[PATCH 344/368] Staging: comedi: dt2801.c: Checkpatch cleanup

[Greg KH]

From: Andrea Gelmini <andrea.gelmini at gelma.net>

ERROR: code indent should use tabs where possible
+          0 = [-10,10]$

ERROR: code indent should use tabs where possible
+          0 = [-10,10]$

WARNING: braces {} are not necessary for single statement blocks
+		if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+			return stat;
+		}

WARNING: braces {} are not necessary for single statement blocks
+		if (stat & DT_S_COMPOSITE_ERROR) {
+			return stat;
+		}

WARNING: braces {} are not necessary for single statement blocks
+	if (stat & DT_S_READY) {
+		return 0;
+	}

WARNING: braces {} are not necessary for single statement blocks
+		if (stat & DT_S_COMPOSITE_ERROR) {
+			return stat;
+		}

WARNING: braces {} are not necessary for single statement blocks
+		if (stat & DT_S_READY) {
+			return 0;
+		}

WARNING: braces {} are not necessary for single statement blocks
+	if (!(stat & DT_S_READY)) {
+		printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
+	}

WARNING: braces {} are not necessary for single statement blocks
+	if (!timeout) {
+		printk("dt2801: timeout 1 status=0x%02x\n", stat);
+	}

WARNING: braces {} are not necessary for single statement blocks
+	if (!timeout) {
+		printk("dt2801: timeout 2 status=0x%02x\n", stat);
+	}

WARNING: braces {} are not necessary for any arm of this statement
+		if (stat == -ETIME) {
[...]
+		} else {
[...]

Signed-off-by: Andrea Gelmini <andrea.gelmini at gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/staging/comedi/drivers/dt2801.c |   33 +++++++++++-------------------
 1 files changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index 7b9af5d..3f365ae 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -18,10 +18,10 @@ Configuration options:
   [1] - unused
   [2] - A/D reference 0=differential, 1=single-ended
   [3] - A/D range
-          0 = [-10,10]
+	  0 = [-10, 10]
 	  1 = [0,10]
   [4] - D/A 0 range
-          0 = [-10,10]
+	  0 = [-10, 10]
 	  1 = [-5,5]
 	  2 = [-2.5,2.5]
 	  3 = [0,10]
@@ -279,9 +279,8 @@ static int dt2801_readdata(struct comedi_device *dev, int *data)
 
 	do {
 		stat = inb_p(dev->iobase + DT2801_STATUS);
-		if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+		if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY))
 			return stat;
-		}
 		if (stat & DT_S_DATA_OUT_READY) {
 			*data = inb_p(dev->iobase + DT2801_DATA);
 			return 0;
@@ -315,9 +314,8 @@ static int dt2801_writedata(struct comedi_device *dev, unsigned int data)
 	do {
 		stat = inb_p(dev->iobase + DT2801_STATUS);
 
-		if (stat & DT_S_COMPOSITE_ERROR) {
+		if (stat & DT_S_COMPOSITE_ERROR)
 			return stat;
-		}
 		if (!(stat & DT_S_DATA_IN_FULL)) {
 			outb_p(data & 0xff, dev->iobase + DT2801_DATA);
 			return 0;
@@ -354,18 +352,15 @@ static int dt2801_wait_for_ready(struct comedi_device *dev)
 	int stat;
 
 	stat = inb_p(dev->iobase + DT2801_STATUS);
-	if (stat & DT_S_READY) {
+	if (stat & DT_S_READY)
 		return 0;
-	}
 	do {
 		stat = inb_p(dev->iobase + DT2801_STATUS);
 
-		if (stat & DT_S_COMPOSITE_ERROR) {
+		if (stat & DT_S_COMPOSITE_ERROR)
 			return stat;
-		}
-		if (stat & DT_S_READY) {
+		if (stat & DT_S_READY)
 			return 0;
-		}
 	} while (--timeout > 0);
 
 	return -ETIME;
@@ -382,9 +377,8 @@ static int dt2801_writecmd(struct comedi_device *dev, int command)
 		printk
 		    ("dt2801: composite-error in dt2801_writecmd(), ignoring\n");
 	}
-	if (!(stat & DT_S_READY)) {
+	if (!(stat & DT_S_READY))
 		printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
-	}
 	outb_p(command, dev->iobase + DT2801_CMD);
 
 	return 0;
@@ -418,9 +412,8 @@ static int dt2801_reset(struct comedi_device *dev)
 		if (stat & DT_S_READY)
 			break;
 	} while (timeout--);
-	if (!timeout) {
+	if (!timeout)
 		printk("dt2801: timeout 1 status=0x%02x\n", stat);
-	}
 
 	/* printk("dt2801: reading dummy\n"); */
 	/* dt2801_readdata(dev,&board_code); */
@@ -436,9 +429,8 @@ static int dt2801_reset(struct comedi_device *dev)
 		if (stat & DT_S_READY)
 			break;
 	} while (timeout--);
-	if (!timeout) {
+	if (!timeout)
 		printk("dt2801: timeout 2 status=0x%02x\n", stat);
-	}
 
 	DPRINTK("dt2801: reading code\n");
 	dt2801_readdata(dev, &board_code);
@@ -623,11 +615,10 @@ static int dt2801_detach(struct comedi_device *dev)
 static int dt2801_error(struct comedi_device *dev, int stat)
 {
 	if (stat < 0) {
-		if (stat == -ETIME) {
+		if (stat == -ETIME)
 			printk("dt2801: timeout\n");
-		} else {
+		else
 			printk("dt2801: error %d\n", stat);
-		}
 		return stat;
 	}
 	printk("dt2801: error status 0x%02x, resetting...\n", stat);
-- 
1.7.0.1