) | 0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131},
+ {(0x05 << 24) | 0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131}, /* (default) +14dBm (ANT) */
+ {(0x05 << 24) | 0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131},
-};
+ /* TXVGA=0x10 */
+ {(0x05 << 24) | 0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838},
+ {(0x05 << 24) | 0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B},
-// 20060619.3 modify from Bruce's mail
-u32 w89rf242_txvga_data[][5] =
-{
- //low gain mode
- { (0x05<<24)|0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131 },// ; min gain
- { (0x05<<24)|0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131 },
- { (0x05<<24)|0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131 },// (default) +14dBm (ANT)
- { (0x05<<24)|0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131 },
-
- //TXVGA=0x10
- { (0x05<<24)|0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838 },
- { (0x05<<24)|0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B },
-
- //TXVGA=0x11
- { (0x05<<24)|0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333 },
- { (0x05<<24)|0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737 },
-
- //TXVGA=0x12
- { (0x05<<24)|0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030 },
- { (0x05<<24)|0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434 },
-
- //TXVGA=0x13
- { (0x05<<24)|0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030 },
- { (0x05<<24)|0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232 },
-
- //TXVGA=0x14
- { (0x05<<24)|0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131 },
- { (0x05<<24)|0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434 },
-
- //TXVGA=0x15
- { (0x05<<24)|0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131 },
- { (0x05<<24)|0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434 },
-
- //TXVGA=0x16
- { (0x05<<24)|0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131 },
- { (0x05<<24)|0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535 },
-
- //TXVGA=0x17
- { (0x05<<24)|0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F },
- { (0x05<<24)|0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131 },
-
- //TXVGA=0x18
- { (0x05<<24)|0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E },
- { (0x05<<24)|0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030 },
-
- //TXVGA=0x19
- { (0x05<<24)|0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D },
- { (0x05<<24)|0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030 },
-
- //TXVGA=0x1A
- { (0x05<<24)|0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E },
- { (0x05<<24)|0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131 },
-
- //TXVGA=0x1B
- { (0x05<<24)|0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030 },
- { (0x05<<24)|0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434 },
-
- //TXVGA=0x1C
- { (0x05<<24)|0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131 },
- { (0x05<<24)|0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636 },
-
- //TXVGA=0x1D
- { (0x05<<24)|0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737 },
- { (0x05<<24)|0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B },
-
- //TXVGA=0x1E
- { (0x05<<24)|0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B },
- { (0x05<<24)|0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141 },
-
- //TXVGA=0x1F
- { (0x05<<24)|0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242 }
+ /* TXVGA=0x11 */
+ { (0x05 << 24) | 0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333},
+ { (0x05 << 24) | 0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737},
+
+ /* TXVGA=0x12 */
+ {(0x05 << 24) | 0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030},
+ {(0x05 << 24) | 0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434},
+
+ /* TXVGA=0x13 */
+ {(0x05 << 24) | 0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030},
+ {(0x05 << 24) | 0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232},
+
+ /* TXVGA=0x14 */
+ {(0x05 << 24) | 0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131},
+ {(0x05 << 24) | 0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434},
+
+ /* TXVGA=0x15 */
+ {(0x05 << 24) | 0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131},
+ {(0x05 << 24) | 0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434},
+
+ /* TXVGA=0x16 */
+ {(0x05 << 24) | 0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131},
+ {(0x05 << 24) | 0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535},
+
+ /* TXVGA=0x17 */
+ {(0x05 << 24) | 0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F},
+ {(0x05 << 24) | 0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131},
+
+ /* TXVGA=0x18 */
+ {(0x05 << 24) | 0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E},
+ {(0x05 << 24) | 0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030},
+
+ /* TXVGA=0x19 */
+ {(0x05 << 24) | 0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D},
+ {(0x05 << 24) | 0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030},
+
+ /* TXVGA=0x1A */
+ {(0x05 << 24) | 0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E},
+ {(0x05 << 24) | 0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131},
+
+ /* TXVGA=0x1B */
+ {(0x05 << 24) | 0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030},
+ {(0x05 << 24) | 0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434},
+
+ /* TXVGA=0x1C */
+ {(0x05 << 24) | 0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131},
+ {(0x05 << 24) | 0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636},
+
+ /* TXVGA=0x1D */
+ {(0x05 << 24) | 0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737},
+ {(0x05 << 24) | 0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B},
+
+ /* TXVGA=0x1E */
+ {(0x05 << 24) | 0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B},
+ {(0x05 << 24) | 0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141},
+
+ /* TXVGA=0x1F */
+ {(0x05 << 24) | 0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242}
};
-///////////////////////////////////////////////////////////////////////////////////////////////////
-///////////////////////////////////////////////////////////////////////////////////////////////////
-///////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-
-//=============================================================================================================
-// Uxx_ReadEthernetAddress --
-//
-// Routine Description:
-// Reads in the Ethernet address from the IC.
-//
-// Arguments:
-// pHwData - The pHwData structure
-//
-// Return Value:
-//
-// The address is stored in EthernetIDAddr.
-//=============================================================================================================
-void
-Uxx_ReadEthernetAddress( struct hw_data * pHwData )
+/* ================================================================================================== */
+
+
+
+/*
+ * =============================================================================================================
+ * Uxx_ReadEthernetAddress --
+ *
+ * Routine Description:
+ * Reads in the Ethernet address from the IC.
+ *
+ * Arguments:
+ * pHwData - The pHwData structure
+ *
+ * Return Value:
+ *
+ * The address is stored in EthernetIDAddr.
+ * =============================================================================================================
+ */
+void Uxx_ReadEthernetAddress(struct hw_data *pHwData)
{
u32 ltmp;
- // Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
- // Only unplug and plug again can make hardware read EEPROM again. 20060727
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
+ /*
+ * Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
+ * Only unplug and plug again can make hardware read EEPROM again.
+ */
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08000000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16) ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08010000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16) ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08020000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16) ltmp);
*(u16 *)(pHwData->PermanentMacAddress + 6) = 0;
- Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress) ); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian
+ Wb35Reg_WriteSync(pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress));
+ Wb35Reg_WriteSync(pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress + 4)));
}
-//===============================================================================================================
-// CardGetMulticastBit --
-// Description:
-// For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
-// Calls CardComputeCrc() to determine the CRC value.
-// Arguments:
-// Address - the address
-// Byte - the byte that it hashes to
-// Value - will have a 1 in the relevant bit
-// Return Value:
-// None.
-//==============================================================================================================
-void CardGetMulticastBit( u8 Address[ETH_ALEN], u8 *Byte, u8 *Value )
+/*
+ * ===============================================================================================================
+ * CardGetMulticastBit --
+ * Description:
+ * For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
+ * Calls CardComputeCrc() to determine the CRC value.
+ * Arguments:
+ * Address - the address
+ * Byte - the byte that it hashes to
+ * Value - will have a 1 in the relevant bit
+ * Return Value:
+ * None.
+ * ==============================================================================================================
+ */
+void CardGetMulticastBit(u8 Address[ETH_ALEN], u8 *Byte, u8 *Value)
{
- u32 Crc;
- u32 BitNumber;
+ u32 Crc;
+ u32 BitNumber;
- // First compute the CRC.
- Crc = CardComputeCrc(Address, ETH_ALEN);
+ /* First compute the CRC. */
+ Crc = CardComputeCrc(Address, ETH_ALEN);
- // The computed CRC is bit0~31 from left to right
- //At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128
+ /* The computed CRC is bit0~31 from left to right */
+ /* At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128 */
BitNumber = (u32) ((Crc >> 26) & 0x3f);
- *Byte = (u8) (BitNumber >> 3);// 900514 original (BitNumber / 8)
- *Value = (u8) ((u8)1 << (BitNumber % 8));
+ *Byte = (u8) (BitNumber >> 3); /* 900514 original (BitNumber / 8) */
+ *Value = (u8) ((u8) 1 << (BitNumber % 8));
}
-void Uxx_power_on_procedure( struct hw_data * pHwData )
+void Uxx_power_on_procedure(struct hw_data *pHwData)
{
u32 ltmp, loop;
- if( pHwData->phy_type <= RF_MAXIM_V1 )
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xffffff38 );
- else
- {
- Wb35Reg_WriteSync( pHwData, 0x03f4, 0xFF5807FF );// 20060721 For NEW IC 0xFF5807FF
-
- // 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- msleep(10); // Modify 20051221.1.b
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
- msleep(10); // Modify 20051221.1.b
-
+ if (pHwData->phy_type <= RF_MAXIM_V1)
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
+ else {
+ Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
+ msleep(10);
ltmp = 0x4968;
- if( (pHwData->phy_type == RF_WB_242) ||
- (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
+ if ((pHwData->phy_type == RF_WB_242) ||
+ (RF_WB_242_1 == pHwData->phy_type))
ltmp = 0x4468;
- Wb35Reg_WriteSync( pHwData, 0x03d0, ltmp );
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
+ Wb35Reg_WriteSync(pHwData, 0x03d0, ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
- msleep(20); // Modify 20051221.1.b
- Wb35Reg_ReadSync( pHwData, 0x03d0, <mp );
- loop = 500; // Wait for 5 second 20061101
- while( !(ltmp & 0x20) && loop-- )
- {
- msleep(10); // Modify 20051221.1.b
- if( !Wb35Reg_ReadSync( pHwData, 0x03d0, <mp ) )
+ msleep(20);
+ Wb35Reg_ReadSync(pHwData, 0x03d0, <mp);
+ loop = 500; /* Wait for 5 second */
+ while (!(ltmp & 0x20) && loop--) {
+ msleep(10);
+ if (!Wb35Reg_ReadSync(pHwData, 0x03d0, <mp))
break;
}
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
}
- Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- msleep(10); // Add this 20051221.1.b
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
+ msleep(10);
- // Set burst write delay
- Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff );
+ /* Set burst write delay */
+ Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
}
-void Set_ChanIndep_RfData_al7230_24( struct hw_data * pHwData, u32 *pltmp ,char number)
+void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp , char number)
{
u8 i;
- for( i=0; i<number; i++ )
- {
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al7230_rf_data_24[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i]&0xffffff);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i] & 0xffffff);
}
}
-void Set_ChanIndep_RfData_al7230_50( struct hw_data * pHwData, u32 *pltmp, char number)
+void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp, char number)
{
u8 i;
- for( i=0; i<number; i++ )
- {
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al7230_rf_data_50[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i]&0xffffff);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i] & 0xffffff);
}
}
-//=============================================================================================================
-// RFSynthesizer_initial --
-//=============================================================================================================
-void
-RFSynthesizer_initial(struct hw_data * pHwData)
+/*
+ * =============================================================================================================
+ * RFSynthesizer_initial --
+ * =============================================================================================================
+ */
+void RFSynthesizer_initial(struct hw_data *pHwData)
{
u32 altmp[32];
- u32 * pltmp = altmp;
+ u32 *pltmp = altmp;
u32 ltmp;
- u8 number=0x00; // The number of register vale
+ u8 number = 0x00; /* The number of register vale */
u8 i;
- //
- // bit[31] SPI Enable.
- // 1=perform synthesizer program operation. This bit will
- // cleared automatically after the operation is completed.
- // bit[30] SPI R/W Control
- // 0=write, 1=read
- // bit[29:24] SPI Data Format Length
- // bit[17:4 ] RF Data bits.
- // bit[3 :0 ] RF address.
- switch( pHwData->phy_type )
- {
+ /*
+ * bit[31] SPI Enable.
+ * 1=perform synthesizer program operation. This bit will
+ * cleared automatically after the operation is completed.
+ * bit[30] SPI R/W Control
+ * 0=write, 1=read
+ * bit[29:24] SPI Data Format Length
+ * bit[17:4 ] RF Data bits.
+ * bit[3 :0 ] RF address.
+ */
+ switch (pHwData->phy_type) {
case RF_MAXIM_2825:
- case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
- number = sizeof(max2825_rf_data)/sizeof(max2825_rf_data[0]);
- for( i=0; i<number; i++ )
- {
- pHwData->phy_para[i] = max2825_rf_data[i];// Backup Rf parameter
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_rf_data[i], 18);
+ case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
+ number = sizeof(max2825_rf_data) / sizeof(max2825_rf_data[0]);
+ for (i = 0; i < number; i++) {
+ pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2827:
- number = sizeof(max2827_rf_data)/sizeof(max2827_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2827_rf_data) / sizeof(max2827_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2827_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2828:
- number = sizeof(max2828_rf_data)/sizeof(max2828_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2828_rf_data) / sizeof(max2828_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2828_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2829:
- number = sizeof(max2829_rf_data)/sizeof(max2829_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2829_rf_data) / sizeof(max2829_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2829_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
}
break;
-
case RF_AIROHA_2230:
- number = sizeof(al2230_rf_data)/sizeof(al2230_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(al2230_rf_data) / sizeof(al2230_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[i], 20);
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
}
break;
-
case RF_AIROHA_2230S:
- number = sizeof(al2230s_rf_data)/sizeof(al2230s_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(al2230s_rf_data) / sizeof(al2230s_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230s_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230s_rf_data[i], 20);
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
}
break;
-
case RF_AIROHA_7230:
-
- //Start to fill RF parameters, PLL_ON should be pulled low.
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
-#ifdef _PE_STATE_DUMP_
+ /* Start to fill RF parameters, PLL_ON should be pulled low. */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
+ #ifdef _PE_STATE_DUMP_
printk("* PLL_ON low\n");
-#endif
-
- number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
+ #endif
+ number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
break;
-
case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
- number = sizeof(w89rf242_rf_data)/sizeof(w89rf242_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ case RF_WB_242_1:
+ number = sizeof(w89rf242_rf_data) / sizeof(w89rf242_rf_data[0]);
+ for (i = 0; i < number; i++) {
ltmp = w89rf242_rf_data[i];
- if( i == 4 ) // Update the VCO trim from EEPROM
- {
- ltmp &= ~0xff0; // Mask bit4 ~bit11
- ltmp |= pHwData->VCO_trim<<4;
+ if (i == 4) { /* Update the VCO trim from EEPROM */
+ ltmp &= ~0xff0; /* Mask bit4 ~bit11 */
+ ltmp |= pHwData->VCO_trim << 4;
}
pHwData->phy_para[i] = ltmp;
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( ltmp, 24);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(ltmp, 24);
}
break;
}
pHwData->phy_number = number;
- // The 16 is the maximum capability of hardware. Here use 12
- if( number > 12 ) {
- //Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 12, NO_INCREMENT );
- for( i=0; i<12; i++ ) // For Al2230
- Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
+ /* The 16 is the maximum capability of hardware. Here use 12 */
+ if (number > 12) {
+ for (i = 0; i < 12; i++) /* For Al2230 */
+ Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
pltmp += 12;
number -= 12;
}
- // Write to register. number must less and equal than 16
- for( i=0; i<number; i++ )
- Wb35Reg_WriteSync( pHwData, 0x864, pltmp[i] );
+ /* Write to register. number must less and equal than 16 */
+ for (i = 0; i < number; i++)
+ Wb35Reg_WriteSync(pHwData, 0x864, pltmp[i]);
- // 20060630.1 Calibration only 1 time
- if( pHwData->CalOneTime )
+ /* Calibration only 1 time */
+ if (pHwData->CalOneTime)
return;
pHwData->CalOneTime = 1;
- switch( pHwData->phy_type )
- {
- case RF_AIROHA_2230:
-
- // 20060511.1 --- Modifying the follow step for Rx issue-----------------
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(10);
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(10);
-
- case RF_AIROHA_2230S: // 20060420 Add this
-
- // 20060511.1 --- Modifying the follow step for Rx issue-----------------
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- msleep(10); // Modify 20051221.1.b
-
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
- msleep(10); // Modify 20051221.1.b
-
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
- Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- msleep(10); // Add this 20051221.1.b
- //------------------------------------------------------------------------
-
- // The follow code doesn't use the burst-write mode
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Raise Initial Setting
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- ltmp = pHwData->reg.BB5C & 0xfffff000;
- Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
- pHwData->reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify
- Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal.
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
-// //Force TXI(Q)P(N) to normal control
- Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->reg.BB5C );
- pHwData->reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);
- Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->reg.BB50);
- break;
-
- case RF_AIROHA_7230:
-
- //RF parameters have filled completely, PLL_ON should be
- //pulled high
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
-
- //2.4GHz
- //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
- //Wb35Reg_WriteSync pHwData, 0x0864, ltmp );
- //msleep(1); // Sleep 1 ms
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //5GHz
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON low\n");
- #endif
-
- number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
- Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
- // Write to register. number must less and equal than 16
- for( i=0; i<number; i++ )
- Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
- msleep(5);
-
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
-
- //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
- //Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- //printk("* PLL_ON high\n");
- break;
-
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
-
- //
- // ; Version 1.3B revision items: for FA5976A , October 3, 2005 by HTHo
- //
- ltmp = pHwData->reg.BB5C & 0xfffff000;
- Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
- Wb35Reg_WriteSync( pHwData, 0x1058, 0 );
- pHwData->reg.BB50 |= 0x3;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060630
- Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-
- //----- Calibration (1). VCO frequency calibration
- //Calibration (1a.0). Synthesizer reset (HTHo corrected 2005/05/10)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00101E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5); // Sleep 5ms
- //Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFE69c0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
-
- //----- Calibration (2). TX baseband Gm-C filter auto-tuning
- //Calibration (2a). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2b). send TX reset signal (HTHo corrected May 10, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00201E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2c). turn-on TX Gm-C filter auto-tuning
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFCEBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
- //turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //----- Calibration (3). RX baseband Gm-C filter auto-tuning
- //Calibration (3a). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default; July 26, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3b). send RX reset signal (HTHo corrected May 10, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00401E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3c). turn-on RX Gm-C filter auto-tuning
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFEEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
- //Calibration (3e). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //----- Calibration (4). TX LO leakage calibration
- //Calibration (4a). TX LO leakage calibration
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFD6BC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
-
- //----- Calibration (5). RX DC offset calibration
- //Calibration (5a). turn off ENCAL signal and set to RX SW DC caliration mode
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5b). turn off AGC servo-loop & RSSI
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEBFFC2, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=11 --------
- //Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x343FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=10 --------
- //Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x342FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=01 --------
- //Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x341FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=00 --------
- //Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x340FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5g). turn on AGC servo-loop
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEFFFC2, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; ----- Calibration (7). Switch RF chip to normal mode
- //0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode
-// msleep(10); // @@ 20060721
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF86100, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5); // Sleep 5 ms
-
-// //write back
-// Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
-// pHwData->reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix
-// Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-// msleep(1); // Sleep 1 ms
- break;
+ switch (pHwData->phy_type) {
+ case RF_AIROHA_2230:
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(10);
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(10);
+ case RF_AIROHA_2230S:
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
+ msleep(10);
+ /* ========================================================= */
+
+ /* The follow code doesn't use the burst-write mode */
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F<<20) | 0xF01A0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ ltmp = pHwData->reg.BB5C & 0xfffff000;
+ Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
+ pHwData->reg.BB50 |= 0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START) */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp) ;
+
+ Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
+ pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+ break;
+ case RF_AIROHA_7230:
+ /* RF parameters have filled completely, PLL_ON should be pulled high */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON high\n");
+ #endif
+
+ /* 2.4GHz */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ /* 5GHz */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON low\n");
+ #endif
+
+ number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
+ /* Write to register. number must less and equal than 16 */
+ for (i = 0; i < number; i++)
+ Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
+ msleep(5);
+
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON high\n");
+ #endif
+
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
+ /* for FA5976A */
+ ltmp = pHwData->reg.BB5C & 0xfffff000;
+ Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x1058, 0);
+ pHwData->reg.BB50 |= 0x3; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+
+ /* ----- Calibration (1). VCO frequency calibration */
+ /* Calibration (1a.0). Synthesizer reset */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ /* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+
+ /* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */
+ /* Calibration (2a). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default) */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2b). send TX reset signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00201E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2c). turn-on TX Gm-C filter auto-tuning */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFCEBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+ /* turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
+ /* Calibration (3a). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3b). send RX reset signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+ /* Calibration (3e). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (4). TX LO leakage calibration */
+ /* Calibration (4a). TX LO leakage calibration */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+
+ /* ----- Calibration (5). RX DC offset calibration */
+ /* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5b). turn off AGC servo-loop & RSSI */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=11 -------- */
+ /* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=10 -------- */
+ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=01 -------- */
+ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=00 -------- */
+ /* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5g). turn on AGC servo-loop */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (7). Switch RF chip to normal mode */
+ /* 0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ break;
}
}
-void BBProcessor_AL7230_2400( struct hw_data * pHwData)
+void BBProcessor_AL7230_2400(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 pltmp[12];
- pltmp[0] = 0x16A8337A; // 0x16a5215f; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFF9AA6; // 0x9aff9ca6; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFF72031; // 0xFfFf2138; // 0x100c AGC_Ctrl4
+ pltmp[0] = 0x16A8337A; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFF9AA6; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFF72031; /* 0x100c AGC_Ctrl4 */
reg->BB0C = 0xFFF72031;
- pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
- pltmp[5] = 0x00CAA333; // 0x00eaa333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF2211111; // 0x11111111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x06443440; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0xA8002A79; // 0xa9002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 20050927 0x40000228
- pltmp[11] = 0x232D7F30; // 0x23457f30;// 0x102c A_ACQ_Ctrl
+ pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF2211111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x06443440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0xA8002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232D7F30; /* 0x102c A_ACQ_Ctrl */
reg->BB2C = 0x232D7F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
- pltmp[0] = 0x00002c54; // 0x1030 B_ACQ_Ctrl
+ pltmp[0] = 0x00002c54; /* 0x1030 B_ACQ_Ctrl */
reg->BB30 = 0x00002c54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00332C1B; // 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0A00FEFF; // 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x2B106208; // 0x1050 MODE_Ctrl
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x2B106208; /* 0x1050 MODE_Ctrl */
reg->BB50 = 0x2B106208;
- pltmp[9] = 0; // 0x1054
+ pltmp[9] = 0; /* 0x1054 */
reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x64645252; // 0x1058 IQ_Alpha
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
}
-void BBProcessor_AL7230_5000( struct hw_data * pHwData)
+void BBProcessor_AL7230_5000(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 pltmp[12];
- pltmp[0] = 0x16AA6678; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFFA0B2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEFFF233E; // 0x100c AGC_Ctrl4
+ pltmp[0] = 0x16AA6678; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFFA0B2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEFFF233E; /* 0x100c AGC_Ctrl4 */
reg->BB0C = 0xEFFF233E;
- pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
- pltmp[5] = 0x00CAA333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF2432111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x05C43440; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 20050927 0x40000228
- pltmp[11] = 0x232FDF30;// 0x102c A_ACQ_Ctrl
+ pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF2432111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x05C43440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232FDF30;/* 0x102c A_ACQ_Ctrl */
reg->BB2C = 0x232FDF30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
- pltmp[0] = 0x80002C7C; // 0x1030 B_ACQ_Ctrl
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
+ pltmp[0] = 0x80002C7C; /* 0x1030 B_ACQ_Ctrl */
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00332C1B; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0A00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x2B107208; // 0x1050 MODE_Ctrl
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x2B107208; /* 0x1050 MODE_Ctrl */
reg->BB50 = 0x2B107208;
- pltmp[9] = 0; // 0x1054
+ pltmp[9] = 0; /* 0x1054 */
reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
}
-//=============================================================================================================
-// BBProcessorPowerupInit --
-//
-// Description:
-// Initialize the Baseband processor.
-//
-// Arguments:
-// pHwData - Handle of the USB Device.
-//
-// Return values:
-// None.
-//=============================================================================================================
-void
-BBProcessor_initial( struct hw_data * pHwData )
+/*
+ * ===========================================================================
+ * BBProcessorPowerupInit --
+ *
+ * Description:
+ * Initialize the Baseband processor.
+ *
+ * Arguments:
+ * pHwData - Handle of the USB Device.
+ *
+ * Return values:
+ * None.
+ *============================================================================
+ */
+void BBProcessor_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 i, pltmp[12];
- switch( pHwData->phy_type )
- {
- case RF_MAXIM_V1: // Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331)
-
- pltmp[0] = 0x16F47E77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFFAEA4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEFFF1A34; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xEFFF1A34;
- pltmp[4] = 0x0FABE0B7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00CAA332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF6632111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = (pHwData->phy_type==3) ? 0x40000a28 : 0x40000228; // 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0)
- pltmp[11] = 0x232FDF30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232FDF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- //------------------------------------------------------------------
- //[20040722 WK]
- //Only for baseband version 2
-// case RF_MAXIM_317:
- case RF_MAXIM_2825:
- case RF_MAXIM_2827:
- case RF_MAXIM_2828:
-
- pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xefff1a34; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xefff1a34;
- pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf6632111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x40000128; Modify for 33's 1.0.95
- pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0D00FDFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- case RF_MAXIM_2829:
-
- pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xf4ff1632; // 0xefff1a34; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95
- reg->BB0C = 0xf4ff1632; // 0xefff1a34; Modify for 33's 1.0.95
- pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf8632112; // 0xf6632111; // 0x1018 AGC_Ctrl7 Modify for 33's 1.0.95
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x40000128; modify for 33's 1.0.95
- pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5b2c8769; // 0x5B6C8769; // 0x1038 B_TXRX_Ctrl Modify for 33's 1.0.95
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x002c2617; // 0x00453B24; // 0x1048 11b TX RC filter Modify for 33's 1.0.95
- pltmp[7] = 0x0800feff; // 0x0D00FDFF; // 0x104c 11b TX RC filter Modify for 33's 1.0.95
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64644a4a; // 0x64646464; // 0x1058 IQ_Alpha Modify for 33's 1.0.95
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- case RF_AIROHA_2230:
-
- pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1 //0x16765A77
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
- reg->BB0C = 0xFFFd203c;
- pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
- pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
- pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7 //0xf6632112 Modify for 33's 1.0.95.xxx version
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0X40000528; //0x40000228
- pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl //0x232a9730
- reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl //0x5B6C8769
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
- pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1 20060613.2
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ switch (pHwData->phy_type) {
+ case RF_MAXIM_V1: /* Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
+ pltmp[0] = 0x16F47E77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFFAEA4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEFFF1A34; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xEFFF1A34;
+ pltmp[4] = 0x0FABE0B7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = (pHwData->phy_type == 3) ? 0x40000a28 : 0x40000228; /* 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0) */
+ pltmp[11] = 0x232FDF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232FDF30; /* Modify for 33's 1.0.95.xxx version, antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0E00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
- case RF_AIROHA_2230S: // 20060420 Add this
-
- pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1 //0x16765A77
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
- reg->BB0C = 0xFFFd203c;
- pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
- pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
- pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7 //0xf6632112 Modify for 33's 1.0.95.xxx version
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0X40000528; //0x40000228
- pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl //0x232a9730
- reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl //0x5B6C8769
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
- pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x52523232; // 20060419 0x52524242; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52523232; // 20060419 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ case RF_MAXIM_2825:
+ case RF_MAXIM_2827:
+ case RF_MAXIM_2828:
+ pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xefff1a34; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xefff1a34;
+ pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xf6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232fdf30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0D00FDFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
- case RF_AIROHA_7230:
-/*
- pltmp[0] = 0x16a84a77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFb203a; // 0x100c AGC_Ctrl4
- reg->BB0c = 0xFFFb203a;
- pltmp[4] = 0x0FBFDCB7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf6632112; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000228;
- pltmp[11] = 0x232A9F30;// 0x102c A_ACQ_Ctrl
- reg->BB2c = 0x232A9F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3c = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64645252; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64645252;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-*/
- BBProcessor_AL7230_2400( pHwData );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ case RF_MAXIM_2829:
+ pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xf4ff1632; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xf4ff1632;
+ pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xf8632112; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232fdf30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5b2c8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x002c2617; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0800feff; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64644a4a; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_2230:
+ pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xFFFd203c;
+ pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0X40000528;
+ pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232dfF30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_AL2230_11G; /* 20051221 ch14 */
+ pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_AL2230_11G;
+ pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106200;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52524242;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_2230S:
+ pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xFFFd203c;
+ pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0X40000528;
+ pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232dfF30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_AL2230_11G; /* ch14 */
+ pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_AL2230_11G;
+ pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106200;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x52523232; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52523232;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_7230:
+ BBProcessor_AL7230_2400(pHwData);
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
-
- pltmp[0] = 0x16A8525D; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFF9ABA; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEEE91C32; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xEEE91C32;
- pltmp[4] = 0x0FACDCC5; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x000AA344; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0x22222221; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3440; // 20051018 0x03CB3440; // 0x1020 AGC_Ctrl9 20051014 0x03C33440
- pltmp[9] = 0xA9002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x1028
- pltmp[11] = 0x23457F30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x23457F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = pHwData->BB3c_cal; // 0x103c 11a TX LS filter
- reg->BB3C = pHwData->BB3c_cal;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_WB242_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_WB242_11G; // 20060613.1 20060613.2
- pltmp[7] = BB4C_DEFAULT_WB242_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_WB242_11G; // 20060613.1 20060613.2
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = pHwData->BB54_cal; // 0x1054
- reg->BB54 = pHwData->BB54_cal;
- pltmp[10] = 0x52523131; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52523131;
- pltmp[11] = 0xAA0AC000; // 20060825 0xAA2AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
- }
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
+ pltmp[0] = 0x16A8525D; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFF9ABA; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEEE91C32; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xEEE91C32;
+ pltmp[4] = 0x0FACDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x000AA344; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0x22222221; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0xA9002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528; /* 0x1028 */
+ pltmp[11] = 0x23457F30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x23457F30;
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = pHwData->BB3c_cal; /* 0x103c 11a TX LS filter */
+ reg->BB3C = pHwData->BB3c_cal;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_WB242_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_WB242_11G;
+ pltmp[7] = BB4C_DEFAULT_WB242_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_WB242_11G;
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = pHwData->BB54_cal; /* 0x1054 */
+ reg->BB54 = pHwData->BB54_cal;
+ pltmp[10] = 0x52523131; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52523131;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ }
- // Fill the LNA table
- reg->LNAValue[0] = (u8)(reg->BB0C & 0xff);
+ /* Fill the LNA table */
+ reg->LNAValue[0] = (u8) (reg->BB0C & 0xff);
reg->LNAValue[1] = 0;
- reg->LNAValue[2] = (u8)((reg->BB0C & 0xff00)>>8);
+ reg->LNAValue[2] = (u8) ((reg->BB0C & 0xff00) >> 8);
reg->LNAValue[3] = 0;
- // Fill SQ3 table
- for( i=0; i<MAX_SQ3_FILTER_SIZE; i++ )
- reg->SQ3_filter[i] = 0x2f; // half of Bit 0 ~ 6
+ /* Fill SQ3 table */
+ for (i = 0; i < MAX_SQ3_FILTER_SIZE; i++)
+ reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */
}
-void set_tx_power_per_channel_max2829( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_max2829(struct hw_data *pHwData, struct chan_info Channel)
{
- RFSynthesizer_SetPowerIndex( pHwData, 100 ); // 20060620.1 Modify
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
}
-void set_tx_power_per_channel_al2230( struct hw_data * pHwData, struct chan_info Channel )
+void set_tx_power_per_channel_al2230(struct hw_data *pHwData, struct chan_info Channel)
{
u8 index = 100;
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) // 20060620.1 Add
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-void set_tx_power_per_channel_al7230( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_al7230(struct hw_data *pHwData, struct chan_info Channel)
{
u8 i, index = 100;
- switch ( Channel.band )
- {
- case BAND_TYPE_DSSS:
- case BAND_TYPE_OFDM_24:
- {
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
- index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- }
- break;
- case BAND_TYPE_OFDM_5:
- {
- for (i =0; i<35; i++)
- {
- if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo)
- {
- if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
- index = pHwData->TxVgaFor50[i].TxVgaValue;
- break;
- }
- }
+ switch (Channel.band) {
+ case BAND_TYPE_DSSS:
+ case BAND_TYPE_OFDM_24:
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
+ index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
+ break;
+ case BAND_TYPE_OFDM_5:
+ for (i = 0; i < 35; i++) {
+ if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo) {
+ if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
+ index = pHwData->TxVgaFor50[i].TxVgaValue;
+ break;
}
- break;
+ }
+ break;
}
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-void set_tx_power_per_channel_wb242( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_wb242(struct hw_data *pHwData, struct chan_info Channel)
{
u8 index = 100;
- switch ( Channel.band )
- {
- case BAND_TYPE_DSSS:
- case BAND_TYPE_OFDM_24:
- {
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
- index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- }
- break;
- case BAND_TYPE_OFDM_5:
- break;
+ switch (Channel.band) {
+ case BAND_TYPE_DSSS:
+ case BAND_TYPE_OFDM_24:
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
+ index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
+ break;
+ case BAND_TYPE_OFDM_5:
+ break;
}
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-//=============================================================================================================
-// RFSynthesizer_SwitchingChannel --
-//
-// Description:
-// Swithch the RF channel.
-//
-// Arguments:
-// pHwData - Handle of the USB Device.
-// Channel - The channel no.
-//
-// Return values:
-// None.
-//=============================================================================================================
-void
-RFSynthesizer_SwitchingChannel( struct hw_data * pHwData, struct chan_info Channel )
+/*
+ * ==========================================================================
+ * RFSynthesizer_SwitchingChannel --
+ *
+ * Description:
+ * Swithch the RF channel.
+ *
+ * Arguments:
+ * pHwData - Handle of the USB Device.
+ * Channel - The channel no.
+ *
+ * Return values:
+ * None.
+ * ===========================================================================
+ */
+void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info Channel)
{
struct wb35_reg *reg = &pHwData->reg;
- u32 pltmp[16]; // The 16 is the maximum capability of hardware
+ u32 pltmp[16]; /* The 16 is the maximum capability of hardware */
u32 count, ltmp;
u8 i, j, number;
u8 ChnlTmp;
- switch( pHwData->phy_type )
- {
- case RF_MAXIM_2825:
- case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2827:
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
- {
- ChnlTmp = (Channel.ChanNo - 36) / 4;
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_50[ChnlTmp][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2828:
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
- {
- ChnlTmp = (Channel.ChanNo - 36) / 4;
- for ( i = 0; i < 3; i++)
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_50[ChnlTmp][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2829:
+ switch (pHwData->phy_type) {
+ case RF_MAXIM_2825:
+ case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
- if( Channel.band <= BAND_TYPE_OFDM_24)
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 )
- {
- count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
-
- for( i=0; i<count; i++ )
- {
- if( max2829_channel_data_50[i][0] == Channel.ChanNo )
- {
- for( j=0; j<3; j++ )
- pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_50[i][j+1], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
-
- if( (max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946 )
- {
- ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A906, 18);
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- else // 0x2A9C6
- {
- ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A986, 18);
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2827:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
+ ChnlTmp = (Channel.ChanNo - 36) / 4;
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_50[ChnlTmp][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2828:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
+ ChnlTmp = (Channel.ChanNo - 36) / 4;
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_50[ChnlTmp][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2829:
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
+
+ for (i = 0; i < count; i++) {
+ if (max2829_channel_data_50[i][0] == Channel.ChanNo) {
+ for (j = 0; j < 3; j++)
+ pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_50[i][j+1], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+
+ if ((max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946) {
+ ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A906, 18);
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
+ } else { /* 0x2A9C6 */
+ ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A986, 18);
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
}
}
}
- set_tx_power_per_channel_max2829( pHwData, Channel );
- break;
-
- case RF_AIROHA_2230:
- case RF_AIROHA_2230S: // 20060420 Add this
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- for( i=0; i<2; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_channel_data_24[Channel.ChanNo-1][i], 20);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
+ }
+ set_tx_power_per_channel_max2829(pHwData, Channel);
+ break;
+ case RF_AIROHA_2230:
+ case RF_AIROHA_2230S:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ for (i = 0; i < 2; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_channel_data_24[Channel.ChanNo-1][i], 20);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
+ }
+ set_tx_power_per_channel_al2230(pHwData, Channel);
+ break;
+ case RF_AIROHA_7230:
+ /* Channel independent registers */
+ if (Channel.band != pHwData->band) {
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ /* Update BB register */
+ BBProcessor_AL7230_2400(pHwData);
+
+ number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+ Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
+ } else {
+ /* Update BB register */
+ BBProcessor_AL7230_5000(pHwData);
+
+ number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
}
- set_tx_power_per_channel_al2230( pHwData, Channel );
- break;
- case RF_AIROHA_7230:
-
- //Start to fill RF parameters, PLL_ON should be pulled low.
- //Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
- //printk("* PLL_ON low\n");
-
- //Channel independent registers
- if( Channel.band != pHwData->band)
- {
- if (Channel.band <= BAND_TYPE_OFDM_24)
- {
- //Update BB register
- BBProcessor_AL7230_2400(pHwData);
-
- number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
- Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
- }
- else
- {
- //Update BB register
- BBProcessor_AL7230_5000(pHwData);
-
- number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
- Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
- }
-
- // Write to register. number must less and equal than 16
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
- #ifdef _PE_STATE_DUMP_
- printk("Band changed\n");
- #endif
- }
+ /* Write to register. number must less and equal than 16 */
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT);
+ #ifdef _PE_STATE_DUMP_
+ printk("Band changed\n");
+ #endif
+ }
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- for( i=0; i<2; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ for (i = 0; i < 2; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ /* Update Reg12 */
+ if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165)) {
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
+ } else { /* reg12 = 0x00147c at Channel 4920 ~ 5320 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
}
- else if( Channel.band == BAND_TYPE_OFDM_5 )
- {
- //Update Reg12
- if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165))
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- else //reg12 = 0x00147c at Channel 4920 ~ 5320
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
+ count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
- for (i=0; i<count; i++)
- {
- if (al7230_channel_data_5[i][0] == Channel.ChanNo)
- {
- for( j=0; j<3; j++ )
- pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | ( al7230_channel_data_5[i][j+1]&0xffffff);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
+ for (i = 0; i < count; i++) {
+ if (al7230_channel_data_5[i][0] == Channel.ChanNo) {
+ for (j = 0; j < 3; j++)
+ pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_5[i][j+1] & 0xffffff);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
}
}
- set_tx_power_per_channel_al7230(pHwData, Channel);
- break;
-
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
+ }
+ set_tx_power_per_channel_al7230(pHwData, Channel);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
- Wb35Reg_Write( pHwData, 0x864, ltmp );
- }
- set_tx_power_per_channel_wb242(pHwData, Channel);
- break;
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
+ Wb35Reg_Write(pHwData, 0x864, ltmp);
+ }
+ set_tx_power_per_channel_wb242(pHwData, Channel);
+ break;
}
- if( Channel.band <= BAND_TYPE_OFDM_24 )
- {
- // BB: select 2.4 GHz, bit[12-11]=00
- reg->BB50 &= ~(BIT(11)|BIT(12));
- Wb35Reg_Write( pHwData, 0x1050, reg->BB50 ); // MODE_Ctrl
- // MAC: select 2.4 GHz, bit[5]=0
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ /* BB: select 2.4 GHz, bit[12-11]=00 */
+ reg->BB50 &= ~(BIT(11) | BIT(12));
+ Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
+ /* MAC: select 2.4 GHz, bit[5]=0 */
reg->M78_ERPInformation &= ~BIT(5);
- Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );
- // enable 11b Baseband
+ Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
+ /* enable 11b Baseband */
reg->BB30 &= ~BIT(31);
- Wb35Reg_Write( pHwData, 0x1030, reg->BB30 );
- }
- else if( (Channel.band == BAND_TYPE_OFDM_5) )
- {
- // BB: select 5 GHz
- reg->BB50 &= ~(BIT(11)|BIT(12));
- if (Channel.ChanNo <=64 )
- reg->BB50 |= BIT(12); // 10-5.25GHz
+ Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ /* BB: select 5 GHz */
+ reg->BB50 &= ~(BIT(11) | BIT(12));
+ if (Channel.ChanNo <= 64)
+ reg->BB50 |= BIT(12); /* 10-5.25GHz */
else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124))
- reg->BB50 |= BIT(11); // 01-5.48GHz
- else if ((Channel.ChanNo >=128) && (Channel.ChanNo <= 161))
- reg->BB50 |= (BIT(12)|BIT(11)); // 11-5.775GHz
- else //Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25
+ reg->BB50 |= BIT(11); /* 01-5.48GHz */
+ else if ((Channel.ChanNo >= 128) && (Channel.ChanNo <= 161))
+ reg->BB50 |= (BIT(12) | BIT(11)); /* 11-5.775GHz */
+ else /* Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25 */
reg->BB50 |= BIT(12);
- Wb35Reg_Write( pHwData, 0x1050, reg->BB50 ); // MODE_Ctrl
+ Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
- //(1) M78 should alway use 2.4G setting when using RF_AIROHA_7230
- //(2) BB30 has been updated previously.
- if (pHwData->phy_type != RF_AIROHA_7230)
- {
- // MAC: select 5 GHz, bit[5]=1
+ /* (1) M78 should alway use 2.4G setting when using RF_AIROHA_7230 */
+ /* (2) BB30 has been updated previously. */
+ if (pHwData->phy_type != RF_AIROHA_7230) {
+ /* MAC: select 5 GHz, bit[5]=1 */
reg->M78_ERPInformation |= BIT(5);
- Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );
+ Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
- // disable 11b Baseband
+ /* disable 11b Baseband */
reg->BB30 |= BIT(31);
- Wb35Reg_Write( pHwData, 0x1030, reg->BB30 );
+ Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
}
}
}
-//Set the tx power directly from DUT GUI, not from the EEPROM. Return the current setting
-u8 RFSynthesizer_SetPowerIndex( struct hw_data * pHwData, u8 PowerIndex )
+/*
+ * Set the tx power directly from DUT GUI, not from the EEPROM.
+ * Return the current setting
+ */
+u8 RFSynthesizer_SetPowerIndex(struct hw_data *pHwData, u8 PowerIndex)
{
u32 Band = pHwData->band;
- u8 index=0;
+ u8 index = 0;
- if( pHwData->power_index == PowerIndex ) // 20060620.1 Add
+ if (pHwData->power_index == PowerIndex)
return PowerIndex;
- if (RF_MAXIM_2825 == pHwData->phy_type)
- {
- // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2825Power( pHwData, PowerIndex );
- }
- else if (RF_MAXIM_2827 == pHwData->phy_type)
- {
- if( Band <= BAND_TYPE_OFDM_24 ) // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2827_24Power( pHwData, PowerIndex );
- else// if( Band == BAND_TYPE_OFDM_5 ) // Channel 36 - 64
- index = RFSynthesizer_SetMaxim2827_50Power( pHwData, PowerIndex );
- }
- else if (RF_MAXIM_2828 == pHwData->phy_type)
- {
- if( Band <= BAND_TYPE_OFDM_24 ) // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2828_24Power( pHwData, PowerIndex );
- else// if( Band == BAND_TYPE_OFDM_5 ) // Channel 36 - 64
- index = RFSynthesizer_SetMaxim2828_50Power( pHwData, PowerIndex );
- }
- else if( RF_AIROHA_2230 == pHwData->phy_type )
- {
- //Power index: 0 ~ 63 // Channel 1 - 14
- index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
- index = (u8)al2230_txvga_data[index][1];
- }
- else if( RF_AIROHA_2230S == pHwData->phy_type ) // 20060420 Add this
- {
- //Power index: 0 ~ 63 // Channel 1 - 14
- index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
- index = (u8)al2230_txvga_data[index][1];
- }
- else if( RF_AIROHA_7230 == pHwData->phy_type )
- {
- //Power index: 0 ~ 63
- index = RFSynthesizer_SetAiroha7230Power( pHwData, PowerIndex );
+ if (RF_MAXIM_2825 == pHwData->phy_type) {
+ /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2825Power(pHwData, PowerIndex);
+ } else if (RF_MAXIM_2827 == pHwData->phy_type) {
+ if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2827_24Power(pHwData, PowerIndex);
+ else /* Channel 36 - 64 */
+ index = RFSynthesizer_SetMaxim2827_50Power(pHwData, PowerIndex);
+ } else if (RF_MAXIM_2828 == pHwData->phy_type) {
+ if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2828_24Power(pHwData, PowerIndex);
+ else /* Channel 36 - 64 */
+ index = RFSynthesizer_SetMaxim2828_50Power(pHwData, PowerIndex);
+ } else if (RF_AIROHA_2230 == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 --- Channel 1 - 14 */
+ index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
+ index = (u8) al2230_txvga_data[index][1];
+ } else if (RF_AIROHA_2230S == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 --- Channel 1 - 14 */
+ index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
+ index = (u8) al2230_txvga_data[index][1];
+ } else if (RF_AIROHA_7230 == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 */
+ index = RFSynthesizer_SetAiroha7230Power(pHwData, PowerIndex);
index = (u8)al7230_txvga_data[index][1];
- }
- else if( (RF_WB_242 == pHwData->phy_type) ||
- (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
- {
- //Power index: 0 ~ 19 for original. New range is 0 ~ 33
- index = RFSynthesizer_SetWinbond242Power( pHwData, PowerIndex );
+ } else if ((RF_WB_242 == pHwData->phy_type) ||
+ (RF_WB_242_1 == pHwData->phy_type)) {
+ /* Power index: 0 ~ 19 for original. New range is 0 ~ 33 */
+ index = RFSynthesizer_SetWinbond242Power(pHwData, PowerIndex);
index = (u8)w89rf242_txvga_data[index][1];
}
- pHwData->power_index = index; // Backup current
+ pHwData->power_index = index; /* Backup current */
return index;
}
-//-- Sub function
-u8 RFSynthesizer_SetMaxim2828_24Power( struct hw_data * pHwData, u8 index )
+/* -- Sub function */
+u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2828_50Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_50[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_50[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2827_24Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2827_50Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_50[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_50[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2825Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetAiroha2230Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
count = sizeof(al2230_txvga_data) / sizeof(al2230_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (al2230_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_txvga_data[i][0], 20);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_txvga_data[i][0], 20);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return i;
}
-//--
-u8 RFSynthesizer_SetAiroha7230Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
- //PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( airoha_power_data_24[index], 20);
count = sizeof(al7230_txvga_data) / sizeof(al7230_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (al7230_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0]&0xffffff);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0] & 0xffffff);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return i;
}
-u8 RFSynthesizer_SetWinbond242Power( struct hw_data * pHwData, u8 index )
+u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
count = sizeof(w89rf242_txvga_data) / sizeof(w89rf242_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (w89rf242_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- // Set TxVga into RF
- PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_txvga_data[i][0], 24);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
-
- // Update BB48 BB4C BB58 for high precision txvga
- Wb35Reg_Write( pHwData, 0x1048, w89rf242_txvga_data[i][2] );
- Wb35Reg_Write( pHwData, 0x104c, w89rf242_txvga_data[i][3] );
- Wb35Reg_Write( pHwData, 0x1058, w89rf242_txvga_data[i][4] );
-
-// Rf vga 0 ~ 3 for temperature compensate. It will affect the scan Bss.
-// The i value equals to 8 or 7 usually. So It's not necessary to setup this RF register.
-// if( i <= 3 )
-// PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x000024, 24 );
-// else
-// PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x001824, 24 );
-// Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ /* Set TxVga into RF */
+ PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_txvga_data[i][0], 24);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
+
+ /* Update BB48 BB4C BB58 for high precision txvga */
+ Wb35Reg_Write(pHwData, 0x1048, w89rf242_txvga_data[i][2]);
+ Wb35Reg_Write(pHwData, 0x104c, w89rf242_txvga_data[i][3]);
+ Wb35Reg_Write(pHwData, 0x1058, w89rf242_txvga_data[i][4]);
+
return i;
}
-//===========================================================================================================
-// Dxx_initial --
-// Mxx_initial --
- //
-// Routine Description:
-// Initial the hardware setting and module variable
- //
-//===========================================================================================================
-void Dxx_initial( struct hw_data * pHwData )
+/*
+ * ===========================================================================
+ * Dxx_initial --
+ * Mxx_initial --
+ *
+ * Routine Description:
+ * Initial the hardware setting and module variable
+ * ===========================================================================
+ */
+void Dxx_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
- // Old IC:Single mode only.
- // New IC: operation decide by Software set bit[4]. 1:multiple 0: single
- reg->D00_DmaControl = 0xc0000004; //Txon, Rxon, multiple Rx for new 4k DMA
- //Txon, Rxon, single Rx for old 8k ASIC
- if( !HAL_USB_MODE_BURST( pHwData ) )
- reg->D00_DmaControl = 0xc0000000;//Txon, Rxon, single Rx for new 4k DMA
+ /*
+ * Old IC: Single mode only.
+ * New IC: operation decide by Software set bit[4]. 1:multiple 0: single
+ */
+ reg->D00_DmaControl = 0xc0000004; /* Txon, Rxon, multiple Rx for new 4k DMA */
+ /* Txon, Rxon, single Rx for old 8k ASIC */
+ if (!HAL_USB_MODE_BURST(pHwData))
+ reg->D00_DmaControl = 0xc0000000; /* Txon, Rxon, single Rx for new 4k DMA */
- Wb35Reg_WriteSync( pHwData, 0x0400, reg->D00_DmaControl );
+ Wb35Reg_WriteSync(pHwData, 0x0400, reg->D00_DmaControl);
}
-void Mxx_initial( struct hw_data * pHwData )
+void Mxx_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
- u32 tmp;
- u32 pltmp[11];
+ u32 tmp;
+ u32 pltmp[11];
u16 i;
- //======================================================
- // Initial Mxx register
- //======================================================
+ /*
+ * ======================================================
+ * Initial Mxx register
+ * ======================================================
+ */
- // M00 bit set
-#ifdef _IBSS_BEACON_SEQ_STICK_
- reg->M00_MacControl = 0; // Solve beacon sequence number stop by software
-#else
- reg->M00_MacControl = 0x80000000; // Solve beacon sequence number stop by hardware
-#endif
+ /* M00 bit set */
+ #ifdef _IBSS_BEACON_SEQ_STICK_
+ reg->M00_MacControl = 0; /* Solve beacon sequence number stop by software */
+ #else
+ reg->M00_MacControl = 0x80000000; /* Solve beacon sequence number stop by hardware */
+ #endif
- // M24 disable enter power save, BB RxOn and enable NAV attack
+ /* M24 disable enter power save, BB RxOn and enable NAV attack */
reg->M24_MacControl = 0x08040042;
pltmp[0] = reg->M24_MacControl;
- pltmp[1] = 0; // Skip M28, because no initialize value is required.
+ pltmp[1] = 0; /* Skip M28, because no initialize value is required. */
- // M2C CWmin and CWmax setting
+ /* M2C CWmin and CWmax setting */
pHwData->cwmin = DEFAULT_CWMIN;
pHwData->cwmax = DEFAULT_CWMAX;
reg->M2C_MacControl = DEFAULT_CWMIN << 10;
reg->M2C_MacControl |= DEFAULT_CWMAX;
pltmp[2] = reg->M2C_MacControl;
- // M30 BSSID
+ /* M30 BSSID */
pltmp[3] = *(u32 *)pHwData->bssid;
- // M34
+ /* M34 */
pHwData->AID = DEFAULT_AID;
- tmp = *(u16 *)(pHwData->bssid+4);
+ tmp = *(u16 *) (pHwData->bssid + 4);
tmp |= DEFAULT_AID << 16;
pltmp[4] = tmp;
- // M38
- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT<<8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
+ /* M38 */
+ reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
pltmp[5] = reg->M38_MacControl;
- // M3C
+ /* M3C */
tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST ;
reg->M3C_MacControl = tmp;
pltmp[6] = tmp;
- // M40
+ /* M40 */
pHwData->slot_time_select = DEFAULT_SLOT_TIME;
tmp = (DEFAULT_ATIMWD << 16) | DEFAULT_SLOT_TIME;
reg->M40_MacControl = tmp;
pltmp[7] = tmp;
- // M44
- tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; // *1024
+ /* M44 */
+ tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; /* *1024 */
reg->M44_MacControl = tmp;
pltmp[8] = tmp;
- // M48
+ /* M48 */
pHwData->BeaconPeriod = DEFAULT_BEACON_INTERVAL;
pHwData->ProbeDelay = DEFAULT_PROBE_DELAY_TIME;
tmp = (DEFAULT_BEACON_INTERVAL << 16) | DEFAULT_PROBE_DELAY_TIME;
reg->M48_MacControl = tmp;
pltmp[9] = tmp;
- //M4C
+ /* M4C */
reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
pltmp[10] = reg->M4C_MacStatus;
- // Burst write
- //Wb35Reg_BurstWrite( pHwData, 0x0824, pltmp, 11, AUTO_INCREMENT );
- for( i=0; i<11; i++ )
- Wb35Reg_WriteSync( pHwData, 0x0824 + i*4, pltmp[i] );
+ for (i = 0; i < 11; i++)
+ Wb35Reg_WriteSync(pHwData, 0x0824 + i * 4, pltmp[i]);
- // M60
- Wb35Reg_WriteSync( pHwData, 0x0860, 0x12481248 );
+ /* M60 */
+ Wb35Reg_WriteSync(pHwData, 0x0860, 0x12481248);
reg->M60_MacControl = 0x12481248;
- // M68
- Wb35Reg_WriteSync( pHwData, 0x0868, 0x00050900 ); // 20051018 0x000F0F00 ); // 940930 0x00131300
+ /* M68 */
+ Wb35Reg_WriteSync(pHwData, 0x0868, 0x00050900);
reg->M68_MacControl = 0x00050900;
- // M98
- Wb35Reg_WriteSync( pHwData, 0x0898, 0xffff8888 );
+ /* M98 */
+ Wb35Reg_WriteSync(pHwData, 0x0898, 0xffff8888);
reg->M98_MacControl = 0xffff8888;
}
-void Uxx_power_off_procedure( struct hw_data * pHwData )
+void Uxx_power_off_procedure(struct hw_data *pHwData)
{
- // SW, PMU reset and turn off clock
- Wb35Reg_WriteSync( pHwData, 0x03b0, 3 );
- Wb35Reg_WriteSync( pHwData, 0x03f0, 0xf9 );
+ /* SW, PMU reset and turn off clock */
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 3);
+ Wb35Reg_WriteSync(pHwData, 0x03f0, 0xf9);
}
-//Decide the TxVga of every channel
-void GetTxVgaFromEEPROM( struct hw_data * pHwData )
+/*Decide the TxVga of every channel */
+void GetTxVgaFromEEPROM(struct hw_data *pHwData)
{
- u32 i, j, ltmp;
- u16 Value[MAX_TXVGA_EEPROM];
- u8 *pctmp;
- u8 ctmp=0;
-
- // Get the entire TxVga setting in EEPROM
- for( i=0; i<MAX_TXVGA_EEPROM; i++ )
- {
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08100000 + 0x00010000*i );
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- Value[i] = (u16)( ltmp & 0xffff ); // Get 16 bit available
- Value[i] = cpu_to_le16( Value[i] ); // [7:0]2412 [7:0]2417 ....
+ u32 i, j, ltmp;
+ u16 Value[MAX_TXVGA_EEPROM];
+ u8 *pctmp;
+ u8 ctmp = 0;
+
+ /* Get the entire TxVga setting in EEPROM */
+ for (i = 0; i < MAX_TXVGA_EEPROM; i++) {
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000 + 0x00010000 * i);
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ Value[i] = (u16) (ltmp & 0xffff); /* Get 16 bit available */
+ Value[i] = cpu_to_le16(Value[i]); /* [7:0]2412 [7:0]2417 .... */
}
- // Adjust the filed which fills with reserved value.
- pctmp = (u8 *)Value;
- for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ )
- {
- if( pctmp[i] != 0xff )
+ /* Adjust the filed which fills with reserved value. */
+ pctmp = (u8 *) Value;
+ for (i = 0; i < (MAX_TXVGA_EEPROM * 2); i++) {
+ if (pctmp[i] != 0xff)
ctmp = pctmp[i];
else
pctmp[i] = ctmp;
}
- // Adjust WB_242 to WB_242_1 TxVga scale
- if( pHwData->phy_type == RF_WB_242 )
- {
- for( i=0; i<4; i++ ) // Only 2412 2437 2462 2484 case must be modified
- {
- for( j=0; j<(sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])); j++ )
- {
- if( pctmp[i] < (u8)w89rf242_txvga_old_mapping[j][1] )
- {
- pctmp[i] = (u8)w89rf242_txvga_old_mapping[j][0];
+ /* Adjust WB_242 to WB_242_1 TxVga scale */
+ if (pHwData->phy_type == RF_WB_242) {
+ for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */
+ for (j = 0; j < (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])); j++) {
+ if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) {
+ pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0];
break;
}
}
- if( j == (sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])) )
+ if (j == (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])))
pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
}
}
- // 20060621 Add
- memcpy( pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM*2 ); //MAX_TXVGA_EEPROM is u16 count
- EEPROMTxVgaAdjust( pHwData );
+ memcpy(pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM * 2); /* MAX_TXVGA_EEPROM is u16 count */
+ EEPROMTxVgaAdjust(pHwData);
}
-// This function will affect the TxVga parameter in HAL. If hal_set_current_channel
-// or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
-// TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
-// This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
-void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
+/*
+ * This function will affect the TxVga parameter in HAL. If hal_set_current_channel
+ * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
+ * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
+ * This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
+ */
+void EEPROMTxVgaAdjust(struct hw_data *pHwData)
{
- u8 * pTxVga = pHwData->TxVgaSettingInEEPROM;
- s16 i, stmp;
+ u8 *pTxVga = pHwData->TxVgaSettingInEEPROM;
+ s16 i, stmp;
- //-- 2.4G -- 20060704.2 Request from Tiger
- //channel 1 ~ 5
+ /* -- 2.4G -- */
+ /* channel 1 ~ 5 */
stmp = pTxVga[1] - pTxVga[0];
- for( i=0; i<5; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[0] + stmp*i/4;
- //channel 6 ~ 10
+ for (i = 0; i < 5; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[0] + stmp * i / 4;
+ /* channel 6 ~ 10 */
stmp = pTxVga[2] - pTxVga[1];
- for( i=5; i<10; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[1] + stmp*(i-5)/4;
- //channel 11 ~ 13
+ for (i = 5; i < 10; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[1] + stmp * (i - 5) / 4;
+ /* channel 11 ~ 13 */
stmp = pTxVga[3] - pTxVga[2];
- for( i=10; i<13; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[2] + stmp*(i-10)/2;
- //channel 14
+ for (i = 10; i < 13; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[2] + stmp * (i - 10) / 2;
+ /* channel 14 */
pHwData->TxVgaFor24[13] = pTxVga[3];
- //-- 5G --
- if( pHwData->phy_type == RF_AIROHA_7230 )
- {
- //channel 184
+ /* -- 5G -- */
+ if (pHwData->phy_type == RF_AIROHA_7230) {
+ /* channel 184 */
pHwData->TxVgaFor50[0].ChanNo = 184;
pHwData->TxVgaFor50[0].TxVgaValue = pTxVga[4];
- //channel 196
+ /* channel 196 */
pHwData->TxVgaFor50[3].ChanNo = 196;
pHwData->TxVgaFor50[3].TxVgaValue = pTxVga[5];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[1].ChanNo = 188;
pHwData->TxVgaFor50[2].ChanNo = 192;
stmp = pTxVga[5] - pTxVga[4];
- pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp/3;
- pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp*2/3;
+ pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp / 3;
+ pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp * 2 / 3;
- //channel 16
+ /* channel 16 */
pHwData->TxVgaFor50[6].ChanNo = 16;
pHwData->TxVgaFor50[6].TxVgaValue = pTxVga[6];
pHwData->TxVgaFor50[4].ChanNo = 8;
@@ -2523,7 +2250,7 @@ void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
pHwData->TxVgaFor50[5].ChanNo = 12;
pHwData->TxVgaFor50[5].TxVgaValue = pTxVga[6];
- //channel 36
+ /* channel 36 */
pHwData->TxVgaFor50[8].ChanNo = 36;
pHwData->TxVgaFor50[8].TxVgaValue = pTxVga[7];
pHwData->TxVgaFor50[7].ChanNo = 34;
@@ -2531,153 +2258,135 @@ void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
pHwData->TxVgaFor50[9].ChanNo = 38;
pHwData->TxVgaFor50[9].TxVgaValue = pTxVga[7];
- //channel 40
+ /* channel 40 */
pHwData->TxVgaFor50[10].ChanNo = 40;
pHwData->TxVgaFor50[10].TxVgaValue = pTxVga[8];
- //channel 48
+ /* channel 48 */
pHwData->TxVgaFor50[14].ChanNo = 48;
pHwData->TxVgaFor50[14].TxVgaValue = pTxVga[9];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[11].ChanNo = 42;
pHwData->TxVgaFor50[12].ChanNo = 44;
pHwData->TxVgaFor50[13].ChanNo = 46;
stmp = pTxVga[9] - pTxVga[8];
- pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp/4;
- pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp*2/4;
- pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp*3/4;
+ pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp / 4;
+ pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp * 3 / 4;
- //channel 52
+ /* channel 52 */
pHwData->TxVgaFor50[15].ChanNo = 52;
pHwData->TxVgaFor50[15].TxVgaValue = pTxVga[10];
- //channel 64
+ /* channel 64 */
pHwData->TxVgaFor50[18].ChanNo = 64;
pHwData->TxVgaFor50[18].TxVgaValue = pTxVga[11];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[16].ChanNo = 56;
pHwData->TxVgaFor50[17].ChanNo = 60;
stmp = pTxVga[11] - pTxVga[10];
- pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp/3;
- pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp*2/3;
+ pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp / 3;
+ pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp * 2 / 3;
- //channel 100
+ /* channel 100 */
pHwData->TxVgaFor50[19].ChanNo = 100;
pHwData->TxVgaFor50[19].TxVgaValue = pTxVga[12];
- //channel 112
+ /* channel 112 */
pHwData->TxVgaFor50[22].ChanNo = 112;
pHwData->TxVgaFor50[22].TxVgaValue = pTxVga[13];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[20].ChanNo = 104;
pHwData->TxVgaFor50[21].ChanNo = 108;
stmp = pTxVga[13] - pTxVga[12];
- pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp/3;
- pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp*2/3;
+ pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp / 3;
+ pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp * 2 / 3;
- //channel 128
+ /* channel 128 */
pHwData->TxVgaFor50[26].ChanNo = 128;
pHwData->TxVgaFor50[26].TxVgaValue = pTxVga[14];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[23].ChanNo = 116;
pHwData->TxVgaFor50[24].ChanNo = 120;
pHwData->TxVgaFor50[25].ChanNo = 124;
stmp = pTxVga[14] - pTxVga[13];
- pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp/4;
- pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp*2/4;
- pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp*3/4;
+ pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp / 4;
+ pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp * 3 / 4;
- //channel 140
+ /* channel 140 */
pHwData->TxVgaFor50[29].ChanNo = 140;
pHwData->TxVgaFor50[29].TxVgaValue = pTxVga[15];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[27].ChanNo = 132;
pHwData->TxVgaFor50[28].ChanNo = 136;
stmp = pTxVga[15] - pTxVga[14];
- pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp/3;
- pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp*2/3;
+ pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp / 3;
+ pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp * 2 / 3;
- //channel 149
+ /* channel 149 */
pHwData->TxVgaFor50[30].ChanNo = 149;
pHwData->TxVgaFor50[30].TxVgaValue = pTxVga[16];
- //channel 165
+ /* channel 165 */
pHwData->TxVgaFor50[34].ChanNo = 165;
pHwData->TxVgaFor50[34].TxVgaValue = pTxVga[17];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[31].ChanNo = 153;
pHwData->TxVgaFor50[32].ChanNo = 157;
pHwData->TxVgaFor50[33].ChanNo = 161;
stmp = pTxVga[17] - pTxVga[16];
- pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp/4;
- pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp*2/4;
- pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp*3/4;
+ pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp / 4;
+ pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4;
}
#ifdef _PE_STATE_DUMP_
- printk(" TxVgaFor24 : \n");
- DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
- printk(" TxVgaFor50 : \n");
- DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
+ printk(" TxVgaFor24 :\n");
+ DataDmp((u8 *)pHwData->TxVgaFor24, 14 , 0);
+ printk(" TxVgaFor50 :\n");
+ DataDmp((u8 *)pHwData->TxVgaFor50, 70 , 0);
#endif
}
-void BBProcessor_RateChanging( struct hw_data * pHwData, u8 rate ) // 20060613.1
+void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate)
{
struct wb35_reg *reg = &pHwData->reg;
- unsigned char Is11bRate;
+ unsigned char Is11bRate;
Is11bRate = (rate % 6) ? 1 : 0;
- switch( pHwData->phy_type )
- {
- case RF_AIROHA_2230:
- case RF_AIROHA_2230S: // 20060420 Add this
- if( Is11bRate )
- {
- if( (reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
- (reg->BB4C != BB4C_DEFAULT_AL2230_11B) )
- {
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11B );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B );
- }
+ switch (pHwData->phy_type) {
+ case RF_AIROHA_2230:
+ case RF_AIROHA_2230S:
+ if (Is11bRate) {
+ if ((reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
+ (reg->BB4C != BB4C_DEFAULT_AL2230_11B)) {
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11B);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B);
}
- else
- {
- if( (reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
- (reg->BB4C != BB4C_DEFAULT_AL2230_11G) )
- {
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11G );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G );
- }
+ } else {
+ if ((reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
+ (reg->BB4C != BB4C_DEFAULT_AL2230_11G)) {
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11G);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G);
}
- break;
-
- case RF_WB_242: // 20060623 The fix only for old TxVGA setting
- if( Is11bRate )
- {
- if( (reg->BB48 != BB48_DEFAULT_WB242_11B) &&
- (reg->BB4C != BB4C_DEFAULT_WB242_11B) )
- {
- reg->BB48 = BB48_DEFAULT_WB242_11B;
- reg->BB4C = BB4C_DEFAULT_WB242_11B;
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11B );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11B );
- }
+ }
+ break;
+ case RF_WB_242:
+ if (Is11bRate) {
+ if ((reg->BB48 != BB48_DEFAULT_WB242_11B) &&
+ (reg->BB4C != BB4C_DEFAULT_WB242_11B)) {
+ reg->BB48 = BB48_DEFAULT_WB242_11B;
+ reg->BB4C = BB4C_DEFAULT_WB242_11B;
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11B);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11B);
}
- else
- {
- if( (reg->BB48 != BB48_DEFAULT_WB242_11G) &&
- (reg->BB4C != BB4C_DEFAULT_WB242_11G) )
- {
- reg->BB48 = BB48_DEFAULT_WB242_11G;
- reg->BB4C = BB4C_DEFAULT_WB242_11G;
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11G );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11G );
- }
+ } else {
+ if ((reg->BB48 != BB48_DEFAULT_WB242_11G) &&
+ (reg->BB4C != BB4C_DEFAULT_WB242_11G)) {
+ reg->BB48 = BB48_DEFAULT_WB242_11G;
+ reg->BB4C = BB4C_DEFAULT_WB242_11G;
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11G);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11G);
}
- break;
+ }
+ break;
}
}
-
-
-
-
-
-
--
1.7.0.2
More information about the devel
mailing list